JP-4HD

HANDS-FREE COLOR VIDEO INTERCOM SUB MASTER STATION

INSTALLATION & OPERATION MANUAL

JP-4HD

Thank you for selecting Aiphone for your communication and security needs. Please read this manual carefully before using this system.

* Please make sure to read this manual for safe and correct use of the system, and keep it in a safe place for future reference.

Please note that images and illustrations depicted in this manual may differ from the actual product.

2

CONTENTS

PRECAUTIONS ........................... 4

WARNING ........................................... 4

CAUTION ............................................ 4

GENERAL PRECAUTIONS ............... 4

NOTICES ............................................ 5

PACKAGE CONTENTS ............... 5

INSTALLATION ............................... 6

CONNECTIONS ........................... 6

Notes about handling cables ........... 6

Basic connection methods .............. 7

Connecting external devices

(using the option connector) ........... 8

MOUNTING .................................. 8

Mounting locations ........................... 8

Mounting procedure ......................... 9

SETTINGS AFTER

INSTALLATION .......................... 10

[INSTALL] menu .............................. 10

Assigning an ID to station

[ID SETTING] ....................................11

Initializing station [INITIALIZE] .......11

Identifying software version

[SOFTWARE VERSION] ...................11

PART NAMES ................................ 12

Front panel ...................................... 12

Screen .............................................. 13

SETTING AND ADJUSTMENT ..... 14

SETTING LIST ........................... 14

SETTING AND ADJUSTMENT

DETAILS .................................... 15

Setting the PIN

[GENERAL] - [PIN SETTING] .......... 15

Call settings [CALL] ........................ 15

■ Designate door stations allowed to call-in to this station

[DOOR STATION SETTINGS] ...............15

■ Designate residential station(s) that receive a call from this station

[ROOM STATION CALL SETTINGS] .....16

Setting the microphone on/off for a call from a residential station

[TALK] - [PRIVACY MODE] ............. 16

Setting for indoor monitoring

[MONITOR] - [ROOM MONITOR] .... 16

Enabling/Disabling the operation sound

[GENERAL] - [SOUND SETTING] -

[AUDIBLE TOUCH TONE] ............... 17

Enabling/Disabling door release

[GENERAL] - [DOOR RELEASE] .... 17

Adjusting brightness and volume

[ADJUST] ......................................... 17

USING THE SYSTEM .................... 18

ANSWERING A CALL ............... 18

Answering a call from a door station .............................................. 18

■ Receiving a call while talking with another door station ........................19

■ Receiving a call while talking with another residential station ...............19

Answering a call from another residential station ........................... 19

■ When PRIVACY MODE is set to

“ENABLE” ...............................................19

Adjusting the display mode for viewing images at a video door station .............................................. 19

■ Switching Zoom/Wide .............................19

■ Pan & Tilt ................................................20

Adjusting images [IMAGE] ............. 20

■ Adjusting screen brightness [ ] ..........20

■ Adjusting viewability of images

[ADJUST] ...............................................20

Adjusting the speaker or handset volume [VOLUME] ........................... 21

Door release [DOOR RELEASE] .... 21

Transferring a door call to another residential station [ROOM CALL] ... 22

CALLING/MONITORING

OTHER STATIONS .................... 23

Calling all residential stations simultaneously ............................... 23

Calling another residential station

.......................................................... 23

Monitoring ....................................... 24

■ Monitoring door station (entrance) .........24

■ Monitoring residential station

(Audio only) ............................................24

USING THE SECURITY

FUNCTION ................................ 25

FUNCTIONS COMBINED WITH

EXTERNAL DEVICES .............. 26

Triggering an alarm by using an external device ................................ 26

Releasing a door with another door release button ........................ 26

Activating an external device ........ 26

Using a foot switch ......................... 26

APPENDIX ..................................... 27

TECHNICAL PRECAUTIONS ... 27

SPECIFICATIONS ..................... 27

WARRANTY ................ Back cover

Term defi nition

This manual uses "residential station" as the common term for "master station" and "sub master station".

3

PRECAUTIONS

Prohibited Do not dismantle unit Keep unit away from water General precautions

WARNING

Negligence could result in death or serious injury.

1. Do not dismantle or alter the unit. Fire or electric shock could result.

2. Keep the unit away from water or any other liquid.

Fire or electric shock could result.

3. High voltage is present internally. Do not open the case.

Electric shock could result.

4. Do not connect any non-specifi ed power source to the +, - terminals. Also, do not install two power supplies in parallel to a single input. Fire or damage to the unit could result.

5. Do not connect any terminal on the unit to an AC power line.

Fire or electric shock could result.

6. Do not use power supply with a voltage other than specifi ed.

Fire or electric shock could result.

7. Keep AC cord from being marred or crushed. If the AC cord is damaged, fi re or electric shock could result.

8. Do not plug or unplug unit with wet hands. Electric shock could result.

9. Insert AC plug completely and securely into AC outlet.

Otherwise, fi re or electric shock could result.

10. Periodically check for and remove dust on the power plug. If dust is left, it could cause the power plug to heat up, resulting in fi re.

11. Do not put any metal or fl ammable material into the unit through the openings. Fire, electric shock, or unit trouble could result.

CAUTION

Negligence could result in injury or damage to property.

1. Do not install or make any wire terminations while power supply is plugged in. It can cause electrical shock or damage to the unit.

2. When mounting the unit on a wall, install the unit in a convenient location, but not where it could be jarred or bumped. Injury could result.

3. Before turning on power, make sure wires are not crossed or shorted. Fire or electric shock could result.

4. Do not install the unit in locations subject to frequent vibration or impact. It may fall or tip over, resulting in damage to the unit or personal injury.

5. For power supply, use Aiphone power supply model specifi ed for use with system. If non-specifi ed product is used, fi re or malfunction could result.

