Control Panel Description. Chauvet Home Safety Product

Operation

4. Operation

Control Panel

Description

Button Function

<MENU> Exits from the current menu or function

<UP>

Navigates upward through the menu list and increases the numeric value when in a function

Control Options

Legend 412

<DOWN>

Navigates downward through the menu list and decreases the numeric value when in a function

You can set the Legend™ 412 start address in the 001~512 DMX range. This enables control of up to 18 units in the 28 channel ADVANCED personality.

Control Options

Legend 412 VW

Programming

You can set the Legend™ 412 VW start address in the 001~512 DMX range. This enables control of up to 25 units in the 20 channel ADVANCED personality.

Refer to the Menu Map to understand the menu options. The menu map has a Menu Level and a variable number of programming levels for each option.

DMX Personality

• To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will take you to the first programming level for that option.

• To select an option or value within the current programming level, press <UP> or

<DOWN> until the option shows on the display. Press <ENTER> to select. In this case, if there is another programming level, you will see that first option, or you will see the selected value.

• To exit to the previous menu level, press <MENU>.

This setting allows you to choose a particular DMX personality.

1. Go to Chnd and press <ENTER>.

2. Select the desired personality based on the product.

• Legend™ 412:

Select 12Ch (Basic) or 28Ch (Advanced)

• Legend™ 412 VW:

Select 10Ch (Basic) or 20Ch (Advanced)

• See the DMX Values section for the highest starting address you can select for each personality.

• Make sure that the starting addresses on the various products do not overlap due to the new personality setting. See the DMX Values section.

Legend™ 412 Series User Manual Rev. 5 -11-