Elation Lumina Strip User manual
Add to My manuals13 Pages
Elation Lumina Strip is a dynamic lighting fixture that offers a wide range of features and capabilities for creating stunning visual effects. With its 10 Warm White LEDs, it delivers bright and vibrant illumination, making it suitable for various applications. The Lumina Strip excels in both DMX and Chase modes, providing users with flexible control options. In DMX mode, it can operate as a 7, 8, 10, 11, or 16-channel dimmer, allowing for precise control over individual LEDs or groups of LEDs.
advertisement
![Elation Lumina Strip User manual | Manualzz Elation Lumina Strip User manual | Manualzz](http://s1.manualzz.com/store/data/010796196_1-09fa8a1a3794ed3e931df2ce01140720-360x466.png)
Lumina Strip
USER MANUAL
Version 1.1 24-004-3557-00
90040-3402
Lumina Strip
GENERAL INSTRUCTIONS
Thanks for your purchasing Lumina Strip lighting equipment, which is available in Warm White (WW) version.
The Lumina Strip is compatible of both DMX & RDM and with 10 channel LED intensity adjustable. Programs
can be updated via RDM interface. It is available in master and slave control connection. It is easy for users to
install and operate.
For the optimum operation and best performance, please read the instruction in this manual carefully and thoroughly.
WARNINGS
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
After use, the front panel is extreme hot. Please wait at least 15 min. for absolute cool before touching it.
Otherwise, it causes the result of burning.
NEVER try to repair the unit yourself. Repair by unqualified people could cause damage or mis-operation.
This device is not suitable for direct mounting on normally flammable surfaces. To keep a minimum 0.2m safety distance to any flammable materials.
DO NOT make any inflammable liquids, water or metal objects enter the unit.
This unit contains no user serviceable parts inside. This unit contains dangerous voltages, always remove the power plug from the wall socket before any service operation and when not in use for a long time.
Earth connection is so essential.
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for a check or contact us directly.
PHYSICAL DIMENSIONS
1
Lumina Strip
Accessories(Included):
1. The unit power cable (1pcs)
2. Wing screw(2pcs) + Grommet(2pcs) + Washer(2pcs)
3. Mounting Assemble(2pcs)
MAIN FEATURES
07, 08, 10,11, 16 DMX Channels selection
Standard DMX 5-pin In/Out
16 built-in programs except for Auto & Full subject to Speed and Dimmer
0-100% dimming level
Standard DMX-512 protocol
01 Thru 100 Chase Speed adjustment
Power failure memory
LED display window-shows current activity and function state
On/Off switch
Fuse protection
INSTALLATION
Before use, make sure whether four screws are secured firmly, if not, please secure them with the screwdriver, loose 4 screws for lamp replacement.
The unit has also been designed to hold up as user's desire. So you can fix the unit on the holder by the wing screw. They are placed in the accessory bag, included.
The following installation diagrams are for user reference.
Method 1 Method 2
2
Note :
Once this unit is for hanging application, it is required to use a safety rope (sold separately, which can hold at least 10 times the weight of the fixture ) to ensure the mounting safety of the fixture by attached through the holder.
Lumina Strip
Power:
Before plugging your unit in, be sure the resource voltage in your area matches the unit required voltage.
The unit is available in a 230V version only. Because the line voltage may vary from venue to venue, you should be sure to plug the socket into a matching wall outlet before attempting to operate your unit.
Fuses:
The Lumina Strip electric system is protected by T3.15A 250V 5*20mm. Please see the printing on the case and these fuses prevent you from overloading damaging your unit. To replace the protective fuse, use a flat head screwdriver to unscrew the fuse holder. Pull out the old fuse and replace it with a new one. Insert the
fuse back into the slot and tighten. Always replace with exact same type fuse removed unless otherwise specified by an authorized service technician,
SYSTEM CONNECTION
Maximum amount of this units that may be connected is 16pcs(AC100-120V) or 32pcs(220-240V).
One universe DMX can drive up to 32 pcs of Lumina Strip, please add DMX booster if Lumina Strip are connected together in line over 32 pcs or data cable over 100M. The connections may be illuminated
as following.
