PRODUCT SAFETY. DVIGear DVI-5314c

Add to My manuals
12 Pages

advertisement

PRODUCT SAFETY. DVIGear DVI-5314c | Manualzz

WARNING – Product Safety

1. Do not dismantle the product housing or modify the printed circuit board module as this may result in electrical shock or burn.

2. Do not attempt to service this product yourself as opening or removing the product housing may expose you to dangerous voltages or other hazards.

Refer all servicing to qualified service personnel.

3. Keep this product away from liquids. Spills into the product housing may result in fire, electrical shock, or equipment damage. If liquid spills into the housing, unplug the product immediately. Have the product checked by a qualified service engineer before using it again.

4. Place the product in an even and stable location. If the product falls or is dropped, it may cause an injury and/or malfunction.

5. Avoid exposing the product to extreme temperatures or to high humidity levels as this may result in damage to the product.

6. Only use the supplied External AC Power Adapter. The use of other power adapters may cause this product to fail or may cause a fire.

7. Do not twist or exert excessive force on the ends of the connected cables as this can cause them to malfunction. Take care to ensure that all connected cables are not forced to bend more than their minimum bend radius.

Product Liability

Every effort has been made to ensure that this product is free of defects.

DVIGear cannot be held liable for the use of this product or for any direct or indirect consequential damages arising from its use. It is the responsibility of the users of this product to check that it is suitable for their requirements and that it is installed correctly.

All rights are reserved. No parts of this manual may be reproduced or transmitted by any form or means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without the written consent of DVIGear.

DVIGear reserves the right to revise any of its hardware and software, following its policy to modify and/or improve its products where necessary or desirable.

This statement does not affect the legal rights of the user in any way. All third-party trademarks and copyrights are recognized. The DVIGear logo is a registered trademark of DVIGear, Inc. HDMI™ is a registered trademark of

HDMI LLC. All other trademarks are the property of their respective holders.

-1-

advertisement

Related manuals

advertisement