Specifications . Sharp PN60TW3, PN-60TW3, PN70TW3, PN-70TW3

Specifications

E

64 n

Product Specifications

Model

LCD component

Max. resolution

Max. colors

Pixel pitch

Max. brightness (typical)

Contrast ratio (typical)

Viewing angle

Screen active area

Computer input signal

Sync signal

Video color system

Plug and play

Power management

Input terminals PC/AV

PC

PN-70TW3

70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD

(pixels) 1920 x 1080

Approx. 1.06 billion colors

0.802 mm (H) × 0.802 mm (V)

300 cd/m

2

3,000 : 1

*

1

PN-60TW3

60" Class [60-1/16 inch (152.5cm) diagonal] TFT LCD

0.692 mm (H) × 0.692 mm (V)

160° right/left/up/down (contrast ratio ≥ 10)

52-5/16 (W) x 29-7/16 (H)

(1329.1 x 747.6)

Analog RGB (0.7 Vp-p) [75 Ω], DisplayPort 1.1a

Horizontal/vertical separate (TTL: positive/negative), Sync-on-green

*2

,

Composite sync (TTL: positive/negative)

*2

NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM

VESA DDC2B

VESA DPMS

HDMI x 3

Mini D-sub 15 pin, 3 rows x 2

DisplayPort x 1

Output terminals

Wireless controller

Audio

Serial (RS-232C)

Video/Audio

Audio

LAN terminal

Speaker output (internal/external)

Touch Panel

Touch pen

Detection method

PC connector

Touch pen adapter port

3.5 mm mini stereo jack x 2

3.5 mm mini jack x 1

DisplayPort x 1

3.5 mm mini stereo jack x 1

10 BASE-T/100 BASE-TX

10 W + 10 W/10 W + 10 W 6 Ω

Infrared blocking detection method

USB (2.0 compliant) (Type B) x 2

Wireless communication method

(2.4 GHz, IEEE 802.15.4 compliant, DS-SS method)

USB (2.0 compliant) (Type A)

Wireless communication method

(2.4 GHz, IEEE802.11b/g/n)

(5 GHz, IEEE802.11a/n)

Power requirement

LAN terminal

USB port

Wireless adapter port

10 BASE-T/100 BASE-TX

USB (2.0 compliant) (Type A)

USB (2.0 compliant) (Type A)

AC 100 V - 240 V, 2.7 A, 50/60 Hz AC 100 V - 240 V, 2.3 A, 50/60 Hz

Operating temperature *

Operating humidity*

4

3

*

4

41°F to 95°F (5°C to 35°C)

20% to 80% (no condensation)

Power consumption

(Maximum / input signal waiting mode * standby mode * 6 )

Dimensions (excluding protrusions)

5

/

Weight

235 W / 25.0 W / 3.5 W inch (mm) Approx. 64-13/16 (W) x 3-11/16 (D) x 39-3/4 (H) (1647 x 94 x 1010) lbs. (kg) Approx. 134.5 (61)

190 W / 25.0 W / 3.5 W

Approx. 56-9/16 (W) x 3-11/16 (D) x 35-1/16 (H) (1437 x 94 x 890)

Approx. 105.9 (48)

*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the equipment, it is not possible to precisely maintain a constant level of brightness.

*2 D-sub input terminal only.

*3 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.

In such cases, please check the temperature condition specified by the optional equipments.

*4 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.

*5 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF.

*6 When POWER SAVE MODE is set to OFF. When POWER SAVE MODE is set to ON: 0

.

5 W

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

Specifications

n

Dimensional Drawings

Note that the values shown are approximate values.

[PN-70TW3]

3-11/16

[94] 1-15/16

[49]

64-13/16 [1647]

Opening width (62-3/16 [1580])

1-15/16

[49]

VESA holes *

7-7/8

[200]

7-7/8

[200]

Unit: inch [mm]

3-1/4 [82]

[PN-60TW3]

3-11/16

[94]

1-15/16

[49]

31-11/16 [805]

56-9/16 [1437]

Opening width (53-15/16 [1370])

1-15/16

[49]

VESA holes *

7-7/8

[200]

7-7/8

[200]

Unit: inch [mm]

3-1/4 [82]

31-11/16 [805]

When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.

SHARP recommends using M6 screws and tighten the screws.

Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch

(8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.

65

E

Specifications

n

Power management

This monitor conforms to VESA DPMS. Both your video card and computer must support the same standard in order for the monitor’s power management function to work.

DPMS: Display Power Management Signaling

DPMS Screen

ON STATE Display

Power consumption *1

235 W

190 W

Hsync Vsync

Yes Yes

STANDBY

SUSPEND

OFF STATE

No display

25

.

0 W *2

25

.

0 W *2

No

Yes

No

Yes

No

No

*1 Upper value: PN-70TW3, Lower value: PN-60TW3.

*2 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF.

n

DDC (plug and play)

The monitor supports the VESA DDC (Display Data Channel) standard.

DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors.

