advertisement
Instrument default settings
■
Instrument default settings
Measurement parameter
Common
Conductivity
Salinity
Item
Selection item/Setting range
Temperature setting
Temperature input value
Auto power off
Auto power off time
Sample ID
Cell constant
Automatic (ATC)/
Manual (MTC)
0.0°C to 100.0°C
ON/OFF
1 min to 30 min
000 to 2999
Auto data memory ON/OFF
Auto data memory time 2 seconds to 24 hours
0.700 to 1.300
(10 m
-1
, 100 m
-1
,
1000 m
-1
)
Temperature conversion ON/OFF
Temperature coefficient 0.00%/°C to 10.00%/°C
Unit
Unit
S/m, S/cm, mS/cm FIX
PPT, %
Default values
Automatic (ATC)
25.0°C
OFF
30 min
000
OFF
2 seconds
1.000
(100 m
-1
)
ON
2.00%/°C
S/m
PPT
ES-71 59
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 16 Part names and basic operation
- 17 Names of each part
- 17 Instrument
- 18 Display
- 20 Operation key
- 21 Basic operation
- 21 Changing the operation mode
- 22 Changing the measurement parameter
- 23 Using the backlight
- 24 Entering numeric values
- 26 Measurement
- 27 Preparation
- 27 Confirmation before starting measurement
- 28 Turning ON the instrument
- 30 Setting the date and time
- 31 Connecting an electrode
- 32 Conductivity measurement
- 33 Setting the instrument
- 38 Performing salinity calibration
- 40 Performing measurement
- 42 Using various functions
- 44 Saving measurement data in the internal memory
- 45 Displaying saved data
- 46 Deleting all saved data
- 47 Deleting calibration data
- 49 Printing measured values and calibration data
- 51 Transferring saved data to a PC
- 52 Operating the instrument from an external device
- 53 Using the automatic data save (default: OFF)
- 55 Setting the ID number (default: 000)
- 56 Calibrating temperature sensor
- 57 Changing the automatic power off setting (default: OFF)
- 58 Performing test printing of the printer unit
- 59 Resetting to factory default settings
- 61 Maintenance
- 61 Maintenance and storage of the instrument
- 61 Environmental conditions for storage
- 62 Maintenance and storage of the conductivity cell
- 63 Checking and calibrating the conductivity cell
- 65 How to resolve errors or troubles
- 65 When an error message appears
- 67 Troubleshooting
- 67 The indicated value fluctuates
- 67 The response is slow
- 68 The indicated value does not change/No response
- 68 The measured value blinks
- 68 Repeatability of the measured value is poor
- 69 The temperature display blinks or is fixed at 25°C
- 69 Nothing appears when the power is turned ON
- 69 Swelling of operation key sheet
- 70 Part of the display is missing
- 71 Appendix
- 71 Main specifications
- 73 Table of conductivity cell range
- 74 Table of conductivity cell range (resistivity range)
- 75 Instrument default settings
- 76 Technical note
- 76 Conductivity measurement
- 78 For more information
- 79 Options