advertisement
Create Your Segment (Task 6)
It is important to give some thought to how you will go about configuring a segment in AMS. If you have not already done so, it may be helpful to review the
Getting Started Guide.
Logging in to Configurator
To get started, open your Configurator module. You can access it via the icon on your desktop or from the Windows Start Menu (Programs>Stanley Security Solutions).
The Wi-Q AMS splash screen appears briefly, then the Login dialog box opens.
Selecting the Database Connection
When you start up AMS, the system defaults to the database installed on the Host computer. If for some reason your database resides on a computer other than the one running AMS, you must select the database before you login.
To select a database on a different computer
1 From the File menu, select Select database connection from the drop-down list.
Figure 37 Select Database Connection
Click on Select
Database
Connection
The Database Connection dialog box opens. See Figure 38.
Figure 38 Database Connection Window
63
64
2 In the Server field, select the server location from the drop-down list.
3 Under Connect Using, select either Windows authentication or SQL Server authentication. If you select SQL Server, enter the login name and password for that server.
4 Click Test Connection.
5 Click Finish. You are ready to login to AMS using your desired database.
Login Information
When you enter the system for the first time, the default, case-sensitive, User
Name and Password are:
Login: Admin
Password: Admin
1 Enter the Login Name and Password.
2 Select Login. You are ready to start setting up your new segment.
When you select Login, the Define a New Segment dialog box opens.
Define a New Segment
1 In the Segment Name box, enter a unique name for your segment.
Figure 39 Define a New Segment
2 Select Finish. The Configurator dialog box opens on the Segment Tab. The new segment name appears in the Selected Segment box and AMS assigns it a unique Segment ID.
Figure 40 Identifying the Segment name and ID
Segment name
Segment ID
Note
Once you have successfully logged in, it is recommended that you change the default
User Name and Password to ensure system security.
65
66
To change the Password
1 At the top left corner of the Configurator dialog box, select File>Change Password. The Set Password of User dialog box opens.
Figure 41 Set Password of User
2 Enter the new password
3 Retype the new password.
4 Select Finish.
WARNING: Be sure to keep a record of your new password in a locked safe that is available to your senior management team!
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 System Overview
- 12 Setup Checklist
- 13 Hardware Overview
- 16 Installing System Hardware
- 24 Install Portal Gateways (Task 8)
- 28 Install Door Hardware (Task 9)
- 33 Prepare Your Computer (Task 3)
- 43 (Task 4)
- 45 Install Software (Task 5)
- 63 Create Your Segment (Task 6)
- 67 (Task 7)
- 84 (Task 10)
- 96 Associations
- 108 Credential Settings
- 116 Daylight Saving Settings
- 120 PIN Settings
- 121 Adding Users to the Segment
- 134 Messaging
- 137 Configuring Timezones
- 145 Configurator
- 166 System Administrator
- 174 AMS Database
- 178 Firmware Updates
- 181 Transactions Monitor
- 191 Statistics Monitor
- 199 Reports
- 211 Status Flags in the FLAGS Column
- 212 Update Flags in the PEND Column
- 214 Glossary
- 220 Lock installation