There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.

n

Compatible signal timing (PC)

Screen resolution Hsync Vsync Dot frequency

VESA

Wide

US TEXT

Sun

640 × 480

800 × 600

848 × 480

1024 × 768

1152 × 864

1280 × 768

1280 × 800

1280 × 960

1280 × 1024

1360 × 768

1400 × 1050

1440 × 900

1600 × 1200*

1680 × 1050

1920 × 1200*

1280 × 720

1920 × 1080

720 × 400

1024 × 768

1152 × 900

1280 × 1024

1600 × 1000

31.5kHz

37.9kHz

37.5kHz

35.1kHz

37.9kHz

48.1kHz

46.9kHz

31.0kHz

48.4kHz

56.5kHz

60.0kHz

67.5kHz

47.8kHz

60.3kHz

49.7kHz

60.0kHz

64.0kHz

80.0kHz

47.7kHz

65.3kHz

55.9kHz

75.0kHz

65.3kHz

74.0kHz

44.7kHz

67.5kHz

31.5kHz

48.3kHz

53.6kHz

56.6kHz

61.8kHz

71.8kHz

71.7kHz

81.1kHz

68.6kHz

60Hz

72Hz

75Hz

56Hz

60Hz

72Hz

75Hz

60Hz

60Hz

70Hz

75Hz

75Hz

60Hz

75Hz

60Hz

60Hz

60Hz

75Hz

60Hz

60Hz

60Hz

60Hz

60Hz

60Hz

60Hz

60Hz

70Hz

60Hz

66Hz

70Hz

66Hz

76.2Hz

67.2Hz

76Hz

66Hz

25.175MHz

31.5MHz

31.5MHz

36.0MHz

40.0MHz

50.0MHz

49.5MHz

33.75MHz

65.0MHz

75.0MHz

78.75MHz

108.0MHz

79.5MHz

102.25MHz

83.5MHz

108.0MHz

108.0MHz

135.0MHz

85.5MHz

121.75MHz

106.5MHz

162.0MHz

146.25MHz

154.0MHz

74.4MHz

148.5MHz

28.3MHz

64.13MHz

70.4MHz

74.25MHz

94.88MHz

108.23MHz

117.01MHz

134.99MHz

135.76MHz

* Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

-

-

-

-

-

-

-

-

Digital

DisplayPort

Yes

Yes

Yes

-

Yes

Yes

Yes

-

Yes

Yes

Yes

Yes

-

-

-

-

Yes

Yes

Yes

Yes

-

-

-

-

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

-

Yes

Yes

Yes

Yes

-

-

HDMI

Yes

Yes

Yes

-

Yes

Yes

Yes

Analog

(D-SUB)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

E

66

• Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.

• The frequency values for the Sun are reference values.

Specifications

n

Compatible signal timing (AV)

Screen resolution

1920 × 1080p

1920 × 1080i

1280 × 720p

720 × 576p

720 × 480p

640 × 480p(VGA)

720(1440) × 576i

720(1440) × 480i

Frequency

24Hz

50Hz

59.94Hz

60Hz

50Hz

59.94Hz

60Hz

50Hz

59.94Hz

60Hz

50Hz

59.94Hz

60Hz

59.94Hz

60Hz

50Hz

59.94Hz

60Hz

HDMI

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Component

-

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

-

-

Yes

Yes

Yes n

Channels that can be used in wireless LAN

REGION SETTING (WIRELESS) Standard Channel

NO SETTING

EUROPE

AUSTRALIA

NEW ZEALAND

SAUDI ARABIA

TURKEY

SINGAPORE

INDIA

UAE

OMAN

QATAR

KUWAIT

TAIWAN

SOUTH AFRICA

RUSSIA

MALAYSIA

PHILIPPINES

HONG KONG

LAOS

THAILAND

IEEE802.11b/g/n

IEEE802.11b/g/n

IEEE802.11a/n

IEEE802.11b/g/n

IEEE802.11a/n

IEEE802.11b/g/n

1-11ch

1-13ch

36/40/44/48ch

1-11ch

36/40/44/48/149/153/157/

161/165ch

1-11ch

• Outdoor use of the 5 GHZ band is prohibited by the Radio Law.

Frequency band

(center frequency)

2412 - 2462MHz

2412 - 2472MHz

5180 - 5240MHz

2412 - 2462MHz

5180 - 5240MHz

5745 - 5825MHz

2412 - 2462MHz

67

E

E

68

Specifications

n

D-sub input terminal pins

(Mini D-sub 15 pin)

No.

Function

1 Red video signal input

2 Green video signal input

3 Blue video signal input

No.

9 +5V

10 GND

11 N.C.

Function

4 N.C.

5 GND

12 DDC data

13 Hsync signal input

6 GND for red video signal 14 Vsync signal input

7 GND for green video signal 15 DDC clock

8 GND for blue video signal n

HDMI input terminal pins

(HDMI

TM

Connector)

No.

Function

1 TMDS data 2+

2 TMDS data 2 shield

3 TMDS data 2-

4 TMDS data 1+

5 TMDS data 1 shield

6 TMDS data 1-

7 TMDS data 0+

8 TMDS data 0 shield

9 TMDS data 0-

10 TMDS clock+

No.

Function

11 TMDS clock shield

12 TMDS clock-

13 CEC

14 N.C.

15 SCL

16 SDA

17 DDC/CEC GND

18 +5V

19 Hot-plug detection n

DisplayPort input terminal pins

(DisplayPort 20 pin)

No.

Function

1 MainLane 3-

2 Gnd

3 MainLane 3+

4 MainLane 2-

5 Gnd

6 MainLane 2+

7 MainLane 1-

8 Gnd

9 MainLane 1+

10 MainLane 0-

No.

11 Gnd

Function

12 MainLane 0+

13 Gnd

14 Gnd

15 Aux +

16 Gnd

17 Aux -

18 Hot-plug detection

19 Gnd

20 3.3V

n

DisplayPort output terminal pins

(DisplayPort 20 pin)

No.

Function

1 MainLane 0+

2 Gnd

3 MainLane 0-

4 MainLane 1+

5 Gnd

6 MainLane 1-

7 MainLane 2+

8 Gnd

9 MainLane 2-

10 MainLane 3+

No.

11 Gnd

Function

12 MainLane 3-

13 Gnd

14 Gnd

15 Aux +

16 Gnd

17 Aux -

18 Hot-plug detection

19 Gnd

20 3.3V