neo operation guide 11907-d 04-13

Operation without the controller

If you lose your controller, or the batteries go flat, you can still operate your unit using the control panel on the appliance.

Turning the heater on

Press the ON/OFF button once, you will hear the electronic ignition sparker. The electronic ignition stops when the pilot flame is established, the main burner then ignites off the pilot and will go to the highest setting. The blue LED power indicator will stay on, indicating the heater is in operation. Flame height may be adjusted after one minute of operation.

ON/OFF

LED power indicator

Increase

Decrease

To change the burner and fan settings press the UP and

DOWN arrows to increase or decrease the flame height.

Turning the heater off

Press the ON/OFF button once. The blue LED power indicator will turn off indicating that the appliance is in the off position.

LED indicators

On = blue

Standby = red

Off = nothing

ON/OFF

LED power indicator

Increase

Decrease

Standar d fr ame

6

7

4

5

2

3

1

Flame height

Fan speed

high low low low high high high ame

Premium C

(inbuilt mo lassic fr dels only)

The relationship between the flame height and fan speed is preset and cannot be independently adjusted.

16

| Neo operation guide: 11907-D 04-13