Specifications. HP t5745 Thin Client, t5740e, t5740 Thin Client, t5740e Thin Client

A Specifications

Table A-1 HPt5740/t5745 Thin Client

Dimensions

Width (front to back)

Height (top to bottom, without stand)

Depth (side to side)

Approximate Weight

Temperature Range (fanless design)*

Operating**

(max. rate of change is 10° C per hour or 18° F per hour)

Nonoperating

(max. rate of change is 20° C per hour or 36° F per hour)

*Specifications are at sea level with altitude derating of

1° C/300m (1.8° F/1000ft) to a maximum of 3Km

(10,000ft), with no direct, sustained sunlight. Upper limit may be limited by the type and number of options installed.

Relative Humidity (non-condensing)

Operating

(max. wet bulb temperature is 28° C or 84.2° F)

Nonoperating

(max. wet bulb temperature is 38.7° C or 101.6° F)

Maximum Altitude (unpressurized)

Operating

(max. allowed rate of change is 457m per minute or 1500 ft per minute)

Nonoperating

(max. allowed rate of change is 457m per minute or 1500 ft per minute)

Power Supply

Operating Input Voltage Range

Rated Line Frequency

Power Output (maximum)

Rated Output Current (maximum)

Output Voltage

222 mm

255 mm

44 mm

1.53 kg

10° to 40° C

-30° to 60° C

10–90%

5–95%

3,048 m

9,144 m

100–240 VAC

50–60 Hz

65 W

3.42 A

+19 V DC

8.74 in.

10.04 in

1.73 in.

3.37 lb

50° to 104° F

-22° to 140° F

** The operating temperature range when the thin client is attached to a flat panel using the HP Quick

Release is 50° to 95° F (10° to 35° C).

10–90%

5–95%

10,000 ft

30,000 ft

100–240 VAC

50–60 Hz

65 W

3.42 A

+19 V DC

22 Appendix A Specifications ENWW