PENTAX Q10 Digital Camera Operating Manual
Mainos
Mainos
PENTAX RICOH IMAGING CO., LTD.
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX RICOH IMAGING
FRANCE S.A.S.
(European Headquarters)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(HQ - http://www.pentax.eu)
(France - http://www.pentax.fr)
PENTAX RICOH IMAGING
DEUTSCHLAND GmbH
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(http://www.pentax.de)
PENTAX RICOH IMAGING
UK LTD.
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX RICOH IMAGING
AMERICAS CORPORATION
633 17th Street, Suite 2600, Denver, Colorado 80202,
U.S.A.
(http://www.pentaximaging.com)
PENTAX RICOH IMAGING
CANADA INC.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
PENTAX RICOH IMAGING
CHINA CO., LTD.
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032, CHINA
(http://www.pentax.com.cn) http://www.pentax.jp/english
Digital Camera
Operating Manual
• Specifications and external dimensions are subject to change without notice.
58282 Copyright © PENTAX RICOH IMAGING CO., LTD. 2012
R01DTI12 Printed in Philippines
To ensure the best performance from your camera, please read the Operating Manual before using the camera.
Thank you for purchasing this PENTAX Q10 Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions.
Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
Lenses you can use
Lenses that can be used with this camera are Q-mount lenses.
Regarding copyrights
Images taken with the PENTAX Q10 that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the
Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the United States of America and other countries.
Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc., registered in the U.S. and other countries.
Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
SDXC Logo is a trademark of SD-3C, LLC.
This product includes DNG technology under license by Adobe Systems Incorporated.
The DNG logo is either a registered trademark or trademark of Adobe Systems
Incorporated in the United States and/or other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.
All other brands or product names are trademarks or registered trademarks of their respective companies.
This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not
PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved. PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.
This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
To users of this camera
• Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used for the monitor is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
• There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual ones.
• In this manual, SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards are referred to as SD Memory Cards.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a
Macintosh hereafter.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its accessories.
1
For Using Your Camera Safely
We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.
Warning
Caution
This symbol indicates that ignoring this item could cause serious personal injuries.
This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.
About the Camera
Warning
• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.
• Do not aim the camera at the sun or other strong light sources when taking pictures or leave the camera sitting in direct sunlight with the lens cap off. Doing so may cause the camera to malfunction or cause a fire.
• Do not look at the sun or other strong light sources through the lens. Doing so may lead to a loss of eyesight or cause vision to be impaired.
2
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest
PENTAX Service Center. Continued use can cause a fire or electrical shock.
Caution
• Do not place your finger over the flash when discharging the flash. You may burn yourself.
• Do not cover the flash with clothing when discharging the flash. Discoloration may occur.
• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.
• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About the Battery Charger and AC Adapter
Warning
• Always use the battery charger and AC adapter exclusively developed for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 - 240V AC.
• Do not disassemble or modify the product. This can cause a fire or electrical shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult a PENTAX Service Center.
Continued use can cause a fire or electrical shock.
• If water should happen to get inside the product, consult a PENTAX Service Center.
Continued use can cause a fire or electrical shock.
• If you see a lightning flash or hear thunder during use of the battery charger or AC adapter, unplug the power plug and discontinue use. Continued use can cause damage to the product, fire or electrical shock.
• Wipe off the power plug if it should become covered with dust. Accumulated dust may cause a fire.
• To reduce the risk of hazards, use only CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
Caution
• Do not place or drop heavy objects on or forcefully bend the AC plug cord. Doing so may damage the cord. Should the AC plug cord be damaged, consult a PENTAX
Service Center.
• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.
• Do not handle the power plug with wet hands. This can cause an electric shock.
• Do not drop the product, or subject it to violent impact. This can cause the product to breakdown.
• Do not use the battery charger D-BC68P to charge batteries other than the rechargeable lithium-ion battery D-LI68. Attempting to charge other types of batteries may cause an explosion or heating, or may damage the battery charger.
3
About the Rechargeable Lithium-ion Battery
Warning
• If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.
Caution
• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.
• If any leakage from the battery should come in contact with skin or clothing, it may cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI68 Battery Usage:
USE SPECIFIED CHARGER ONLY.
- DO NOT INCINERATE.
- DO NOT DISASSEMBLE.
- DO NOT SHORT CIRCUIT.
- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)
Keep the Camera and its Accessories out of the Reach of Small Children
Warning
• Do not place the camera and its accessories within the reach of small children.
1. If the product falls or is operated accidentally, it may cause serious personal injuries.
2. Wrapping the strap around a neck may cause suffocation.
3. To avoid the risk of a small accessory such as the battery or SD Memory Cards from being swallowed by mistake, keep them out of the reach of small children.
Seek medical attention immediately if an accessory is accidentally swallowed.
4
Care to be Taken During Handling
Before Using Your Camera
• When traveling, take the Worldwide Service Network listing that is included in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD Memory Card), etc.
About the Battery and Charger
• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.
• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.
• Charging the battery a day before use or on the day of use is recommended.
• The AC plug cord provided with this camera is developed exclusively for the battery charger D-BC68P. Do not use it with other devices.
Precautions on Carrying and Using Your Camera
• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.
• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.
• The temperature range for camera use is 0°C to 40°C (32°F to 104°F).
• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.
• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.
• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after temperatures of the camera and surroundings are equalized.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt. These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Do not press the monitor with excessive force. This could cause it to break or malfunction.
• Be careful not to overtighten the screw in the tripod socket when using a tripod.
Cleaning Your Camera
• Do not clean the camera with organic solvents such as thinner, alcohol, or benzine.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.
• Please contact a PENTAX Service Center for professional cleaning of the CMOS sensor. (This will involve a fee.)
• Periodic inspections are recommended every one to two years to maintain high performance.
Storing Your Camera
• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera. Remove the camera from its case and store it in a dry and well-ventilated place.
• Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.
Other Precautions
• The SD Memory Card is equipped with a writeprotect switch. Setting the switch to LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or computer.
• The SD Memory Card may be hot when removing the card immediately after using the camera.
Write-protect switch
• Do not remove the SD Memory Card or turn off the power while the card is being accessed. This may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.
• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted if
1. the SD Memory Card is mishandled by the user.
2. the SD Memory Card is exposed to static electricity or electrical interference.
3. the SD Memory Card has not been used for a long time.
4. the SD Memory Card or the battery is removed while the card is being accessed.
• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.
• Format new SD Memory Cards. Also format SD Memory Cards previously used with other cameras.
5
6
• Please note that deleting data stored on an SD Memory Card, or formatting an SD
Memory Card does not completely erase the original data. Deleted files can sometimes be recovered using commercially available software. If you are going to discard, give away or sell your SD Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information.
• The data on your SD Memory Card should be managed at your own risk.
Regarding Product Registration
In order to better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or on the PENTAX website.
Refer to p.205 for details. Thank you for your cooperation.
Contents
For Using Your Camera Safely ............................................................ 1
Care to be Taken During Handling ...................................................... 4
Composition of the Operating Manual ............................................... 13
Before Using Your Camera 15
Checking the Contents of the Package ......................................16
Names and Functions of the Working Parts ..............................17
Capture Mode .................................................................................... 18
Playback Mode .................................................................................. 20
How to Change Function Settings ..............................................30
Using the Direct Keys ........................................................................ 30
Using the Control Panel ..................................................................... 31
Using the Menus ................................................................................ 32
Getting Started 35
Attaching the Strap ......................................................................36
Inserting the Battery.....................................................................37
Charging the Battery .......................................................................... 37
Inserting/Removing the Battery.......................................................... 38
Battery Level Indicator ....................................................................... 39
Using the AC Adapter (Optional) ....................................................... 40
Inserting/Removing an SD Memory Card...................................42
Attaching a Lens...........................................................................44
Turning the Camera On and Off ..................................................46
Initial Settings ...............................................................................47
Setting the Display Language ............................................................ 47
Setting the Date and Time ................................................................. 48
7
8
Basic Operations 51
Basic Shooting Operation ...........................................................52
Letting the Camera Choose the Optimal Settings.............................. 52
Using a Zoom Lens............................................................................ 54
Using the Built-in Flash ...............................................................55
Setting the Flash Mode ...................................................................... 55
Shooting with the Flash...................................................................... 57
Reviewing Images ........................................................................59
Playing Back Images ......................................................................... 59
Deleting a Single Image..................................................................... 60
Shooting Functions 61
How to Operate the Shooting Functions....................................62
Direct Keys Setting Items................................................................... 62
Rec. Mode Menu Items...................................................................... 63
Movie Menu Items.............................................................................. 65
Custom Setting Menu Items............................................................... 65
Selecting the Appropriate Capture Mode...................................67
Auto Picture Modes............................................................................ 68
Scene Modes ..................................................................................... 69
Blur Control Mode .............................................................................. 71
Exposure Modes ................................................................................ 72
Setting the Exposure....................................................................73
Setting the Sensitivity......................................................................... 73
Changing the Exposure Mode ........................................................... 74
Adjusting the Exposure ...................................................................... 77
Locking the Exposure Before Shooting (AE Lock)............................. 80
Selecting the Metering Method .......................................................... 82
Reducing Image Noise (Noise Reduction)......................................... 83
Focusing........................................................................................84
Setting the Focus Method .................................................................. 84
Setting the Autofocus Method............................................................ 85
Focusing Using the d/i Button........................................................ 88
Locking the Focus (Focus Lock) ........................................................ 89
Adjusting the Focus Manually (Manual Focus) .................................. 90
Checking the Depth of Field (Preview) .......................................92
Using the Shake Reduction Function to Prevent Camera
Taking Pictures Using the Shake Reduction Function....................... 93
Shooting with Self-timer ..................................................................... 95
Shooting with Remote Control (Optional) .......................................... 96
Taking Pictures Continuously.....................................................99
Continuous Shooting.......................................................................... 99
Interval Shooting .............................................................................. 101
Multi-exposure ................................................................................. 103
Recording Movies.......................................................................105
Changing the Settings for Movie Recording .................................... 105
Recording Movies ............................................................................ 107
Playing Back Movies........................................................................ 111
Editing Movies.................................................................................. 112
Shooting Settings 115
Setting a File Format ..................................................................116
JPEG Recorded Pixels .................................................................... 118
JPEG Quality ................................................................................... 119
Setting the White Balance .........................................................120
Adjusting the White Balance Manually............................................. 122
Adjusting Brightness .................................................................123
Highlight Correction ......................................................................... 123
Shadow Correction .......................................................................... 124
HDR Capture ................................................................................... 125
Setting the Image Finishing Tone .............................................126
Setting Custom Image ..................................................................... 126
Setting the Digital Filter.................................................................... 130
Saving Frequently Used Functions to the Quick Dial....................... 132
Setting the Smart Effect ................................................................... 134
Saving the Camera Settings ............................................................ 136
Setting the Green Button and E-dial Functions.......................138
Setting the Green Button Operation................................................. 138
Setting the E-dial Operation in e Mode .......................................... 140
Setting the Green Button Operation in a Mode .............................. 141
9
10
Setting the Lens Functions .......................................................142
Setting the ND Filter......................................................................... 142
Correcting Lens Distortion ............................................................... 143
Playback Functions 145
Playback Functions Operation..................................................146
Playback Mode Palette Items .......................................................... 146
Playback Menu Items....................................................................... 147
Setting the Playback Display Method.......................................148
Enlarging Images........................................................................149
Displaying Multiple Images .......................................................150
Multi-image Display Screen ............................................................. 150
Displaying Images by Folder............................................................ 151
Displaying Images by Shooting Date (Calendar Display) ................ 152
Joining Multiple Images (Index) ....................................................... 153
Playing Back Images Continuously.................................................. 155
Displaying Rotated Images........................................................157
Deleting Multiple Images ...........................................................158
Deleting Selected Images ................................................................ 158
Deleting a Folder.............................................................................. 159
Deleting All Images .......................................................................... 160
Connecting the Camera to an AV Device .................................161
Connecting the Camera to a Video Input Terminal or HDMI Input
Setting the Video/HDMI Output Format ........................................... 162
Editing Images 165
Changing the Image Size ...........................................................166
Changing the Number of Recorded Pixels (Resize) ........................ 166
Cropping Out Part of the Image (Cropping) ..................................... 167
Processing Images.....................................................................168
Processing Images with Digital Filters ............................................. 168
Editing Out the Unwanted Red-eye Effect ....................................... 173
Developing RAW Images ...........................................................174
Developing One RAW Image........................................................... 174
Developing Multiple RAW Images ................................................... 176
Changing Additional Settings 177
How to Operate the Set-up Menu ..............................................178
Set-up Menu Items........................................................................... 178
Camera Settings .........................................................................180
Setting the Sound Effects, Date and Time, and Display
Setting the Monitor and the Menu Display ....................................... 184
Selecting Settings to Save in the Camera (Memory) ....................... 189
Resetting the Menus ........................................................................ 190
Checking the Camera Version Information ...................................... 191
File Management Settings .........................................................193
Formatting an SD Memory Card ...................................................... 193
Protecting Images from Deletion (Protect)....................................... 194
Changing the Naming System for Folders ....................................... 195
Creating New Folders ...................................................................... 195
Setting the DPOF Settings............................................................... 196
Connecting to a Computer 199
Manipulating Captured Images on a Computer.......................200
Saving Images on a Computer ..................................................201
Setting the USB Connection Mode .................................................. 201
Connecting the Camera and a Computer ........................................ 202
Using the Provided Software.....................................................203
Installing the Software...................................................................... 203
Using the Flash 207
Using the Built-in Flash .............................................................208
Flash Characteristics in Each Exposure Mode ................................ 208
Using the Slow-speed Sync ............................................................. 208
Using the Trailing Curtain Sync ....................................................... 209
Distance and Aperture when Using the Built-in Flash...................... 209
Lens Compatibility with the Built-in Flash ........................................ 210
Using an External Flash (Optional)...........................................211
Using P-TTL Mode........................................................................... 212
Connecting an External Flash with an Extension Cord.................... 213
11
12
Appendix 215
Default Settings ..........................................................................216
Functions Available with Various Lens Combinations...........222
Using a K-Mount Lens ..................................................................... 223
Cleaning the CMOS Sensor .......................................................224
Removing Dust by Shaking the CMOS Sensor (Dust Removal) ..... 224
Error Messages...........................................................................225
Troubleshooting .........................................................................227
Main Specifications ....................................................................230
WARRANTY POLICY ..................................................................242
13
Composition of the Operating Manual
This Operating Manual contains the following chapters.
Explains the provided accessories and the names and functions of various parts.
Explains your first steps from purchasing the camera to taking pictures. Be sure to read this chapter and follow the instructions.
Explains the procedures for taking and playing back pictures.
Explains the shooting-related functions.
Explains the procedures for changing the shooting settings, such as the file format.
Explains the procedures for playing back and deleting images.
Explains the procedures for processing images and developing images taken in RAW format.
8 Changing Additional Settings
Explains the general camera settings and file management settings such as the monitor display settings and the image folder naming system.
Explains how to connect the camera to a computer, and includes installation instructions and a general overview of the provided software.
Explains how to use the built-in flash and external flashes.
Explains troubleshooting and provides various resources.
1
2
3
4
5
6
7
8
9
10
11
14
The symbols used in this Operating Manual are explained below.
1 Indicates reference page number explaining a related operation.
Indicates useful information.
Indicates precautions to take when operating the camera.
In this Operating Manual, the buttons of the fourway controller are referred to in the following way.
1
Before Using Your
Camera
Check the package contents and the names and functions of working parts before use.
Checking the Contents of the Package .............. 16
Names and Functions of the Working Parts ......17
How to Change Function Settings ......................30
16
Checking the Contents of the
Package
The following accessories are packaged with your camera.
Check that all accessories are included.
1
Hot shoe cover F
K
(Installed on camera)
Body mount cover
(Installed on camera)
Strap
O-ST131
Rechargeable lithium-ion battery D-LI68
Battery charger
D-BC68P
AC plug cord
USB cable
I-USB7
Software (CD-ROM)
S-SW131
Operating Manual
(this manual)
Names and Functions of the Working
Parts
17
Speaker
AF assist light/
Self-timer lamp
Strap lug
Remote control receiver
Card cover
CMOS sensor
Hot shoe
Lens mount index
(red dot)
Built-in flash
1
Lens information contacts
Microphone
Remote control receiver
Card access lamp Strap lug
Battery cover
Monitor
Connection cable cover
Tripod socket
HDMI terminal
(Type D)
Terminal cover
PC/AV terminal
18
1
Capture Mode
Here, you can learn which parts are used and how they function when in capture mode.
The factory default setting of each part is explained here, but some parts have multiple functions and work differently depending on the selected setting.
1 3
2
6
7
4
5
8
9
0 a b c d
1 E-dial
Sets the shutter speed, aperture, and exposure
You can change the menu when a menu screen is
You can change the settings when the control panel is
2 Mode dial
Changes Capture mode.
3 Shutter release button
Press to capture images.
4 Quick dial
You can save your preferred shooting settings and then retrieve them easily later on.
5 Lens unlock button
Press to detach a lens. (p.45)
6 Q (Playback) button
Switches to Playback mode.
7 Flash pop-up switch
Slide to pop up the built-in
8 Power switch
Press to turn the camera on
9 mc (EV Compensation) button
Press to set the exposure compensation and aperture
0 d /i (Green/Delete)
button
Press to reset the values being adjusted, or you can assign a function to this
a 4 button
When the control panel or a menu screen is displayed, press this button to confirm the selected item.
b Four-way controller
(2345)
Displays the Sensitivity/White
Balance/Flash Mode/Drive
When the control panel or a menu screen is displayed, use this to move the cursor or change items.
c 3 button
Displays the [A Rec. Mode 1]
menu (p.63). Press this button
while the menu is displayed to return to the previous screen.
d M button
Changes the style of the
display on the monitor. (p.22)
19
20
1
Playback Mode
Here, you can learn which parts are used and how they function when in playback mode.
1 2
3
4
5
6
7
8
9
0
1 E-dial
Use this to enlarge an image
images at the same time
2 Shutter release button
Press halfway to switch to
Capture mode.
3 Q (Playback) button
Switches to Capture mode.
4 Power switch
Press to turn the camera on
5 mc (EV Compensation) button
When the file format of the last captured image is JPEG, and its data still remains in the buffer memory, press this button to save the image in
6 d /i (Green/Delete) button
Press to delete images, or resets the values being
7 4 button
Confirms the setting you selected in the menu or playback screen.
8 Four-way controller
(2345)
Use this to move the cursor or change items in the menu or playback screen.
Press the four-way controller
(3) to display the playback
9 3 button
Displays the [Q Playback 1]
0 M button
Changes the style of the
display on the monitor. (p.25)
21
22
1
Monitor Display
Various information appears on the monitor depending on the status of the camera.
The brightness level and the color of the monitor can be adjusted. (p.187)
Capture Mode
While shooting, the current shooting function settings are displayed on the monitor. You can change the style of the display by pressing the M button.
M
Custom Image
Bright
M M
Standard display
[ 37]
Control panel Monitor off
Standard display
(All items are displayed here for explanatory purposes. The actual display may differ.)
1 2 3 4 5 6 7 8 9
10
11
13
14
15
+1.7
EV
12
17 18 19 20 21
1
2
3
4
22
16
23
5
6
7
8
9
10 Turning the focusing ring in
\
11 Temperature warning
13 Number of shots during
Interval Shooting or Multiexposure
22 Image storage capacity
23 Face detection frame (when
[Autofocus Method] is set to
* Indicator 15 is displayed in white. When the subject is in focus, a green square frame is displayed instead. It turns red when the subject is not in focus. It is not displayed when [Focus Method] is set to \.
* For indicator 23, a main face detection frame is displayed in yellow and other frames are displayed in white when [Autofocus Method] is set to
[Face Detection].