6. Do not put anything on the unit or cover the unit with cloth, etc.

Fire or unit trouble could result.

7. Do not perform a touchscreen operation with a sharp instrument such as a ballpoint pen or other metal objects. The touchscreen may get broken causing leakage of the liquid crystal inside the screen. If you get the liquid crystal in your eye or mouth, wash it away immediately.

8. Do not install the unit in any of the following locations. Fire, electric shock, or unit trouble could result.

* Places under direct sunlight or near heating equipment that varies in temperature.

* Places subject to dust, oil, chemicals, hydrogen sulfi de (hot spring).

* Places subject to moisture and humidity extremes, such as bathrooms, cellars, greenhouses, etc.

* Places where the temperature is low, such as inside a refrigerated area or in front of an air conditioner.

* Places subject to steam or smoke (near heating or cooking surfaces).

* Where noise generating devices such as dimmer switches or inverter electrical appliances are closeby.

9. Do not apply high pressure on the screen. If fractured, injury could result.

10. If the LCD is punctured, do not touch the liquid crystal inside.

Infl ammation could result. If contact should occur, fl ush or rinse area with water thoroughly and consult your doctor.

11. Do not use the handset when you perform a call test, otherwise it may cause damage to your ear. Be sure to use the built-in speaker.

12. Be sure to perform a call test with the handset on the hook. If you operate the hook switch with the handset on your ear, a sudden call etc. may arrive causing damage to your ear.

13. The unit must be installed and wired by a qualifi ed technician.

GENERAL PRECAUTIONS

1. Keep the unit more than 1m (3.3') away from radio or TV sets.

2. Keep the intercom wires more than 30cm (12'') away from AC

100-240V wiring. AC induced noise and/or unit malfunction could result.

3. Comply with all third party manufacturing specifi cations that will be used with this system (sensors, door releases, etc.).

4. If the unit is down or does not operate properly, unplug the power supply or turn off the POWER switches.

5. When wall-mounted, the top of the unit may darken. This does not indicate a malfunction.

6. The unit case may become warm with use, but this is not a unit malfunction.

7. If it is used close to a cellular phone, the unit may malfunction.

8. The unit can be damaged if dropped. Handle with care.

9. The unit will not work during power failure.

10. In areas where broadcasting station antennas are close by, the intercom system may be affected by radio frequency interference.

11. All the units, except for door stations, are designed for indoor use only. Do not use at outdoor locations.

12. Please note the LCD panel, though manufactured with very high precision techniques, inevitably will have a very small portion of its image elements always lit or not lit at all. This is not considered a unit malfunction.

13. Environmental sound around the unit may hinder smooth communication, but this is not a malfunction.

14. The unit has audio monitoring function between residential stations. When using this function for baby monitoring, never install the unit within reach of children to prevent strangulation with coil cord or wires.

4

15. Refrain from using the color monitor station in sunlit areas.

16. At night, due to reduced lighting on the object, the screen sees more noise and faces become more diffi cult to see, but this is not a malfunction.

17. For hands-free communication:

If you stand too far away, it may be diffi cult for the other person to hear the communication.

18. If there are loud noises around the unit (such as music playing or children crying), the sound may break up and be diffi cult to hear.

19. During communication, if you speak before the other person has fi nished talking, your voice may not come through clearly.

Communication will proceed smoothly if you wait until the other person has fi nished before speaking.

20. At a gate or porch illuminated by a fl uorescent lamp, the image may vary, but this is not a malfunction.

21. The outline of video images displayed by the video door station may differ from that of the actual person(s) or background, but this is not a malfunction.

22. If the screen of a video door station freezes during wintertime, the image may become diffi cult to see or the call button (including the call button of audio door station) may not move, but this is not a malfunction.

23. Aiphone assumes no responsibility for corruption of saved information (such as changes to or deletion of saved information).

Please be aware of this in advance.

24. Warm-color lighting shining on the video door station may change the tint of the image on the screen.

25. When outside temperature lowers sharply after rainfall, etc., the inside of the camera may fog up slightly, causing a blurry image, but this is not a malfunction. Normal operation will be restored when moisture evaporates.

26. When the unit's screen is illuminated with strong light, the image looks white or silhouetted, but this is not a malfunction.

27. When putting a hearing aid into T-mode and approaching the unit, the intercom system may be affected by radio frequency interference etc., depending on the installation environment.

28. The handset may get warm, but this is not a malfunction.

NOTICES

•

•

•

•

•

•

•

•

We will under no conditions be liable for damage occurring due to the inability to communicate due to malfunctions, problems, or operational errors in this product.

We will under no conditions be liable for any damages or losses resulting from this product's contents or specifi cations.

This manual was created by Aiphone Co., Ltd., all rights reserved.

Copying, in part or in whole, this manual without prior permission from Aiphone Co., Ltd. is strictly forbidden.

Please note that images and illustrations depicted in this manual may differ from the actual ones.

Please note that this manual may be revised or changed without prior notice.

Please note that product specifi cations may be changed for the sake of improvement without prior notice.

This system is not intended for life support or crime prevention. It is a supplementary means of conveying information. Aiphone will under no conditions be liable for loss of life or property which occurs while the system is being operated.

The discrimination between day and night is performed automatically by the door station. Though the discrimination result may vary depending on the installation environment, it is not a malfunction.

PACKAGE CONTENTS

Verify that the following parts are included.

The unit 6-pin option connector Installation & Operation Manual

5

6

INSTALLATION

CONNECTIONS

Notes about handling cables

* Cables and connectors are not included with the product.

Notes on cables (for door stations, etc.)

• Use PE (polyethylene)-insulated PVC jacket cable.

Parallel or jacketed 2-conductor, mid-capacitance, non-shielded cable is recommended.

• Never use individual conductors, twisted pair cable, or coaxial cable.