DMX IN
POWER IN
AC100-240V 15A MAX
Lumina Strip
1
3pin Power Cable
5pin DMX Cable
2
DMX IN
POWER IN
AC100-240V 15A MAX
Lumina Strip
1
3pin Power Cable
5pin DMX Cable
2
DMX IN
POWER IN
AC100-240V 15A MAX
Lumina Strip
1
3pin Power Cable
5pin DMX Cable
2
DMX IN
POWER IN
AC100-240V 15A MAX
Lumina Strip
1
3pin Power Cable
5pin DMX Cable
2
DMX IN
POWER IN
AC100-240V 15A MAX
Lumina Strip
1
3pin Power Cable
5pin DMX Cable
2
POWER OUT POWER IN
DMX OUT DMX IN
POWER OUT POWER IN
DMX OUT DMX IN
POWER OUT
DMX OUT
POWER IN
DMX IN
POWER OUT
DMX OUT
POWER IN
DMX IN
POWER OUT POWER IN
DMX OUT DMX IN
3
3
3
3
3
32
32
32
32
32
3
4
Lumina Strip
Layout Overview
Front Panel Overview
1
1. Lamp: Totally 10 LEDs* Warm White, 7W
Rear Panel Overview
6 1 10 7
9 2 3 4 5 11 8
1. LCD Display
This multi-function display will detail all DMX Address, Chase , Program, Speed activity that pertains to the
current operation mode of the unit.
2. Mode button
This button will call up the unit operation mode between DMX and Chase mode.
3. Menu button
This button will active the different functions in Receive and Chase modes.
Note: In the Chase mode, Menu key is used to only activate Chase Dimmer, Chase Program, Chase Speed,
Fade Time and Lamp Mode. While in the " Receive " mode, only used to only select DMX Address, Channel.
4. UP button
This button will increase the displayed value in the LED display.
5. Down Key
This button will decrease the displayed value in the LED display.
6. DMX Out
This connector sends your DMX signal through to the next unit.
7. DMX In
This connector accepts your DMX input signal.
8. Power Input:
AC100-240V~50/60Hz, Max15A. The supply power is input into your unit via this connector. Be sure to
always connect to proper voltage.
9. Power Thru:
AC100-240V~50/60Hz, Max15A. This connector sends the supply power to the next unit.
10. Fuse:
F3.15A 250V 5*20mm. These fuses prevent you from overloading damaging your unit. Be sure to always
replace with the exact same type fuse.
11. Power Switch:
Turn on/off the power supply.
Lumina Strip
OPERATION MODES
The “ Lumina Strip ” has two different operation modes. It can be used as a 07, 08, 10,11, 16 channel DMX dimmer. Tap “Mode”
button to switch the operation mode between “Receive Mode” and “Chase Mode”. Please follow illustrations below to operate the unit in your desired mode.
Mode Parameter Parameter Value Function
DMX
Program
Address
Channel
No DMX
Glide
Program
Speed
Master
Lamp Mode
Fade Time
001-512
07/08/10/11/16
OFF/Hold/Program
OFF/ON
Full/01--16/AUTO
01-100
00-100
Tungsten/LED
00-100
To set the initial DMX receiving address
To set the DMX Control Mode
To set the status of the fixture when DMX signal is input
To set the output of the DMX Data
To select a built-in program
To set the speed level of the built-in Program
To set the intensity
To set the mode of Lamp
To set the speed of the Fadetime
DMX Mode
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you set your unit dimmer function as a 07, 08, 10,11 or 16 channel DMX dimmer and DMX address.
DMX Channel Functions Details
DMX
Channel
1
2
3
4
5
6
7
8
9
10
11
11 Channel Mode
LED1- - LED2 Dimmer
LED3- - LED4 Dimmer
LED5- - LED6 Dimmer
LED7- - LED8 Dimmer
LED9- - LED10 Dimmer
Program
Speed
Fade Time
LampMode
Play Mode
Master
10 Channel Mode
LED1 Dimmer
LED2 Dimmer
LED3 Dimmer
LED4 Dimmer
LED5 Dimmer
LED6 Dimmer
LED7 Dimmer
LED8 Dimmer
LED9 Dimmer
LED10 Dimmer
8 Channel Mode
LED1- - LED5 Dimmer
LED6- - LED10 Dimmer
Program
Speed
Fade Time
LampMode
Play Mode
Master
7 Channel
LED1- - LED10 Dimmer
Program
Speed
Fade Time
LampMode
Play Mode
Master
DMX Channel
1
2
3
4
7
8
5
6
9
10
11
12
13
14
15
16
16 Channel Mode
LED1 Dimmer
LED2 Dimmer
LED3 Dimmer
LED4 Dimmer
LED5 Dimmer
LED6 Dimmer
LED7 Dimmer
LED8 Dimmer
LED9 Dimmer
LED10 Dimmer
Program
Speed
Fade Time
LampMode
Play Mode
Master
5
6
Lumina Strip
Program Mode:
Use the operation mode only when you are about to use your unit as a channel chaser among of the 07,
08, 10, 11,16 channel chasers. The unit has 16 built-in programs except for Auto and Full. Of course, you can select any of these programs to chase for a more dramatic lighting show, and you can also control the speed at which the set programs will be chased.