23
24
Control panel
Press the M button in Capture mode to display the control panel and change
A mode
1
3
8
13
4
9
14
18
5 6
10 11
15 16
7
12
19
C mode
1 Function name
2 Setting
3
4
5
6
7
8
9
3
11
1
2
4
15
8 9
17 12
10
18
15 JPEG Recorded Pixels (p.118)/
19
18 Current date and time (p.48)
19 Image storage capacity
• Settings that cannot be changed due to the current camera setup cannot be selected.
• If no operations are made within 30 seconds while the control panel is displayed, the standard display will reappear.
• The control panel for the H (Scene) mode is displayed when the mode dial is set to
• For more information about the Capture mode display, refer to “Setting the
Capture Mode Display Method” (p.185).
Playback Mode
The camera switches the type of information displayed when you press the
M button during playback.
Standard display
Histogram display
Detailed information display
No info. display
Captured image, file format and operation guide indicators are displayed.
Captured image and histogram (Brightness/RGB) are
displayed. Not available during movie playback. (p.26)
Detailed information on how and when the image was
Only the captured image is displayed.
25
M
Standard display
M
Histogram display
M
M
No info. display
±0
±0
±0
±0
Detailed information display
The type of information display that is shown first during playback is the same as that of the last playback in the previous session. If [Playback Info Display] is set to P (Off) in [Memory] of the [A Rec. Mode 3] menu, the [Standard display]
always appears first when the camera is turned on. (p.189)
26
1
Histogram display
The following histograms can be displayed when playing back still pictures. The “Brightness histogram” shows the distribution of brightness and the “RGB histogram” shows the distribution of color intensity. Press the four-way controller (23) to switch between “Brightness histogram” and “RGB histogram”.
1 2 3 4 2 3
5
4 23
23
5
1
6 7 8 9
Brightness histogram
6 7 8 9
RGB histogram
1 Histogram (Brightness)
2 Protect setting
3 Folder number-File number
4 Save RAW data
5 Switch RGB histogram/
Brightness histogram
6 File Format
7
8
9
Shutter speed
Aperture value
Sensitivity
10 Histogram (R)
11 Histogram (G)
12 Histogram (B)
* Indicator 2 appears only for protected images.
* Indicator 4 appears only when the file format of the last captured image is
JPEG, and the image can also be saved in RAW format. (p.59)
10
11
12
If [Bright/Dark Area] of the [Q Playback 1] menu is set to O (On), bright
(overexposed) portions blink red and dark (underexposed) portions blink yellow
(except when in RGB histogram display or Detailed information display).
Detailed information display
(All items are displayed here for explanatory purposes. The actual display may differ.)
Still picture
±0
±0
1
16
12 13
17
22 23 24
30
5
9
2
6
10
7
3
18 19
25
14
8
11
20
15
21
26
31
4
27
28
29
Movie
±0
±0
1 Captured image
2
3
4 Folder number-File number
5
6
7
8
9
10 Flash Exposure Compensation
1
16
12
22 23
13
17
30
5
32
2
14
33
3
8
11
20
15
21
4
27
28
29
31
17 White Balance fine-tuning (p.122)
18 Highlight Correction (p.123)
20 Distortion Correction (p.143)
23 JPEG Recorded Pixels (p.118)/
26 Lens focal length
28 Custom Image setting (p.126)
29 Custom Image parameters (p.127)
30 Shooting date and time
33 Recording time
27
28
1
Using the Histogram
A histogram shows the brightness distribution of an image.
The horizontal axis represents brightness (dark at the left and bright at the right) and the vertical axis represents the number of pixels.
The shape and the distribution of the
(Dark) ←Brightness→ (Bright) histogram before and after shooting
Dark portions Bright portions tell you whether the exposure level and contrast are correct or not, and lets you decide if you need to adjust the exposure and take a picture again.
1
1
When the image is underexposed, the part to the left is cut off
(underexposed portions with no detail) and when the image is overexposed, the part to the right is cut off (overexposed portions with no detail).
This camera can be set so that it displays the Bright/Dark Area warning during Capture or Playback mode.
1
Setting the Playback Display Method (p.148)
1
Setting the Capture Mode Display Method (p.185)
1
Setting the Display for Instant Review (p.186)
Distribution of color intensity is displayed for each color in the RGB histogram.
The right side of the graphs look similar for images that have the white balance adjusted well. If only one color is lopsided to the left, that color is too intense.
1
Setting the White Balance (p.120)
Guide Indicators
The following indicators appear on the monitor to indicate the keys, buttons and e-dial that can be operated at that time.
Example)
2 Four-way controller (2)
3 Four-way controller (3)
4 Four-way controller (4)
5 Four-way controller (5) d/
4 button
E-dial
Shutter release button
3 button
M button
Green/Delete button mc button
• The image on the monitor may differ from the captured image if the brightness of the subject is low or high.
• If any changes occur in the light source during shooting, the image may flicker.
You can cut down on flicker by setting the power frequency in [Flicker
Reduction] of the [R Set-up 1] menu to that used in your region.
• If the camera position is changed rapidly during shooting, the image may not be displayed with the appropriate brightness. Wait for the display to become stable before shooting.
• Noise may appear on the monitor image when used in dark locations.
• The higher the sensitivity, the more noise and color unevenness may occur in the monitor image and/or captured image.
• Images cannot be displayed on the monitor while data is being saved to an
SD Memory Card.
• If you continue shooting for a prolonged period, the internal temperature of the camera may increase, resulting in lower quality images. It is recommended that you turn off the camera when not shooting. To prevent the image quality from degrading, allow enough time for the camera to cool down while shooting with long exposures or recording movies.
29
30
How to Change Function Settings
1
Function settings can be changed using the direct keys, control panel or menus.
This section explains the basic ways to change function settings.
Using the Direct Keys
In Capture mode, you can set Sensitivity, White Balance, Flash Mode and
Drive Mode by pressing the four-way controller (2345). (p.62)
Below, how to set [Flash Mode] is explained as an example.
1
Press the four-way controller (4) in Capture mode.
The Flash Mode setting screen appears.
2
Use the four-way controller (45) to select a flash mode.
3
Press the 4 button.
The camera is ready to take a picture.
MENU OK
Using the Control Panel
While shooting, the current settings can be checked on the monitor, and you can switch to the control panel and change settings.
Below, how to set [JPEG Quality] is explained as an example.
1
Press the M button in
Capture mode.
The control panel appears.
31
2
Use the four-way controller
(2345) to select an item you want to change the setting for.
You cannot select items that cannot be changed as a result of current camera settings.
3
Press the 4 button.
The setup screen of the selected item appears.
Custom Image
Bright
[ 37]
[ 37]
4
Use the four-way controller (45) or e-dial to select a setting value.
MENU OK
32
1
5
Press the 4 button.
The camera returns to the control panel.
Next, set other items.
6
Press the 3 button or the shutter release button halfway.
The camera is ready to take a picture.
You can also change the setting by turning the e-dial after selecting the item you want to change in Step 2. Detailed settings such as parameters can be changed after pressing the 4 button.
Using the Menus
This section explains how to use the following menus: [A Rec. Mode],
[C Movie], [Q Playback], [R Set-up] and [A Custom Setting].
Below, how to set [High-ISO NR] in the [A Rec. Mode 2] menu is explained as an example.
1
Press the 3 button in
Capture mode.
The [A Rec. Mode 1] menu appears on the monitor.
The menus listed below are displayed in the following situations.
When the mode dial is set to C
[C Movie 1] menu
In Playback mode [Q Playback 1] menu
2
Press the four-way controller (5).
Each time the four-way controller ( 5 ) is pressed, the menu will change in the following sequence: [A Rec. Mode 2],
[A Rec. Mode 3], [C Movie 1],
[Q Playback 1] ... [A Rec. Mode 1].
You can also change the menu by turning the e-dial.
1 2 3
Custom Image
Digital Filter
Focus Settings
AE Metering
MENU
3
Use the four-way controller (23) to select an item.
1 2 3
Multi-exposure
Interval Shooting
High-ISO NR
Distortion Correction
MENU
4
Press the four-way controller
(5).
Available settings are displayed in the pop-up menu or submenu.
1 2 3
Multi-exposure
Interval Shooting
Distortion Correction
MENU
5
Use the four-way controller (23) to select a setting.
Press the 3 button to cancel the pop-up menu, or return to the previous screen.
1 2 3
Multi-exposure
Interval Shooting
High-ISO NR
Distortion Correction
MENU
6
Press the 4 button.
The setting is saved.
Press the 3 button if a submenu is displayed.
Next, set other items.
OK
7
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
33
34
1
Even after you press the 3 button and close the menu screen, your settings will not be saved if the camera is turned off improperly (such as by removing the battery while the camera is on).
• You can select whether to display the menu tab selected the last time first, or
to always display the [A Rec. Mode 1] menu first. (p.186)
• Refer to the following pages for details on each menu.
- [A Custom Setting] menu 1p.65
• Some shooting functions can be saved to the quick dial and loaded with the
2
Getting Started
This chapter explains your first steps from purchasing the camera to taking pictures. Be sure to read this and follow the instructions.
Attaching the Strap .............................................. 36
Inserting the Battery ............................................37
Inserting/Removing an SD Memory Card ..........42
Attaching a Lens ..................................................44
Turning the Camera On and Off ..........................46
Initial Settings ....................................................... 47
36
Attaching the Strap
2
1
Pass the end of the strap through the strap lug, then secure it on the inside of the clasp.
2
Attach the other end of the strap in the same manner as described above.
Inserting the Battery
37
Insert the battery into the camera. Use the rechargeable lithium-ion battery
D-LI68 exclusively developed for this camera.
Charging the Battery
When using the battery for the first time, or when the battery has not been used in a long time, or when [Battery depleted] appears, recharge the battery.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6ft (1.8m)”
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
Indicator lamp
Battery charger
2
AC plug cord
3
Face the 2 mark on the battery up, and insert it into the battery charger.
The indicator lamp is lit while charging and turns off when the battery is fully charged.
38
4
When the battery is fully charged, remove the battery from the battery charger.
2
• Do not use the provided Battery Charger D-BC68P to charge batteries other than D-LI68. Charging other batteries may cause damage or heating.
• Replace the battery with a new one in the following cases:
- If the indicator lamp blinks or does not light after the battery is inserted correctly
- If the battery starts to run down more quickly even after being charged (the battery may have reached the end of its service life)
The maximum charging time is approximately 115 minutes (it depends on temperature and remaining battery power). Charge in a location where the temperature is between 0°C and 40°C.
Inserting/Removing the Battery
• Insert the battery correctly. If the battery is inserted incorrectly, it may not be removed. Wipe the electrodes of the battery with a soft dry cloth before inserting.
• Do not open the battery cover or remove the battery while the power is on.
• Be careful as the camera or battery may become hot when the camera is used continuously for a long period of time.
• Remove the battery when you will not use the camera for a long while. The battery may leak and damage the camera if left installed during prolonged periods of non-use. If the removed battery will not be used for six months or longer, charge the battery for about 30 minutes before storing it. Be sure to recharge the battery every six to twelve months.
• Store the battery in a location where the temperature will remain below room temperature. Avoid locations with high temperatures.
• The date and time may be reset if you leave the battery out of the camera for
1
Slide the battery cover in the direction of the arrow, and then
lift it to open (1 →2).
2
1
2
Insert the battery until it locks
into place with the 2 mark facing toward the lens.
To remove the battery, push the battery lock lever in the direction of the arrow (3) with your finger.
3
Close the battery cover, and then slide it in the direction of the
arrow (4 →5).
3
4
5
Battery Level Indicator
You can confirm remaining battery level by checking the display on the monitor.
Monitor Display w (Green) x (Green) y (Yellow)
F (Red)
[Battery depleted]
Battery Level
Battery is full.
Battery is close to full.
Battery is running low.
Battery is almost empty.
The camera turns off after displaying the message.
39
2
40
2
• y or F may appear even when the battery level is sufficient if the camera is used at low temperatures or when performing continuous shooting for a long period of time.
• Battery performance temporarily decreases as the temperature decreases.
When using the camera in cold climates, have extra batteries at hand and keep them warm in your pocket. Battery performance will return to normal when returned to room temperature.
• Have extra batteries ready when traveling overseas, taking pictures in cold climates, or taking a lot of pictures.
Using the AC Adapter (Optional)
We recommend the use of the AC adapter kit K-AC115 (optional) when using the monitor for a long time or when connecting the camera to a computer or AV device.
The AC Adapter Kit K-AC115 includes AC Adapter D-AC115, DC Coupler D-
DC115, and AC plug cord.
1
Make sure that the camera is turned off.
2
Open the battery cover.
Remove the battery if it is inserted in the camera.
3
Pull down the connection cable
cover (1) on the bottom side of the battery chamber, and insert the DC coupler into the battery chamber.
2
1
4
Close the battery cover.
Pull out the connection cable from the connection cable cover section.
5
Connect the DC coupler and the AC adapter.
41
2
6
Connect the AC adapter to the AC plug cord.
7
Plug the AC plug cord into the power outlet.
• Make sure the camera is turned off before connecting or disconnecting the
AC adapter.
• Make sure connections are secure between the terminals. The SD Memory
Card or data may be corrupted if disconnected while the card is being accessed.
• The connection cable will protrude from the connection cable cover on the camera while the AC adapter is in use.
• After removing the DC coupler, return the connection cable cover to its original position.
Be sure to read the manual of the AC adapter kit before using the AC adapter.
42
2
Inserting/Removing an SD Memory
Card
This camera uses a commercially available SD Memory Card, SDHC
Memory Card, or SDXC Memory Card.
Make sure the camera is turned off before inserting or removing the SD
Memory Card.
• Do not remove the SD Memory Card while the card access lamp is lit.
• If the card cover is opened while the power is on, the camera will turn off. Do not open the cover while the camera is in use.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been used on other devices. Refer to “Formatting an SD Memory Card”
(p.193) for details on formatting.
• Use a high-speed memory card when recording movies. If a write speed cannot keep up with a recording speed, the writing may stop during recording.
1
Make sure that the camera is turned off.
2
Slide the card cover in the direction of the arrow, and then
lift it to open (1 →2).
1
2
3
Insert the card all the way with the SD Memory Card label facing toward the monitor.
43
Push the SD Memory Card in once to remove.
4
Close the card cover, and then slide it in the direction of the
arrow (3 →4).
4
3
For details on the approximate number of images that can be recorded on an
SD Memory Card, refer to “Approximate Image Storage Capacity by Size”
2
44
Attaching a Lens
2
Attach a Q-mount lens to the camera’s body.
The steps will be described here using a 01 STANDARD PRIME lens.
• When attaching/removing the lens, choose an environment that is relatively free of dirt and dust.
• Keep the body mount cover on the camera when a lens is not attached.
• Be sure to attach the lens mount cover and lens cap to the lens after removing it.
• Do not insert any fingers into the camera mount or touch the CMOS sensor.
• The camera body and lens mount incorporate lens information contacts. Dirt, dust, or corrosion may damage the electrical system. Please contact a
PENTAX Service Center for professional cleaning.
• We assume no responsibility nor liability for accidents, damages and malfunctions resulting from the use of lenses made by other manufacturers.
1
Make sure that the camera is turned off.
2
Remove the body mount cover
(1) and lens mount cover (2).
Be sure to put the lens down with the lens mount side facing upward to protect the lens mount from damage.
3
Align the lens mount index (red
dots: 3) on the camera and the lens, and secure by turning the lens clockwise until it clicks.
After attaching, turn the lens counterclockwise to check that the lens is locked in place.
3
45
4
Remove the front lens cap by pushing the indicated portions inward.
To remove the lens
Attach the lens cap first, and then turn the lens counterclockwise while pushing the lens unlock button (4).
4
If the lens is removed while the power is on, the monitor will turn off, and the shutter release button will be locked. Do not remove the lens while the power is on.
2
46
Turning the Camera On and Off
2
1
Press the power switch.
The camera will turn on.
Press the power switch again to turn off the camera.
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform any operations within a set period of time (Auto Power Off). By default, the camera is set to turn off automatically after 1 minute of inactivity. You can change the setting
in [Auto Power Off] of the [R Set-up 2] menu. (p.184)
• To turn the camera on in playback mode, press the power switch while pushing the Q button.
Initial Settings
47
The first time the camera is turned on after purchasing, the [ Language/ u] screen appears on the monitor. Follow the procedure below to set the language displayed on the monitor and the current date and time.
If the [Date Adjustment] screen appears, set the date and time by following the procedure
in “Setting the Date and Time” (p.48).
2
MENU
Setting the Display Language
You can choose the language in which the menus, error messages, etc. are displayed from the following: English, French, German, Spanish, Portuguese,
Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish,
Greek, Russian, Korean, Traditional Chinese, Simplified Chinese and Japanese.
1
Use the four-way controller (2345) to select the desired
language, and press the 4 button.
The [Initial Setting] screen appears in the selected language.
Proceed to Step 6 if W (Hometown) does not have to be changed.
MENU
2
Press the four-way controller (3) to move the frame to W,
and press the four-way controller (5).
The [W Hometown] screen appears.
3
Use the four-way controller (45) to select a city.
Turn the e-dial to change the region.
Refer to “List of World Time Cities”
(p.183) for cities that can be selected as a
hometown.
New York
DST
MENU OK
48
2
4
Press the four-way controller (3) to select [DST] (daylight
saving time), and use the four-way controller (45) to
select O or P.
5
Press the 4 button.
The camera returns to the [Initial Setting] screen.
6
Press the four-way controller (3) to select [Settings complete], and
press the 4 button.
The [Date Adjustment] screen appears.
MENU OK
When the hometown and the date and time are not set, the [Initial Setting] screen or
[Date Adjustment] screen will be displayed again the next time the camera is turned on.
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller
(5), and use the four-way
controller (23) to select the date format.
Choose [mm/dd/yy], [dd/mm/yy] or [yy/ mm/dd].
MENU OK
2
Press the four-way controller (5), and use the four-way controller
(23) to select 24h (24-hour display) or 12h (12-hour display).
3
Press the 4 button.
The frame returns to [Date Format].
4
Press the four-way controller (3), and press the four-way
controller (5).
The frame moves to the month if the date format is set to [mm/dd/yy].
5
Use the four-way controller (23) to set the month.
Set the day and year in the same manner.
Next, set the time.
If you select [12h] in Step 2, the camera switches between am and pm depending on the time.
MENU
6
Press the four-way controller (3) to select [Settings complete], and
press the 4 button.
The camera switches to Capture mode and is ready to take a picture.
If you set the date and time from the
MENU menu, the screen will return to the
[R Set-up 1] menu. In this case, press the 3 button.
OK
OK
• When you press the 4 button in Step 6, the seconds value is set to 0. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 0 seconds.
• Pressing the 3 button while setting the date and time cancels the settings made up to that point and switches the camera to Capture mode.
• You can change the language and date and time settings from the menu.
49
2
50
Memo
3
Basic Operations
This chapter explains basic operations for shooting by setting mode dial to n (Auto Picture) to have the camera select the optimum settings based on the subject.
For information about advanced functions and settings for taking pictures, refer to chapter 4 and onward.
Basic Shooting Operation ...................................52
Using the Built-in Flash .......................................55
Reviewing Images ................................................59
52
Basic Shooting Operation
3
Letting the Camera Choose the Optimal
Settings
This camera features various capture modes, focus modes, and drive modes. This section explains how to take pictures by simply pressing the shutter release button.
1
Set the mode dial to n.
The camera will select the optimal capture mode for the subject.
1
Selecting the Appropriate Capture
2
View the subject on the monitor.
A zoom lens can be used to change the size of the subject on the
3
Position the subject inside the
AF frame, and press the shutter release button halfway.
The autofocus system operates.