Notes on CAT5e cables (for residential stations)

• Do not bend the cables to an extent where the radius is less than 25 mm (1”). Communication failure could result.

CAT5e cable

25mm (1") or more

• Arrange the color code of the RJ45 connections in accordance with EIA/TIA-568A or 568B.

Pair2 Pair3

Pair3 Pair1 Pair4 Pair2 Pair1 Pair4

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

T568A T568B

• Be sure to check the condition of cable connections with a

LAN checker before connecting with a LAN cable.

• An RJ45 connector with a cover cannot be connected to the port for CAT5e. Use a cable without a cover.

CAT5e cable

Less than 25mm (1")

• Do not remove the CAT5e cable jacket more than necessary.

• This unit is not a computer peripheral. Do not connect it to a LAN network.

• Do not pull or put excess strain on CAT5e cables.

• Use a straight-through cable for connecting units.

Basic connection methods

Up to seven sub master stations can be connected to the system. The connecting method for sub master stations differs depending on the system connection method, “station-to-station wiring” or “home-run wiring”.

Station-to-station (daisy-chained) wiring

PS24

2

P

Master station

(ID = 1)

JP-4MED

M (OUT)

P. 8

BP2

BP2

BP1

BP1

FS

FS

Sub master station 1 (ID = 2)

JP-4HD

Sub master station 2 (ID = 3)

JP-4HD

M (IN)

: CATe5 (non-shielded)

2

Sub master station 3 (ID = 4)

JP-4HD

Sub master station 4 (ID = 5)

JP-4HD

: Ø1.0mm, 18AWG 2 conductor cable

NP: Non-polarized

P: Polarized

M (OUT) M (IN)

Sub master station 5 (ID = 6)

JP-4HD

M (OUT) M (IN)

Sub master station 6 (ID = 7)

JP-4HD

M (OUT) M (IN)

Sub master station 7 (ID = 8)

JP-4HD

M (OUT) M (IN)

PS24

2

P

M (OUT) M (IN)

6-pin option connector

M (OUT) M (IN)

P. 8

BP2

BP2

BP1

BP1

FS

FS

PS24

2

P

M (OUT)

Home-run wiring

Master station

(ID = 1)

JP-4MED

M (OUT)

PS24

2

P

Sub master station 2

(ID = 3)

JP-4HD

Sub master station 1

(ID = 2)

JP-4HD

M (IN)

Sub master station 4

(ID = 5)

JP-4HD

Sub master station 3

(ID = 4)

JP-4HD

M (IN)

M (IN)

M (IN)

6-pin option connector

M (IN)

M (OUT)

M (OUT)

M (OUT)

M (OUT)

Power supply for Group 1

DC24V

Power supply for Group 2

DC24V

M (OUT)

Distribution adaptor

JP-8Z

M (OUT)

Sub master station 5 (ID = 6)

JP-4HD

Sub master station 6 (ID = 7)

JP-4HD

M (IN)

Sub master station 7

(ID = 8)

JP-4HD

M (OUT) M (IN)

2

2

P

PS24

P

PS24

M (IN)

•

•

•

•

•

NOTES:

• The power supply method shown in the above fi gures is an example. (

→ Refer to "Installation manual" for the master station)

Do not use the unused terminals and ports for other purposes.

In order to prevent miswiring, label both ends of each cable with the unit and terminal names to which they are to be connected.

For connecting other manufacturers’ products, refer to the instruction manuals for those products.

The positions of the terminals on the above illustrations differ from the actual product. This is to simplify the diagram.

This unit is not a computer peripheral. Do not connect it to a LAN network.

7

8

Connecting external devices (using the option connector)

The 6-pin option connector of this station can be used with external devices.

CAUTION

•

•

To prevent shorts, cut unused lead wires at insulation.

Be sure to perform an operation check after the connection to check for miswiring.

To 6-pin connector

Black

Gray

White

Blue

Orange

Yellow

FS

FS+

BP2

BP2+

BP1

BP1+

1

External talk input

3

External door release input 2

2

External door release input 1

1

External talk input

A foot switch can be connected to operate the TALK or END function hands-free.

Input method N/O or N/C dry closure contact (start signal only detection method)

100 mS or more Detection confi rmation time

Contact resistance During N/O dry closure: Less than 700 Ω

During N/C dry closure: At least 15 kΩ

Terminal short current Less than 10 mA

Voltage between terminals

Less than 5 V DC (when open between terminals)

2 , 3

External door release input 1, 2

Connect a door release button to each pair of these inputs.

Input method N/O or N/C dry closure contact (start signal only detection method)

Detection confi rmation time

Contact resistance

100 mS or more

During N/O dry closure: Less than 700 Ω

During N/C dry closure: At least 15 kΩ

Terminal short current Less than 10 mA

Voltage between terminals

Less than 5 V DC (when open between terminals)

MOUNTING

Mounting locations

• Install this station in a place where the screen is not exposed to direct sunlight.

• Allow at least 15 cm (6") above and 25 cm (9") below center of the mounting bracket for installation of the station.

15 cm (6") or more

25 cm (9") or more

Mounting procedure

<Back wiring>

1 Fasten the mounting bracket to the wall.

The unit

3-gang box

83.5mm (3-5/16")

Mounting bracket

(pre-attached by factory)

CAT5e cable

Mounting screw × 4 (not included)

Screw shaft: Ø4.1 or less

Slotted head: Ø8.2 or less, 3.0mm or less in height

3 Mount the unit on the mounting bracket.

2 Connect the CAT5e cables to the unit.

Opening/closing the terminal cover

To open:

Slide the cover to the right until it clicks, and then open.

To close:

Close the cover, and then slide it to the left until it clicks.

* Make sure the cover is locked.

