advertisement
Chapter 7
Maintenance
This chapter describes the daily maintenance of the server and precautions when relocating or storing the server.
MAKING BACKUP COPIES
NEC recommends you make backup copies of your valuable data stored in hard disk drives of the server on a regular basis. For backup storage devices suitable for the server and backup tools, consult with your service representative.
When you have changed the hardware configuration or BIOS configuration, select "System
Information Management" and then "Save" of the Off-line Maintenance Utility to make a backup copy of the system information.
Also make a backup copy of the RAID System configuration data if your system is in the RAID
System configuration. When your hard disk drives have been auto-rebuilt due to a failure, it is recommended to make a backup copy of the configuration data. To make a backup copy of the configuration data, use the configuration utility that is resident in the FLASH memory on the optional RAID Controller. Refer to the manual supplied with the board.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 About Express Setup
- 3 Microsoft Windows Server 2003
- 3 Notes on Windows Installation
- 9 FLOW OF SETUP
- 10 INSTALLING THE WINDOWS SERVER 2003
- 19 INSTALLING AND SETTING DEVICE DRIVERS
- 19 PROSet
- 21 Network Driver
- 23 Optional Network Board Driver
- 24 Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)
- 25 Graphics Accelerator Driver
- 26 SCSI Controller Driver (N8103-75/95/107)
- 26 Installing SAS Controller Driver (N8103-104)
- 27 Available switch options for Windows Server 2003 Boot.ini file
- 28 SETTING FOR SOLVING PROBLEMS
- 28 Memory Dump (Debug Information)
- 31 Windows Dr. Watson
- 32 Network Monitor
- 33 INSTALLING MAINTENANCE UTILITIES
- 33 UPDATING THE SYSTEM ? INSTALLING SERVICE PACK ?
- 34 MAKING BACKUP COPIES OF SYSTEM INFORMATION
- 35 Installing with the OEM-FD for Mass Storage Device
- 38 NEC EXPRESSBUILDER
- 42 Autorun Menu
- 43 PARAMETER FILE CREATOR
- 44 Parameter File
- 54 NEC ESMPRO
- 54 Functions and Features
- 55 NEC DianaScope
- 56 Universal RAID Utility
- 56 Setup with Express Setup
- 57 Manual Setup
- 58 Using Universal RAID Utility via Network
- 58 Easy Configuration
- 58 Creating Logical Drive of RAID 6
- 59 MAKING BACKUP COPIES
- 60 CLEANING
- 61 Cleaning the Server
- 62 Cleaning the Interior
- 63 Cleaning the Keyboard/Mouse
- 64 Cleaning Disc
- 65 SYSTEM DIAGNOSTICS
- 65 Test Items
- 66 Startup and Exit of System Diagnostics
- 69 RELOCATING/STORING THE SERVER
- 72 SYSTEM VIEWERS
- 73 LEDS
- 74 ERROR MESSAGES
- 74 Error Messages after Power-on
- 75 POST Error Messages
- 79 Beep Codes
- 80 Error Messages on Virtual LCD
- 83 SOLVING PROBLEMS
- 83 Problems with the Server
- 90 Problems with RAID System and RAID Controller
- 92 Problems with Windows
- 97 Problems with NEC EXPRESSBUILDER
- 98 Problems with Express Setup
- 99 Problems with Windows Autorun Menu
- 100 COLLECTING DR. WATSON DIAGNOSTIC INFORMATION
- 100 MEMORY DUMP
- 100 Preparing for Memory Dumping
- 101 Saving the Dump File
- 101 RECOVERY FOR WINDOWS SERVER 2003 X64 EDITIONS AND WINDOWS SERVER 2003
- 102 Maintenance Tools
- 102 Starting Maintenance Tools