The AF frame turns green and you will hear a beep when the subject comes into focus.
AF frame
When set to n (Auto Picture) mode, the optimal capture mode is automatically selected from U (Standard), c (Portrait), s (Landscape), b (Macro),
.
(Night Scene Portrait), K (Sunset), d (Blue Sky) or x (Forest).
4
Press the shutter release button fully.
The picture is taken.
This action is referred to as “releasing the shutter” or “release”.
5
Review the captured image on the monitor.
The image appears for 1 second on the monitor shortly after capturing
(Instant Review).
The following operations can be performed during Instant Review.
Available operations d /i button
E-dial mc button
1
Setting the Display for Instant Review (p.186)
• The shutter sound and the beep that sounds when the image is focused can
• You can set the camera so that pressing the d/i button will focus automatically, in the same way as pressing the shutter release button
• You can preview the image on the monitor and check the depth of field before
53
3
54
Using a Zoom Lens
Enlarge the subject (telephoto) or capture a wider area (wide angle) with a zoom lens. Adjust the subject to the desired size and take pictures.
1
Turn the zoom ring to the right or left.
The angle of view changes.
3
The following functions can be set on the camera depending on the lens being used.
- Setting whether to use the ND filter built-in to the lens (p.142).
- Correcting distortion (p.143)
Using the Built-in Flash
55
Use a flash to take pictures in low light or backlit conditions.
The built-in flash is optimum for a subject at a distance from approx. 0.7 m to 5 m. Vignetting (darkening of the corners of the image due to a lack of light) may occur when used at a distance closer than 0.7 m (this distance varies slightly depending on the lens being used and the sensitivity setting.
For details on the built-in flash and instructions on how to take pictures with an
external flash, refer to “Using the Flash” (p.207).
3
Setting the Flash Mode
C i b
D
G
Slow-speed Sync
H
I a
Flash Mode
Auto Flash
Discharge
Auto Flash+Redeye Reduction
Flash On
Flash On+Redeye Reduction
Slow-speed Sync
+Red-eye
Trailing Curtain
Sync
Flash Off
Function
Automatically measures the ambient light and determines whether to use the flash.
Discharges a pre-flash for red-eye reduction before the automatic flash.
Discharges the flash for each picture.
Discharges a pre-flash for red-eye reduction before the main flash.
Sets to a slow shutter speed depending on the brightness. When using this to shoot a portrait with the sunset in the background, both the person and the background are captured beautifully.
Discharges a pre-flash for red-eye reduction before the main flash is discharged with Slow-speed Sync.
Discharges the flash immediately before closing the shutter. Captures moving objects as if they are
leaving a light trail behind them. (p.209)
The flash is deactivated.
56
3
The flash modes that can be selected differ depending on the capture mode.
e b
Capture Mode n /
/u
/c
/a
Selectable Flash Mode
C / i/E/F/a
C / i/E/F/G/H/I/a
C / i/E/F/I/a
*1 Fixed to a in K (Sunset), d (Blue Sky), A (Night Scene), Z (Night Scene HDR), p (HDR), y (Backlight Silhouette), U (Candlelight), n (Stage Lighting) or
E (Museum) mode.
1
Press the four-way controller (4) in Capture mode.
The Flash Mode setting screen appears.
2
Use the four-way controller (45) to select a flash mode, and press
the 4 button.
The camera is ready to take a picture.
MENU OK
Slow-speed Sync and Trailing Curtain Sync slow down the shutter speed. To avoid camera shake, either turn on the Shake Reduction function, or use a tripod.
Compensating Flash Output
You can change the flash output in the range of – 2.0 to +1.0. The following flash compensation values can be set in increments of 1/3 EV or 1/2 EV depending on the lens being used.
Step Interval
1/3 EV
1/2 EV
Flash Compensation Value
–2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0
–2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0
1
Press the four-way controller (3) in Step 2 on p.56.
2
Turn the e-dial.
The flash compensation value is displayed.
Press the d/i button to reset the value to 0.0.
MENU OK
• When the flash output exceeds its maximum amount, the compensation will not be effective even if the compensation value is set to the plus (+) side.
• Compensating to the minus (-) side may have no effect if the subject is too close, the aperture is set to a large opening, or the sensitivity is high.
• The flash output compensation is also effective for external flash units which support P-TTL auto flash mode.
57
3
Shooting with the Flash
1
Select a flash mode.
2
Slide the flash pop-up switch in the direction of the arrow.
The built-in flash pops up.
3
Press the shutter release button halfway.
The flash starts charging.
4
Press the shutter release button fully.
The picture is taken.
58
5
Push down in the direction of the arrow to retract the built-in flash.
3
• The built-in flash discharges even when retracted, which may cause vignetting to occur depending on the lens being used. Vignetting may also occur at other times depending on the shooting conditions.
• Be sure to retract the built-in flash if not planning to use it. Be careful not to get your fingers pinched when retracting the flash.
• If you do not want to let the built-in flash discharge while it is retracted, set
[10. Flash When Retracted] to [Do Not Discharge Flash] in the [A Custom
Setting 2] menu.
• You cannot take pictures while the built-in flash is being charged. If you want
to take pictures while charging the built-in flash, set [11. Release While
Charging] to [On] in the [A Custom Setting 2] menu.
Reviewing Images
59
Playing Back Images
You can play back captured images with the camera.
1
Press the Q button.
The camera enters Playback mode and the most recently captured image (image with the highest file number) is displayed on the monitor. (For movies, only the first frame is displayed on the monitor.)
2
Review the captured image on the monitor.
Available operations
Four-way controller (4)/
E-dial to the left (f)
Four-way controller (5)/
E-dial to the right (y)
M button mc button
Displays the previous image.
Displays the next image.
Switches information display On/Off. (p.25)
Saves the RAW image (only when the data is available).
• When the file format of the last captured image is JPEG, and its data still remains in the buffer memory, you can save the RAW image during Instant
Review or playback.
If the image was shot using any of the following settings, the corresponding image listed is saved.
- u (Blur Control) mode RAW image with Blur Control disabled
- Digital Filter RAW image without a filter effect
- Smart Effect RAW image with [Bright] image finishing tone
You cannot save RAW images during Continuous Shooting, Exposure
Bracketing, Multi-exposure or HDR Capture.
• Refer to “Playback Functions” (p.145) for details on the playback mode
functions.
3
60
3
Deleting a Single Image
You can delete images one by one.
• Deleted images cannot be restored.
• Protected images cannot be deleted. (p.194)
1
Press the Q button, and display the image to delete.
2
Press the d/i button.
The delete confirmation screen appears.
3
Press the four-way controller (2) to select [Delete].
Select a file format to delete for images saved in RAW+ format.
Delete JPEG
Delete RAW
Delete
RAW+JPEG
Deletes only the JPEG image.
Deletes only the RAW image.
Deletes images in both file formats.
4
Press the 4 button.
The image is deleted.
OK
You can delete multiple images at once. Refer to “Deleting Multiple Images”
4
Shooting Functions
This chapter describes the various basic and advanced shooting functions available with this camera.
How to Operate the Shooting Functions ........... 62
Selecting the Appropriate Capture Mode ..........67
Setting the Exposure ........................................... 73
Focusing ...............................................................84
Checking the Depth of Field (Preview) ...............92
Using the Shake Reduction Function to Prevent
Camera Shake ......................................................93
Taking Pictures Continuously ............................99
Recording Movies .............................................. 105
62
How to Operate the Shooting
Functions
You can change capture-related settings using the direct keys, control panel, [A Rec. Mode] menu, [C Movie] menu or [A Custom Setting] menu.
For details on how to use the direct keys and menus, refer to “How to Change
4
Direct Keys Setting Items
Press the four-way controller (2345) in
Capture mode to set the following items.
Key Item
2 Sensitivity
3 White Balance
4 Flash Mode
5 Drive Mode
Function
Sets the ISO sensitivity.
Adjusts the color balance to match the type of the light source illuminating the subject.
Sets the method of flash discharge.
Selects Continuous Shooting, Selftimer, Remote Control or Exposure
Bracketing shooting.
Page
63
Rec. Mode Menu Items
The following settings can be performed in the [A Rec. Mode 1-3] menus.
Press the 3 button in Capture mode to display the [A Rec. Mode 1] menu.
Menu
A 1
Item
Digital Filter
ND Filter
File Format
JPEG Recorded
Pixels
Color Space
Focus Method
Autofocus Method
MF Assist
Focus Peaking
Function
Sets the image finishing tone such as color and contrast before shooting an image.
Applies a digital filter effect when taking pictures.
Sets the horizontal and vertical ratio of images.
Sets the file format.
Sets the recording size of images saved in JPEG format.
Sets the quality of images saved in
JPEG format.
Sets the color space to use.
Selects the autofocus or manual focus mode.
Selects the autofocus method in = mode.
Enlarges the monitor display during manual focus and makes it easier to focus on the subject.
Emphasizes the outline of the subject in focus and makes it easier to check the focus.
Selects the part of the sensor to use for measuring brightness and determining exposure.
Sets whether to use the ND filter built-in to the lens.
Page
4
64
4
Menu
A
A
2
3
Quick Dial
Green Button
Memory
Item
Multi-exposure
Interval Shooting
D-Range Setting
High-ISO NR
Instant Review
Distortion Correction
LCD View Options
Input Focal Length
Function
Enables capturing images with high dynamic range.
Creates a picture by taking multiple exposures and merging them into a single image.
Takes pictures at a set interval from a set time.
Expands the dynamic range and prevents bright and dark areas from occurring.
Sets the Noise Reduction setting when shooting with a high ISO sensitivity.
Reduces distortions occurring due to lens properties.
Assigns functions to the quick dial.
Assigns functions to the d/i button.
Sets the monitor display in Capture mode.
Sets the Instant Review display settings.
Determines which settings to save when the power is turned off.
Activates the Shake Reduction function.
Sets the focal length when using a lens for which focal length information cannot be obtained.
*1 Can be also set through the control panel.
Page
65
Movie Menu Items
The following settings can be performed in the [C Movie 1] menu.
Press the 3 button when the mode dial is set to C to display the [C
Movie 1] menu.
Menu
C 1
Sound
Item
Recorded Pixels
Exposure Setting
Movie SR
Interval Movie
Function
Sets the number of recorded pixels or size of the movie.
Sets whether to record sound together with movies.
Sets whether to set the exposure manually.
Activates the Movie SR function.
Takes still pictures at a set interval from a set time and records it as a single movie file.
*1 Can be also set through the control panel.
Page
4
Custom Setting Menu Items
Set the [A Custom Setting 1-2] menus to fully use the functions of this camera.
Menu
A 1
1. AE-L with AF
Locked
Item
2. Link AE to AF
Point
3. Auto Bracketing
Order
4. Shake Reduction
Options
5. WB When Using
Flash
6. AWB in Tungsten
Light
7. AF Release
Options
Function
Sets whether to lock the exposure value when the focus is locked.
Sets whether to link the exposure and AF point in the focusing area during multisegment metering.
Sets the order for Exposure Bracketing shooting.
Sets whether to use Shake Reduction during standby mode as well.
Sets the white balance setting when using flash.
Sets whether to adjust the tungsten light color tone when the white balance is set to
F (Auto White Balance).
Sets the action priority for when the shutter release button is fully pressed in = mode.
Page
—
66
4
Menu
A 2
Item
8. AF Assist Light
9. AF with Remote
Control
10. Flash When
Retracted
11. Release While
Charging
12. Save Menu
Location
13. Electronic
Shutter
Reset Custom
Functions
Function
Sets whether to use the AF assist light when autofocusing in dark locations.
Sets whether to use autofocus when shooting with remote control.
Sets whether to discharge the built-in flash when retracted.
Sets whether to release the shutter while the built-in flash is charging.
Sets whether to save the last menu tab displayed on the monitor and to display it again the next time the 3 button is pressed.
Sets whether to use the electronic shutter when using a lens that has a lens shutter.
Resets all the settings in the [A Custom
Setting 1-2] menus to the defaults.
Page
Selecting the Appropriate Capture
Mode
This camera features various capture modes, enabling you to take pictures with settings suited for your photographic vision.
In this manual, the capture modes are referred to as follows.
Capture Mode n (Auto Picture) mode
H (Scene) mode u (Blur Control) mode
Exposure modes
(e/b/c/a)
C (Movie) mode
Mode
Automatically selects the optimal capture mode for the subject.
You can choose the capture mode from various scene styles.
Takes pictures while emphasizing a blur effect.
Changes the shutter speed and aperture value.
Records a movie.
Page
1
Turn the mode dial to set the desired capture mode on the mode dial to the dial indicator.
67
4
Dial indicator
The selected capture mode is displayed on the monitor (Guide Display).
Program
Automatic Exposure
68
• Set the guide display time in [Guide Display] of the [R Set-up 1] menu.
• The scene mode selection screen appears when the mode dial is set to H
4
Auto Picture Modes
When set to n (Auto Picture) mode, the camera automatically selects the optimal mode from the following capture modes for the subject.
Mode Characteristics
U Standard This is selected when none of the following modes apply.
c s
Portrait
Landscape
For capturing portraits. Reproduces a healthy and bright skin tone.
For capturing landscape views. Increases color saturation and produces a vivid color image.
b
.
Macro
Night
Scene
Portrait
K Sunset d Blue Sky x Forest
For capturing tiny objects at close focus range like flowers, coins, jewelry, and more.
For capturing images of people in low light conditions, such as dusk or at night.
Even though the flash is used, the camera will use slow shutter speeds so the background areas beyond the flash reach will also appear correctly exposed in the picture (1 Slow-speed
Sync (p.208)). To prevent camera shake, either use the Shake
Reduction function or mount the camera on a tripod.
For capturing sunrises or sunsets in beautiful, vivid color.
For capturing images of blue sky. Produces a more impressive deep blue.
Enhances colors of trees and sunbeams through foliage and produces a vivid color image.
69
Scene Modes
By setting the mode dial to H (Scene), you can choose from the following scene modes.
c s b
Mode
Portrait
Landscape
Macro
Characteristics
For capturing portraits. Reproduces a healthy and bright skin tone.
For capturing landscape views. Increases color saturation and produces a vivid color image.
For capturing tiny objects at close focus range like flowers, coins, jewelry, and more.
For capturing images of fast moving subjects, such as at sporting events.
The drive mode is fixed to g (Continuous Shooting (Hi)).
\
Moving
Object
.
Night Scene
Portrait
For capturing images of people in low light conditions, such as dusk or at night.
Even though the flash is used, the camera will use slow shutter speeds so the background areas beyond the flash reach will also appear correctly exposed
in the picture (Slow-speed Sync (p.208)). To prevent camera shake, either
use the Shake Reduction function or mount the camera on a tripod.
K Sunset For capturing sunrises or sunsets in beautiful, vivid color.
d Blue Sky For capturing images of blue sky. Produces a more impressive deep blue.
A
Z
Night
Scene
Night
Scene
HDR
Used for shooting at night. Use a tripod or flat surface to prevent camera shake blur.
Generates a single HDR image with less noise from 3 images
(-3 EV, Standard, and +3 EV) captured in dim lighting.
The file format is fixed to [JPEG].
l Night Snap For taking snapshots in poorly lit place.
K Food
For capturing images of food. Saturation will be rather high to make it look appetizing.
w
Quick
Macro
For quick capture of tiny objects at close focus range. This mode automatically adds Blur Control.
The file format is fixed to [JPEG].
Z
R p
Pet
Kids
HDR
For capturing moving pets.
The drive mode is fixed to g (Continuous Shooting (Hi)).
For capturing moving kids. Reproduces healthy and bright skin tone.
The drive mode is fixed to g (Continuous Shooting (Hi)).
x Forest
Enhances colors of trees and sunbeams through foliage and produces a vivid color image.
Q Surf & Snow For capturing images of dazzling backgrounds, such as snowy mountains.
Captures 3 images to generate a single HDR image and provides a wider dynamic range.
The file format is fixed to [JPEG].
4
70 y
Mode
Backlight
Silhouette
Characteristics
Produces a silhouette image of subject in backlight condition.
U Candlelight For capturing scenes in candlelight.
n
Stage
Lighting
For capturing moving subjects in poorly lit place.
E Museum For capturing images in places where a flash is prohibited.
The flash mode is fixed to a (Flash Off) in K, d, A, Z, p, y, U, n and E. To prevent camera shake, either set [Shake Reduction] to k (On) or mount the camera on a tripod.
4
Selecting a Scene Mode
1
Set the mode dial to H.
The camera switches to the H mode, and the scene mode selection screen appears.
2
Use the four-way controller
(2345) or e-dial to choose a
scene mode, and press the 4 button.
The camera is ready to take a picture.
MENU OK
• To change the scene mode, press the M button, and select [Scene
Mode] in the control panel.
• When the 3 button is pressed while the mode dial is set to H, the item
[Scene Mode] appears on the [A Rec.
Mode 1] menu. Press the four-way controller (5) to display the Scene Mode selection screen and you can select a scene mode in the same way as described in Step 2.
Image Capture Settings
Focus Settings
MENU
1 2 3
71
Blur Control Mode
Blur Control enables you to create a picture that looks as if it was taken with a wide-open aperture and shallow depth of field, by shooting multiple images with different focus positions and merging them into a single image. This can produce a more noticeable blur effect that was difficult to achieve with conventional compact cameras.
In u mode, images are captured using the following settings:
- Exposure control Open aperture priority
- Sensitivity Fixed to ISO AUTO
- File Format Fixed to JPEG
1
Set the mode dial to u.
The camera switches to u mode.
4
2
Turn the e-dial.
Select the level of blur from three levels.
Check the blur effect in the image by viewing it in Playback mode.
72
4
• Do not move the camera while taking a picture.
• If holding the camera by hand while shooting, set [Shake Reduction] to k (On).
• Blur Control may not work as effectively as expected if a lens other than an
AF lens is used.
• The following functions are not available with Blur Control:
- Continuous Shooting, Remote Continuous Shooting, or Exposure
Bracketing
- Multi-exposure
- HDR Capture
- Smart Effect
- Instant Review
• The blur effect may not turn out as well as expected in the following situations:
- when the contrast is low overall
- with fountains and other objects that change color or shape constantly
- with moving objects
- with small objects
- with objects at the edge of the screen
- with backlit scenes and other similar conditions
- when a special filter is used
- with far-off objects (Shooting at distances that produce portrait images from the chest up is recommended)
Exposure Modes
Use the exposure modes to change the shutter speed and aperture value and take pictures.
e
Mode
Program Automatic
Exposure b c
Shutter Priority
Automatic Exposure
Aperture Priority
Automatic Exposure a Manual Exposure
Characteristics
Automatically sets the shutter speed and aperture value to obtain a proper exposure according to the Program line.
Lets you set the desired shutter speed for expressing subject movement.
Lets you set the desired aperture value for controlling the depth of field.
Lets you set the shutter speed and aperture value to match your photographic vision.
Page
Setting the Exposure
73
Setting the Sensitivity
You can set the sensitivity to suit the brightness of the surroundings.
The sensitivity can be set to [ISO AUTO] or within a sensitivity range equivalent to ISO 100 to 6400 in increments of 1/3 EV. The default setting is [ISO AUTO].
1
Press the four-way controller (2) in Capture mode.
The Sensitivity setting screen appears.
2
Use the four-way controller (23) to select [ISO AUTO] or [ISO].
ISO AUTO
Sets the range to be adjusted automatically.
ISO Sets a fixed value.
MENU
3
Use the e-dial to change the sensitivity value.
4
Press the 4 button.
--
The camera is ready to take a picture.
OK
• When the capture mode is set to Z (Night Scene HDR)/l (Night Snap)/ p (HDR)/n (Stage Lighting) of H (Scene) mode, the sensitivity is fixed to [ISO AUTO] and cannot be changed.