Close

Open

Terminal cover

<Surface wiring>

When the wiring is not coming through the wall, the cable and wires can be routed through the top or bottom of the cable inlet.

Remove cable inlet plate on the upper part of the unit to allow passage of the wiring into the unit.

Cable inlet plate

CAT5e cable

92mm (3-5/8")

The unit

83.5mm (3-5/16")

Mounting bracket

(pre-attached by factory)

Wood mounting screw × 4 (not included)

Screw shaft: Ø4.1 or less

Slotted head: Ø8.2 or less, 3.0mm or less in height

9

SETTINGS AFTER INSTALLATION

The following settings should be done by the installer or the administrator of this system.

Be sure to assign ID to all the sub master stations connected to this system.

NOTE:

It is recommended to set the display language for the screen to the language needed on the master station. (Default language: English)

3 Touch ENTER to continue.

[INSTALL] menu

First display the [INSTALL] menu window to make the settings for the installer.

* The screen will turn off if approx. one minute elapses with no operation during the setting. When this occurs, display the

[INSTALL] menu window again.

1 If screen is off, press the [HOME] button, or touch screen to turn it on.

The [INSTALL] menu window is displayed.

or

2 Press and hold the [HOME] button, then touch

SETTINGS → INSTALL .

* If the [HOME] button is released before this step has been performed, the display returns to [HOME] window.

Program the settings for each item as needed.

* If you wish to return to the previous window, touch

BACK .

A notice message is displayed. You can release the [HOME] button.

10

Assigning an ID to station

[ID SETTING]

* The ID setting should be made to all the sub master stations individually.

* Do not assign the same ID to two or more sub master stations.

1 From the [INSTALL] menu window, touch ID SETTING .

"2" to "8" are displayed.

The current ID number is highlighted.

2 To change the ID number, touch the number until highlighted .

3 Touch ENTER to save ID.

* When ID is changed, this station will be rebooted.

Initializing station [INITIALIZE]

By initializing this station, all settings return to default.

1 From th e [INSTALL] menu window, touch INITIALIZE .

A notice message is displayed.

2 Touch YES to continue initializing.

To cancel initializing, touch NO .

Identifying software version

[SOFTWARE VERSION]

You can identify the software version of this station. Use this item when doing maintenance etc.

From the [INSTALL] menu window, touch

SOFTWARE VERSION .

The ID number and software version of this station will be displayed.

11

PART NAMES

Front panel

Remove protective fi lm from screen before use.

Handset

Color LCD touchscreen

See the next page for details.

JP-4HD

Status LED

Indicates current status of this station by lighting up or blinking.

See the table below for details.

Speaker

Call tones, audio from a station, and alarms are heard from here.

Hearing aid T-mode compatibility symbol

Reset button

Press this button to reboot this station when this station gets out of commission etc.

* While being rebooted, the status LED blinks.

Microphone

Sends audio from this station to other stations.

HOME button

Turns on the color LCD screen.

Not equipped with an SD card slot.

Do not try to open the part that looks like a card slot by force. It could get broken.

Status LED table

Color

Orange

Green

Green

Red

Red

Orange

Indication pattern

Blinking every 0.5 seconds

Solid light

Solid light

Solid light

Blinking every 0.5 seconds

Blinking every 0.5 seconds

Light blue Blinking every 0.5 seconds

Station status

Incoming call from door station

Communicating with a door station or a residential station.

Monitoring a door station or a residential station.

Security mode is active.

Sounding the security alarm.

Calling a single or all residential stations or being called from a residential station.

Rebooting.

12

Screen

This station features a touchscreen. Simply touch the icons or buttons displayed on the screen.

The following are examples of typical windows and icons.

* The displayed windows and icons may differ depending on the devices connected to this system.

HOME window

This window appears when the screen is turned on.

ROOM CALL (→P. 22)

Touch this to call another residential station or all the residential stations simultaneously.

MONITOR (→P. 24)

Touch this to monitor a door station or another residential station.

OFF

Touch this to turn screen off and set this station in standby mode.

SETTINGS (→P. 14)

Touch this to program settings and adjustments.

OPTION (→P. 26)

Touch this to activate the external device(s) connected to the master station.

* Depending on the master station settings, this button may not be displayed.

Communication with a video door station

Shows the status (calling, talking, etc.) of this station.

Moves the images from right to left or up and down.

<Up>, <Right>

<Down>, <Left>

Displays which door station is calling.

Appears when 1 or 2 is touched to release the corresponding door.

Zoom mode

Switches the display mode between zoom and wide.

Frequently-used icons

/

Scrolls the window up and down to display more options.

ENTER

Touch to select item or value.

NOTE: The above example may differ from actual product.

BACK

Touch to return to previous window.

13

SETTING AND ADJUSTMENT

Program system settings using master station after all devices are installed. Program individual device settings on all master and sub master stations separately.

Mainly, the results of settings made on the master station are also applied to the sub master stations. The settings and adjustments to be made on an individual sub master station are as in the table below.

NOTE:

First change the display language for the screen to the language you need on the master station before starting the settings and adjustments on a sub master station.

SETTING LIST

To begin, touch SETTINGS from HOME window to program the settings before using this station for the fi rst time.

Category

CALL

Item

DOOR STATION

SETTINGS * 1

Sub item Setting range

DOOR1/DOOR2/DOOR3/DOOR4 ENABLE/DISABLE

Default

ENABLE (for each)

ROOM STATION CALL

SETTINGS * 1

TALK

MONITOR

PRIVACY MODE

ROOM MONITOR

SOUND SETTING AUDIBLE TOUCH TONE -

-

-

ID1/ID2/ID3/ID4/ID5/ID6/ID7/ID8

(The ID number of this station is not displayed.)

