advertisement
Setup Adjustment
1
2
MENU
Press to display the MAIN MENU, and then to the SETUP menu.
Press to select the desired function.
CHILD LOCK
If the Child-Lock function is set ON, picture and sound of the TV/
AV mode being viewed will disappear and a Black screen will appear.
Press to adjust or change the function.
BLUE BACK
You can choose Blue Back display ON or OFF when there is no signal.
SETUP
TELETEXT
OFF TIMER
CH COLOUR SET
CHILD LOCK
BLUE BACK
ILLUMINATION
FLICKER REDUC.
TOP
OFF
OFF
ON
ON
OFF
SETUP
3D-COMB
PICTURE SHIFT
TUNING MENU
OWNER ID
CONVERGENCE
ON
ON
ILLUMINATION
Select “ON” to illuminate the ILLUMINATION LIGHT on the front panel. Otherwise, select “OFF”.
3
TV/AV
Press to go back to watching TV.
FLICKER REDUCTION
Lets you control any picture movement. Set to ON to activate motion compensation, to smooth the image and get rid of picture movement. Set to Off to have no flicker reduction at aIl, occasional broadcasts may benefit from using this setting.
ON OFF
OFF TIMER
Switches the TV off within a preset time which you can choose from between 0 to 90 minutes in 15 minutes intervals.
OFF 15 30 45
90 75 60
3D-COMB
You can choose 3D-COMB function ON or OFF. If the 3D-COMB function is ON, dot interference or cross colour will be reduced.
Note: Not available in component and RGB input.
CH COLOUR SET
Colour density varying between broadcast channels can be adjusted to three levels for each reception channel.
PICTURE SHIFT
For use as a screen saver, this function changes the entire picture position (shift) approximately 2 mm every 15 minutes.
During AV mode, the appearance of the SETUP MENU will differ from that of the TV mode, with the following function adjustments becoming available.
SETUP
OFF TIMER
CH COLOUR SET
CHILD LOCK
BLUE BACK
ILLUMINATION
VCR/GAME
COLOUR SYS
OFF
OFF
ON
ON
OFF
AUTO
SETUP
COLOUR MATRIX
3D-COMB
PICTURE SHIFT
OWNER ID
CONVERGENCE
SD
ON
ON
COLOUR SYSTEM
During AV mode, COLOUR SYSTEM is displayed.
If a clear picture with current colours cannot be obtained when a
Broadcast or AV signal is received, then the colour system will change as shown.
AUTO PAL SECAM
NTSC3.58 NTSC4.43
PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries.
NTSC 4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL television equipment.
VCR/GAME
Reproduction of irregular signals, such as certain TV games and rental video tapes, may be improved.
COLOUR MATRIX
Displays 480p/575p input signals in a natural colour from digital equipment adapters connected to COMPONENT VIDEO INPUT
(Y, P
B
, P
R
) terminals. Select HD or SD to automatically adjust colour parameters for HD (high definition) or SD(standard definition). SD: When the input signal is a normal TV system
(NTSC). HD: When the input signal is a High-Definition system.
Note: This feature is available only with 525p/625p (480p/575p) signal and not available with 525i/625i(480i/575i) signal.
23
advertisement
Key Features
- Wide projection for an immersive viewing experience
- Convergence adjustment for optimal picture quality
- Fine tuning for precise channel reception
- Variety of input and output terminals for easy connectivity
- Advanced picture and sound quality for an enhanced viewing experience
- Multi-screen and multi-PIP capabilities for multitasking