• [ISO AUTO] is not available in a mode. If the mode dial is set to a when the
sensitivity is set to [ISO AUTO], the camera operates in L mode. (p.74)
• The minimum sensitivity is ISO 200 when [Highlight Correction] (p.123) is set
to [On].
• Captured images may show more noise if a higher sensitivity is set. You can
change the setting in [High-ISO NR] of the [A Rec. Mode 2] menu. (p.83)
4
74
4
Changing the Exposure Mode
This camera features the following exposure modes.
The settings available for each exposure mode are as follows.
z : Available #: Restricted ×: Not available
Exposure Mode
Change
Shutter
Speed
Change
Aperture
Value
Change
Sensitivity
EV
Compensation e
Program Automatic
Exposure b
Shutter Priority
Automatic Exposure c
Aperture Priority
Automatic Exposure a Manual Exposure
#
z
×
#
× z z z z z z z z z
×
*1 In [Green Button] of the [A Rec. Mode 3] menu, you can make the setting so that the
shutter speed and/or aperture value can be changed by turning the e-dial. (p.140)
*2 When the sensitivity is set to [ISO AUTO], the camera switches to L (Shutter &
Aperture Priority Automatic Exposure) mode and the sensitivity is automatically set so that a proper exposure is obtained from the set shutter speed and aperture value. When the sensitivity is set to a fixed value, images are captured with the set sensitivity.
1
Set the mode dial to e, b, c or a .
2
Turn the e-dial to adjust the value.
75
5 appears on the monitor next to the value that can be changed.
The following parameters can be changed depending on the selected exposure mode.
e
Item set in [Green Button] of the [A Rec. Mode 3] menu (p.140)
b Shutter speed c
Aperture value a
Shutter speed
3
When set to a mode, press the mc button (1), and then turn
the e-dial (2) to change the aperture value.
2
The exposure compensation value can be adjusted by this operation in e/b/c
1
• A proper exposure may not be obtained with the selected shutter speed and
aperture value when the sensitivity is set to the fixed value (p.73).
• In a mode, the difference from the proper exposure is displayed in a bar graph while the shutter speed or aperture value is adjusted. The exposure value is displayed in red when the difference from the proper exposure becomes ±3.0 EV or larger.
• You can set the function of the d/i button for when the exposure mode is
set to a. Set in [Green Button] of the [A Rec. Mode 3] menu. (p.141)
• Sensitivity values higher than ISO 1600 are not available when the shutter speed is set to 2 sec. or slower in b/a mode.
4
76
Using the Bulb Shooting
This is useful when shooting night scenes and fireworks which require long exposures.
1
Set the mode dial to a.
2
Turn the e-dial to the left (f), and
set the shutter speed to h. h appears after the slowest shutter speed.
4
3
Press the shutter release button.
The shutter remains open as long as the shutter release button is kept pressed.
4
Take your finger off the shutter release button.
Exposure ends.
• Bulb shooting is available only when using a lens that has a lens shutter.
• In Bulb shooting, the following functions are not available.
- Continuous Shooting
- EV Compensation
- Exposure Bracketing
- AE Lock
- Interval Shooting
- Shake Reduction
- HDR Capture
• Bulb shooting ends compulsorily once the exposure time exceeds 32 seconds.
• Use a sturdy tripod to prevent camera shake during Bulb shooting.
• The upper sensitivity limit for Bulb shooting is ISO 1600.
• We recommend using the AC adapter kit (optional) when shooting with a long
exposure setting as the battery drain is high during Bulb shooting. (p.40)
77
Adjusting the Exposure
This allows you to deliberately overexpose (brighten) or underexpose
(darken) your picture.
The compensation value can be set in increments of 1/3 EV or 1/2 EV between -3 and +3 depending on the lens being used.
Step Interval
1/3 EV
1/2 EV
Exposure Setting Value
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0
±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0
1
Press the mc button (1), and
then turn the e-dial (2).
The exposure is adjusted.
2
1
EV bar is displayed on the monitor during adjustment.
4
+1.7
EV
EV bar
Available operations mc button d /i button
Starts/ends selecting the compensation value.
Resets the compensation value.
• EV Compensation is not available when the capture mode is set to a
(Manual Exposure).
• The set compensation value is not canceled by turning the camera off or by switching to another capture mode.
78
Changing the Exposure Automatically when Shooting
(Exposure Bracketing)
You can take three consecutive images at three different exposure levels when the shutter release button is pressed.Three images are saved with each release.
4
Standard exposure Underexposure Overexposure
You can set the bracketing order in [3. Auto Bracketing Order] of the [A
Custom Setting 1] menu.
0 - + Standard ´ Underexposed ´ Overexposed (default setting)
- 0 + Underexposed ´ Standard ´ Overexposed
+ 0 Overexposed ´ Standard ´ Underexposed
0 + Standard ´ Overexposed ´ Underexposed
Exposure Bracketing is not available in the following situations.
- when the capture mode is set to u (Blur Control) mode, or \ (Moving
Object)/Z (Night Scene HDR)/w (Quick Macro)/ Z (Pet)/R (Kids)/ p (HDR) of H (Scene) mode
- when the shutter speed is set to h
- when Interval Shooting, Multi-exposure or HDR Capture is set
1
Press the four-way controller (5) in Capture mode.
The Drive Mode setting screen appears.
2
Use the four-way controller (45) to select l.
79
3
Press the four-way controller
(3), and use the four-way
controller (45) to select l or c .
MENU OK l Exposure
Bracketing
Takes pictures with the shutter release button.
c
Exposure Bracket
+Remote Ctrl
Takes pictures with an optional remote control unit. The remote control operates according to the Remote Control
shooting (p.96) setting. The shutter is immediately
released when set to i (Remote Continuous Shooting).
4
Press the four-way controller (3), and turn the e-dial to set the bracket value.
The bracket value can be set in increments of 1/3 EV or 1/2 EV depending on the lens being used.
Step Interval
1/3 EV
1/2 EV
Bracket Value
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0
±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0
Available operations mc button
´ e-dial
Adjusts the exposure compensation value (when taking only underexposed or overexposed images).
d /i button Resets the compensation value.
5
Press the 4 button.
The camera is ready to take a picture.
• When [Autofocus Method] (p.85) is set to [AF Select (25 Points)], [Select] or
[Spot], the focus position is locked in the first image and is used for subsequent images.
• Switch to a mode other than l or c in the Drive Mode setting screen to cancel Exposure Bracketing. The setting is canceled when the camera is turned off if [Drive Mode] is set to P (Off) in [Memory] of the [A Rec. Mode
• You can combine Exposure Bracketing with the built-in flash or an external flash (P-TTL auto only) to change only the flash output continuously.
4
80
4
Locking the Exposure Before Shooting
(AE Lock)
AE Lock is a function that locks the exposure (brightness) prior to taking a picture. Use this when the subject is too small to obtain a proper exposure or is backlit.
First, assign the AE Lock function to the d/i button.
1
Select [Green Button] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The [Green Button] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select [AE Lock], and
press the 4 button.
One Push File Format
AE Lock
MENU OK
3
Press the 3 button twice.
The AE Lock function is assigned to the d/ i button and the camera is ready to take a picture.
4
Set the exposure, and press the d /i button.
The camera locks the exposure at that instant.
@ is displayed on the monitor while AE
Lock is engaged.
81
• The exposure remains locked as long as the d/i button is kept pressed or the shutter release button is kept pressed halfway.
• You will hear a beep when AE Lock is activated. The beep can be turned off.
• When any of the following operations are performed, AE Lock is canceled.
- the d/i button is pressed again
- the Q button, 3 button, or power switch is pressed
- the mode dial is turned
- the lens is changed
• AE Lock is not available when the shutter speed is set to h.
• The exposure is also locked when the focus is locked. If you do not want to
lock the exposure when the focus is locked, set [1. AE-L with AF Locked] of
the [A Custom Setting 1] menu to [Off].
• When the shutter speed or aperture value is changed while AE Lock is engaged in a (Manual Exposure) mode, the combination of shutter speed and aperture value changes while the exposure remains the same. For example, when the shutter speed is 1/125 sec. and aperture is F4 and these settings are locked, the aperture automatically changes to F8 if the shutter speed is changed to 1/30 sec.
• When using a zoom lens whose maximum aperture varies depending on the focal length, the combination of shutter speed and aperture value changes depending on the zooming position even while AE Lock is engaged.
However, the exposure value does not change and a picture is taken at a brightness level set when AE Lock is activated.
4
82
4
Selecting the Metering Method
Choose the part of the sensor to use for measuring brightness and determining exposure.
L
M
N
Multisegment
Centerweighted
Spot
The sensor meters the brightness in multiple different zones.
(default setting)
Even in backlit locations, this mode automatically determines what level of brightness is in which portion and automatically adjusts exposure.
Metering is weighted at the center of the sensor.
The sensitivity increases at the center and no automatic adjustment is performed even during backlit scenes.
The brightness is measured only within a limited area at the center of the sensor.
You can use this in combination with the AE Lock function (p.80) when
the subject is extremely small and a correct exposure is difficult to obtain.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [AE
Metering], and press the 4 button.
The [AE Metering] screen appears.
3
Use the four-way controller (45) to select a metering method, and
press the 4 button.
The camera returns to the control panel.
AE Metering
Multi-segment
MENU OK
• You can also change the setting from the [A Rec. Mode 1] menu.
• In [2. Link AE to AF Point] of the [A Custom Setting 1] menu, you can link the
exposure and AF point in the focusing area during multi-segment metering.
Off
On
Exposure for multi-segment metering is determined regardless of the AF point. (default setting)
Exposure for multi-segment metering is adjusted according to the AF point.
83
Reducing Image Noise (Noise Reduction)
When shooting with a digital camera, image noise (image roughness or unevenness) becomes noticeable in the following situations.
- when shooting with a long exposure
- when shooting with a high sensitivity setting
- when the temperature of the CMOS sensor is high
You can reduce image noise by using Noise Reduction.
High-ISO NR
Reduces noise at high sensitivity (ISO) settings.
1
Select [High-ISO NR] in the [A Rec. Mode 2] menu, and
press the four-way controller (5).
2
Use the four-way controller (23) to select [Auto], [Low] or [High],
and press the 4 button.
1 2 3
Interval Shooting
D-Range Setting
Distortion Correction
MENU OK
Auto
Low/High
Applies Noise Reduction at optimally calculated levels throughout ISO range. (default setting)
Applies Noise Reduction at constant chosen level throughout ISO range.
3
Press the 3 button.
The camera is ready to take a picture.
The card access lamp blinks and the camera cannot be operated during Noise
Reduction.
4
84
Focusing
4
Setting the Focus Method
You can focus with the following methods.
= Autofocus
The camera automatically focuses on the subject when the shutter release button is pressed halfway.
\ Manual focus Manually adjust the focus.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Focus
Method], and press the 4 button.
The [Focus Method] screen appears.
3
Use the four-way controller (45) to select a focus method, and
press the 4 button.
The camera returns to the control panel.
MENU OK
Refer to “Letting the Camera Choose the Optimal Settings” (p.52) for
information on how to take pictures in = mode.
Refer to “Adjusting the Focus Manually (Manual Focus)” (p.90) for
information on how to take pictures in \ mode.
• You can also change the setting from the [Focus Settings] of the [A Rec.
Mode 1] menu.
• [Focus Method] is fixed to = when the capture mode is set to n (Auto
Picture) or u (Blur Control) mode, or c (Portrait)/ \ (Moving Object)/.
(Night Scene Portrait)/l (Night Snap)/w (Quick Macro)/Z (Pet)/R (Kids)/ n (Stage Lighting) of H (Scene) mode.
• In = mode, when the subject is in a dark location, the AF assist light is used when the shutter release button is pressed halfway. To not use the AF assist
light, set [8. AF Assist Light] to [Off] in the [A Custom Setting 2] menu.
85
Setting the Autofocus Method
You can choose from the following five autofocus methods in = mode.
D
E
F
G
Face
Detection
Tracking
AF Select
(25 Points)
Select
H Spot
Detects and tracks faces of people. The main face detection frame for autofocus and auto exposure is displayed in yellow.
Tracks the subject in focus when the shutter release button is pressed halfway.
The shutter is released by pressing the shutter release button fully even if the subject is not in focus.
Sets the focusing area to the desired area. (default setting)
The sensor is divided into 25 areas (5 horizontal by 5 vertical), and you can select a wider or narrower focusing area by using
25, 9, 5, 3 or just 1 of those 25 areas available. (p.87)
Sets the focusing area by the number of pixels. You can select a setting more detailed than [AF Select (25 Points)].
Sets the focusing area to a limited area at the center.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Autofocus
Method], and press the 4 button.
The [Autofocus Method] screen appears.
4
86
3
Use the four-way controller (45) to select an autofocus method,
and press the 4 button.
The camera returns to the control panel.
4
MENU OK
• You can also change the setting from the [Focus Settings] of the [A Rec.
Mode 1] menu.
• [Autofocus Method] is fixed to D when the capture mode is set to n
(Auto Picture), or c (Portrait)/. (Night Scene Portrait)/ R (Kids) of H
(Scene) mode.
• [Autofocus Method] is fixed to E when the capture mode is set to \
(Moving Object)/l (Night Snap)/Z (Pet)/n (Stage Lighting) of H (Scene) mode.
• In [AF Select (25 Points)], [Select] or [Spot] mode, you can take pictures by fully pressing the shutter release button only when the subject is in focus. To
take pictures when the subject is not in focus, set [7. AF Release Options] to
[Release-priority] in the [A Custom Setting 1] menu.
87
Selecting the Desired Focusing Area
You can set the position and range of the autofocusing area (AF area).
1
Select [AF Select (25 Points)] or [Select] in Step 3 on p.86,
and press the 4 button.
The camera returns to the control panel.
2
Press the 3 button or the shutter release button halfway.
The camera is ready to take a picture.
3
Press the 4 button.
A black rectangle appears on the monitor, and the AF area can be set by changing the position and size of this rectangle.
4
Select the AF area.
4
MENU
Available operations
Four-way controller
(2345)
Changes the position of the AF area.
E-dial to the right (y) Increases the size of the AF area (when [AF Select
(25 Points)] is selected).
E-dial to the left (f) Reduces the size of the AF area (when [AF Select
(25 Points)] is selected).
4 button Returns the AF area to the center.
5
Press the 3 button.
The AF area is set.
The set AF area remains in the memory even if the autofocus method is changed or the camera is turned off.
88
4
Focusing Using the d/i Button
You can set the camera to perform focusing by pressing the d/i button.
Use this setting when activating the autofocus by pressing the shutter release button halfway is not desired.
First, assign the Enable AF function to the d/i button.
1
Select [Green Button] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The [Green Button] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select [Enable AF], and
press the 4 button.
One Push File Format
AE Lock
MENU OK
3
Press the 3 button twice.
Enable AF is assigned to the d/i button and the camera is ready to take a picture.
4
While viewing the subject on the
monitor, press the d/i button.
The autofocus system operates.
• When Enable AF is assigned to the d/i button, the autofocus by pressing the shutter release button halfway is disabled.
• If Enable AF is assigned to the d/i button when the capture mode is set to u (Blur Control) mode or w (Quick Macro) of H (Scene) mode, use the d /i button to make sure before shooting that a subject is in focus. The desired blur effect cannot be achieved if the subject is not in focus.
89
Locking the Focus (Focus Lock)
If the subject is outside of the focusing area, the camera cannot automatically focus on the subject. In this case, focus the camera on the subject in the focusing area, lock the focus at that position (Focus Lock), and then recompose your picture.
1
Set [Focus Method] to =.
Refer to “Setting the Focus Method” (p.84) for details.
2
Set [Autofocus Method] to [AF Select (25 Points)], [Select], or [Spot].
Refer to “Setting the Autofocus Method” (p.85) for details.
3
Frame the desired composition for your picture on the monitor.
4
4
Center the main subject on the monitor and press the shutter release button halfway.
The AF frame turns green when focused.
The focus is locked while the AF frame is green.
5
Recompose the picture while keeping the shutter release button pressed halfway.
Example) The person is out of focus and the background is in focus instead.
90
• Turning the zoom ring with the focus locked may cause the subject to be out of focus.
• You cannot lock the focus when the capture mode is set to \ (Moving Object)/ l (Night Snap)/Z (Pet)/R (Kids)/n (Stage Lighting) of H (Scene) mode.
In such cases, the autofocus continues to focus on the subject until the shutter is released (Continuous Autofocus).
4
Adjusting the Focus Manually (Manual Focus)
Manually adjust the focus.
1
Set [Focus Method] to \.
Refer to “Setting the Focus Method” (p.84) for details.
2
While viewing the monitor, turn the focusing ring.
The shutter can be released by pressing the shutter release button fully even if the subject is not in focus.
Focusing with the Image Enlarged
You can more easily focus on the subject by enlarging the image in the center of the monitor during \ mode.
1
Select [Focus Settings] in the [A Rec. Mode 1] menu, and
press the four-way controller (5).
The [Focus Settings] screen appears.
2
Use the four-way controller (23) to select [MF Assist],
and press the four-way controller (5).
3
Set the magnification to [Off], [x2], or [x4], and press the
4 button.
The magnification can be changed with the e-dial while the image is enlarged.
4
Press the 3 button twice.
MF Assist is set and the camera is ready to take a picture.
5
Turn the focusing ring, or press the 4 button.
The image on the monitor is enlarged.
6
Check that the subject is in focus.
91
4
Available operations
E-dial to the right (y)
E-dial to the left (f)
Enlarges the image (up to 4 times).
Reduces the image (up to 1 times).
Four-way controller (2345) Changes the area to display.
4 button Changes the display area to the center.
If any button other than the four-way controller (2345) is pressed, or if no operations are made within 30 seconds, the camera returns to normal display.
When [Focus Peaking] is set to [On] in [Focus Settings] of the [A Rec. Mode
1] menu, the outline of the subject in focus is emphasized and makes it easier to check the focus. If you switch to = mode after enabling Focus Peaking in
\ mode, Focus Peaking also works in = mode.
92
Checking the Depth of Field (Preview)
4
You can check the depth of field by stopping down the aperture of the lens to the actually set value.
First, assign the Preview function to the d/i button.
1
Select [Green Button] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The [Green Button] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select [Preview], and
press the 4 button.
Green Button
Preview
AE Lock
Enable AF
MENU OK
3
Press the 3 button twice.
The Preview function is assigned to the d/i button and the camera is ready to take a picture.
4
While viewing the subject on the
monitor, press the d/i button.
You can check the depth of field on the monitor while the d/i button is pressed.
5
Take your finger off the d/i button.
Preview is ended and the camera is ready to take a picture.
The Preview function is not available when the aperture of the lens attached cannot be controlled by the camera.
Using the Shake Reduction Function to Prevent Camera Shake
93
Taking Pictures Using the Shake Reduction Function
The Shake Reduction function reduces camera shake that occurs when the shutter release button is pressed.
The Shake Reduction function works effectively when taking pictures in the following situations.
- When taking pictures in dimly lit locations, such as indoors, at night, on cloudy days and in the shade
- When taking telephoto pictures
• The Shake Reduction function does not compensate for blurring caused by subject movement. To take pictures of a moving subject, increase the shutter speed.
• The Shake Reduction function may not fully reduce camera shake when taking close-up shots. In this case, it is recommended to turn off the Shake
Reduction function and use the camera with a tripod.
• The Shake Reduction function will not fully work when shooting with a very slow shutter speed, for example when panning or shooting night scenes. In this case, it is recommended to turn off the Shake Reduction function and use the camera with a tripod.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Shake
Reduction], and press the 4 button.
The [Shake Reduction] screen appears.
3
Use the four-way controller (45)
to select Q or R, and press the
4 button.
The camera returns to the control panel.
Shake Reduction
On
Q Uses Shake Reduction. (default setting)
R Does not use Shake Reduction.
