advertisement
System Start Up
4.3 Selecting the Language
The meter can be operated in several different languages. When the meter is turned on for the first time, the user must select a language before any other meter functions can be accessed.
To select or change the language:
1. Press the
METER OPTIONS
key.
2. Use the
UP
and
DOWN
keys to highlight Language. Press the
GREEN/RIGHT
key under Select.
3. Use the
UP
and
DOWN
keys to select a language. Press the
GREEN/RIGHT
key under OK.
4.4 Setting the Date and Time
CAUTION
BEFORE ATTACHING THE PROBE FOR THE FIRST TIME: Set the date and time in the meter before attaching the probe for its first use. If the meter date and time are incorrect when the probe is installed, the probe will retain this incorrect time stamp for the remainder of its service life.
To change the time and date that is displayed on the meter:
1. Press the
METER OPTIONS
key.
2. Use the
UP
and
DOWN
keys to highlight Time. Press the
GREEN/RIGHT
key under Select.
22
System Start Up
3. By default, time entries use the 24-hour clock format. Use the
UP
and
DOWN
keys to highlight Set Time, Time Format, Set
Date, or Date Format. Press the
GREEN/RIGHT
key under
Select.
SET TIME
Use the
UP
and
DOWN
keys to change the time. Press the
GREEN/RIGHT
key to advance to the next space.
Press the
GREEN/RIGHT
key until OK replaces the right arrow in the function bar. Select OK to complete the entry. All time entry is in
24-hour format.
TIME FORMAT
Use the
UP
and
DOWN
keys to select an AM/PM (12-hour) or
24-hour time clock. Press the
GREEN/RIGHT
key under OK.
SET DATE
By default, date entries use the day-month-year format. Use the
UP
and
DOWN
keys to change the date. Press the
GREEN/RIGHT
key to advance to the next space. Press the
GREEN/RIGHT
key until OK replaces the right arrow in the function bar. Select OK to complete the entry.
DATE FORMAT
Use the
UP
and
DOWN
keys to select a date format. Press the
GREEN/RIGHT
key under OK.
23
Visit us at www.hach.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 Section 1 General Information
- 7 1.1 Safety Information
- 7 1.1.1 Use of Hazard Information
- 7 1.1.2 Precautionary Labels
- 8 1.2 Product Overview
- 8 1.3 Meter Description
- 9 Section 2 Specifications
- 11 Section 3 Installation
- 11 3.1 Unpacking the Instrument
- 12 3.2 AC Power and Batteries
- 12 3.2.1 Battery Power
- 14 3.2.2 AC Power
- 14 3.3 Turning the Meter On and Off
- 14 3.4 Probe Connection
- 16 3.5 Data Transfer (HQ40d only)
- 19 Section 4 System Start Up
- 19 4.1 Basic Start Up Overview
- 20 4.2 Meter User Interface and Navigation
- 20 4.2.1 Keypad Description
- 21 4.2.2 Display Description (Single and Dual)
- 21 4.2.2.1 Using Single Screen Mode
- 21 4.2.2.2 Using Dual Screen Mode (HQ40d only)
- 22 4.3 Selecting the Language
- 22 4.4 Setting the Date and Time
- 25 Section 5 Standard Operation
- 25 5.1 Setting the Sample and Operator Identification
- 25 5.1.1 Sample ID
- 25 5.1.1.1 Creating a New Sample ID
- 26 5.1.1.2 Selecting a Sample ID
- 26 5.1.1.3 Deleting a Sample ID
- 27 5.1.2 Operator ID
- 27 5.1.2.1 Creating a New Operator ID
- 27 5.1.2.2 Selecting an Operator ID
- 28 5.1.2.3 Deleting an Operator ID
- 28 5.2 Using the Data Log
- 28 5.2.1 Storing Data
- 28 5.2.2 Viewing Stored Data
- 29 5.2.3 Viewing Probe Data
- 30 5.2.4 Deleting Data
- 31 5.3 Transferring Data (HQ40d meter only)