ENABLE/DISABLE

ENABLE/DISABLE

ENABLE/DISABLE

ENABLE/DISABLE

ENABLE (for each)

DISABLE

ENABLE

ENABLE

DOOR

RELEASE * 1

PIN SETTING

ADJUST

-

-

VOLUME

DOOR1/DOOR2/DOOR3/DOOR4 ENABLE/DISABLE

-

CURRENT PIN/

NEW PIN

/ / /

(Select four numbers from 0 – 9)

1 - 10

0 (mute), 1 - 10

ENABLE (for each)

1111

6

6 (for each)

NOTES:

• The screen will turn off if approx. one minute elapses with no operation on this station. When it occurs, if the setting is not complete, start from the beginning.

• The above list is a brief overview of the setting items available on this station. The descriptions, and the style and order of descriptions do not necessarily equate with the actual displays.

* 1 : It is required to enter PIN before programming can begin.

14

SETTING AND ADJUSTMENT DETAILS

Setting the PIN

[GENERAL] - [PIN SETTING]

Call settings [CALL]

You can make the following settings for call.

When this station is started up for the fi rst time or after this station is rebooted, program this setting fi rst.

Some settings require a PIN to prevent content from being altered by unauthorized individuals.

Create a unique PIN to properly secure settings.

* The factory default is "1111".

1 From HOME window, touch SETTINGS →

GENERAL → PIN SETTING .

The current PIN entry window is displayed.

2 Enter the current 4-digit PIN. (For fi rst time users, default is "1111").

3 Touch ENTER .

The new PIN entry window is displayed.

* If a wrong PIN is entered, an error message will be displayed requesting the correct PIN.

4 Enter the new 4-digit PIN.

5 When the setting has fi nished, touch ENTER .

The new PIN is memorized.

You can change the PIN any time by following the above procedure.

NOTES:

• When this station is initialized by the [INSTALL] menu, the PIN returns to "1111" (default).

• You must keep the PIN without fail. If you forget the PIN, you must initialize this station by the [INSTALL] menu, thus all the setting contents return to default.

■ Designate door stations allowed to call-in to this station [DOOR STATION SETTINGS]

You can set whether or not this station receives a call from the door station 1 to 4. Individual settings can be programmed for each door station. When there is a call from a door station that is set to “DISABLE”, no call tone sounds and no image is displayed on this station.

1 From HOME window, touch SETTINGS → CALL →

DOOR STATION SETTINGS .

The PIN entry window is displayed.

2 Enter the 4-digit PIN by using the touchscreen, and then touch ENTER .

“DOOR1” to “DOOR4” are displayed.

* If a wrong PIN has been entered, an error message is displayed. Enter correct PIN.

3 To change the setting for “DOOR1”, select “ENABLE” or “DISABLE”.

ENABLE ......Allows this station to receive a call from door station 1.

DISABLE .....Does not allow this station to receive a call from door station 1.

4 Repeat for other door stations.

5 When the setting has fi nished, touch ENTER .

15

■ Designate residential station(s) that receive a call from this station [ROOM STATION CALL

SETTINGS]

You can set whether or not the other residential stations receive a call (all call or single call) from this station. The setting can be made for each station. A station set to “DISABLE” will not receive a call from this station.

1 From HOME window, touch SETTINGS → CALL →

ROOM STATION CALL SETTINGS .

The PIN entry window is displayed.

2 Enter the 4-digit PIN by using the touchscreen, and then touch ENTER .

“ID 1” to “ID 8” (other than this station) are displayed.

•

•

"ID1" shows the master station.

"ID2" shows the sub master station whose ID switch is set to “2”. (The same applies to "ID3" to "ID8".)

* The ID number of this station is not displayed.

* If a wrong PIN has been entered, an error message is displayed. Enter correct PIN. (See page 15 for PIN settings).

3 To change the setting for “ID2”, select “ENABLE” or

“DISABLE”.

ENABLE .....Allows the station to receive a call from this station.

DISABLE ....Does not allow the station to receive a call from this station.

4 Repeat for other stations.

* Use " " or " " to scroll between ID numbers.

5 When the setting has fi nished, touch ENTER .

Setting the microphone on/off for a call from a residential station [TALK] -

[PRIVACY MODE]

This setting enables or disables the PRIVACY MODE.

When receiving a call from a residential station individually;

•

•

When set to "ENABLE", privacy mode is set. In this state, a caller cannot hear audio from this station.

When set to "DISABLE", audio can be heard from this station allowing for 2-way communication.

1 From HOME window, touch SETTINGS → TALK .

2 Touch PRIVACY MODE and select “ENABLE” or

“DISABLE”.

3 When the setting has fi nished, touch ENTER .

Setting for indoor monitoring

[MONITOR] - [ROOM MONITOR]

When set to “ENABLE”, this station can be monitored by the other residential stations. When set to “DISABLE”, this station cannot be monitored by other stations.

1 From HOME window, touch SETTINGS →

MONITOR .

2 Touch ROOM MONITOR and select “ENABLE” or

“DISABLE”.

3 When the setting has fi nished, touch ENTER .

16

Enabling/Disabling the operation sound

[GENERAL] - [SOUND SETTING] -

[AUDIBLE TOUCH TONE]

You can make this station sound a beep whenever the touchscreen is touched.

1 From HOME window, touch SETTINGS →

GENERAL → SOUND SETTING .

2 Touch AUDIBLE TOUCH TONE and select

“ENABLE” or “DISABLE”.

3 Touch ENTER to save change.

Adjusting brightness and volume

[ADJUST]

You can adjust the brightness of the screen and sound volumes.

1 From HOME window, touch SETTINGS → ADJUST .

The setting window appears.

Enabling/Disabling door release

[GENERAL] - [DOOR RELEASE]

You can make it possible (ENABLE) or not (DISABLE) to release door locks from this station.

Set for Door 1 to Door 4 individually.

