Application examples. Axing EOC 2-00, EOC 2-01
Add to my manuals
24 Pages
Axing EOC 2-00 is a versatile Ethernet over Coax modem that enables you to transmit IP data signals from the internet, such as from a router, through your existing coaxial antenna distribution system. It operates in the frequency range of 2 to 68 MHz, utilizing the low-attenuation return channel. Multiple EOC 2-00 modems can communicate with each other in a Peer-to-Peer mode, allowing for flexible data transmission within your network.
advertisement
1.5. Application examples
All components in the distribution structure must support the return channel frequency range 2-68 MHz. This also applies to SAT multiswitches, the passive distribution components and for antenna sockets.
1.5.1. Feeding in of IP data in a SAT-IF distribution structure:
If the terrestrial input of the SAT multiswitch is not assigned, it must be terminated with a
75 Ohm terminating resistor.
Example 1: The feeding of the IP signal is performed via the return channel capable antenna socket.
Example 2: The feeding of the IP signal is performed via the return channel capable terrestrial input of the
multiswitch. A combiner TZU 40-03 is used. It prevents that the IP signals are transferred via the return channel into the receive antenna system.
2015-01-19 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten 7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Product description
- 4 Disposal of wastes
- 4 Scope of delivery
- 5 Field of application
- 6 Connections, indications, operating elements
- 7 Application examples
- 7 Feeding in of IP data in a SAT-IF distribution structure
- 8 Feeding in of IP data in a CATV distribution structure
- 8 Feed in of IP data in a headend system
- 9 Installation and commissioning
- 10 Basic functions
- 10 Standby mode
- 10 EoC Reset button
- 10 EoC Reset Function
- 10 WiFi WPS/Reset button
- 10 WiFi access
- 11 EoC network with encryption
- 11 Pair or group formation
- 12 Settings for the WiFi network
- 12 Accessing the configuration screen
- 12 Login
- 13 Operation Mode
- 14 Wireless Settings
- 14 Wireless Basic Settings
- 14 Wireless Security Setup
- 15 Wireless Site Survey
- 15 Wireless Advanced Settings
- 16 Wireless Schedule
- 16 TCP/IP Settings
- 16 LAN Interface Setup
- 17 Management
- 17 Access Point Status
- 17 Statistics
- 18 Time Zone Setting
- 18 System Log
- 19 Upgrade Firmware
- 19 Save / Reload Settings
- 20 Password Setup
- 21 Troubleshooting
- 22 Technical data
- 22 Data sheet
- 23 Drilling template