Control panel. MGE UPS Systems 5103304XXX, 5103304 Comet EXtreme, 5103359 Comet EXtreme, Comet EXtreme 4.5
Add to my manuals
32 Pages
advertisement
▼
Scroll to page 2
of 32
1. Presentation
1.3 Control panel
Alarms
11
UPS overload
% battery
remaining
100%
12 electronics fault
80%
50% 13 battery fault
14
15
16 ambient temp.
> 40
°
C hold down to display percent load.
lamp test or buzzer OFF.
20%
17
18 operation on manual bypass.
operation in Automatic Bypass mode.
19
20 operation in ON-LINE mode.
operation on battery power.
21
ON/OFF.
% load
100%
80%
50%
20%
Page 12 -
86-153719-00 B00
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What is the normal battery voltage for all models of the MGE UPS Systems Comet EXtreme UPS?
The normal battery voltage for all models is 240 VDC.
What is the maximum number of modules that can be stacked on top of each other if the UPS is positioned flat?
No more than five modules can be stacked on top of each other.
What should be done if the UPS remains de-energized for a long period?
It is recommended to energize the UPS for a period of 24 hours, at least once every month, to charge the battery and avoid possible irreversible damage.
What are some important safety instructions to follow when using the MGE UPS Systems Comet EXtreme UPS?
The UPS must be properly earthed, never operated in high temperatures or humidity, and protected from liquids, foreign objects, and direct sunlight.
What is the function of the ON / OFF conditions tab in the personalization settings?
The ON / OFF conditions tab allows users to customize the UPS's behavior during power on and off events, including setting the delay time for the UPS to start or shut down.
advertisement