Start-up. MGE UPS Systems 5103304XXX, 5103304 Comet EXtreme, 5103359 Comet EXtreme, Comet EXtreme 4.5
Add to my manuals
32 Pages
advertisement
3. Operation
3.2 Start-up
The protected equipment connected to the UPS can be energized, whether AC input power is available or not.
Prior to initial start-up, check the UPS voltage settings. If the protected equipment voltage is other than 208 V / 60 Hz, the UPS settings must be modified using the "UPS Driver" software
24
(see section 3.5).
2
21
All connected equipment is energized. The buzzer sounds.
3.3 Bargraph indications
11
12
13
14
15
1. Remaining backup time in percent (in ON-LINE mode).
2. Percent load drawn by the protected equipment,
3. Operating faults (flashing LED and beeps):
11 Overload.
12
UPS fault.
13
Battery fault.
14
Excessive ambient temperature.
Page 20 -
86-153719-00 B00
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What is the normal battery voltage for all models of the MGE UPS Systems Comet EXtreme UPS?
What is the maximum number of modules that can be stacked on top of each other if the UPS is positioned flat?
What should be done if the UPS remains de-energized for a long period?
What are some important safety instructions to follow when using the MGE UPS Systems Comet EXtreme UPS?
What is the function of the ON / OFF conditions tab in the personalization settings?
advertisement