MENU OK
4
94
4
Press the shutter release button halfway.
k appears on the monitor and the
Shake Reduction function is activated.
4
Be sure to turn the Shake Reduction function off when using the camera with a tripod.
• You can also change the setting from the [A Rec. Mode 3] menu.
• [Shake Reduction] is fixed to R in the following situations.
- Self-timer shooting
- Remote Control shooting
- when the shutter speed is set to h
• [Shake Reduction] is fixed to Q when the capture mode is set to Z (Night
Scene HDR) or p (HDR) of H (Scene) mode.
• You can select whether to use the Shake Reduction function only when
taking pictures or during standby mode as well with [4. Shake Reduction
Options] from the [A Custom Setting 1] menu.
• The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the
Shake Reduction function to work stably and properly, and then press the shutter release button gently.
• The Shake Reduction function is available with any PENTAX Q-mount lens compatible with this camera. However, manually set the focal length in cases where the focal length cannot be automatically obtained, such as when a
mount adapter is being used. Refer to “Using a K-Mount Lens” (p.223) for
details.
95
Shooting with Self-timer
g Self-timer (12 sec.)
Z Self-timer (2 sec.)
The shutter is released after about 12 seconds. Use this mode to include the photographer in the picture.
The shutter is released about 2 seconds after the shutter release button is pressed. Use this mode to avoid camera shake when the shutter release button is pressed.
The self-timer shooting is not available when the capture mode is set to
\ (Moving Object)/Z (Pet)/R (Kids) of H (Scene) mode.
1
Mount the camera onto a tripod.
2
Press the four-way controller (5) in Capture mode.
The Drive Mode setting screen appears.
3
Use the four-way controller (45) to select g.
4
Press the four-way controller
(3), use the four-way controller
(45) to select g or Z, and press
the 4 button.
The camera is ready to take a picture.
MENU
5
Press the shutter release button halfway.
The autofocus system operates.
OK
4
96
6
Press the shutter release button fully.
For g, the self-timer lamp starts blinking slowly and then blinks rapidly 2 seconds before the shutter is released. The beep is heard and the rate increases. The shutter will be released about 12 seconds after the shutter release button is pressed fully.
For Z, the shutter will be released about 2 seconds after the shutter release button is pressed.
4
• Select a mode other than g or Z in the Drive Mode setting screen to cancel the self-timer shooting. The setting is canceled when the camera is turned off if [Drive Mode] is set to P (Off) in [Memory] of the [A Rec. Mode 3] menu.
• The Shake Reduction function is automatically turned off when g or Z is set.
• You can set the camera so that the beep does not sound. (p.180)
Shooting with Remote Control (Optional)
The shutter can be released from a distance by using an optional remote control unit.
h i
Remote Control
Remote Control
(3s delay) i
Remote Continuous
Shooting
The shutter is released immediately after the shutter release button on the remote control unit is pressed.
The shutter is released about 3 seconds after the shutter release button on the remote control unit is pressed.
Continuous shooting starts when the shutter release button on the remote control unit is pressed. Continuous shooting ends when the shutter release button on the remote control unit is pressed again.
• The remote control shooting is not available in the following situations.
- when the capture mode is set to \ (Moving Object)/Z (Pet)/R (Kids) of
H (Scene) mode
- when the shutter speed is set to h
- when HDR Capture is set
• i cannot be selected when the capture mode is set to u (Blur Control) mode, or Z (Night Scene HDR)/w (Quick Macro)/p (HDR) of H
(Scene) mode.
1
Mount the camera onto a tripod.
2
Press the four-way controller (5) in Capture mode.
The Drive Mode setting screen appears.
3
Use the four-way controller (45) to select h.
4
Press the four-way controller
(3), use the four-way controller
(45) to select h, i or i, and
press the 4 button.
The self-timer lamp on the front of the camera will blink and the camera is in a stand-by status.
MENU
5
Press the shutter release button halfway.
The autofocus system operates.
6
Point the remote control unit towards the remote control receiver on the front or back of the camera, and press the shutter release button on the remote control unit.
The maximum operating distance of the remote control unit is approximately 4 m from the front of the camera and approximately 5 cm from the back of the camera.
After a picture is taken, the self-timer lamp lights for 2 seconds and then returns to blinking.
4 m
OK
5 cm
97
4
98
4
• By default, you cannot adjust the focus with the remote control unit. Focus on the subject first with the camera before operating with the remote control unit.
When [9. AF with Remote Control] is set to [On] in the [A Custom Setting 2]
menu, you can use the remote control unit to adjust the focus.
• Select a mode other than h, i or i in the Drive Mode setting screen to cancel the remote control shooting. The setting is canceled when the camera is turned off if [Drive Mode] is set to P (Off) in [Memory] of the [A Rec. Mode
• The Shake Reduction function is automatically turned off when h, i or i is set.
• The remote control shooting may not be available in backlit conditions.
• When using the Remote Control Waterproof O-RC1, the autofocus system can be operated with the S button. The { button cannot be used.
• The Remote Control F can send a remote control signal about 30,000 times.
Contact a PENTAX Service Center to replace the battery (this will involve a fee).
Taking Pictures Continuously
99
Continuous Shooting
Pictures can be taken continuously while the shutter release button is kept pressed.
g h
Continuous
Shooting (Hi)
Continuous
Shooting (Lo)
For JPEG images of E/C, up to approximately 5 frames per second can be taken continuously. You can capture up to approximately 5 frames at once.
Not available when [File Format] is set to [RAW] or [RAW+].
For JPEG images of E/C, up to approximately 1.5 frames per second can be taken continuously.
You can capture up to approximately 100 frames at once.
4
• Continuous Shooting is not available in the following situations.
- when the capture mode is set to Z (Night Scene HDR) or p (HDR) of
H (Scene) mode
- when the shutter speed is set to h
- when HDR Capture is set
• You cannot save RAW data for JPEG images during Instant Review or playback when g or h is selected.
• The number of recordable images is reduced when [Aspect Ratio] is set to
K , J, or L instead of I.
1
Press the four-way controller (5) in Capture mode.
The Drive Mode setting screen appears.
2
Use the four-way controller (45) to select g.
3
Press the four-way controller
(3), use the four-way controller
(45) to select g or h, and press
the 4 button.
The camera is ready to take pictures continuously.
MENU OK
100
4
Press the shutter release button halfway.
The autofocus system operates.
5
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully pressed. Take your finger off the shutter release button to stop.
4
• The drive mode is fixed to g when the capture mode is set to \ (Moving
Object)/Z (Pet)/R (Kids) of H (Scene) mode.
• The focus position is locked in the first frame.
• If [File Format] is changed to [RAW] or [RAW+] while g is selected, the shooting mode is temporarily changed to h.
• The shutter cannot be released until charging is complete when using the built-in flash. You can set the camera to enable the shutter release before the
built-in flash is ready in [11. Release While Charging] of the [A Custom
Setting 2] menu.
• Select a mode other than g or h in the Drive Mode setting screen to cancel the continuous shooting. The setting is canceled when the camera is turned off if [Drive Mode] is set to P (Off) in [Memory] of the [A Rec. Mode 3] menu.
101
Interval Shooting
Takes pictures at a set interval from a set time.
The following settings can be performed.
Interval
Number of Shots
Start Interval
Start Time
For taking two or more pictures, set the wait time until the next picture is taken from 1 second to 24 hours.
Set the number of shots to be taken from 1 to 999. When [Start
Interval] is set to [Now], you can select two or more pictures.
Select whether to take the first picture now or at a set time.
Selecting [Now] starts recording immediately. When [Set
Time] is selected, set [Start Time].
Set the time at which to start shooting.
4
• Interval Shooting is not available in the following situations.
- when the capture mode is set to u (Blur Control) or C (Movie) mode, or
Z (Night Scene HDR)/w (Quick Macro)/p (HDR) of H (Scene) mode
- when the shutter speed is set to h
- when Exposure Bracketing, Multi-exposure or Digital Filter is set
• When HDR Capture (p.125) is set, the shooting interval cannot be set to 9
seconds or less.
1
Select [Interval Shooting] in the [A Rec. Mode 2] menu,
and press the four-way controller (5).
The [Interval Shooting] screen appears.
2
Use the four-way controller (23) to select [Interval], and
press the four-way controller (5).
3
Use the four-way controller (45) to select hours, minutes, or seconds, and use the four-way
controller (23) to set the time.
Press the 4 button to finish the setting.
MENU OK
4
Use the four-way controller (23) to select [Number of
Shots], and press the four-way controller (5).
102
4
5
Use the four-way controller (45), and use the four-way
controller (23) to select the number of shots to be taken.
Press the 4 button to finish the setting.
6
Use the four-way controller (23) to select [Start Interval],
and press the four-way controller (5).
7
Use the four-way controller (23) to select [Now] or [Set
Time], and press the 4 button.
If you selected [Now], proceed to Step 10.
8
Use the four-way controller (23) to select [Start Time],
and press the four-way controller (5).
9
Use the four-way controller (45) to select hours or
minutes, and use the four-way controller (23) to set the time.
Press the 4 button to finish the setting.
10
Use the four-way controller (23) to select [Start
Shooting], and press the 4 button.
The camera is ready to take a series of interval pictures.
11
Press the shutter release button halfway.
The autofocus system operates.
The focus during Interval Shooting is locked at this position.
12
Press the shutter release button fully.
When [Start Interval] is set to [Now], the first picture is taken. When set to [Set Time], shooting starts at the set time.
For shooting multiple pictures, pictures are taken at the interval set in
Step 3.
To cancel shooting, press the 3 button.
After the set number of pictures are taken, the camera returns to normal
Capture mode.
103
• Refer to “Interval Movie” (p.109) for information on how to perform interval
shooting in C (Movie) mode.
• If any of the following operations are performed while shooting, the pictures that have been already taken are saved and Interval Shooting is ended.
- when the power switch is pressed
- when the mode dial or quick dial is turned
• 9 (Single Frame Shooting) is used regardless of the current drive mode setting.
• Although each shot taken is displayed with Instant Review, they cannot be magnified, deleted, or saved in RAW format.
• If the Auto Power Off function turns the camera off before starting Interval
Shooting, the camera automatically turns on again when the shooting time approaches.
• When using Interval Shooting, use the AC adapter kit (optional) or install a fully charged battery. If the battery is not sufficiently charged, it may become depleted during Interval Shooting, and cause recording to stop.
• Interval Shooting is canceled when the SD Memory Card has no more available space.
4
Multi-exposure
You can create a picture by taking multiple exposures and merging them into a single image.
• Multi-exposure is not available in the following situations.
- when [File Format] is set to [RAW] or [RAW+]
- when the capture mode is set to u (Blur Control) or C (Movie) mode, or
Z (Night Scene HDR)/w (Quick Macro)/p (HDR) of H (Scene) mode
- when Exposure Bracketing, Interval Shooting, HDR Capture or Digital Filter is set
• Distortion Correction is not available.
1
Select [Multi-exposure] in the [A Rec. Mode 2] menu, and
press the four-way controller (5).
The [Multi-exposure] screen appears.
2
Use the four-way controller (23) to select [Number of
Shots], and press the four-way controller (5).
104
3
Use the four-way controller (23) to select the number of shots,
and press the 4 button.
Select from 2 to 9 shots.
2 times
4
MENU
4
Use the four-way controller (23) to select [Auto EV
Adjustment], and use the four-way controller (45) to
select O or P.
OK
When set to O (On), the exposure is adjusted automatically according to the number of shots.
5
Use the four-way controller (23) to select [Start
Shooting], and press the 4 button.
The camera is ready to take a series of interval pictures.
6
Press the shutter release button halfway.
The autofocus system operates.
7
Press the shutter release button fully.
The composite picture is displayed in Instant Review each time the shutter release button is pressed.
The following operations can be performed during Instant Review.
Available operations d /i button Discards pictures taken up to that point and takes pictures again from the first frame.
3 button Saves pictures taken up to that point and cancels shooting.
When the above operations are performed or after the set number of shots are taken, the screen in Step 3 appears again.
8
Press the 3 button twice.
Multi-exposure is ended.
Recording Movies
105
In this camera, you can record movies with the following format.
• Frame rate
• Sound
• File format
30 fps
Monaural
MPEG-4 AVC/H.264 (File extension: .MOV)
Changing the Settings for Movie Recording
Settings for recording movies can be changed using the [C Movie] menu or the control panel.
Below, how to change the settings from the [C Movie 1] menu is explained as an example.
1
Set the mode dial to C, and press the 3 button.
The [C Movie 1] menu appears.
Press the four-way controller (5) three times if you press the 3 button in any other capture mode.
2
Press the four-way controller
(3), and then press the four-way
controller (5). Use the four-way
controller (23) to select the number of recorded pixels, and
press the 4 button.
Recorded Pixels
Sound
Movie SR
Interval Movie
MENU OK
4 a b
Frame Size
(default setting)
Pixels
1920×1080
1280×720
640×480
Aspect Ratio
K
K c I
When the number of recorded pixels is changed, the amount of recordable time for that setting appears at the top right of the screen.
3
Use the four-way controller (23) to select [Sound], and
press the four-way controller (5).
106
4
Use the four-way controller (23) to select g or Z, and
press the 4 button.
4 g Records sound. (default setting)
Z Does not record sound.
5
Use the four-way controller (23) to select [Exposure
Setting], and press the four-way controller (5).
6
Use the four-way controller (23) to select [Auto] or
[Manual], and press the 4 button.
Auto Takes pictures with auto exposure. (default setting)
Manual
Allows you to set the shutter speed, aperture value, and sensitivity.
7
Use the four-way controller (23) to select [Movie SR],
and press the four-way controller (5).
8
Use the four-way controller (23) to select Q or R, and
press the 4 button.
Q Uses Shake Reduction. (default setting)
R Does not use Shake Reduction.
9
Press the 3 button.
The camera is ready to record a movie.
[Recorded Pixels], [Sound], and [Movie SR] can also be changed using the control panel.
107
Recording Movies
1
Set the mode dial to C.
The movie recording screen appears.
2
View the subject on the monitor.
Adjust the exposure when [Exposure
Setting] is set to [Manual].
Sound Movie SR
Recordable Time
Available operations
E-dial mc button
→ e-dial
Not available (when [Exposure Setting] is set to [Auto])
Adjusts the shutter speed (when [Exposure Setting] is set to
[Manual]).
Adjusts the exposure compensation value (when [Exposure
Setting] is set to [Auto]).
Adjusts the aperture value (when [Exposure Setting] is set to
[Manual]).
d /i button Calls the function set in [Green Button] of the [A Rec. Mode
3] menu (p.138; [Preview] and [One Push File Format] are not
available.).
Resets the exposure setting when [Exposure Setting] is set to
[Manual] (if [Green Button] is assigned to the d/i button).
3
Press the shutter release button halfway.
The autofocus system operates.
When [Focus Method] is set to \, turn the focusing ring until the subject is clearly visible on the focusing screen.
4
108
4
4
Press the shutter release button fully.
Movie recording starts.
A red P displayed at the top right of the screen blinks during movie recording.
The following operations can be performed while recording a movie.
Available operations
4 button d /i button
Performs autofocus.
Locks the exposure (when [AE Lock] is assigned to the d /i button in [Green Button] of the [A Rec. Mode 3] menu ).
Performs autofocus (when [Enable AF] is assigned to the d/i button in [Green Button] of the [A Rec. Mode
3] menu ).
5
Press the shutter release button again.
Movie recording stops.
• When [Sound] is set to g (On), the camera operation sounds are also recorded. When recording a movie, mount the camera onto a tripod and do not operate the camera while recording.
• The flash is not available.
• When recording a movie using any image processing function, such as
Digital Filter, some frames may be omitted from the recorded movie file.
• If the internal temperature of the camera becomes high during movie recording, the recording may be terminated to protect the camera circuitry.
• When recording a movie, regardless of the focus method setting, recording starts when the shutter release button is pressed fully even if the subject is not in focus.
• You can record a movie continuously up to 4 GB or 25 minutes. When the SD
Memory Card is full, recording stops and the movie is saved.
• The screen display in C mode is set according to the [LCD View Options]
setting made in the [A Rec. Mode 3] menu. (p.185) However, the histogram
and Bright/Dark Area warning are not displayed during movie recording.
• If you intend to record movies continuously for a long period, use of the AC
adapter kit (optional) is recommended. (p.40)
• You can also use an optional remote control unit to start recording a movie.
(p.96) Press the four-way controller (5) in C mode to display the screen for
selecting on/off for the use of the remote control, instead of the normal Drive
Mode setting screen. (To stop recording, press the shutter release button of the camera.)
109
Interval Movie
Takes still pictures one by one at a set interval from a set time and records them as a single movie file. (Motion JPEG, file extension: .AVI)
Perform the following settings.
Interval
Recording Time
Start Interval
Start Time
Set the shooting interval to 1 sec., 5 sec., 10 sec., 30 sec.,
1 min., 5 min., 10 min., 30 min., or 1 hour.
Set the time at which to start and stop recording from 5 seconds to 99 hours. The time that can be set varies depending on [Interval].
Select whether to take the first picture now or at a set time.
Selecting [Now] starts recording immediately. When [Set Time] is selected, set [Start Time].
Set the time at which to start shooting.
4
This mode is available only when the mode dial is set to C.
1
Select [Interval Movie] in the [C Movie 1] menu, and press
the four-way controller (5).
The [Interval Movie] screen appears.
2
Use the four-way controller (23) to select [Interval], and
press the four-way controller (5).
3
Use the four-way controller (23) to select the shooting interval,
and press the 4 button.
MENU OK
4
Use the four-way controller (23) to select [Recording
Time], and press the four-way controller (5).
110
4
5
Use the four-way controller (45) to select hours, minutes, or seconds, and use the four-way controller
(23) to set the time.
Press the 4 button to complete the setting.
6
Use the four-way controller (23) to select [Start Interval],
and press the four-way controller (5).
7
Use the four-way controller (23) to select [Now] or [Set
Time], and press the 4 button.
If you selected [Now], proceed to Step 10.
8
Use the four-way controller (23) to select [Start Time],
and press the four-way controller (5).
9
Use the four-way controller (45) to select hours or minutes,
and use the four-way controller (23) to set the time.
Press the 4 button to complete the setting.
10
Use the four-way controller (23) to select [Start
Shooting], and press the 4 button.
The camera is ready to record an interval movie.
11
Press the shutter release button halfway.
The autofocus system operates.
12
Press the shutter release button fully.
When [Start Interval] is set to [Now], a picture is taken immediately,
Instant Review is displayed, and then the monitor turns off.
When the specified number of pictures are taken, [Interval shooting complete] is displayed, and then the camera returns to normal movie recording mode.
• When recording with Interval Movie, use the AC adapter kit (optional) or install a fully charged battery. If the battery is not sufficiently charged, it may become depleted during recording and cause recording of the movie to stop.
• Interval Movie is canceled when the SD Memory Card has no more available space.
111
Playing Back Movies
Recorded movies can be played back in Playback mode in the same manner as saved still pictures.
1
Use the four-way controller (45) to select a movie to play back.
The first frame of the movie is displayed on the monitor.
2
Press the four-way controller
(2).
Movie playback starts.
4
Available operations
Four-way controller (2) Pauses/Resumes playback.
Four-way controller (5) Forwards a frame (when paused).
Press and hold four-way controller (5)
Fast-forwards playback.
Four-way controller (4) Reverses a frame (when paused).
Press and hold four-way controller (4)
Fast-reverses playback.
Four-way controller (3) Stops playback./
Displays the playback mode palette (when
E-dial mc button
Adjusts the volume (6 levels).
Saves the displayed image as a JPEG file (when
When the movie ends, playback stops and the first frame is displayed again.
