Dependent entities for the selected entity will also be exported if Include dependent entity is selected.
Export
Click to export the configuration from the device.
| System | 510
Figure 476: Export Configuration
Firmware
This feature is not available in Sophos Firewall Manager (SFM).
The Firmware page allows you to manage the firmware versions on your device. It also enables you to install hotfixes and to choose the default configuration language of your device.
The Firmware section displays the list of firmware versions that have been downloaded. A maximum of two firmware versions are available simultaneously and one of the versions is active.
Upload firmware
Click to upload new firmware. Click Browse in the pop-up window. Click Upload firmware to upload the firmware image file. The uploaded firmware becomes active after the next reboot.
Click Upload & Boot to upload the firmware image file and boot the device. The action upgrades the device to the new version, closes all sessions, restarts the device, and displays the login page.
The process may take a few minutes since it involves migrating the entire configuration.
At the time of uploading new firmware, the error "New Firmware could not be uploaded" might occur due to one of the following reasons:
1. Wrong upgrade file - You are trying to upload wrong upgrade file i.e. a previous version firmware.
2. Incorrect firmware image - You are trying to upload incorrect firmware image for your appliance model. All the firmware's are model specific and are not inter-changeable. Hence, firmware of one model is not applicable on another model. For example, an error is displayed, if appliance model XG125 is upgraded with firmware for model XG750.
3. Incompatible firmware - You are trying to upload incompatible firmware.
4. Changes in Appliances Hardware - Your appliance hardware configuration is not the standard hardware configuration. Contact support for assistance.
5. Corrupt firmware - There are chances that the firmware you have downloaded is corrupt.
Boot firmware image
Click to upgrade the device to the uploaded firmware image. The action upgrades the device to the new version, closes all sessions, restarts the device and displays the login page.
Boot with factory default configuration
Click to reboot the device and to activate the default configuration.
Note: If you boot with factory default configuration, the current configuration will be lost. Take a backup before you click this option.
Active
The Active icon against a firmware version indicates that the device currently uses this firmware.
Latest Available Firmware (not available in SFM)
Check For new Firmware
Click to view the new firmware, if available.
Firmware Version
Displays the list of firmware versions available for download.
Type
Displays the type of each firmware.
Available Options:BetaGA
Actions
Click Download to download the firmware. Once the download is complete, click Install to install the firmware.
| System | 511
Figure 477: Available Latest Firmware
SF-OS Hot-fix
Allow auto-install of important Hot-fixes
Hot-fixes are installed automatically when they are available. Clear the check box if you do not want to apply them automatically.
Click Apply to save your selection.
Default: Enabled
Figure 478: SF-OS Hot-Fix
Factory Reset with Default Configuration Language
Default Configuration Language
Select a default language for configuration. When you choose a different language, the device reboots and goes back to the factory default settings. It removes all customizations.
The Admin Console Language can differ from the Default Configuration Language. Choosing a different Admin Console Language displays menus and labels in the selected language while choosing a different Default Configuration Language displays menus, labels as well as default policies and their description in the selected language.