Scanning Items Larger than the Platen (Image Stitch). Canon CanoScan LiDE120, CanoScan LiDE 120, CanoScan LiDE220, CanoScan LiDE 220, LIDE120

Scanning Items Larger than the Platen (Image Stitch)

You can scan the left and right halves of an item larger than the platen and combine them back into one image. Items up to approximately twice as large as the platen are supported.

Note

• The following explains how to scan from the item to be placed on the left side.

1.

Start IJ Scan Utility.

2. Click Settings..., then set the item type, resolution, etc. in the

Settings (Scan and Stitch)

dialog

as required.

When setting is completed, click OK.

3. Click Stitch.

The Image Stitch window appears.

4. In Select Output Size, select an output size according to the paper size.

5. Make sure that Scan from Left is selected in Scan Direction.

46

6. Place the item that is to be displayed on the left side of the screen face-down on the platen.

7. Click Start Scanning Image 1.

The first item is scanned and appears in 1.

Note

• Click Cancel to cancel the scan.

8. Place the item that is to be displayed on the right side of the screen face-down on the platen.

47

9. Click Start Scanning Image 2.

The second item is scanned and appears in 2.

Note

• Click Cancel to cancel the scan.

10. Adjust the scanned images as required.

Use the Toolbar to rotate or zoom in/out, or drag the images to adjust their positions.

Note

• Select the Adjust cropping frames checkbox to specify the area to be saved.

48

Adjusting Cropping Frames in the Image Stitch Window

• To scan an item again, select the image in the Preview area or the thumbnail at the top of the screen, then click again.

(Delete). The selected image is deleted, allowing you to scan the item

11. Click Save.

The combined image is saved.

Note

• Refer to "

Image Stitch Window

" for details on the Image Stitch window.

• You can make advanced scan settings in the

Settings (Scan and Stitch) dialog displayed by clicking

Settings....

49