Station Sitter Manual

Chapter 5: Communication Programming

CALL PROGRESS

The STATIONSitter monitors call progress when it dials out for an alarm. If STATIONSitter encounters a busy signal or receives no answer after eight rings, the unit hangs up, waits the programmed intercall time and then dials the next phone number. When dialing some beeper/pager services, the line may be answered before receiving a ringback. This may interfere with the call progress detection and result in a failed call to certain phone systems or beeper/pager services. If this occurs, disable call progress detection.

To disable call progress detection:

1. Press the SENSOR ON/OFF key.

2. Press the STATUS/CONFIG key.

STATIONSitter will respond “Off ” to indicate that call progress has been turned off.

3. Repeat key sequence to change.

79