Replace Power Supply - All Models. Promise Technology VTrack M-Class M500p, VTrak M200f, VTrak M500i, VTrak M300p, VTrak M500f, VTrak M500p, VTrak M300f, VTrak M300i, VTrak M200i, VTrak M200p
Add to my manuals
316 Pages
advertisement
VTrak M-Class Product Manual
Replace Power Supply – All Models
Figure 4. The VTrak M500f/i/p power supply shown above.The M300f/i/p and M200f/i/p are similar
The power supply and its fan are replaced as one unit. There are no individually serviceable parts. No tools are required for this procedure.
To remove the power supply, do the following:
1.
Verify that the power supply LED is amber or red.
2.
Switch off the power.
3.
Unplug the power cord.
4.
Press the release button and pull the handle downward as shown (above, left).
5.
Pull the power supply out of the VTrak enclosure (above, center).
To install the power supply, do the following:
1.
Carefully slide the power supply into the enclosure.
2.
Gently press the handle in and upward until it locks (above, right).
3.
Plug in the power cord.
4.
Switch on the power supply.
5.
Verify that the new power supply LED is green.
This completes the power supply replacement procedure.
214
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- High-performance, enterprise-class storage solution
- Support for both Fibre Channel and iSCSI connectivity
- Advanced features, such as RAID protection, snapshot capabilities, and thin provisioning
Related manuals
Frequently Answers and Questions
What is the Promise Technology VTrak M200i?
What types of connectivity does the VTrak M200i support?
What are some of the advanced features of the VTrak M200i?
What is the maximum storage capacity of the VTrak M200i?
What types of disk drives can be used with the VTrak M200i?
advertisement