If "DOOR1" is set to "ENABLE", when receiving a call from a door station or while monitoring an entrance, 1 and

2 are displayed on the screen. Touching 1 activates the door release device for Door 1.

If it is set to "DISABLE", 1 and 2 are grayed out and disabled.

1 From HOME window, touch SETTINGS →

GENERAL → DOOR RELEASE .

2 Enter the 4-digit PIN by using the touchscreen, then touch ENTER .

“DOOR1” to “DOOR4” are displayed.

* If a wrong PIN has been entered, an error message is displayed. Enter correct PIN. (See page 15 for PIN settings).

3 To change the setting for “DOOR1”, select “ENABLE” or “DISABLE”.

4 Repeat for other door stations.

5 When the setting has fi nished, touch ENTER .

..........Adjusts brightness of the screen.

.........Adjusts the speaker volume when talking in hands-free mode.

..........Adjusts the output volume when talking with handset.

...........Adjusts the volume of call tone from door station(s).

.........Adjusts the volume of call tone from other residential station(s).

(for calling both a single station and all stations)

Volume adjustment range: 0 (mute), 1 - 10

2 Touch or to adjust the levels.

3 Touch ENTER to save change.

17

USING THE SYSTEM

ANSWERING A CALL

When receiving a call from a door station

When there is a call from a video door station The call tone sounds, an image is on the screen, and audio from the door station can be heard.

Blinks

* When there is a call from a door station without a camera or another residential station, the station type image is displayed. (The image differs from the station type.)

Answering a call from a door station

To answer the call

Touch TALK or lift handset.

* While communicating with the caller, unlock the door or use other features by touching the following buttons.

Adjusting images (→P. 20) Volume (→P. 21) or

Door release

(→P. 21)

Begin talking with the caller.

* When talking in hands-free mode, the communication status is displayed. (below)

(When talking) (When listening to the caller)

Lights up.

Off

*

*

Lift handset at any time for privacy.

The display mode can be adjusted to view images.

(→P. 19)

OPTION (→P. 26)

* This may not be displayed depending on the setting.

Transferring (→P. 22)

To complete the communication

Touch END on the screen, press the [HOME] button, or hangup handset.

* Communication also ends automatically after 1 minute in hands-free mode, or after 3 minutes using handset.

NOTE:

If this station is not set to receive a call from a specifi c door station, there will be no call tone and no image displayed while the door station is calling in to this system. (To add door, see page 15.)

18

■ Receiving a call while talking with another door station

*

*

The call tone sounds in a lower volume.

The video image on the screen will continue to display current call.

To answer the second call

Conclude current talking to answer new call-in.

* If this station is not set to receive a specifi c door station, this station will not be able to answer the door station calling in to this system. (To add door, see page 15.)

■ Receiving a call while talking with another residential station

*

*

*

The call tone sounds in a lower volume.

The video image from the door station is displayed on the screen.

The call will stop and video image will disappear when the preset call duration time elapses, then the normal talking mode is restored.

To answer the call

Conclude talking with the residential station to answer door station.

* If this station is not set to receive a specifi c door station, this station will not be able to answer the door station calling in to this system. (To add door, see page 15.)

Adjusting the display mode for viewing images at a video door station

You can adjust the display mode for viewing images at a video door station by using the following functions.

■ Switching Zoom/Wide

Touch to zoom in. Touch to zoom out.

Wide

Zoom

Answering a call from another residential station

When receiving a call from another residential station, a call tone sounds and talking becomes enabled automatically.

*

*

*

*

Communication ends automatically after approx. 10 minutes.

The ID number of the calling station will not be displayed.

If another residential station is calling all the other stations simultaneously, touching TALK or lifting handset begins communication and ends call to all other stations.

Speaker volume can be adjusted during communication.

(→P. 21)

To complete communication

Touch END or press the [HOME] button.

■ When PRIVACY MODE is set to “ENABLE”

A calling another residential station will not hear sound or a response from this station until the call is answered by this station.

To respond to another residential station call, touch TALK or lift handset.

* Refer to page 16 for setting the PRIVACY MODE.

NOTES:

• Image will zoom to the preset position. Preset position can be adjusted on the master station. The preset position setting is applied to all the sub master stations automatically.

• Depending on the properties of the video door station camera, the wide image may appear more distorted than the zoom image. This is not a malfunction.

• In zoom mode, the image can be moved from right to left or up and down. (

→P. 20)

19

■ Pan & Tilt

When a zoom image is displayed, touching , , , on the screen moves the image as shown below.

■ Adjusting viewability of images [ADJUST]

If the image on the screen is hard to see due to bright light, adjust settings.

NOTE:

This function is not available for an image from a CCTV camera.

Bright light conditions (Day)

1 When an image is displayed, touch

IMAGE .

MENU →

The setting window appears.

2 Touch ADJUST .

A backlight adjustment is made to brighten the image.

NOTES:

• The image range of the zoom mode and wide mode differs. The edge of wide image will not be displayed with the zoom mode.

• At night, the image quality is degraded.

• At night, the object image may be blurred and less-visible when moving from right to left or up and down because illumination is reduced. The same applies to a moving object.

If a CCTV camera is connected instead of a video door station at entrance:

Zoom/Wide and Pan & Tilt functions are disabled.

Adjusting images [IMAGE]

While communicating with a door station, you can adjust the screen brightness and viewability of images.

* Adjustment can also be made while receiving a call from, communicating with, or monitoring a video door station (when

MENU is displayed on the screen).

■ Adjusting screen brightness [ ]

You can adjust the brightness of the screen in 10 levels.

1 Touch MENU → IMAGE .

To return the adjustment to default

Touch ADJUST again.

NOTES:

• The discrimination between day and night is performed automatically by the door station.

• On the master station, you can preset the backlight adjustment so that it is automatically activated whenever starting displaying an image during the day. This setting is also applied to all sub master stations automatically.

