advertisement
72 en | Advanced Mode IP Camera 200 Series
Appearing edges
Select this option if the selected area of the reference image includes a largely homogenous surface. If structures appear in this area, then an alarm is triggered.
Selecting the area
Select the image areas in the reference image that are to be monitored. The video image is subdivided into square fields.
Activate or deactivate each of these fields individually.
Select only those areas for reference monitoring in which no movement takes place and that are always evenly lit, as false alarms could otherwise be triggered.
1.
Click Select Area to configure the sensor fields. A new window opens.
2.
If necessary, click Clear All first to clear the current selection (fields marked yellow).
3.
Left-click the fields to be activated. Activated fields are marked yellow.
4.
If necessary, click Select All to select the entire video- frame for monitoring.
5.
Right-click any fields to deactivate.
6.
Click OK to save the configuration.
7.
Click the close button (X) in the window title bar to close the window without saving the changes.
AR18-10-B012 | v1.5 | 2011.01
Installation and Operation Manual Bosch Security Systems
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 30 Password
- 31 Confirm password
- 36 Camera ID
- 36 Camera name
- 36 Initiator extension
- 37 Password
- 37 Confirm password
- 38 Date format
- 38 Device date / Device time
- 38 Note:
- 38 Device time zone
- 38 Daylight saving time
- 39 Note:
- 39 Time server IP address
- 39 Time server type
- 39 Camera name stamping
- 40 Time stamping
- 40 Display milliseconds
- 40 Alarm mode stamping
- 40 Alarm message
- 40 Video watermarking
- 41 Website language
- 41 Company logo
- 41 Note:
- 41 Device logo
- 42 Transmit audio
- 42 Show alarm inputs
- 42 Show relay outputs
- 42 Show VCA metadata
- 42 Show event log
- 42 Show system log
- 43 Allow snapshots
- 43 Allow local recording
- 43 Path for JPEG and video files
- 43 Save event log
- 43 File for event log
- 43 Save system log
- 43 File for system log
- 44 Contrast (0...255)
- 44 Saturation (0...255)
- 44 Brightness (0...255)
- 44 White balance
- 44 R-gain
- 44 G-gain
- 45 B-gain
- 45 IR control
- 45 Default
- 46 Define profiles
- 47 Profile Configuration
- 47 Profile name
- 47 Target bit rate
- 47 Maximum bit rate
- 48 Encoding interval
- 48 Video resolution
- 48 Expert Settings
- 48 GOP structure
- 48 I-frame distance
- 48 I-frame quality
- 48 P-frame quality
- 49 Default
- 50 Select H.264 Settings
- 50 Preview >>
- 50 Note:
- 51 JPEG stream
- 51 Note:
- 52 Camera LED
- 52 Mirror image
- 52 Main frequency and Operation environment
- 52 Exposure/frame rate
- 52 Note:
- 54 Device manager
- 54 Note:
- 54 Recording media
- 54 iSCSI Media
- 55 Local Media
- 55 Note:
- 55 Activating and Configuring Storage Media
- 55 Note:
- 56 Note:
- 56 Formatting Storage Media
- 56 Deactivating Storage Media
- 58 Stream profile settings
- 58 Recording includes
- 58 Standard recording
- 59 Alarm recording
- 59 Alarm triggers
- 61 Weekdays
- 61 Holidays
- 62 Profile names
- 62 Activate recording
- 62 Recording status
- 63 Connect on alarm
- 63 Number of destination IP address
- 63 Destination IP address
- 63 Destination password
- 64 Video transmission
- 64 Stream
- 64 Remote port
- 64 Video output
- 65 Decoder
- 65 SSL encryption
- 65 Auto-connect
- 65 Audio
- 67 Aggregation time [s]
- 68 Analysis type
- 68 Motion detector
- 68 Note:
- 68 Sensitivity
- 69 Minimum object size
- 69 Debounce time 1 s
- 69 Selecting the area
- 69 Tamper detection
- 70 Sensitivity
- 70 Trigger delay [s]
- 70 Global change (slider)
- 70 Global change
- 70 Scene too bright
- 71 Scene too dark
- 71 Scene too noisy
- 71 Reference check
- 71 Disappearing edges
- 72 Appearing edges
- 72 Selecting the area
- 73 Weekdays
- 73 Holidays
- 73 Deleting Holidays
- 75 Trigger
- 75 Trigger active
- 75 Trigger inactive
- 75 Delay [s]
- 76 Audio alarm
- 76 Name
- 76 Signal Ranges
- 76 Threshold
- 76 Sensitivity
- 77 Send alarm e-mail
- 77 Mail server IP address
- 77 SMTP user name
- 77 SMTP password
- 77 Format
- 77 Attach JPEG from camera
- 78 Destination address
- 78 Sender name
- 78 Test e-mail
- 80 Name
- 80 Idle state
- 80 Operating mode
- 81 Relay follows
- 81 Relay name
- 81 Trigger relay
- 82 Automatic IP assignment
- 82 IP address
- 82 Subnet mask
- 83 Gateway address
- 83 DNS server address
- 83 Details >>
- 83 Video transmission
- 83 HTTP browser port
- 83 HTTPS browser port
- 84 RCP+ port 1756
- 84 Telnet support
- 84 Interface mode ETH
- 84 Network MSS [Byte]
- 84 iSCSI MSS [Byte]
- 84 Enable DynDNS
- 84 Note:
- 85 Host name
- 85 User name
- 85 Password
- 85 Force registration now
- 85 Status
- 86 SNMP
- 86 1. SNMP host address / 2. SNMP host address
- 86 SNMP traps
- 86 Authentication (802.1x)
- 87 RTSP port
- 87 UPnP
- 87 Note:
- 87 TCP metadata input
- 88 Enable
- 88 Multicast Address
- 88 Port
- 88 Streaming
- 88 Multicast packet TTL
- 89 File name
- 89 Posting interval
- 89 FTP server IP address
- 89 FTP server login
- 89 FTP server password
- 89 Path on FTP server
- 89 Max. bit rate
- 90 Firmware
- 91 Configuration
- 91 SSL certificate
- 92 Maintenance log
- 92 Note:
- 94 Display Stamping
- 99 Slide control
- 99 Bookmarks