Connecting the Speakers. JVC LVT1220-002A

UX-QD7[UB].book 13 ページ ２００４年９月３日　金曜日　午後２時４３分

(Continued)

Connections

Introduction

Connect all necessary parts before connecting the power plug.

Connecting the Speakers

After connecting the speakers, gently pull on the speaker cords to make sure the cords are firmly connected and do not pull out.

Main unit (rear view)

Speaker cord

Speaker cord

Red

Black

Red

Black

Speaker cord

13

Right speaker (rear view)

CAUTION

• Do not short-circuit the and speaker terminals. Doing so may damage the speakers.

• Do not connect other speakers together with the supplied speakers. The change in impedance may damage the main unit and the speakers.

• The speakers of this product are magnetically shielded, but color irregularities may occur on the

TV depending on how the speakers are installed.

Keep in mind the following.

1. Turn off the main power of your TV before installing the speakers. Wait for about 30 minutes before turning on the TV again.

2. If color irregularity occurs in pictures, keep a distance of more than 10 cm between the TV and the speakers.

Left speaker (rear view)

You can detach the speaker cover.

Speaker cover

NOTE

• Improper speaker cord connection spoils the stereo effect and sound quality.

• The impedance of speakers connected to this product must be within the range of 4 Ω to 16 Ω .

• Cooling fan is built into the main unit for emitting generated heat. The internal cooling fan automatically rotates and stops. To ensure sufficient cooling, leave a space of more than 1 cm between the main unit and the speakers or other objects.