advertisement
Additional functions
Adjust Sensor wash
You can adjust the Sensor wash programme so that it will remove stubborn soiling in a lightly soiled load.
^ Switch the dishwasher off with the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the dishwasher on using the On/Off button K.
Keep the Start/Stop button pressed in until the "Start/Stop" indicator light comes on.
If this does not happen, start the procedure from the beginning again.
^ Press the Delay start button five times.
The "Delay start" indicator will flash briefly five times at intervals.
The message flashing in the Time display shows whether the "Adjust
Sensor wash" function is activated or deactivated.
– " p 1": The "Adjust Sensor wash" function is activated.
– " p 0": The "Adjust Sensor wash" function is deactivated.
^ To change the setting, press the
Start/Stop button.
Switch the dishwasher off with the
On/Off button
K.
40
advertisement
Related manuals
advertisement
Table of contents
- 5 Guide to the appliance
- 5 Appliance overview
- 6 Control panel
- 7 Warning and Safety instructions
- 12 Caring for the environment
- 12 Disposal of the packing material
- 12 Disposal of your old appliance
- 13 Energy saving washing
- 14 Before using for the first time
- 14 To open the door
- 14 To close the door
- 14 Safety lock
- 15 Water softener
- 16 To programme the water hardness level
- 17 To call up the water hardness level in the display
- 18 Before using the appliance for the first time you require
- 18 Filling the salt reservoir
- 19 Salt indicator
- 20 Rinse aid
- 20 Adding rinse aid
- 21 Rinse aid indicator
- 22 Setting the rinse aid dosage
- 23 Loading the dishwasher
- 24 Items not suitable for dishwashers
- 25 Upper basket
- 25 Hinged cup rack
- 26 Adjusting the upper basket
- 27 Lower basket
- 27 Hinged spikes
- 29 Bottle holder (depending on model)
- 30 Cutlery
- 30 Cutlery tray (depending on model)
- 31 Operation
- 31 Detergent
- 32 Adding detergent
- 33 Switching on
- 33 Selecting a programme
- 33 Starting a programme
- 34 Time display
- 34 Programme sequence indicators
- 34 At the end of a programme
- 34 Switching off
- 35 Unloading the dishwasher
- 35 Interrupting a programme
- 35 Changing a programme
- 36 Additional functions
- 36 Extra options
- 36 Turbo
- 36 Combi tabs
- 37 Delay start
- 39 Factory default setting
- 40 Adjust Sensor wash
- 41 Cleaning and care
- 41 Cleaning the wash cabinet
- 41 Cleaning the door and the door seal
- 41 Cleaning the door front
- 42 Cleaning the filters in the wash cabinet
- 44 Cleaning the spray arms
- 45 Problem solving guide
- 45 Technical problems
- 47 The dishwasher does not fill/drain
- 48 General problems
- 49 Noises
- 50 Unsatisfactory washing result
- 53 Maintenance
- 53 Cleaning the water inlet filter
- 54 Cleaning the drain pump and non-return valve
- 55 After sales service
- 55 Repairs
- 55 Future updates
- 55 For testing institutes
- 56 Programme chart
- 60 Optional accessories
- 61 Electrical connection
- 62 Plumbing
- 62 The Miele waterproof anti-leak system
- 62 Connection to the water supply
- 63 Drainage
- 64 Technical data