Website language. Bosch NDC-225-PI
Add to My manualsadvertisement
IP Camera 200 Series
6.3
Web Interface
Web Interface
> Appearance
>
>
LIVEPAGE Functions
Logging
6.3.1
Advanced Mode | en 41
Appearance
Adapt the appearance of the web interface and change the website language to meet your requirements. If necessary, replace the company's logo (top right) and the device name
(top left) in the top part of the window with individual graphics.
Either GIF or JPEG images can be used. The file paths must correspond to the access mode (for example,
C:\Images\Logo.gif for access to local files or http://www.myhostname.com/images/logo.gif for access via the Internet/Intranet). For access via the Internet/Intranet, there must be a connection in order to display the image. The image files are not stored on the camera.
To restore the original graphics, delete the entries in the
Company logo and Device logo fields.
Website language
Select the language for the user interface here.
Company logo
Enter the path to a suitable image in this field. The image can be stored on a local computer, a local network, or at an Internet address.
Note:
When the image was stored on a local computer, it can only be displayed by this local computer.
Device logo
Enter the path for a suitable image for the device logo in this field. The image can be stored on a local computer, a local network, or at an Internet address.
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01
advertisement
Related manuals
advertisement
Table of contents
- 30 Password
- 31 Confirm password
- 36 Camera ID
- 36 Camera name
- 36 Initiator extension
- 37 Password
- 37 Confirm password
- 38 Date format
- 38 Device date / Device time
- 38 Note:
- 38 Device time zone
- 38 Daylight saving time
- 39 Note:
- 39 Time server IP address
- 39 Time server type
- 39 Camera name stamping
- 40 Time stamping
- 40 Display milliseconds
- 40 Alarm mode stamping
- 40 Alarm message
- 40 Video watermarking
- 41 Website language
- 41 Company logo
- 41 Note:
- 41 Device logo
- 42 Transmit audio
- 42 Show alarm inputs
- 42 Show relay outputs
- 42 Show VCA metadata
- 42 Show event log
- 42 Show system log
- 43 Allow snapshots
- 43 Allow local recording
- 43 Path for JPEG and video files
- 43 Save event log
- 43 File for event log
- 43 Save system log
- 43 File for system log
- 44 Contrast (0...255)
- 44 Saturation (0...255)
- 44 Brightness (0...255)
- 44 White balance
- 44 R-gain
- 44 G-gain
- 45 B-gain
- 45 IR control
- 45 Default
- 46 Define profiles
- 47 Profile Configuration
- 47 Profile name
- 47 Target bit rate
- 47 Maximum bit rate
- 48 Encoding interval
- 48 Video resolution
- 48 Expert Settings
- 48 GOP structure
- 48 I-frame distance
- 48 I-frame quality
- 48 P-frame quality
- 49 Default
- 50 Select H.264 Settings
- 50 Preview >>
- 50 Note:
- 51 JPEG stream
- 51 Note:
- 52 Camera LED
- 52 Mirror image
- 52 Main frequency and Operation environment
- 52 Exposure/frame rate
- 52 Note:
- 54 Device manager
- 54 Note:
- 54 Recording media
- 54 iSCSI Media
- 55 Local Media
- 55 Note:
- 55 Activating and Configuring Storage Media
- 55 Note:
- 56 Note:
- 56 Formatting Storage Media
- 56 Deactivating Storage Media
- 58 Stream profile settings
- 58 Recording includes
- 58 Standard recording
- 59 Alarm recording
- 59 Alarm triggers
- 61 Weekdays
- 61 Holidays
- 62 Profile names
- 62 Activate recording
- 62 Recording status
- 63 Connect on alarm
- 63 Number of destination IP address
- 63 Destination IP address
- 63 Destination password
- 64 Video transmission
- 64 Stream
- 64 Remote port
- 64 Video output
- 65 Decoder
- 65 SSL encryption
- 65 Auto-connect
- 65 Audio
- 67 Aggregation time [s]
- 68 Analysis type
- 68 Motion detector
- 68 Note:
- 68 Sensitivity
- 69 Minimum object size
- 69 Debounce time 1 s
- 69 Selecting the area
- 69 Tamper detection
- 70 Sensitivity
- 70 Trigger delay [s]
- 70 Global change (slider)
- 70 Global change
- 70 Scene too bright
- 71 Scene too dark
- 71 Scene too noisy
- 71 Reference check
- 71 Disappearing edges
- 72 Appearing edges
- 72 Selecting the area
- 73 Weekdays
- 73 Holidays
- 73 Deleting Holidays
- 75 Trigger
- 75 Trigger active
- 75 Trigger inactive
- 75 Delay [s]
- 76 Audio alarm
- 76 Name
- 76 Signal Ranges
- 76 Threshold
- 76 Sensitivity
- 77 Send alarm e-mail
- 77 Mail server IP address
- 77 SMTP user name
- 77 SMTP password
- 77 Format
- 77 Attach JPEG from camera
- 78 Destination address
- 78 Sender name
- 78 Test e-mail
- 80 Name
- 80 Idle state
- 80 Operating mode
- 81 Relay follows
- 81 Relay name
- 81 Trigger relay
- 82 Automatic IP assignment
- 82 IP address
- 82 Subnet mask
- 83 Gateway address
- 83 DNS server address
- 83 Details >>
- 83 Video transmission
- 83 HTTP browser port
- 83 HTTPS browser port
- 84 RCP+ port 1756
- 84 Telnet support
- 84 Interface mode ETH
- 84 Network MSS [Byte]
- 84 iSCSI MSS [Byte]
- 84 Enable DynDNS
- 84 Note:
- 85 Host name
- 85 User name
- 85 Password
- 85 Force registration now
- 85 Status
- 86 SNMP
- 86 1. SNMP host address / 2. SNMP host address
- 86 SNMP traps
- 86 Authentication (802.1x)
- 87 RTSP port
- 87 UPnP
- 87 Note:
- 87 TCP metadata input
- 88 Enable
- 88 Multicast Address
- 88 Port
- 88 Streaming
- 88 Multicast packet TTL
- 89 File name
- 89 Posting interval
- 89 FTP server IP address
- 89 FTP server login
- 89 FTP server password
- 89 Path on FTP server
- 89 Max. bit rate
- 90 Firmware
- 91 Configuration
- 91 SSL certificate
- 92 Maintenance log
- 92 Note:
- 94 Display Stamping
- 99 Slide control
- 99 Bookmarks