advertisement
3. Installation
CAUTION
Please note the safety information in [Important Notices].
3.1 Installing the Console Drawer (procedure for tapped guide rails)
CAUTION
Console Drawer (See [Technical Specifications] for more information).
Avoid dust, humidity and extreme temperatures. Installation may require two or more people in some situations. Be careful not to pinch your fingers or hands between the guide rails and the Console Drawer.
3.2 Installation Procedure
1. Insert the rear spacer studs of the guide rails into the holes in the rear rack pillars.
Extend the guide rails to reach the inside of the front rack pillar. Fasten each guide rail with four screws, one into each of the top and bottom holes of both the front and rear spacers.
(Install the left and right guide rails at the same height.)
2. Extend the guide rails to reach the inside of the front rack pillar.
Fasten each guide rail in place with two screws, one into each of the top and bottom
holes of the front spacer. (Attach the guide rails inside the front/rear rack pillar so
that the guides face inwards.)
3. Install the left and right guide rails at the same height.
Attach the guide rails so that they face inward and are open forward, ready to accept the Console Drawer.
Attach the guide rails inside the front/rear rack pillar.
See the "Installing the Guide Rails" diagram.
8
Screws
Rear Spacer
Guide Rail
Front Spacer
Rear Spacer
Studs
Guide
Rear Spacer
Guide Rail
Front Spacer
Rear Rack Pillar
Installing The Guide Rails
Screws
Front
Spacer
Front Rack Pillar
9
4. Slide the Console Drawer into the front end of the guide rails.
Be careful that the latch lever dose not come loose.If the latch lever comes loose the Console Drawer may slip.If the Console Drawer dose not slide easily into the guide rail or is too heavy, get one or more other people to help you lift and insert it.
5. Push the Console Drawer in until it stops, then fasten with two screws, one on each side of the front of the Console Drawer.
Guide Rail
Guides
Guide Rail
Console Drawer
Latch Lever
Installing the Console Drawer
Screws
1 0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 1.PREFACE
- 5 Conventions
- 5 Packing List
- 7 2.IMPORTANT NOTICES
- 7 Safety Information
- 8 Moving Console Drawer
- 8 Disposal
- 9 Safety Precautions and Limited Warranty Information
- 10 3. INSTALLATION
- 10 3.1 Installing the Console Drawer (procedure for tapped guide rails)
- 10 3.2 Installation Procedure
- 13 4.NAMES AND FUNCTIONS OF PARTS
- 13 Overview
- 14 Rear Panel
- 15 DIP Switch Settings
- 16 5.CONNECTING AND REMOVING CABLES
- 16 Connecting Cables
- 18 Removing Cables
- 19 6.OPERATION
- 19 6.1 Operating the Console Drawer
- 22 6.2 Monitor Adjustment
- 23 6.3 Basic Adjustment Procedure
- 24 6.4 Main Menu Items
- 25 6.5 Resolutions and Refresh Rates
- 25 6.6 Caution: LCD display
- 26 6.7 Keyboard Operation, LED Indicators and the Reset SW
- 27 6.8 Pointing Device Operation
- 27 6.9 Hot-key and Reset Buttons
- 28 6.10 Switching Servers
- 28 6.11 Selecting a Server when the Power is ON
- 28 6.12 Selecting the Hot Key Mode
- 34 6.13 Setting/Changing Server Names
- 35 6.14 Constant Server Name Display Function
- 36 6.15 EDID Setting Mode
- 37 6.16 Storing Console Drawer
- 39 7. CLEANING THE CONSOLE DRAWER