1. Setting your desired Chase Program:
Once you have activated the Chase Mode, you can tap the “MENU” button to select and activate “Chase Program” menu. The chase pattern is displayed in the LCD by "Program " followed by two digits 01~16 or only "AUTO"& "FULL" appears. You can tap “UP” and “DOWN” button to select any of them to run at a single time.
Selecting any program of Program01-16 will activate the selected program; while selecting “Auto” will automatically play the built-in 16 chase programs. When select “Full” menu, all the LEDs will keep lighting.
Program
01
MODE MENU UP DOWN
Auto
MODE MENU UP DOWN
2. Chase Speed Menu:
Press “MENU’ button to select and activate “Chase Speed” menu. In this menu, you can adjust the program chase speed.
Speed
001
MODE MENU UP DOWN
Use the "UP " and "DOWN" buttons to adjust the chase speed from 001 thru 100. A set value of 100 will give you the fastest chase speed(approx.1/10th of a second) . While a set value of
001 will give you the slowest chase speed (once every 30 second.).
3. Master (Intensity) Menu:
To adjust the output intensity, you must activate the
Chase Dimmer Menu as the previous step. Press “MENU” button and select “Chase Dimmer” menu, the LCD will display
“Dimmer” followed by three digits.
Use the "UP" and "DOWN " buttons to adjust the light output
intensity between 000 ~ 100. A set value of 000 will give you
the weakest output intensity and a set value of 100 will give
you the full intensity.
4. Lamp Mode Menu:
Press “MENU” button and select “Lamp Mode” menu, the LCD will display “LampMode Tungdten”, user can press “UP” or “DOWN” button to switch to “LampMode LED” menu.
5. Fade Time Menu:
Press “MENU” button and select “Fade Time” menu, the LCD will display “FadeTime” followed by three digits, user can press “UP” or “DOWN” button set the desired Fade time value from 000 to 100.
Speed
100
MODE MENU UP DOWN
Dimmer
001
MODE MENU UP DOWN
Dimmer
100
MODE MENU UP DOWN
LampMode
LED
MODE MENU UP DOWN
FadeTime
000
MODE MENU UP DOWN
8
Lumina Strip
Lumina Strip RDM Parameter IDs
The following tables outline and describe all the RDM parameters IDs associated with Lumina Strip.
Table 1: Lumina Strip RDM Parameter IDs
Lumina Strip
Elation lighting
Lumina Strip LED Light
Lumina Strip
Channel Parameter details:
Parameters
Dimmer DMX value
Functions
0---100% equal to intensity 0
---
100%
Program
DMX 0
--
7 for local DMX Dimmer Mode
DMX 8
DMX 16
DMX 24
--
15 Full
--
23 Program1
--
31 Program2
DMX 32
--
39 Program3
…
DMX 136
--
143 Program16
DMX 144
--
255 Auto
Speed
FadeTime
LampMode
Play Mode
Master
The bigger DMX value is, the faster the Programe runs
DMX value 0
--100% equals to FadeTime 0---100%
DMX 0 -127 for choosing the work mode of the LED
DMX 128
--
255 for choosing Tungsten
DMX 0
--
80 to stop the Program
DMX 81 -160 to pause the Program
DMX 161
--
255 to play the Program
DMX value 0--- 100% equals to Program intensity 0--100%
1. Selecting DMX Address
Press “MENU” button and select DMX channel address menu after having
activated the Receive Mode. The DMX Address Mode is indicated by
"Address” followed by three digits 001~ 512. You can tap the “UP” and
“DOWN” buttons to change the DMX Address Value.
Address
001
MODE MENU UP DOWN
Note: There is no DMX input in the master unit of the connection.
2. Selecting the DMX Channel
Press “MENU” button and select Channel Mode. The Channel Mode is indicated by "Channel" followed by two digits 07,08, 10, 11,16. You can tap the "UP” and "DOWN" buttons to change the setting from 07, 08, 10,11 or
16 which you wish to run.
NOTE:
Channel
01
MODE MENU UP DOWN
1. When CH:07 is displayed, overall channels will be controlled by one DMX channel.
2. When CH:08 is displayed, channel 1 and 2 will be controlled by one DMX channel, channel3 and 4 will
be controlled by one DMX channel, and so forth, channel 9 and 10 will be controlled by another .
3. When CH:10 is displayed, channel1~10 will control an individual LED fixture.
4. When CH:11 is displayed, each channel will be controlled by one DMX channel. This is the factory
default setting.
5. When CH:16 is displayed, 1-10 will control the LED, and the 11-16 will control to run a special
program.
