advertisement
Performing test printing of the printer unit
●
Performing test printing of the printer unit
In order to check whether the printer unit is operating correctly or there is a printer communication problem, you can perform test printing.
Connect the instrument and a printer correctly and perform the following procedure for test printing. As a result of test printing, if the printout is as shown below, the printer unit is operating correctly.
1. Press the key to enter the setting mode.
2. Press the keys to select the "MAINT" (maintenance setting) and then press
key key
3. Press the keys to select the "PRINT" (test print) and then press the key.
Printing starts automatically. The printer icon blinks during printing. When printing ends, the printer icon lights and "END" appears. Press the key.
To return to the setting mode, press the key.
key
Printed
42 HORIBA
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 16 Part names and basic operation
- 17 Names of each part
- 17 Instrument
- 18 Display
- 20 Operation key
- 21 Basic operation
- 21 Changing the operation mode
- 22 Changing the measurement parameter
- 23 Using the backlight
- 24 Entering numeric values
- 26 Measurement
- 27 Preparation
- 27 Confirmation before starting measurement
- 28 Turning ON the instrument
- 30 Setting the date and time
- 31 Connecting an electrode
- 32 Conductivity measurement
- 33 Setting the instrument
- 38 Performing salinity calibration
- 40 Performing measurement
- 42 Using various functions
- 44 Saving measurement data in the internal memory
- 45 Displaying saved data
- 46 Deleting all saved data
- 47 Deleting calibration data
- 49 Printing measured values and calibration data
- 51 Transferring saved data to a PC
- 52 Operating the instrument from an external device
- 53 Using the automatic data save (default: OFF)
- 55 Setting the ID number (default: 000)
- 56 Calibrating temperature sensor
- 57 Changing the automatic power off setting (default: OFF)
- 58 Performing test printing of the printer unit
- 59 Resetting to factory default settings
- 61 Maintenance
- 61 Maintenance and storage of the instrument
- 61 Environmental conditions for storage
- 62 Maintenance and storage of the conductivity cell
- 63 Checking and calibrating the conductivity cell
- 65 How to resolve errors or troubles
- 65 When an error message appears
- 67 Troubleshooting
- 67 The indicated value fluctuates
- 67 The response is slow
- 68 The indicated value does not change/No response
- 68 The measured value blinks
- 68 Repeatability of the measured value is poor
- 69 The temperature display blinks or is fixed at 25°C
- 69 Nothing appears when the power is turned ON
- 69 Swelling of operation key sheet
- 70 Part of the display is missing
- 71 Appendix
- 71 Main specifications
- 73 Table of conductivity cell range
- 74 Table of conductivity cell range (resistivity range)
- 75 Instrument default settings
- 76 Technical note
- 76 Conductivity measurement
- 78 For more information
- 79 Options