Accepting a call. Siemens OpenStage 60 SIP, OpenStage 60 G, OpenStage 80 G SIP, OpenStage Key Module, OpenStage 80 SIP

Step by Step

Making calls with multiple lines

Accepting a call

Incoming calls for the executives should be forwarded immediately to the assigned secretary and answered there. The line overview ( page 142) shows whether the executive has activated call forwarding.

Accepting calls at the secretary phone

An incoming call for "Executive 1" rings at the assigned

"Sekretary 1".

The line key of the "Sekretary 1" phone flashes.

The "Sekretary 1" direct station selection key on the "Executive 1" phone also flashes.

T

Press the line key to answer the call. The station answers. The line key flashes rapidly

.

The "Sekretary 1" direct station selection key on the "Executive 1" phone illuminates.

Early call pickup by Executive 1

An incoming call for "Executive 1" rings on "Sekretary 1".

The "Sekretary 1" direct station selection key on the

"Executive 1" phone flashes. The "Sekretary 1" has not yet answered the call. Before the call is forwarded to

"Sekretary 2", "Executive 1" picks up the call early.

T

Press the "Sekretary 1" direct station selection key on the "Executive 1" key to answer the call.

If for example a call for "Executive 2" on

"Sekretary 2" is not answered, "Sekretary 1" or

"Executive 1" can pick up the call early

139