- 31 5.3.1 Sending Data to a Printer or Flash Memory Stick
- 31 5.3.1.1 Selecting Report Options
- 32 5.3.1.2 Printing Calibration Data
- 33 5.3.2 Sending Data to a Computer
- 34 5.4 Viewing Data Log Reports (HQ40d only)
- 34 5.4.1 Report Names
- 34 5.4.2 Sample Results
- 34 5.4.2.1 Basic Reports
- 35 5.4.2.2 Advanced Reports
- 35 5.4.2.3 Total Reports
- 36 5.4.3 Calibration Results
- 37 5.4.4 Check Standard Results
- 38 5.5 Viewing Calibration Reports (HQ40d only)
- 38 5.5.1 Current Calibration Reports
- 39 5.5.2 Calibration History Reports
- 40 5.6 Archiving and Exchanging Methods (HQ40d only)
- 41 Section 6 pH Operation and Methods
- 41 6.1 Calibrating the pH Probe
- 42 6.1.1 Calibration Errors
- 42 6.1.1.1 Standard Not Recognized
- 42 6.1.1.2 Slope Error
- 43 6.2 Taking a pH Measurement
- 43 6.3 Running Check Standards Manually or Automatically
- 44 6.3.1 Deferring a Check Standard
- 45 6.4 Setting the pH Method
- 45 6.5 Modify Current Method Menu for pH Summary
- 46 6.5.1 Modifying pH Methods
- 47 6.5.2 Modifying the pH Measurement Options
- 49 6.5.3 Modifying the pH Calibration Options
- 52 6.5.4 Modifying the pH Check Standard Options
- 54 6.5.5 Modifying the pH Measurement Units
- 55 Section 7 Conductivity Operation and Methods
- 55 7.1 Calibrating the Conductivity Probe
- 56 7.2 Taking a Conductivity, Salinity, Resistivity, or TDS Measurement
- 57 7.3 Running Check Standards Manually or Automatically
- 58 7.3.0.1 Deferring a Check Standard
- 58 7.4 Setting the Conductivity Method
- 59 7.5 Modify Current Method Menu for Conductivity Summary
- 60 7.5.1 Modifying a Conductivity Method
- 60 7.5.2 Modifying the Conductivity Parameter
- 61 7.5.3 Modifying the Conductivity Measurement Options
- 64 7.5.4 Modifying the Conductivity Calibration Options
- 67 7.5.5 Modifying Conductivity Check Standard Options
- 71 Section 8 LDO Operation and Methods
- 71 8.1 Taking a Dissolved Oxygen Measurement
- 71 8.2 Calibrating the LDO Probe
- 73 8.2.1 Calibration Error- Slope Out of Range
- 73 8.3 Setting LDO Methods
- 74 8.4.1 Entering a New LDO Method
- 74 8.4 Modify Current Method Menu Summary
- 75 8.4.2 Modifying an LDO Method
- 75 8.4.3 Modifying LDO Measurement Options
- 77 8.4.4 Modifying the LDO Measurement Units
- 78 8.4.5 Selecting a LDO Calibration Setting
- 78 8.4.6 Selecting a LDO Method
- 79 8.4.7 Deleting a Method
- 81 Section 9 Advanced Operations
- 81 9.1 Meter Options Menu- Full Access
- 81 9.2 Operator Meter Options Menu
- 82 9.3 Using Access Control
- 82 9.3.1 Turning Access Control On
- 83 9.3.2 Turning Access Control Off
- 83 9.4 Running Check Standards
- 84 9.5 Setting the Measurement Mode
- 85 9.5.1 Setting Auto Measurement Intervals
- 86 9.5.2 Starting Interval Measurements
- 86 9.5.3 Preventing Data Log Overflow in Interval Reading Mode
- 87 9.6 Viewing Instrument Information
- 87 9.7 Setting the Display Options
- 88 9.8 Setting the Sound Options
- 89 9.9 Setting the Date and Time
- 89 9.10 Changing the Temperature Units
- 89 9.11 Language
- 91 Section 10 Maintenance
- 91 10.1 General Meter Cleaning
- 91 10.2 General Probe Cleaning
- 91 10.3 Battery Replacement
- 91 10.4 Updating Instrument Software
- 93 Section 11 Parts and Accessories
- 93 11.1 Parts
- 93 11.2 Accessories
- 94 11.3 Consumables
- 97 Section 12 How to Order
- 99 Section 13 Repair Service
- 101 Section 14 Certification
- 103 Section 15 Limited Warranty
- 105 Index