Dim light conditions (Night)

1 When an image is displayed, touch MENU →

IMAGE .

The setting window appears.

2 Touch ADJUST .

The image becomes more visible.

To return the adjustment to default

Touch ADJUST again.

NOTES:

• Any lighting adjustments return to default when the screen is turned off.

• ADJUST

changes camera shutter speed. As a result, visitor's face will be brighter but moving objects may appear blurred.

2 Touch

20

The setting window appears.

or to change the level.

Adjusting the speaker or handset volume

[VOLUME]

Volume can be adjusted at any time.

Adjusting range: 0 (mute), 1 - 10.

* This adjustment can be made while receiving a call, during communication, or while monitoring a station.

* " " is displayed both when adjusting the speaker and handset volume.

1 Touch MENU → VOLUME .

The setting window appears.

2 Touch or to reach desired level.

Door release [DOOR RELEASE]

Door release can be activated during a call-in, communication, or while monitoring a door station.

* Release a door when is displayed on the screen.

• is grayed out (disabled), check [DOOR

RELEASE], and change if needed. (→P. 17)

• It may not be possible to enable at [DOOR

RELEASE] if it is set to be disabled by the [INSTALL] menu on the master station.

Touch either 1 or 2 to release door.

The door lock is released for the set door release time.

* If the door release time is set to “MOMENTARY” by the

[INSTALL] menu on the master station, it will be released for as long as the button is held.

CAUTION:

Always confi rm visitor identity if the door station has no camera.

When using JP-DVF-L, a video door station (guidanceenabled type)

JP-DVF-L has an output for door release etc. When receiving a call from or communicating with JP-DVF-L, touching 1 or

2 releases the door lock device etc. connected with the

JP-DVF-L for the set door release time.

21

Transferring a door call to another residential station [ROOM CALL]

You can transfer a call received from a door station to a single or all the other residential stations while communicating with it.

1 While talking with the door station, touch MENU →

ROOM CALL .

2 Select another residential station, or touch

ALL CALL to transfer the call to all other residential stations.

Priority of actions

The order of priority for two or more actions

(communication, calling, monitoring, etc.) performed at the same time is as follows.

Priority Action

1 (high) Triggering alarm (SECURITY)

2 Triggering alarm (OPTION) (when "ALARM AT

DOOR" is set to "ENABLE")

3

4

Communication with another station

Receiving a call from a door station

5

6

Calling all or a single residential station

Triggering alarm (OPTION) (when "ALARM AT

DOOR" is set to "DISABLE")

7 (low) Monitoring

* Later call from a door station has priority over earlier call from another door station.

When this station is receiving a call from a residential station, other residential stations cannot be used.

* You can call and talk to all or a single residential station while communicating with a door station.

* Later monitoring has priority over earlier one.

* Communication with the door station is suspended while forwarding call to residential stations.

Your speaking is heard and the image of the door station is displayed on the target residential station(s).

3 When someone touch TALK or lift handset on the target residential station (or one of the target stations), talking begins with the target station side.

4 Say that you will transfer the call from a door station to the target station, and then touch END .

At the same time, the communication between you and the door station ends

5 When someone touches TALK or lifts handset on the target station, he (or she) can talk with the door station side.

* If handset is lifted in step 3, hang up once and then lift handset again to talk with the door station side.

22

CALLING/MONITORING OTHER STATIONS

* Communication with a door station ends automatically after 1 minute in hands-free mode, or after 3 minutes using handset.

Communication with a residential station ends automatically after approx. 10 minutes.

Calling all residential stations simultaneously

* Residential stations must be set to receive a call from this station.

1 Press the [HOME] button, touch screen, or lift handset.

2 Touch ROOM CALL from HOME window.

3 Touch ALL CALL .

Calling another residential station

* Residential stations must be set to receive a call from this station.

1 Press the [HOME] button, touch screen, or lift handset.

2 Touch ROOM CALL from HOME window.

3 Touch the target station.

A call tone sounds on all the residential stations receiving the call.

After the call tone, audio from this station is heard at the target stations.

The station type image of this station is displayed on the screens of the target stations.

4 Begin talking.

* Audio from the target stations cannot be heard.

5 If someone touches TALK or lifts handset at one of the target stations, communication between this station and the target station is initiated.

To complete communication

Do one of the following.

•

•

Touch END on the screen.

Hang up handset.

• Press the [HOME] button.

* Use " " or " " to scroll between stations.

A call tone sounds at this station and the target station.

4 Hands-free communication between stations can be used.

* If the PRIVACY MODE is set to "ENABLE" on the target station, you cannot hear audio from the target station.

In such a case, you can talk with the target station side if handset is lifted or TALK is touched on the target station.

To complete communication

Do one of the following.

•

•

•

Touch END on the screen.

Hang up handset.

Press the [HOME] button.

23

Monitoring

You can monitor a door station or another residential station.

■ Monitoring door station (entrance)

* When monitoring an audio door station, only audio from the station is available. When monitoring a video door station, audio and video images are available.

1 Press the [HOME] button or touch screen.

2 Touch MONITOR from HOME window and select the door station to monitor.

*

*

Audio will be heard and if the station has a camera, images can be viewed.

During monitoring, audio cannot be heard with handset.

If there is a visitor at the entrance, touch TALK or lift handset to begin communication.

3 To end monitoring;

Touch BACK on the screen or press the [HOME] button.

Available functions during monitoring

• Zoom/Wide camera control (→P. 19)

* When monitoring is started, an image is shown in wide mode.

• Pan & Tilt (→P. 20)

•

•

•

Adjusting images (→P. 20)

Door release (→P. 21)

Volume control (→P. 21)

• OPTION (→P. 26)

If a CCTV camera is connected instead of a video door station at entrance:

Audio monitoring and communication is available if an audio door station is connected with a CCTV camera.

