Audible Alarm. Promise Technology VTrack M-Class M500p, VTrak M200f, VTrak M500i, VTrak M300p, VTrak M500f, VTrak M500p, VTrak M300f, VTrak M300i, VTrak M200i, VTrak M200p

VTrak M-Class Product Manual

Disk Status

Power/Activity

Figure 4. VTrak M300f/i/p and M200f/i/p disk carrier LEDs

The VTrak spins up the disk drives sequentially in order to equalize power draw during start-up. After a few moments the Power/Activity and Disk Status LEDs should display green.

State

LEDs

Power/

Activity

Dark

No Drive

Steady

Green

Drive

Present

Flashing

Green

Activity

Status

No Power/

No Drive

Drive OK n/a

“n/a” means this state does not apply to this LED.

Amber n/a

Drive

Rebuilding

Red n/a

Drive

Error

See “Critical & Offline Disk Arrays” on page 280 for a discussion of rebuilding and

failed disk drives.

Audible Alarm

VTrak’s audible alarm has four sound patterns:

• Beep. Beep. Beep. – Indicates that a logical drive is rebuilding

• Beep-beep, beep-beep, beep-beep. – Indicates that a logical drive is critical

• Beep-beep-beep. Beep-beep-beep. – Indicates a problem with a field replaceable unit (FRU)

• 10 second continuous beep – Indicates that a logical drive is offline

See “Chapter 6: Maintenance” on page 209 for more information about field-

replaceable components.

See “Critical & Offline Disk Arrays” on page 280 for a discussion of critical and

offline logical drives.

To make alarm settings, see “Buzzer” on page 119.

60