steam press instruction manual

The Steam Press is a great way to get professional-looking results on your clothes. It features a large pressing surface that is seven times larger than most hand-held irons, allowing you to press larger pieces of fabric quickly and efficiently. It also has multiple dry and steam settings, a burst setting to remove stubborn wrinkles, and a variable temperature control.

USE OF THE PRESSING CUSHION

Some garments have been constructed with details, such as darts. Curved seams and shoulder pads, which are not

intended to be pressed flat A Pressing Cushion is supplied with your Steam Press for use with these areas.

a. Use the cushion whenever pressing areas where no creases are desired or to shape tailored garments.

b. Place the area to be pressed onto the Ironing Board.

c. Place the pressing Cushion under the dart seam etc.

d. Making sure the area to be pressed is raised, lower the Pressing Plate. The raised area is the only area the Plate

should contact.

IMPORTANT NOTE: DO NOT attempt to lower the Pressing Plate to its lowest position or lock the Pressing Plate

against the Ironing Board with the Pressing Cushion in place. You MAY DAMAGE the Steam Press by doing so.

e. Raise the Pressing Plate after a few seconds.

Page 12

Steam Press Instruction Manual

Key Features

Large pressing surface
Multiple dry and steam settings
Burst setting to remove stubborn wrinkles
Variable temperature control
Automatic shut-off safety feature
Automatic wake-up feature
Power indicator light
Over 100 Lbs. of even pressure
Protects delicate fabrics

Related manuals

Frequently Answers and Questions

How do I fill the water tank?

Always unplug the appliance BEFORE filling the tank. Fill the water tank with the Pressing Plate lifted to the raised (up) position. Slide the Water Tank towards the front of the unit. Using the Water Container, slowly pour the water into the Water Tank Fill Holes.

How do I use the steam burst feature?

The Steam Burst function can only be used when the Steam Ready Light is on AND the steam press is in an opened position. Do not use the Steam Burst function when the steam press is closed, or you may damage the unit.

What do I do if the automatic shut-off feature engages?

Push the ON/OFF switch to the OFF position and back to ON. Raise or lower the Pressing Plate to restart the heater.

How do I clean the pressing plate?

Place the Pressing Cushion in the center of the Ironing Board. Place a clean towel over the Pressing Cushion and the Ironing Board. Set the Steam, Control and Temperature Control to their maximum setting. Gently lower the Pressing Plate onto the Pressing Cushion. With water in the reservoir tank, press the Steam Burst Control 6 to 7 times. Avoid touching the hot metal surfaces or leaving your hand in the bursts of steam.

Download PDF

steam press instruction manual

Key Features

Related manuals

Smartek

ST-X500

Reliable

Digital Steam Press

Sienna

ssp-1990

Reliable

Iron S330

Brookstone

Empressa S330

Pyle

Pure Clean PSTMP90

Sienna

ssp-3208

SINGER

ESP2

SINGER

ESP18

Sharper Image

The World's Largest Digital Steam Press

Frequently Answers and Questions

How do I fill the water tank?

How do I use the steam burst feature?

What do I do if the automatic shut-off feature engages?

How do I clean the pressing plate?

Table of contents