advertisement
▼
Scroll to page 2
of
18
Features of the Steam Press
Your Steam Press provides clean, Professional results every time!
. The pressing surface is seven times larger than most hand-held irons
. Can reduce ironing time up to 50%
. Multiple dry and steam settings; burst setting removes stubborn wrinkles
. Variable temperature control
. Automatic shut-off safety feature while porn or closed with audible alert
. Automatic wake-up feature
. Power indicator light
. Over 100Lbs.of even pressure makes for easy-to-use one hand operation
. Protects delicate fabrics like silk
. Non-stick ironing pad cover
. Locking handle makes unit portable
. Stores upright
. Operate sitting down or standing up
Steam Press Instruction Manual
Page 1
advertisement
Key Features
- Large pressing surface
- Multiple dry and steam settings
- Burst setting to remove stubborn wrinkles
- Variable temperature control
- Automatic shut-off safety feature
- Automatic wake-up feature
- Power indicator light
- Over 100 Lbs. of even pressure
- Protects delicate fabrics
Related manuals
Frequently Answers and Questions
How do I fill the water tank?
Always unplug the appliance BEFORE filling the tank. Fill the water tank with the Pressing Plate lifted to the raised (up) position. Slide the Water Tank towards the front of the unit. Using the Water Container, slowly pour the water into the Water Tank Fill Holes.
How do I use the steam burst feature?
The Steam Burst function can only be used when the Steam Ready Light is on AND the steam press is in an opened position. Do not use the Steam Burst function when the steam press is closed, or you may damage the unit.
What do I do if the automatic shut-off feature engages?
Push the ON/OFF switch to the OFF position and back to ON. Raise or lower the Pressing Plate to restart the heater.
How do I clean the pressing plate?
Place the Pressing Cushion in the center of the Ironing Board. Place a clean towel over the Pressing Cushion and the Ironing Board. Set the Steam, Control and Temperature Control to their maximum setting. Gently lower the Pressing Plate onto the Pressing Cushion. With water in the reservoir tank, press the Steam Burst Control 6 to 7 times. Avoid touching the hot metal surfaces or leaving your hand in the bursts of steam.