advertisement
Operation
Unloading the dishwasher
Dishes tend to break and chip more easily when they are hot.
Allow the dishes to cool until they are comfortable enough to handle before unloading them.
If you open the door fully after switching off, the dishes will cool much faster.
^ First unload the lower basket, then the upper basket and cutlery tray
(depending on model).
This will prevent water drops from the upper basket and cutlery tray from falling onto the dishes in the lower basket.
Interrupting a programme
A programme is interrupted as soon as the door is opened.
When the door is closed again, the programme will continue from the point it was at before the door was opened.
,
Water in the dishwasher may be hot. Danger of scalding.
Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. 20 seconds. This will enable the temperature in the wash cabinet to settle. Then close the door firmly making sure that it clicks into place.
Changing a programme
If the detergent dispenser flap has already opened, do not change the programme.
If a programme has already started and you wish to change it, proceed as follows:
^ Press the Start/Stop button for at least one second.
The programme will be cancelled.
^ Select the programme you want, and then start it.
35
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Guide to the appliance
- 5 Appliance overview
- 6 Control panel
- 7 Warning and Safety instructions
- 12 Caring for the environment
- 12 Disposal of the packing material
- 12 Disposal of your old appliance
- 13 Energy saving washing
- 14 Before using for the first time
- 14 To open the door
- 14 To close the door
- 14 Safety lock
- 15 Water softener
- 16 To programme the water hardness level
- 17 To call up the water hardness level in the display
- 18 Before using the appliance for the first time you require
- 18 Filling the salt reservoir
- 19 Salt indicator
- 20 Rinse aid
- 20 Adding rinse aid
- 21 Rinse aid indicator
- 22 Setting the rinse aid dosage
- 23 Loading the dishwasher
- 24 Items not suitable for dishwashers
- 25 Upper basket
- 25 Hinged cup rack
- 26 Adjusting the upper basket
- 27 Lower basket
- 27 Hinged spikes
- 29 Bottle holder (depending on model)
- 30 Cutlery
- 30 Cutlery tray (depending on model)
- 31 Operation
- 31 Detergent
- 32 Adding detergent
- 33 Switching on
- 33 Selecting a programme
- 33 Starting a programme
- 34 Time display
- 34 Programme sequence indicators
- 34 At the end of a programme
- 34 Switching off
- 35 Unloading the dishwasher
- 35 Interrupting a programme
- 35 Changing a programme
- 36 Additional functions
- 36 Extra options
- 36 Turbo
- 36 Combi tabs
- 37 Delay start
- 39 Factory default setting
- 40 Adjust Sensor wash
- 41 Cleaning and care
- 41 Cleaning the wash cabinet
- 41 Cleaning the door and the door seal
- 41 Cleaning the door front
- 42 Cleaning the filters in the wash cabinet
- 44 Cleaning the spray arms
- 45 Problem solving guide
- 45 Technical problems
- 47 The dishwasher does not fill/drain
- 48 General problems
- 49 Noises
- 50 Unsatisfactory washing result
- 53 Maintenance
- 53 Cleaning the water inlet filter
- 54 Cleaning the drain pump and non-return valve
- 55 After sales service
- 55 Repairs
- 55 Future updates
- 55 For testing institutes
- 56 Programme chart
- 60 Optional accessories
- 61 Electrical connection
- 62 Plumbing
- 62 The Miele waterproof anti-leak system
- 62 Connection to the water supply
- 63 Drainage
- 64 Technical data