advertisement
42 en | Advanced Mode
6.3.2
LIVEPAGE Functions
IP Camera 200 Series
In this window, adapt the Livepage functions to meet your requirements. Choose from a variety of different options for displaying information and controls.
1.
Mark the check boxes for the functions to be displayed on the Livepage. The selected elements are checked.
2.
Check the Livepage to see how the desired items are available.
Transmit audio
When selected, the audio from the camera (if on) is sent to the computer.
Show alarm inputs
The alarm inputs are displayed next to the video image as icons along with their assigned names. If an alarm is active, the corresponding icon changes color.
Show relay outputs
The relay output is shown next to the video image as an icon along with its assigned name. If a relay is switched, the icon changes color.
Show VCA metadata
When video content analysis (VCA) is activated, additional information is displayed in the live video stream. For example, in Motion+ mode, the sensor areas for motion detection are marked.
Show event log
The event messages are displayed with the date and time in a field next to the video image.
Show system log
The system messages are displayed with the date and time in a field next to the video image and provide information about the establishment and termination of connections, etc.
AR18-10-B012 | v1.5 | 2011.01
Installation and Operation Manual Bosch Security Systems
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement