- Home
- Domestic appliances
- Small kitchen appliances
- Vacuum sealers
- PolyScience
- VSCH-300AC
- User's manual
advertisement
CONTROLLER OVERVIEW
Power LED — This LED lights when the Vacuum Sealer is plugged into the electrical outlet . It indicates that the unit is ready for use .
Auto Button Pulse Button
Power LED
Seal Button Seal Plus
Button
Stop Button
Auto — Activates a vacuum cycle followed by a seal cycle .
The LED above this button is lit while this process is running .
Vacuum is released when the process is complete .
Pulse — Manually controls the vacuum process . Press and hold the button to apply vacuum, release the button to pause the process . The LED above this button lights when this function is selected .
Seal — Immediately activates the sealing process when the unit is operating or in Pulse . The LED above this button lights when the unit is sealing . The normal sealing time is approximately 5 seconds .
7 PolyScience Vacuum Sealing Systems
advertisement
Related manuals
advertisement
Table of contents
- 4 Important Safeguards
- 6 Introduction
- 7 Controls & Components
- 8 Controller Overview
- 9 Set-Up
- 9 Electrical Power
- 10 Making a Heat-Seal Bag from a Roll
- 11 Opening & Closing Vacuum Comparment Lid
- 11 Day-to-Day Operation
- 11 Turning the Unit On
- 12 Automatic Vacuuming & Sealing
- 13 Manual Vacuuming & Sealing
- 13 Extending the Seal Time
- 13 Canceling the Vacuum or Sealing Process
- 14 Vacuum Sealing Canisters & Bottles
- 15 Cleaning & Storage
- 16 Troubleshooting
- 17 Technical Specifications
- 18 Replacement Bags & Rolls
- 18 Disposal
- 19 Warranty