- 104 Function of Maintenance Tools
- 106 Maintenance Tools with Remote Console
- 108 RESETTING THE SERVER
- 108 FORCED SHUTDOWN
- 110 SAFETY NOTES
- 111 ANTI-STATIC MEASURES
- 112 PREPARING FOR INSTALLATION AND REMOVAL
- 114 HARD DISK DRIVE
- 114 3.5-inch Disk Model
- 116 2.5-inch Disk Model
- 117 Installation
- 122 Removal
- 126 POWER SUPPLY UNIT (REDUNDANT POWER SUPPLY MODEL)
- 126 Installation
- 129 Replacing a Failing Power Supply Unit
- 130 DRIVE COVER
- 130 Removal
- 130 Installation
- 131 LOGIC COVER
- 131 Removal
- 132 Installation
- 133 DIMM
- 134 Installation Order
- 135 Installation
- 137 Removal
- 138 Using the Memory RAS Features
- 144 PROCESSOR (CPU)
- 145 Installation
- 151 Removal
- 152 PCI BOARD
- 153 Notes
- 154 Installation
- 157 Removal
- 158 USE OF INTERNAL HARD DISK DRIVES IN THE RAID SYSTEM
- 159 3.5-inch Disk Model
- 161 2.5-inch Disk Model
- 163 Disk Expansion Unit
- 167 Transfer Rate of the On-board LAN Controller
- 167 Server Management Software
- 167 Floppy Disk
- 170 CD/DVD Discs
- 170 Tape Media
- 171 Keyboard
- 172 Mouse
- 175 NOTICE
- 175 Optional Board Supported by NEC EXPRESSBUILDER
- 176 Service Pack Which EXPRESSBUILDER Supports
- 176 Installing Service Pack
- 176 Updating System
- 176 Re-installing to the Hard Disk Drive which has been upgraded to Dynamic Disk
- 176 Mounting MO Device
- 176 About Removable Media
- 176 Floppy Disk Drive
- 177 About the System Partition Size
- 178 INSTALLING WINDOWS SERVER 2003 X64 EDITIONS
- 179 Creating "Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER"
- 181 Windows Server 2003 x64 Editions Clean Installation
- 184 Updating the System - Applying Service Pack -
- 190 DRIVER INSTALLATION AND ADVANCED SETTINGS
- 190 PROSet
- 192 Network Driver
- 194 Optional Network Board Driver
- 195 Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)
- 196 Graphics Accelerator Driver
- 197 Installing SCSI Controller Driver (N8103-75/107)
- 197 SCSI Controller Driver (N8103-95)
- 197 Installing SAS Controller Driver (N8103-104)
- 198 About Windows Activation
- 200 SETTING FOR COLLECTING MEMORY DUMP (DEBUG INFORMATION)
- 201 BEFORE INSTALLING WINDOWS SERVER 2003
- 201 Optional Board Supported by NEC EXPRESSBUILDER
- 202 Service Pack Which EXPRESSBUILDER Supports
- 202 Application of Service Pack
- 202 Updating System
- 202 Re-installing to the Hard Disk which has been upgraded to Dynamic Disk
- 202 Mounting MO Device
- 203 About Removable Media
- 203 Floppy Disk Drive
- 203 About the Upgrade to Windows Server 2003 R2
- 204 About the System Partition Size
- 206 INSTALLING WINDOWS SERVER 2003
- 207 Creating "Windows Server 2003 OEM-Disk for EXPRESSBUILDER"
- 209 Windows Server 2003 Clean Installation
- 211 Procedure for License Authentication
- 212 Updating the System - Applying Service Pack -
- 218 DRIVER INSTALLATION AND ADVANCED SETTINGS
- 218 PROSet
- 219 Network Driver
- 220 Graphics Accelerator Driver
- 221 SCSI Controller Driver (N8103-75/95/107)
- 221 Installing SAS Controller Driver (N8103-104)
- 222 About Windows Activation
- 224 Available Switch Options for Windows Server 2003 Boot.ini File
- 225 SETTING FOR COLLECTING MEMORY DUMP (DEBUG INFORMATION)
- 229 Hardware
- 231 Software