| Configure | 287
Option
Automatic Login
Share Session
Domain
Init Remote Folder
Description
When enabled, users do not need to provide login credentials. The session will be established using the specified user name and password.
When enabled, users can use the same connection simultaneously, allowing them to see the same screen.
Domain that the user is allowed to access.
Remote directory. After successful authentication, the user is redirected to the specified folder on the remote server.
Bookmark Groups
Bookmark groups allow you to combine bookmarks for easy reference. For example, you can create a group containing all of the bookmarks for remote desktops so that you do not need to specify access on an individual basis.
Related tasks
Add a Clientless Access Policy
on page 285
Add a Bookmark Group
1. Go to Configure > VPN > Bookmark Groups and click Add.
2. Enter a name.
3. Click Add New Item and select bookmarks.
Figure 293: Add Bookmark Group
PPTP (Remote Access)
This page describes how to configure PPTP remote access.
The Point-to-Point Tunneling Protocol allows organizations to extend their own private network through private tunnels over the public Internet.
The device supports several authentication options including Password Authentication Protocol (PAP), Challenge
Handshake Authentication Protocol (CHAP), and Microsoft Challenge Handshake Authentication Protocol (MS-
CHAPv2).
The PPTP (Remote Access) page provides options to configure the device as PPTP server and enable/disable remote access through PPTP to various users.
1. Go to Configure > VPN > PPTP (Remote Access).
2. Click to enable PPTP.
3. Specify the General Settings.
Assign IP from
Specify IP address range. PPTP server will lease IP address to the PPTP client from the specified IP address range. The PPTP client uses the assigned IP address as its source address for the duration of the connection.
Do not specify the same IP address range in L2TP configuration and PPTP configuration.
Allow leasing IP Address from Radius server for L2TP, PPTP and CISCO VPN Client
Click to lease the IP address to the PPTP users through the Radius server.
Radius server is a protocol that allows network devices to authenticate users against a central database. It can also store technical information used by network devices.
If enabled, the configured IP address is overridden with the IP address provided by the Radius server.
| Configure | 288
Figure 294: General Settings
4. Specify the Client Information.
Primary DNS Server
Select the DNS server to be used at the client end.
Secondary DNS Server
Select the alternate DNS server to be used at the client end.
Primary WINS Server
Specify the WINS server to be used at the client end.
Secondary WINS Server
Specify the alternate WINS server to be used at the client end.
Figure 295: Client Information
5. Click Apply to save the configuration.
6. Use the other buttons if required.
Add Member(s) (available only if PPTP is configured)
Click to select users who are to be allowed remote access through PPTP.
Show Members (available only if PPTP is configured)
Click to view a list of PPTP members.
Related tasks
Add PPTP Member
on page 288
PPTP Members
on page 289
Add PPTP Member
