Door sensors. Alphatech IP Bold series, IP Bold - tx, IP Bold - tkxc, IP Bold - txc

3.4.3 Door sensors

Door sensors are special functions of door entry IP BOLD which is optional. It is HW option which is different according button number of each model – inputs for door sensors. There is created information in the system about close/open the door.

After perfo rming of changes please don’t forget click on „Save“.

Input door sensor 1 / 2 Door sensor or disable – by permission is activated transmission of Info about open / close the door. This Info is display ether on this page – Now is – or on home page with video(under video frame will be display frames with this

Info. Further is transmitted to programms UDVguard and UDV panel and as last is possible use it in SNMP.

IP BOLD - installation and operating instructions 51

Input door sensor 1 / 2 Exit button – relay 1-4 – because the use of door sensors not found so wide usage, so these can be used as two inputs to the function Exit button. When the input connections (short) so activates the corresponding relay (switch monostabil) .

52 IP BOLD - installation and operating instructions