16-port KVM Switch Integrated Console Drawer

8-Port KVM Switch

(1) (2) (3) (4) (5) (6)

8-port KVM Switch Rear Panel

(1) Power cable connector

Connect power cable to power socket.

(2) Connectors for servers

[1 through 8]

Connect each port (1 through 8) on this device to the relevant host’s keyboard, mouse and monitor connectors with the special cable.

(3) DIP switches

Use for a variety of settings. Numbered from left side while facing the switches starting from 1, 2…8; up is on and down is off.

(4) Keyboard connector

Connect a PS/2 keyboard connector (purple).

(5) Mouse connector

Connect a PS/2 mouse connector (green).

(6) Monitor connector

Connect a monitor.

16-Port KVM Switch

16-port KVM Switch Rear Panel

1 2