Burg-Wächter TSE Basic, SecuTronic Basic Operating instructions

Below you will find brief information for Number Lock TSE Basic, Number Lock SecuTronic Basic. These electronic locks offer a 6-digit code for secure access. Features include easy code changing (with door open), low-battery indication, and anti-tampering mechanisms with varying lockout times depending on the model.

PDF
Document
BURG-WÄCHTER TSE Basic, SecuTronic Basic Instructions | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • 6-digit code

  • 1.000.000 real possibilities

  • Manipulation block feature

  • Easy to install and use

  • Environmentally safe battery disposal

Frequently asked questions

To change the code, you must first power on the lock by pressing the "ON" button. Then, enter the old code (the default setting is 123456). Within 5 seconds, press and hold the "Enter" button until "Prog" lights up. Then, enter the new 6-digit code and press "Enter" again. If the code is entered correctly, the new code will be valid. If the code is entered incorrectly, the old code will remain valid. Please remember to memorize or write down the new code. You can test the new code multiple times with the door open.

If the lock displays "Maintenance required" then the lock needs servicing. Contact your dealer for further instructions.

To replace the batteries, use a screwdriver to open the battery compartment. Dispose of the old batteries in an environmentally safe manner. Then, install the new batteries, ensuring that the polarity is correct. Close the battery compartment.

User questions

A A

Patricia A.

What type of batteries does the TSE Basic device require for replacement?

No votes

The device requires 3x MIGNON, LR6, AA, AM 3, ALKALINE batteries. The step-by-step process is detailed in the Battery Replacement section of the manual.

Preparing document for printing…
0%