• You can use the optional AV cable or a commercially available HDMI cable
to play back recorded movies on a TV screen or other AV devices. (p.161)
• QuickTime is required to play back movies transferred to a computer. (p.200)
112
Capturing a Still Picture from a Movie
You can capture a single frame from a movie and save it as a JPEG still picture.
1
Press the four-way controller (2) in Step 2 on p.111.
2
Use the four-way controller (45) to display the frame to save as a still picture.
Frame number/
Total number of frames
4
3
Press the mc button.
The save confirmation screen appears.
4
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The captured image is saved as a new image.
Editing Movies
Movies can be divided and unwanted segments can be deleted.
1
In Playback mode, use the four-way controller (45) to select a movie to edit.
The first frame of the movie is displayed on the monitor.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select [ (Movie
Editing), and press the 4 button.
The movie editing screen appears.
4
Select point(s) where you want to divide the movie.
The frame at the dividing point is displayed at the top of the screen.
Up to four points can be selected to divide the original movie into five segments.
MENU
Available operations
Four-way controller (2) Plays back/Pauses a movie.
Four-way controller (5) Forwards a frame (when paused).
Press and hold four-way controller (5)
Fast-forwards playback.
Four-way controller (4) Reverses a frame (when paused).
Press and hold four-way controller (4)
Fast-reverses playback.
E-dial mc button
Adjusts the volume (6 levels).
Confirms/cancels a dividing point.
Proceed to Step 8 if you do not delete any segment(s).
5
Press the d/i button.
The screen to select segment(s) to delete is displayed.
6
Use the four-way controller (45) to move the selection frame, and
press the 4 button.
The segment(s) to delete are specified.
Multiple segments can be deleted at once.
Press the 4 button again to cancel the selection.
MENU
7
Press the 3 button.
The screen that was displayed in Step 4 appears again.
8
Press the 4 button.
The save confirmation screen appears.
OK
OK
113
4
114
9
Use the four-way controller (23) to select [Save as], and press the
4 button.
The movie is divided at the specified points and the unwanted segments are deleted from it. Then, the divided movie is saved as separate files and displayed on the screen.
MENU
Saves divided movie as separate files
OK
4
• Select dividing points in chronological order from the beginning of the movie.
When canceling the selected dividing points, cancel each of them in reverse order (from the end of the movie to the beginning). In an order other than specified, you can neither select frames as a dividing point nor cancel the selections of the dividing points. You cannot, for example, select the frames prior to the last selected frame as a dividing point while selecting a dividing point.
• Movies with a short recording time cannot be divided.
5
Shooting Settings
This chapter describes image file formats and camera operating settings in capture mode.
Setting a File Format .......................................... 116
Setting the White Balance ................................. 120
Adjusting Brightness ......................................... 123
Setting the Image Finishing Tone ..................... 126
Setting the Green Button and E-dial Functions
.............................................................................. 138
Setting the Lens Functions ............................... 142
116
Setting a File Format
5
Set the aspect ratio, file format, number of recorded pixels, quality level, and color space of still pictures.
1
Select [Image Capture Settings] in the [A Rec. Mode 1]
menu, and press the four-way controller (5).
The [Image Capture Settings] screen appears.
2
Use the four-way controller (23) to select [Aspect Ratio], [File
Format], [JPEG Recorded
Pixels], [JPEG Quality] or [Color
Space], and press the four-way
controller (5).
JPEG Recorded Pixels
JPEG Quality
MENU
Refer to p.117 - p.119 for details about the
settings.
3
Use the four-way controller (23) to change the settings,
and press the 4 button.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• The aspect ratio, file format, JPEG recorded pixels, and JPEG quality level can also be changed using the control panel.
• When the file format, JPEG recorded pixels, or JPEG quality level is changed, the number of images that can be recorded for that setting appears on the monitor.
Aspect Ratio
Select the horizontal and vertical ratio of images from K, J, I (default setting) or L. The aspect ratio of the camera monitor is J, so if a different aspect ratio is selected, the monitor display changes to match the set aspect ratio.
The number of recordable images available with continuous shooting is reduced when the aspect ratio is set to K, J, or L instead of I.
117
File Format
You can set the format of image files.
JPEG
RAW
RAW+
Captures images in JPEG format. (default setting)
You can change the number of recorded pixels in [JPEG Recorded
Pixels], and the image quality level in [JPEG Quality].
The RAW format is a CMOS sensor output format saved without processing. RAW files are recorded with the general-purpose DNG
(Digital Negative) format designed by Adobe Systems.
Effects of White Balance, Custom Image and Color Space are not applied to the captured images, but they are saved as actual original information. When you perform the development process by using the
RAW Development function (p.174), you can create JPEG images with
these effects.
Captures images in both RAW and JPEG formats.
When [One Push File Format] is assigned to the d/i button, you can press the d/i button to temporarily change the file format and save
an image in both file formats. (p.139)
• When Digital Filter, HDR Capture or Smart Effect is set, the file format is fixed to [JPEG] and cannot be changed. To change the file format, turn these functions off.
• When the capture mode is set to u (Blur Control) mode or Z (Night Scene
HDR)/w (Quick Macro)/p (HDR) of H (Scene) mode, the image is saved in JPEG format, regardless of the [File Format] setting.
5
118
5
JPEG Recorded Pixels
Sets the recording size of images when [File Format] is set to [JPEG]. The selectable sizes vary according to the [Aspect Ratio] setting.
Aspect Ratio
K
J
I
L
Recorded
Pixels k
P g i
E k f h
N a f i k
P g i
Pixels
4000×2248 (default setting)
3456×1944
2688×1512
1920×1080
4000×2664 (default setting)
3456×2304
2688×1792
1920×1280
4000×3000 (default setting)
3456×2592
2688×2016
1920×1440
2992×2992 (default setting)
2592×2592
2016×2016
1440×1440
• The more pixels there are, the bigger the file size. The file size will also vary according to the [JPEG Quality] setting.
• The quality of a captured image depends on the exposure control, resolution of the printer and a variety of other factors.
JPEG Quality
You can set the image quality level (compression ratio). The default setting is C (Best).
Quality: clearer File size: larger C Best
D Better
E Good Quality: grainier File size: smaller
119
Color Space
You can select a color space to use.
sRGB
AdobeRGB
Mainly used for devices such as a computer. (default setting)
Covers a wider range of color than sRGB and is used for commercial uses such as industrial printing.
The file naming system changes depending on the color space setting as shown below.
For sRGB: IMGPxxxx.JPG
For AdobeRGB: _IGPxxxx.JPG
“xxxx” indicates the file number and is displayed as a four-digit sequential number.
5
120
Setting the White Balance
5
Adjusts the color of an image based on ambient light conditions so that white objects appear white.
Item
F Auto
Setting
Automatically adjusts the white balance.
(default setting)
Color
Temperature
Approx. 4,000 to
8,000K
G Daylight For use when taking pictures in sunlight.
Approx. 5,200K
H Shade
For use when taking pictures in the shade.
It reduces the bluish color tones in a picture.
Approx. 8,000K
^ Cloudy For use when taking pictures on cloudy days. Approx. 6,000K
J
I
Fluorescent
Light
Tungsten
For use when taking pictures under fluorescent lighting. Select the type of fluorescent light.
D
N
Fluorescent - Daylight Color
Fluorescent - Daylight White
W Fluorescent - Cool White
L Fluorescent - Warm White
For use when taking pictures under light bulbs or other tungsten light. It reduces the reddish color tones in a picture.
Approx. 6,500K
Approx. 5,000K
Approx. 4,200K
Approx. 3,000K
Approx. 2,850K
L f
K
Flash
Manual
For use when taking pictures using the built-in flash.
Use this to keep and strengthen the color tone of the light source in the image.
Use this to manually adjust the white balance according to the lighting when taking pictures.
Approx. 5,400K
—
—
*1 The color temperatures (K) shown above are all estimates. These do not indicate precise colors.
*2 CTE = Color Temperature Enhancement
The white balance is fixed to F when the capture mode is set to n
(Auto Picture) or H (Scene) mode.
1
Press the four-way controller (3) in Capture mode.
The White Balance setting screen appears.
The last image taken after the camera was turned on is displayed in the background.
OK
121
2
Use the four-way controller (45) to select the white balance.
When J (Fluorescent Light) is selected, press the four-way controller (3) and use the four-way controller (45) to select D,
N, W, or L.
Proceed to Step 6 if you do not need to change the parameters.
3
Press the mc button.
The fine-tuning screen appears.
4
Fine-tune the white balance.
MENU
G3 A2
SHUTTER
MENU
Adjust
Cancel OK
Available operations
Four-way controller
(23)
Four-way controller
(45) d /i button
Adjusts the tone of the colors between green (G) and magenta (M).
Adjusts the tone of the colors between blue (B) and amber (A).
Resets the adjustment value.
5
Press the 4 button.
The screen that was displayed in Step 2 appears again.
6
Press the 4 button.
The camera is ready to take a picture.
Because the light source changes when a flash discharges, you can set the white balance for when the flash discharges. Select [Auto White Balance],
[Unchanged] or [Flash] in [5. WB When Using Flash] of the [A Custom Setting
1] menu.
5
122
Adjusting the White Balance Manually
You can adjust the white balance depending on the light source when taking pictures.
1
5
SHUTTER
MENU
Adjust
Cancel
OK
2
Under the light you wish to measure the white balance of, fully display a white sheet of paper on the monitor, or select a white area as the subject.
3
Press the shutter release button fully.
Set [Focus Method] to \ when the shutter cannot be released.
Adjust the white balance as necessary.
The message [The operation could not be completed correctly] appears when measuring is unsuccessful. Press the 4 button while displayed to remeasure the white balance.
4
Press the 4 button.
The camera is ready to take a picture.
• No image is recorded when the shutter release button is pressed to adjust the white balance.
• If a picture is extremely overexposed or underexposed, the white balance may not be adjusted. In this case, adjust exposure to the correct exposure before adjusting the white balance.
Adjusting Brightness
123
Adjusts the brightness and reduces the occurrence of overexposed and underexposed areas.
Highlight Correction
Expands the dynamic range and enables a wider range of tones by the
CMOS sensor and reduces the occurrence of overexposed areas.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Highlight
Correction], and press the 4 button.
The [Highlight Correction] screen appears.
3
Use the four-way controller (45) to select [Auto], [On] or [Off], and
press the 4 button.
Highlight Correction
Auto
The camera returns to the control panel.
5
MENU OK
• When [Highlight Correction] is set to [On], the minimum sensitivity is set to
ISO 200.
• The selectable items are limited in the following capture modes:
- l (Night Snap) or n (Stage Lighting) of H (Scene) mode
- a (Manual Exposure) mode
Fixed to [On]
[Auto] not available
124
5
Shadow Correction
Expands the dynamic range and enables a wider range of tones by the
CMOS sensor and reduces the occurrence of underexposed areas.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Shadow
Correction], and press the 4 button.
The [Shadow Correction] screen appears.
3
Use the four-way controller (45) to select [Auto], [On] or [Off], and
press the 4 button.
The camera returns to the control panel.
MENU OK
You can also set Highlight Correction and Shadow Correction in [D-Range
Setting] of the [A Rec. Mode 2] menu.
125
HDR Capture
Enables capturing images with high dynamic range. Takes three images
(-3 EV underexposed, standard (proper exposure) and +3 EV overexposed) to create a single composite image with them.
• HDR Capture is not available in the following situations.
- when [File Format] is set to [RAW] or [RAW+]
- when the shutter speed is set to h
- when the capture mode is set to u (Blur Control), C (Movie) mode, or w (Quick Macro) of H (Scene) mode
• When HDR Capture is set, the following functions are not available.
- Flash discharge
- Continuous Shooting, Remote Continuous Shooting, or Exposure Bracketing
- Multi-exposure or Digital Filter
• During HDR Capture, shutter speeds of 1/8 sec. or slower are not available.
• During HDR Capture, multiple images are combined together to create a single image, so it will take time to save the composite image.
• Make sure to hold the camera firmly so that it does not move while the three images are taken. If there is a great difference between the three images due to camera movement, the message [The operation could not be completed correctly] appears, and the composite image will not be saved.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [HDR
Capture], and press the 4 button.
The [HDR Capture] screen appears.
3
Use the four-way controller (45) to select [Off], [Auto], [HDR 1] or
[HDR 2], and press the 4 button.
The camera returns to the control panel.
MENU OK
• [HDR Capture] is fixed to [Auto] when the capture mode is set to Z (Night
Scene HDR) or p (HDR) of H (Scene) mode.
• You can also change the setting from the [A Rec. Mode 2] menu.
5
126
Setting the Image Finishing Tone
Take pictures with settings to suit for your creative photographic vision.
5
Setting Custom Image
Select the desired picture style from the following modes and enjoy taking pictures with a creative finishing tone.
Image Tone
Bright
Natural
Portrait
Landscape
Vibrant
Radiant
Muted
Bleach Bypass
Reversal Film
Monochrome
Cross
Processing
Image
Saturation, hue, and contrast will be rather high to create a bright sharp image. (default setting)
Creates a natural look that is close to the actual color.
Reproduces a healthy and bright skin tone.
Increases color saturation, highlights shapes, and produces a vivid color image
Changes the color slightly to create an antique look.
Emphasizes glossiness to produce a spectacular finish.
Reduces the saturation to create a soft look.
Reduces the saturation and increases the contrast to create the look of an old picture.
Creates a picture with strong image contrast as if taken with reversal film.
Takes pictures using a B&W color filter.
Intentionally changes the hue and contrast. The outcome varies each time a picture is taken.
Custom Image is not available when the capture mode is set to n (Auto
Picture) or H (Scene) mode.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four way controller (2345) to select [Custom
Image], and press the 4 button.
The Custom Image setting screen appears.
The last image taken after the camera was turned on is displayed in the background.
3
Use the four-way controller
(2345) to select an image finishing tone.
You can check the selected Custom
Image effect with the background image.
Proceed to Step 8 if you do not need to change the parameters.
4
Press the mc button.
The screen to select a parameter appears.
5
Use the four-way controller (23) to choose a parameter you want to change.
MENU OK
127
5
I
MENU OK
The following parameters can be changed according to the selected image finishing tone.
Image Tone
Bright/Natural/Portrait/
Landscape/Vibrant/Radiant
Parameter
Saturation: -4 to +4
Hue: -4 to +4
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
128
5
Image Tone
Muted/Bleach Bypass
Reversal Film
Monochrome
Parameter
Saturation: -4 to +4
Toning: Off/Green/Yellow/Orange/Red/
Magenta/Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
Filter Effect: None/Green/Yellow/Orange/
Red/Magenta/Blue/Cyan/Infrared Filter
Toning: Off/Green/Yellow/Orange/Red/
Magenta/Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
Random/Preset 1-3/Favorite 1-3 *1 Cross Processing
*1 For [Favorite 1-3], you are required to save the settings of a cross processed image
as a favorite in advance through the playback mode palette. (p.129)
6
Use the four-way controller (45) to change the settings.
You can check the saturation and hue with the radar chart.
Available operations
E-dial d /i button
Switches between [Sharpness] and [Fine Sharpness].
(Not available in C mode.)
Resets the set value.
7
Press the 4 button.
The screen that was displayed in Step 3 appears again.
8
Press the 4 button.
The camera returns to the control panel.
You can also change the settings from the [A Rec. Mode 1] menu.
129
Saving the Cross Processing Settings of a Captured Image
The outcome of cross processing varies each time a picture is taken. If you take a cross processed image that you like, you can save the Cross
Processing settings used in that image. A total of three Cross Processing settings can be saved.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select s (Save
Cross Processing), and press the 4 button.
The camera will search for cross processed images starting from the most recent image taken. (An hourglass icon is displayed while searching.) When a cross processed image is found, the screen to save the settings appears.
If there are no cross processed images, the message [No cross processed image] appears.
3
Use the e-dial to select a cross processed image.
Processing settings
5
MENU OK
4
Use the four-way controller (23) to select a number, and
press the 4 button.
The settings of the selected image are saved to [Favorite 1 - 3] and the last displayed image is displayed again.
130
5
Setting the Digital Filter
You can apply a filter effect when taking pictures. The following filters can be selected.
Filter Name
Toy Camera
High Contrast
Shading
Slim
HDR
Invert Color
Extract Color
Color
Water Color
Posterization
Fish-eye
For taking pictures that look as if taken with a toy camera.
Effect Parameter
Shading Level: Low/Medium/High
Blur: Low/Medium/High
Tone Break: Red/Green/Blue/
Yellow
For taking pictures with high contrasts.
For taking pictures with the selected color filter.
Intensity: 1 to 5
For taking pictures with the background darkened.
For extracting two specific colors and making the rest of the image black and white.
Shading Type: 6 types
Shading Level: -3 to +3
Changes the horizontal and vertical ratio of images.
Creates an image that looks like a high dynamic range image.
Inverts the colors in the image.
-8 to +8
Low/Medium/High
OFF/ON
Extracted Color 1: Red/Magenta/
Blue/Cyan/Green/Yellow
Extractable Range of Color 1: 1 to 5
Extracted Color 2: OFF/Red/
Magenta/Blue/Cyan/Green/Yellow
Extractable Range of Color 2: 1 to 5
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Density: Light/Medium/Dark
For taking a picture that looks as though it was painted.
Lessens the tone of the image to create an image that looks as though it was hand-drawn.
For taking pictures that look as if taken with a fisheye lens.
Intensity: Low/Medium/High
Saturation: OFF/Low/Medium/High
Intensity: 1 to 5
Low/Medium/High
131
• Digital Filter is not available in the following situations.
- when the capture mode is set to Z (Night Scene HDR)/p (HDR) of
H (Scene) mode
- when [File Format] is set to [RAW] or [RAW+]
• When Digital Filter is set, Multi-exposure and HDR Capture are not available.
• Depending on the filter used, it may take longer to save images.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Digital
Filter], and press the 4 button.
The screen to select a filter appears.
The last image taken after the camera was turned on is displayed in the background.
3
Use the four-way controller
(2345) to select a filter.
You can check the selected filter effect with the background image.
Proceed to Step 7 if you do not need to change the parameters.
4
Press the mc button.
The parameter setting screen appears.
5
Use the four-way controller (23) to select a parameter, and the
four-way controller (45) to adjust the parameter’s value.
MENU OK
5
MENU
6
Press the 4 button.
The screen that was displayed in Step 3 appears again.
OK
132
7
Press the 4 button.
The camera returns to the control panel.
• You can also change the settings from the [A Rec. Mode 1] menu.
• Select [Not use any filters] in Step 3 to finish shooting with a digital filter.
• JPEG and RAW images can be processed with digital filters in Playback
5
Saving Frequently Used Functions to the
Quick Dial
You can save frequently used functions to the quick dial to easily load and use the desired settings when taking pictures.
Save up to four settings to each of the following functions.
You can save only one of the above functions. You cannot assign multiple functions at the same time.
1
Select [Quick Dial] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The screen for setting the quick dial function appears.
2
Use the four-way controller (45) to select the function to save.
MENU OK
3
Use the four-way controller (23) to select the position
1-4 of the quick dial to which to save the setting.
4
Use the four-way controller (45) to select the desired setting.
To make detailed settings for Smart Effect, press the mc button.
5
Repeat Steps 3 and 4.
Save the settings to the other positions in the same way.
6
Press the 4 button.
The setting assigned to each position is saved.
7
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
133
5
Loading Settings for Taking Pictures
You can take pictures with the settings saved in the quick dial, and while using the quick dial, these settings have priority over the settings such as ones made through the menus.
1
In Capture mode, turn the quick dial to select the position 1 to 4.
The setting saved in the selected position is loaded, and the camera is ready to take a picture.
2
Take a picture.
3
After taking pictures, return the quick dial to the position
0.
The camera returns to the original setting.