7
Table 1: Lumina Strip RDM Parameter IDs
Lumina Strip
9
10
Lumina Strip
Table 2: Lumina Strip Manufacturer Status IDs
Manufacturer Defined Status IDs
Manufacturer Specific messages are in the range of 0x8000 —0xFFDF. Each Manufacturer-specific
Status ID shall have a unique meaning, which shall be consistent across all products having a given
Manufacturer ID. See Table B-2, ANSI E1.20-2010
Status Message ID
8100H
Value Data Value 1 Data Value 2
00H 00H
Status ID Description
ALL OK
Table 3: Lumina Strip Manufacturer Specific PIDs
Manufacturer Specific PIDs
Manufacturer Defind PIDs range is 0x8000-0xffdf. See Table A-3, ANSI E1.20-2010
Get
Allowed
SET
Allowed
RDM Parameter
Id’s
TYPE LENGTH UNIT PREFIX MIN MAX DEFAULT DESCRIPTION
8A08H
8A09H
8A01H
8A42H
8A0BH
U8
U8
U8
U8
U8
1
1
1
1
1
NONE NONE 0
NONE NONE
NONE NONE
1
0
NONE NONE
1
NONE NONE
0
18
100
99
1
2
1
1
1
1
0 chase program chase speed chase dimmer lamp mode fade time percent
Lumina Strip
PROGRAM UPDATE
Programs of this device can be updated via the RDM interface with proper tool named SC-NODE and RDM Program Tool. Connect the Lumina Strip to the output terminal of the SC-NODE then connect the SC-NODE to the PC, run the TCP/IP setting, see the following figures for details.
After the TCP/IP is set, run the RDM_Program_Tool.exe software, the tool will search RDM devices automatically for the first time, user may also search devices via ArtTod Control command.
When the software searched a RDM device, the RDM UID will be listed in the “RDM UID Lists”. Select the listing
RDM UID, then press “Update Selected Device” command to upload the desired updating program, press “open” command to start updating. After finishing updating, the software will start to search device once again, and showing
“update successful!”, means program updating completed.
11
12
Lumina Strip
TECHNICAL SPECIFICATIONS
Power Thru/Input AC100~240V,50/60Hz
IP Rating IP20
Power Consumption 90W
Weight 6.3Kg
Fuse T3.15A 250V 5*20mm
Dimension 1040(L)*130(W)*140(H)mm.
Please note: Specifications and improvements in the design of this product and this manual are subject to change without any prior notice.
Explanation For The Label
RDM/DMX OUT
1=Ground
2=Data-
3=Data+
4,5=NC
Neutral
Earth
Live
POWER THRU(15A Max.)
0.2m
Made in China
C
CM
US
Intertek
4 0 0 1 5 8 8
CONFORMS TO
UL STD. 1573
CERTIFIED TO
CSA STD. C22.2
NO.166
MODE DISPLAY
DMX
Address
Channel
No DMX
Glide
Program
Speed
Program
Master
Lamp Mode
Fade Time
001 -- 512
07 / 08 / 10 / 11 / 16
OFF / Hold / Program
OFF / ON
Full / 01-- 16 / Auto
01 -- 100
00 -- 100
Tungsten / LED
00 -- 100
MODE UP
POWER
RDM/DMX
DOWN
Lumina Strip
WARNING: / ATTENTION:
RISK OF FIRE AND ELECTRIC SHOCK
RISQUE DE CHOC ELECTRIQUE ET INCENDIE
DRY LOCATIONS
EMPLACEMENTS SECS
MINIMUM SAFETY DIST ANCE TO FLAMMABLE MA TERIALS: 0.2m.
DISTANCE DE SECURITE AUX MATERIAUX COMBUSTIBLES: 0.2m.
TEMPERA TURE DE FONCTIONNEMENT
NOT FOR RESIDENTIAL / HOUSEHOLD USE.
PAS POUR USAGE RESIDENTIEL / MENAGE.
POUR LES CONNEXIONS D'ALIMENT ATION DE FIL D'UNE NOT ATION
O
MINIMALE DE 60 C
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful lnterference. and (2) this device must accept any interference received, including interference that may cause undesired operation.
FOR SAFETY INSTRUCTION AND
MOUNTING OPTIONS REFER TO
USER MANUAL
FUSE
POWER
RDM/DMX IN
POWER IN:
100-240V~, 50/60Hz
FUSE:
T3.15A 250V 5x20mm
Power Consumption:
90W Max.
1=Ground
2=Data-
3=Data+
4,5=NC
Live
Earth
Neutral
POWER IN(15A Max.) m m y y
Indicating that the ambient temperature should not be above 40 degrees.
Minimum safety distance to lighted object: 0.2m.
SPECIAL NOTE
This fixture can be easily mounted with the provided mount assemble, meanwhile a safety rope(sold separately) is always required to ensure the mounting safety of the fixture by attached and fastened through safety chain
/cord attachment point. This safety rope can hold at least 10 times the weight of the fixture and with a screw on it.
Mount Assemble
Safety Rope
Mount Assemble
advertisement
Related manuals
advertisement