NOTES:

• Monitoring ends automatically after set time.

• The night illumination is automatically activated on door station, depending on settings.

■ Monitoring residential station (Audio only)

You can monitor sounds at another residential station.

1 Press the [HOME] button, touch screen, or lift handset.

2 Touch MONITOR from HOME window and select the station to monitor.

A call tone sounds at both this station and target station, and then the symbol image for monitoring is displayed on the screens of both stations.

* Use " " or " " to scroll between stations.

3 Audio from the target station can be heard at this station.

*

*

If there is no operation for approx. 1 minute, the screen turns off. (The monitoring is continued.)

If you have received a call from another station, monitoring is temporarily suspended. Monitoring resumes after call is fi nished.

4 To end monitoring;

Touch BACK on the screen or press the [HOME] button on this station.

NOTES:

• An alert will sound if another residential station has disabled the audio monitoring feature.

• While monitoring a residential station, no operation is possible on the target station. To end monitoring, make an ending operation on this station.

• A new monitoring action takes priority over current monitoring.

During monitoring, for example, if another station starts monitoring this station, current monitoring by this station is cancelled.

• Monitoring ends automatically after a lapse of set time.

24

USING THE SECURITY FUNCTION

* This function is available when the inputs 1, 2, and/or 3 of the master station are set to “SECURITY”, and a sensor is connected to each of the inputs.

The security mode can be set and activated on the master station. The following two security modes are available.

■ ARMED

Security mode when you are present.

The alarm gets enabled when the security mode is turned active.

■ ARMED AWAY

Security mode when you leave home/offi ce. Set a delay time for the alarm to enable after the security mode is activated.

When a sensor is trigered

A message is displayed, the sensor ID number is shown, the status LED blinks in red and an alarm sounds on all the residential stations.

Sensor

Blinks in red.

To stop alarm

* When “ARMED AWAY” mode is activated and the delay time is set; if a sensor is triggered before the delay time elapses, the preliminary alarm sounds. The alarm sounds after the delay time elapses.

[When there is no ALARM PIN]

Touch RESET .

[When there is an ALARM PIN]

* The ALARM PIN can be set on the master station only.

1 Touch RESET .

2 Enter the ALARM PIN and touch ENTER .

This station turns into the standby mode.

* If a wrong ALARM PIN has been entered, an error message is displayed. Enter correct ALARM PIN.

Alarm

NOTES:

• The alarm sounds in the maximum volume (10) even if the volume of call tone is set to 0.

• Door station 1 also sounds alarm and turns on the white LED.

• All the functions of this station are available while security is on.

25

FUNCTIONS COMBINED WITH EXTERNAL DEVICES

Triggering an alarm by using an external device

* This is available when the inputs 1, 2, and/or 3 of the master station are set to “UTILITY”, and an external device, such as a sensor or a call button, is connected to each of the inputs.

Activating an external device

* This is available when an external device is connected to the option contact outputs of the master station.

When an external device is triggered

A message is displayed, the external device ID is shown, and an alarm sounds on all the residential stations.

* The alarm will not sound when "ALARM AT DOOR" is set to "DISABLE" and the volume of call tone from a residential station is set to 0.

Activating external device

Touch OPTION from HOME window or while communicating with/monitoring a door station. The device will be triggered.

Transferring alarm to external device

When detecting designated action, this station transfers alarm to the device.

NOTE:

OPTION is not displayed on the screen.

To stop the alarm

Touch RESET , or press the [HOME] button.

NOTE:

If two or more inputs are triggered, the latter one takes priority.

Using a foot switch

* This is available when a foot switch is connected to the external talk inputs of this station.

A foot switch works similarly to touching TALK or END on the touchscreen.

Releasing a door with another door release button

* This is available when one or two door release buttons are connected to the external door release inputs 1 and/or 2 of this station.

The door at the door station 1 or 2, or both doors can be unlocked by pressing the connected button(s) during a call-in, communication, or while monitoring a door station.

26

APPENDIX

TECHNICAL PRECAUTIONS

Cleaning:

Clean all units with a soft cloth and gentle cleaner. Do not spray cleaner directly on unit. Do not use an abrasive cleaner or cloth.

Door stations are water resistant.

Trouble:

When this station gets out of commission, reboot this station by pressing the reset button.

SPECIFICATIONS

Power supply DC 24V (from power supply)

Current consumption 200 mA

Communication

Handset: Simultaneous communication

Hands-free: Auto-voice actuation

Ambient temperature 0 - 40°C (+32°F - +104°F)

Dimensions

Screen

255 (W) x 145 (H) x 30 (D) mm

10-1/16" (W) x 5-3/4" (H) x 1-3/16" (D)

7 inch color LCD screen

Mounting

Electrical box

Material

Color

Mass

Wall-mount

3-gang box

Flame resistant ABS resin

White

Approx. 780g (1.72 lbs.)

27

WARRANTY

Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the fi nal decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty. This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, power surge, or to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not cover batteries or damage caused by batteries used in connection with the unit. This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone. This warranty is limited to the standard specifi cations listed in the operation manual. This warranty does not cover any supplementary function of a third party product that is added by users or suppliers. Please note that any damage or other issues caused by failure of function or interconnection with Aiphone products is also not covered by this warranty. Aiphone will not be responsible for any costs incurred involving on site service calls. Aiphone will not provide compensation for any loss or damage incurred by the breakdown or malfunction of its products during use, or for any consequent inconvenience or losses that may result.

The object area of is the EU.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

•

Reorient or relocate the receiving antenna

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Issue Date: Oct. 2014

FK2090 A P1014 AZ 56123

http://www.aiphone.net/

AIPHONE CO., LTD., NAGOYA, JAPAN

Printed in Thailand