You cannot use the menus to change the settings when taking pictures with the quick dial. To change the settings of the quick dial, save other settings again.
134
5
Setting the Smart Effect
You can set and capture images with a variety of effects.
Select from the following types of effects.
• Brilliant Color
• Unicolor Bold
• Vintage Color
• Cross Processing
• Warm Fade
• Tone Expansion
• Bold Monochrome
• Water Color
• Vibrant Color Enhance
1
Select [Smart Effect] in Step 2 on p.132.
2
Use the four-way controller (23) to select the position
1-4 of the quick dial to which to save the desired effect.
3
Press the mc button.
The screen for making detailed Smart Effect setting screen appears.
4
Use the four-way controller
(2345) to choose an effect.
MENU
5
Press the 4 button.
The camera returns to the screen for setting the quick dial function.
6
Repeat Steps 2 to 5.
OK
7
Press the 4 button.
The selected effects are saved to the position 1-4 of the quick dial.
8
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
135
Shooting with Smart Effect
• The file format is fixed to [JPEG].
• Multi-exposure, HDR Capture, Custom Image and Digital Filter are not available.
1
Turn the quick dial to select the position 1 to 4.
The effect saved in the selected position is loaded, and the camera is ready to take a picture.
2
Press the four-way controller (3) to change the parameters.
The parameter setting screen appears.
3
Use the four-way controller (45) to change the parameters.
5
MENU OK
The following parameters can be changed depending on the selected effect.
Effect
Brilliant Color/Cross Processing/
Warm Fade/Tone Expansion/Bold
Monochrome/Water Color/Vibrant
Color Enhance
Parameter
Intensity: 2 levels
Unicolor Bold
Vintage Color
4
Press the 4 button.
The camera is ready to take a picture.
Extracted Color: Red/Magenta/Blue/
Cyan/Green/Yellow
Type: 3 types
136
Saving the Camera Settings
You can save the current camera settings and retrieve them later on by the quick dial operation.
1
Set necessary settings.
2
Select from USER 1 to 3 in Step 4
5 3
Press the d/i button.
The save confirmation screen appears.
4
Use the four-way controller (23) to select [Save Settings], and
press the 4 button.
MENU
MENU
5
Use the four-way controller (23) to select [Save], and press the
4 button.
The settings are saved, and the screen that was displayed in Step 2 appears again.
MENU
Save
Cancel
OK
OK
OK
137
Saving a Thumbnail Image to the USER Mode
If you take an image that you like, you can save the image along with the settings used in that image to make it even easier to replicate the look of the image.
1
Select from USER 1 to 3 to which settings were saved on
the screen in Step 2 on p.136.
2
Press the d/i button.
The save confirmation screen appears.
3
Use the four-way controller (23) to select [Save
Thumbnail], and press the 4 button.
The image selection screen appears.
4
Turn the e-dial to choose an image.
You can select from any of the captured images.
Saves selected image as thumbnail for USER 1
Save
Cancel
MENU OK
5
Use the four-way controller (23) to select [Save], and
press the 4 button.
The image is saved and displayed in the image list.
5
MENU OK
138
Setting the Green Button and E-dial
Functions
5
Setting the Green Button Operation
You can assign one of the following functions to the d/i button and access the function by simply pressing the button when shooting.
Green Button
Preview
One Push File
Format
AE Lock
Enable AF
Resets the values being adjusted. (default setting)
While the d/i button is pressed, you can check the depth of
field by stopping down the aperture to the set value. (p.92)
Temporarily changes the file format. Simultaneously saves an image in both JPEG and RAW formats, regardless of the [File
Format] setting. You can set whether to apply the setting to only one image or not, and select the file format when the d
The exposure setting is locked when the d/i button is
Autofocus is performed only when the d/i button is pressed and not when the shutter release button is pressed halfway.
1
Select [Green Button] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The [Green Button] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select a function, and
press the 4 button.
Preview
One Push File Format
MENU OK
3
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
139
Setting the One Push File Format
When [One Push File Format] is assigned to the d/i button, specify the function settings.
1
Select [One Push File Format] in Step 2 on p.138.
2
Use the four-way controller (23) to select [Cancel after 1
shot], and use the four-way controller (45) to select O or
P .
O
P
The recording format returns to the original file format after a picture is taken. (default setting)
The setting is canceled when any of the following operations are performed.
- the d/i button is pressed again
- the Q button, 3 button, M button or power switch is pressed
- the mode dial is turned
3
Use the four-way controller (23) to choose a file format.
The left side is the [File Format] (p.117) setting and the right side is the
file format when the d/i button is pressed.
4
Press the four-way controller
(5), use the four-way controller
(23) to select a file format that is
used when the d/i button is
pressed, and press the 4 button.
RAW
MENU OK
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
5
140
5
Setting the E-dial Operation in e Mode
Set the value to be changed with the e-dial when the capture mode is set to e (Program Automatic Exposure) mode.
1
Select [Green Button] in Step 2 on p.138.
2
Use the four-way controller (23) to select [E-dial in
Program], and press the four-way controller (5).
3
Use the four-way controller (23) to select the value to be changed
with the e-dial, and press the 4 button.
P SHIFT
Tv
MENU OK
P SHIFT b
Automatically adjusts the shutter speed and aperture value to obtain a proper exposure (Program shift). (default setting)
Switches to Shutter Priority Automatic Exposure mode. Turn the e-dial to adjust the shutter speed.
c
Switches to Aperture Priority Automatic Exposure mode. Turn the e-dial to adjust the aperture value.
OFF Disables the e-dial operation when turned in e mode.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
If the d/i button is pressed after turning the e-dial in e mode, the settings return to normal e mode.
141
Setting the Green Button Operation in a Mode
You can set the function of the d/i button when the capture mode is set to a (Manual Exposure) mode.
1
Select [Green Button] in Step 2 on p.138.
2
Use the four-way controller (23) to select [Action in M
Mode], and press the four-way controller (5).
3
Use the four-way controller (23) to select a function to assign to
the d/i button, and press the
4 button.
P LINE
TvSHIFT
5
MENU OK
P LINE
Tv SHIFT
Av SHIFT
OFF
Adjusts the aperture value and shutter speed to obtain a proper exposure according to the Program Line. (default setting)
Adjusts the shutter speed while the aperture value remains fixed to obtain a proper exposure.
Adjusts the aperture value while the shutter speed remains fixed to obtain a proper exposure.
Disables the d/i button operation when pressed in a mode.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
142
Setting the Lens Functions
You can set the lens functions. Depending on the type of the lens attached, available functions differ.
5
Setting the ND Filter
Sets whether to use the ND filter built-in to the lens.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [ND Filter],
and press the 4 button.
The [ND Filter] screen appears.
3
Use the four-way controller (45) to select [Off] or [On], and press
the 4 button.
The camera returns to the control panel.
MENU
• You can also change the setting from the [A Rec. Mode 1] menu.
• This function is fixed to [Off] when an ND filter is not built in to the lens.
OK
143
Correcting Lens Distortion
Reduces lens distortions occurring due to lens properties.
1
Select [Distortion Correction] in the [A Rec. Mode 2]
menu, and press the four-way controller (5).
2
Use the four-way controller (23) to select [On] or [Off], and press
the 4 button.
1 2 3
Interval Shooting
D-Range Setting
MENU OK
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
The effects of the Distortion Correction function may be barely noticeable in some cases depending on the shooting conditions and other factors.
5
144
Memo
6
Playback Functions
This chapter describes how to use the various playback functions.
Playback Functions Operation ......................... 146
Setting the Playback Display Method .............. 148
Enlarging Images ............................................... 149
Displaying Multiple Images ............................... 150
Displaying Rotated Images ............................... 157
Deleting Multiple Images ................................... 158
Connecting the Camera to an AV Device ......... 161
146
Playback Functions Operation
Make settings related to playing back images in the playback mode palette or [Q Playback] menu.
For details on how to use the menus, refer to “Using the Menus” (p.32).
6
Playback Mode Palette Items
Press the four-way controller (3) in
Playback mode to display the playback mode palette.
You can also display the playback mode palette when a movie is paused.
Rotates captured images.
Useful for image playback on
MENU OK s Image Rotation
D Digital Filter
Z
n Resize
p Index
Item
Function
Displays the rotated image.
Applies filter effects to images for creative control of the picture.
Corrects images of a subject captured with red eyes.
Changes the number of recorded pixels or size of the image, and saves the image as a new file.
Crops out only the desired area of the picture and saves it as a new image.
Joins a number of images together and creates a new image with them.
Page
Z Protect
Protects images from being accidentally erased.
Plays back the images one after another. p.156
u Slideshow s
Saves the settings for an image captured in Cross Processing mode of Custom
Image as Favorite.
h RAW Development
Converts RAW images to JPEG format.
147
[
Item
Movie Editing r DPOF
Function
Divides a movie and deletes unwanted segments.
Sets the number of prints and whether to print the date on images saved on the
SD Memory Card.
*1 This cannot be performed when a movie is displayed.
*2 This cannot be performed when a RAW image is displayed.
*3 This can be performed only when a RAW images are saved.
*4 This can be performed only when a movie is displayed.
Page
Playback Menu Items
You can perform the following settings in the [Q Playback] menu.
Press the 3 button in Playback mode to display the [Q Playback 1] menu.
Menu Item
Slideshow
Q 1
Quick Zoom
Bright/Dark Area
Delete All Images
Function
Plays back the images one after another.
You can set how images will be displayed in the slideshow.
Page
Sets the initial magnification when enlarging images.
Sets whether or not to display the Bright/
Dark Area warning during playback.
You can delete all saved images at once. p.160
6
148
Setting the Playback Display Method
6
You can set the initial magnification when enlarging images, and whether to display the Bright/Dark Area warning in Playback mode.
1
Select [Quick Zoom] in the [Q Playback 1] menu, and
press the four-way controller (5).
2
Use the four-way controller (23) to select the magnification, and
press the 4 button.
Select from [Off] (default setting), [x2],
[x4], [x8] or [x16].
1
Slideshow
Quick Zoom
MENU
X2
X4
X8
X16
OK
3
Use the four-way controller (23) to select [Bright/Dark
Area], and use the four-way controller (45) to select O or
P .
When set to O, bright portions blink red and dark portions blink yellow.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
The Bright/Dark Area warning is not displayed in RGB histogram display and
Detailed information display.
Enlarging Images
149
Images can be enlarged up to 16 times in Playback mode.
1
Use the four-way controller (45) to select an image in
Playback mode.
2
Turn the e-dial to the right
(toward y).
The image enlarges at each click (1.2 to 16 times).
Available operations
E-dial to the right (y)
E-dial to the left (f)
Four-way controller
(2345)
4 button
Enlarges the image (up to 16 times).
Reduces the image (up to 1 times).
Changes the area to display.
Returns a position of the enlarged area to the center (when the enlarged area has been moved to the side).
Switches information display On/Off.
6
M button
• The default setting for the first click (minimum magnification) is 1.2 times. You
can change this in [Quick Zoom] of the [Q Playback 1] menu. (p.148)
• The initial full display of vertical images is displayed with a magnification of
0.675 times that of horizontal images, therefore, magnification at the first click starts at 1.0 times.
150
Displaying Multiple Images
6
Multi-image Display Screen
You can display 4, 9, 20, 42 or 90 thumbnail images on the monitor at the same time. The default setting is nine-image display.
1
Turn the e-dial to the left (toward f) in Playback mode.
The multi-image display screen appears.
Up to nine thumbnail images will be displayed at once (default setting).
INFO
_
0505
Available operations
Four-way controller
(2345)
M button
Moves the selection frame.
Displays the [Multi-img Display Setting] screen.
d /i button
MENU INFO OK
(Display Type cannot be selected when
developing multiple RAW images (p.176).)
Selects and deletes multiple images. (p.158)
2
Press the 4 button.
A full screen display of the selected image appears.
Icons such as C and ? are not displayed with thumbnail images for 90-image display.
Displaying Images by Folder
Images will be grouped and displayed by the folder in which they are saved.
1
In the multi-image display screen, turn the e-dial to the left
(toward f) again.
The folder display screen appears.
The number of images saved in the selected folder appears at the top right of the screen.
151
2
Available operations
Four-way controller
(2345) d /i button
Moves the selection frame.
Deletes the selected folder. (p.159)
Press the 4 button.
The multi-image display screen for the selected folder appears.
6
152
Displaying Images by Shooting Date
(Calendar Display)
Images will be grouped and displayed by the shooting date.
1
In the multi-image display screen, press the M button.
The [Multi-img Display Setting] screen appears.
2
Press the M button again.
The calendar display screen appears.
Only the dates when pictures were taken are displayed.
Number of images shot on this date
4
13
6
8
13
INFO
Shooting date Thumbnail
Available operations
Four-way controller (23) Selects a shooting date.
Four-way controller (45) Selects an image taken on the selected shooting date.
E-dial to the right (y) Displays the selected image at full screen.
Turn to the left (f) to return to the calendar display.
M button d /i button
Returns to the multi-image display screen.
Deletes selected images.
3
Press the 4 button.
A full screen display of the selected image appears.
153
Joining Multiple Images (Index)
Join a number of images together and display them as an index print. You can have the camera select the images to include or you can select the images to include in the index print, and the images will be randomly arranged or displayed by file number depending on the layout selected.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select p (Index),
and press the 4 button.
The Index setting screen appears.
3
Press the four-way controller
(5), use the four-way controller
(23) to select a layout, and
press the 4 button.
Images
Backgrnd.
You can select o (Thumbnail), p (Square), q (Random1), r (Random2), s (Random3) or p (Bubble).
MENU OK
Images are displayed according to the file number (from the smallest number) for o, and are displayed in random order for other layouts.
4
Use the four-way controller (23) to select [Images], and
press the four-way controller (5).
5
Use the four-way controller (23) to select the number of
images, and press the 4 button.
You can select 12, 24 or 36 images.
When the number of saved images is smaller than the number selected, empty spaces will appear when [Layout] is set to o and some images may be duplicated for other layouts.
6
Use the four-way controller (23) to select [Backgrnd.],
and press the four-way controller (5).
7
Use the four-way controller (23) to select the
background color, and press the 4 button.
You can select a white or black background.
6
154
6
8
Use the four-way controller (23) to select [Selection],
and press the four-way controller (5).
9
Use the four-way controller (23) to select a type of image
selection, and press the 4 button. u Auto w Manual x Folder name
Picks images automatically from all of the images saved.
Individually select images you want to include in the index. Continue by selecting [Select image(s)] and select the individual images.
Picks images automatically from the folder selected.
Continue by selecting [Select a folder] and select the folder.
10
Use the four-way controller (23) to select [Create an
index image], and press the 4 button.
The index image is created and a confirmation screen appears.
11
Use the four-way controller (23) to select [Save] or
[Reshuffle], and press the 4 button.
Save
Reshuffle
The index image is saved as a 6 and C file.
Reselects the images to be included in the index and displays a new index image. However, if o (Thumbnail) is selected for [Layout], this item is not displayed.
After the index image is saved, the camera returns to Playback mode and the index image is displayed.
Processing may take a while when creating an index image.
155
Playing Back Images Continuously
You can play back all images saved on your SD Memory Card successively in the slideshow.
Setting the Slideshow Display
Sets how images will be displayed during Slideshow.
1
Select [Slideshow] in the [Q Playback 1] menu, and press
the four-way controller (5).
The Slideshow setting screen appears.
2
Use the four-way controller (23) to select an item you want to change.
Slideshow starts
The following items can be changed.
6
MENU OK
Item
Interval
Screen
Effect
Repeat
Playback
Description
Select an image display interval.
Select a transition effect when the next image is displayed.
Set whether to start the slideshow again from the beginning after the last image is displayed.
Setting
3sec. (default setting)/
5sec./10sec./30sec.
Off (default setting)/Fade/
Wipe/Shrink
P (default setting)/O
3
Press the four-way controller (5), use the four-way
controller (23) to change the setting, and press the 4 button.
156
1
Starting the Slideshow
Select [Start] in Step 2 on p.155, and press the 4 button.
Or, select u (Slideshow) in the playback mode palette,
and press the 4 button.
The start screen is displayed and the slideshow begins.
6
Available operations
4 button Pauses/resumes playback.
Four-way controller (4) Displays the previous image.
Four-way controller (5) Displays the next image.
2
Press the four-way controller (3).
Slideshow stops and the single image display reappears.
After slideshow ends, the camera returns to the single image display even if you do not press the four-way controller (3).
For movies, only the first frame is displayed and then the next image is displayed after the set interval has elapsed. To play back a movie during a slideshow, press the 4 button while the first frame is displayed. When the movie playback is finished, the slideshow will resume.
Displaying Rotated Images
157
You can change the rotation information of an image and save it. Images with changed image rotation information are displayed at the changed orientation during playback.
• You cannot change the rotation information of the following images.
- Protected images
- Images without a rotation information tag
• Movie files cannot be rotated.
1
Select the image you want to rotate in Playback mode, and
press the four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select s (Image
Rotation), and press the 4 button.
The selected image is rotated in 90° increments and the four thumbnail images are displayed.
3
Use the four-way controller
(2345) to select the desired rotation direction, and press the
4 button.
The image rotation information is saved.
MENU OK
6
158
Deleting Multiple Images
You can delete multiple images at once. Be aware that deleted images cannot be restored.
1
Protecting Images from Deletion (Protect) (p.194)
6
Deleting Selected Images
You can delete multiple images in the multi-image display at once.
• Protected images cannot be selected.
• You can select up to 100 images at a time.
1
Turn the e-dial to the left (toward f) in Playback mode.
The multi-image display screen appears.
2
Press the d/i button.
The screen to select images to delete is displayed.
The screen temporarily changes to 42-image display when [Multi-img
Display Setting] (p.150) is set to 90-image display.
3
Select the images to delete.
MENU OK
Available operations
Four-way controller
(2345)
Moves the selection frame.
4 button
E-dial
Confirms/cancels the selection of the image to delete.
Displays a full screen display of the selected image.
(Use the four-way controller (45) to display the previous or next image.)
159
4
Press the d/i button.
The delete confirmation screen appears.
5
Press the four-way controller (2) to select [Select &
Delete], and press the 4 button.
The selected images are deleted.
Deleting a Folder
You can delete a selected folder and all the images in it.
1
Turn the e-dial two clicks to the left (toward f) in
Playback mode.
The folder display screen appears.
2
Use the four-way controller (2345) to select a folder to
delete, and press the d/i button.
The folder delete confirmation screen appears.
3
Press the four-way controller (2) to select [Delete], and
press the 4 button.
The selected folder and all images in it are deleted.
The confirmation screen appears when there are protected images. Use the four-way controller (23) to select [Delete All] or [Leave All] and press the 4 button.
When [Delete All] is selected, protected images are also deleted.
6
160
Deleting All Images
You can delete all saved images at once.
1
Select [Delete All Images] in the [Q Playback 1] menu,
and press the four-way controller (5).
The confirmation screen for deleting all images is displayed.
2
Press the four-way controller (2) to select [Delete All
Images], and press the 4 button.
All images are deleted.
The confirmation screen appears when there are protected images. Use the four-way controller (23) to select [Delete All] or [Leave All] and press the 4 button.
When [Delete All] is selected, protected images are also deleted.
6
Connecting the Camera to an AV
Device
You can connect the camera to a TV or other device with a video input terminal or HDMI input terminal and play back images.
• For an AV device with multiple video input terminals, check the operating manual of the AV device, and select a suitable video input terminal for connecting the camera.
• You cannot output both composite and HDMI video signals at the same time.
• While the camera is connected to an AV device, nothing is displayed on the camera monitor. Also, you cannot adjust the volume on the camera. Adjust the volume on the AV device.
• If you intend to use the camera continuously for a long period, use of the AC
adapter kit (optional) is recommended. (p.40)
161
Connecting the Camera to a Video Input
Terminal or HDMI Input Terminal
Have a cable according to the terminal of the device to which you connect.
Terminal of AV Device
Video terminal
HDMI terminal
Cable Used
AV cable I-AVC7 (optional)
HDMI cable with an HDMI terminal (Type D) (sold separately)
1
Turn the AV device and camera off.
2
Open the terminal cover of the camera, and connect the cable to either the PC/AV terminal or HDMI terminal.
6
162
3
Connect the other end of the cable to the video input terminal on the AV device.
4
Turn the AV device and camera on.
The camera turns on in video mode or HDMI mode, and the camera information is displayed on the screen of the connected AV device.
When using the video output, images are output at normal resolution regardless of the resolution supported by the AV device. To output HD video, use the HDMI output or transfer to and play back on a computer.
6
Setting the Video/HDMI Output Format
Set the video/HDMI output format according to the connected terminal.
Normally, the default output format setting does not have to be changed.
However, if it fails to play back images properly, change the output format setting.
To change the setting, remove the cable first before proceeding.
Selecting the Video Output Format
When the hometown is set at the time of initial setting (p.47), the video
output format is also set in accordance with that region. Depending on the country or region, images may fail to be played back with the set video output format. If this happens, change the video output format setting.
1
Select [Video Out] in the [R Set-up 2] menu, and press the
four-way controller (5).
2
Use the four-way controller (23) to select [NTSC] or
[PAL], and press the 4 button.
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
The video output format differs depending on the region. When you set [Setting
the Time] in the World Time setting (p.181) to X (Destination), the video output
setting changes to the video output format for that city. Refer to “List of World
Time Cities” (p.183) for cities that can be selected as a hometown or destination.
163
Selecting the HDMI Output Format
By default, the maximum resolution is automatically selected to suit the AV device and camera. However, if it fails to play back images properly, change the HDMI output format setting.
1
Select [HDMI Out] in the [R Set-up 2] menu, and press the
four-way controller (5).
2
Use the four-way controller (23) to select the HDMI
output format, and press the 4 button.
Auto
1080i
720p
480p
576p
The maximum resolution that the AV device and camera support is automatically selected. (default setting)
1920×1080i
1280×720p
720×480p (when [Video Out] is set to [NTSC])
720×576p (when [Video Out] is set to [PAL])
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
When the HDMI output format is set to [1080i] or [720p], some screens displayed on the AV device may have a different design from those displayed on the camera.
6
164
Memo
7
Editing Images
This chapter describes how to edit the captured images.
Changing the Image Size ................................... 166
Processing Images ............................................ 168
Developing RAW Images ................................... 174
166
Changing the Image Size
7
Changing the Number of Recorded Pixels (Resize)
Changes the number of recorded pixels, and saves the image as a new file.
• Only JPEG images captured with this camera can be resized.
• Images already resized to S or Z with this camera cannot be resized.
1
Select an image to resize in Playback mode, and press the
four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select n (Resize), and press the 4 button.
The screen to select the recorded pixels appears.
3
Use the four-way controller (45) to select the number of recorded
pixels, and press the 4 button.
You can select one of the image sizes starting from one size smaller than that of the original image. The selectable sizes vary according to the original image size and aspect ratio.
MENU OK
4
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The resized image is saved as a new image.
167
Cropping Out Part of the Image (Cropping)
Crops out only the desired area of the selected image and saves it as a new image. The aspect ratio can also be changed.
• Only JPEG or RAW images captured with this camera can be cropped.
• Images already resized to S or Z with this camera cannot be cropped.
1
Select an image to crop in Playback mode, and press the
four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select o (Cropping), and press the 4 button.
The cropping frame to specify the size and position of the area to crop appears on the screen.
3
Specify the size and position of the area to crop by using the cropping frame.
7
MENU OK
Available operations
E-dial Changes the size of the cropping frame.
Four-way controller (2345) Moves the cropping frame.
mc button Changes the aspect ratio.
d /i button Rotates the cropping frame (only when the cropping frame can be rotated).
4
Press the 4 button.
The save confirmation screen appears.
5
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The cropped image is saved as a new image.
168
Processing Images
7
Processing Images with Digital Filters
You can edit captured images using digital filters.
The following filters are available.
Filter Name
Monochrome
Toy Camera
Creates an image that looks as if taken with a toy camera.
Effect
Creates a monochrome image such as a black-andwhite photo.
Parameter
Filter Effect: OFF/Red/Green/Blue/
Infrared Filter
Toning (B-A): 7 levels
Shading Level: Low/Medium/High
Blur: Low/Medium/High
Tone Break: Red/Green/Blue/Yellow
High
Contrast
Enhances the contrast in the image.
Intensity: 1 to 5
Shading
Creates an image with darkened edges.
Shading Type: 6 types
Shading Level: -3 to +3
Slim
HDR
Changes the horizontal and vertical ratio of images.
Creates an image that looks like a high dynamic range image.
Invert Color Inverts image colors.
-8 to +8
Low/Medium/High
Extract Color
Color
Water Color
Extracts one or two specific colors and makes the rest of the image black and white.
Adds a color filter to the image.
Creates an image that looks as though it was painted.
OFF/ON
Extracted Color 1: Red/Magenta/
Blue/Cyan/Green/Yellow
Extractable Range of Color 1: 1 to 5
Extracted Color 2: OFF/Red/
Magenta/Blue/Cyan/Green/Yellow
Extractable Range of Color 2: 1 to 5
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Density: Light/Medium/Dark
Intensity: Low/Medium/High
Saturation: OFF/Low/Medium/High
169
Filter Name
Posterization
Fish-eye
Retro
Soft
Sketch Filter
Miniature
Frame
Composite
Starburst
Base
Parameter
Adj
Effect
Lessens the tone of the image to create an image that looks as though it was hand-drawn.
Creates an image that looks as though taken with a fish-eye lens.
Parameter
Intensity: 1 to 5
Low/Medium/High
Creates an image with the look of an old photo.
Toning (B-A): 7 levels
Frame Composite: None/Thin/
Medium/Thick
Soft Focus: Low/Medium/High Creates an image with a soft focus throughout the image.
Creates an image that looks as though it was drawn with a pencil.
Shadow Blur: OFF/ON
Contrast: Low/Medium/High
Scratch Effect: OFF/ON
Blurs part of the image to create a simulated miniature scene.
Adds a decorative frame to images.
Creates an image with a special sparkling look by adding extra glitter to the highlights of night scenes or lights reflected on water.
Adjusts the parameters to create the desired image.
In-Focus Plane: -3 to +3
In-Focus Width: Narrow/Middle/Wide
In-Focus Plane Angle: Horizon/
Vertical/Positive Slope/Negative
Slope
Blur: Low/Medium/High
Frame Type: 1/2/3
Frame Width: Thin/Medium/Thick
Shape: Cross/Star/Snow Crystal/
Heart/Musical Note
Effect Density: Small/Medium/Large
Size: Small/Medium/Large
Angle: 0°/30°/45°/60°
Brightness: -8 to +8
Saturation: -3 to +3
Hue: -3 to +3
Contrast: -3 to +3
Sharpness: -3 to +3
Only JPEG and RAW images captured with this camera can be edited using the Digital Filter.
7
170
7
1
Select an image for applying the digital filter in Playback
mode, and press the four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select D (Digital
Filter), and press the 4 button.
The screen to select a filter appears.
3
Use the four-way controller
(2345) to select a filter.
After selecting a filter, you can check the effect on the screen.
You can select a different image by turning the e-dial.
Proceed to Step 6 if you do not need to change the parameters.
4
Press the mc button.
The screen to adjust the parameter appears.
5
Use the four-way controller (23) to select a parameter, and use
the four-way controller (45) to adjust the value.
MENU OK
MENU OK
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Use filters in combination] or [Save as], and
press the 4 button.
Select [Use filters in combination] when you want to apply additional filters to the same image. The screen that was displayed in
Step 3 appears again.
MENU OK
If [Save as] was selected, the filter-processed image is saved as a new image.
Up to 20 filters, including a digital filter used during shooting (p.130), can be
combined to the same image.
171
Recreating Filter Effects
Retrieves the setting of an image with filter effects and applies the same filter effects to other images.
1
Select a filter-processed image in Playback mode.
2
Select D (Digital Filter) in the playback mode palette, and
press the 4 button.
3
Use the four-way controller (23) to select [Recreating filter
effects], and press the 4 button.
The filter effects used for the selected image appear.
4
To check the parameter details,
press the M button.
You can check the filter parameters.
Press the M button again to return to the previous screen.
MENU
Reapplies following digital filter effects from previous image
1.
2.
5.
6.
9.
10.
13.
14.
OK
17.
18.
- -
- -
MENU INFO OK
7
172
5
Press the 4 button.
The image selection screen appears.
6
Use the e-dial to select an image for applying the same filter
effects, and press the 4 button.
You can only select an image that has not been processed with a filter.
The save confirmation screen appears.
MENU OK
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The filter-processed image is saved as a new image.
If [Searching for the original image] is selected in Step 3, the original image prior to digital filter application can be retrieved. If the original image is no longer stored on the SD Memory Card, the message [Original image, prior to digital filter application, is not found] appears.
7
173
Editing Out the Unwanted Red-eye Effect
You can correct images where the flash has caused the subject to appear with red eyes.
• Only JPEG images captured with this camera can be used for the Red-eye
Edit function.
• The Red-eye Edit function does not work on images where red eyes cannot be detected on the camera. [The operation could not be completed correctly] appears in Step 2.
1
Select an image to edit in Playback mode, and press the four-
way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select Z (Red-
eye Edit), and press the 4 button.
The save confirmation screen appears.
3
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The edited image is saved as a new image.
7
174
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them as a new file.
Only RAW images captured with this camera can be developed. RAW images captured with other cameras cannot be developed on this camera.
7
Developing One RAW Image
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23) to select [Developing a Single
Image], and press the 4 button.
The parameters recorded in the image file appear.
Proceed to Step 6 if you do not need to change the parameters.
MENU
If there are no images that can be processed, [No image can be processed] appears.
4
Use the four-way controller (23) to choose a parameter you want to change.
You can select a different image by turning the e-dial.
MENU
OK
OK
The following parameters can be changed.
Parameter
Aspect Ratio
Recorded Pixels
Quality Level
Color Space
Custom Image
White Balance
Value
K /J/I/L
JPEG recorded pixels corresponding to the aspect ratio
C /D/E sRGB/AdobeRGB
Bright/Natural/Portrait/Landscape/Vibrant/
Radiant/Muted/Bleach Bypass/Reversal
Film/Monochrome/Cross Processing
F /G/H/^/JD/JN/JW/JL/I/
L /f/K
Sensitivity
High-ISO NR
Shadow Correction
-2.0 to +2.0
Auto/Low/High
Auto/On/Off
Distortion Correction On/Off
—
Page
5
Use the four-way controller (45) to change the value.
For Aspect Ratio, Recorded Pixels, Quality Level and Color Space, press the four-way controller (5) and use the four-way controller (23) to select an item.
For Custom Image and White Balance, press the four-way controller (5) to display the setting screen.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The RAW image is developed and saved as a new image.
8
Use the four-way controller (23) to select [Continue] or
[Exit], and press the 4 button.
Select [Continue] to edit other images. The screen that was displayed in
Step 4 appears again.
175
7
176
7
Developing Multiple RAW Images
You can develop multiple RAW images with the same settings.
1
Select [Developing Multiple Images] in Step 3 on p.174,
and press the 4 button.
The multi-image display screen appears.
Refer to p.150 for details on operations in the multi-image display screen.
2
Use the four-way controller (2345) to select the RAW
images to be developed, and press the 4 button.
3
Press the mc button.
The development confirmation screen appears.
4
Use the four-way controller (23) to select [Develop images as shot] or [Develop images with modified
settings], and press the 4 button.
To change parameters, select [Develop images with modified settings].
5
Use the four-way controller
(2345) to set [JPEG Recorded
Pixels] and [JPEG Quality].
MENU OK
When [Develop images with modified settings] is selected in Step 4, refer to
p.175 to change other parameters.
MENU OK
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The selected RAW images are developed and saved as new images.
8
Changing Additional
Settings
This chapter describes how to change additional settings.
How to Operate the Set-up Menu ...................... 178
Camera Settings.................................................. 180
File Management Settings.................................. 193
178
How to Operate the Set-up Menu
Perform general settings related to the camera in the [R Set-up] menu.
For details on how to use the menus, refer to “Using the Menus” (p.32).
8
Set-up Menu Items
Perform the following settings in the [R Set-up 1-3] menus.
Press the 3 button in Capture/Playback mode and use the four-way controller (45) or e-dial to display the [R Set-up 1-3] menus.
Menu
R 1
R 2
Item Function
Language/ u
Changes the language in which menus and messages appear.
Date Adjustment Sets the date format and time.
World Time
Sound Effects
Guide Display
LCD Display
Settings
Flicker
Reduction
Video Out
HDMI Out
USB Connection
Folder Name
Sets the display of the local date and time of the specified city so they can be displayed on the monitor in addition to the present location.
Switches the operation sound on/off and changes its volume.
Sets the length of time that the guides are displayed on the monitor when the Capture mode is changed.
Adjusts the brightness and the color of the monitor.
Cuts down on screen flicker by setting the power frequency to that used in your region.
Sets the output format when connecting to an
AV device with a video input terminal.
Sets the HDMI output format when connecting to an AV device with an HDMI terminal.
Sets the USB connection mode when connecting to a computer.
Sets the naming system for folders to store images.
Page
Menu
R 2
R 3
Item
Create New
Folder
Power Saving
Auto Power Off
Reset
Pixel Mapping
Dust Removal
Format
Firmware
Version Info
Function
Creates a new folder on the SD Memory
Card.
You can save battery power by setting the display to dim automatically when no operation is performed for 10 seconds.
Sets the time until the camera turns off automatically.
Resets all settings.
Maps out and corrects any defective pixels in the CMOS sensor.
Cleans the CMOS sensor by shaking it.
Formats an SD Memory Card.
Page
Displays the camera’s firmware version.
179
8
180
Camera Settings
Setting the Sound Effects, Date and Time, and
Display Language
8
Setting the Sound Effects
You can turn the camera operation sound on or off, or change its volume.
The sound for the following items can be set.
• In-focus
• AE-L (AE Lock operation sound)
• Self-timer
• Remote Control
• One Push File Format (operation sound when [One Push File Format] is assigned to the d/i button)
• Shutter Sound
1
Select [Sound Effects] in the [R Set-up 1] menu, and press
the four-way controller (5).
The [Sound Effects 1] screen appears.
2
Press the four-way controller (3), and use the four-way
controller (45) to adjust the volume.
Select from six levels. When set to Z (0), you can turn all the sound effects off.
3
Use the four-way controller (23) to select an item, and use the
four-way controller (45) to
select O or P.
1 2
Self-timer
Remote Control Turn the e-dial to display the [Sound
Effects 2] screen.
MENU
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
181
Changing the Date and Time Display
You can change the initial date and time settings, and their display formats.
Set in [Date Adjustment] of the [R Set-up 1] menu.
1
Setting the Date and Time (p.48)
Setting the World Time
The date and time set in “Initial Settings” (p.47) serve as the date and time
of your present location.
Setting the destination in [World Time] enables you to display the local date and time on the monitor when traveling overseas.
1
Select [World Time] in the [R Set-up 1] menu, and press
the four-way controller (5).
The [World Time] screen appears.
2
Use the four-way controller (45)
to select X (Destination) or W
(Hometown) for [Setting the
Time].
Destination
London
This setting is reflected in the date and time that appear in the guide display and control panel.
MENU
3
Press the four-way controller (3) to select [X Destination],
and press the four-way controller (5).
The [X Destination] screen appears.
4
Use the four-way controller (45) to select a destination city.
Turn the e-dial to change the region.
The location, time difference and current time of the selected city appear.
+06:00
16:00
OK MENU
8
182
5
Press the four-way controller (3) to select [DST], and use
the four-way controller (45) to select O or P.
Select O if the destination city uses daylight saving time (DST).
6
Press the 4 button.
The destination setting is saved and the screen that was displayed in
Step 2 appears again.
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• Refer to “List of World Time Cities” (p.183) for cities that can be selected as
a destination or hometown.
• Select [W Hometown] in Step 3 to change the city and DST settings for the hometown.
• X appears in the control panel and guide display (p.67) if [Setting the Time]
is set to X (Destination). Also, the video output setting (p.162) changes to
the video output format for that city.
8
North
America
Central and
South
America
Europe
Africa/
West Asia
Buenos Aires
Sao Paulo
Rio de Janeiro
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Mexico City
Lima
Santiago
Caracas
Athens
Helsinki
Moscow
Dakar
Algiers
Johannesburg
List of World Time Cities
Region City
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
NTSC
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
Video
Output
Format
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
Region City
Africa/
West Asia
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
East Asia Yangon
Bangkok
Oceania
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
Video
Output
Format
PAL
PAL
PAL
PAL
PAL
PAL
183
8
184
Setting the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
Set in [Language/ u] of the [R Set-up 1] menu.
1
Setting the Display Language (p.47)
8
Setting the Monitor and the Menu Display
Minimizing Battery Consumption
You can set the monitor to dim and the camera to turn off automatically if unused for a certain length of time.
Set in [Power Saving] and [Auto Power Off] of the [R Set-up 2] menu.
Power Saving
Auto Power Off
The monitor brightness goes dim if the camera is unused for 10 seconds. The default setting is O (On).
Press any button to return it to the normal brightness.
The power turns off automatically. Select from [1min.] (default setting), [3min.], [5min.], or [Off].
To turn it back on, press the power switch.
• The Power Saving function does not work while recording a movie.
• The Auto Power Off function does not work in the following situations.
- when a slideshow is played back
- when the camera is connected to a computer with a USB cable
185
Setting the Capture Mode Display Method
Sets the monitor display method in Capture mode.
1
Select [LCD View Options] in the [A Rec. Mode 3] menu,
and press the four-way controller (5).
The [LCD View Options] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select a grid display
type, and press the 4 button.
Select from h (default setting), e (4x4
Grid), f (Golden Section) or g (Scale).
MENU OK
3
Use the four-way controller (23) to select [Histogram] or
[Bright/Dark Area], and use the four-way controller (45)
to select O or P.
Histogram
Bright/Dark Area
Shows the brightness distribution of an image. (p.26)
Bright (overexposed) portions blink red and dark
(underexposed) portions blink yellow. (p.28)
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
8
Setting the Guide Display Time
Set the length of time that the guides (p.67) are displayed on the monitor
when the Capture mode is changed.
Select from [3 sec.] (default setting), [10 sec.], [30 sec.] and [Off].
Set in [Guide Display] of the [R Set-up 1] menu.
186
Setting the Initial Menu Tab Displayed
Set the initial menu tab displayed on the monitor when the 3 button is pressed.
1
Select [12. Save Menu Location] in the [A Custom Setting
2] menu, and press the four-way controller (5).
The [12. Save Menu Location] screen appears.
2
Use the four-way controller (23) to select [Reset Menu
Location] or [Save Menu Location], and press the 4 button.
Reset Menu
Location
The [A Rec. Mode 1] menu ([C Movie 1] menu in C mode, and [Q Playback 1] menu in Playback mode) is always displayed first. (default setting)
Save Menu
Location
The menu tab last selected is displayed first.
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
8
Setting the Display for Instant Review
You can set the Instant Review (p.53) display settings.
1
Select [Instant Review] in the [A Rec. Mode 3] menu, and
press the four-way controller (5).
The [Instant Review] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select a display time,
and press the 4 button.
Histogram
Bright/Dark Area
5sec.
Off
MENU OK
187
3
Use the four-way controller (23) to select [Enlarge
Instant Review], [Histogram] or [Bright/Dark Area], and
use the four-way controller (45) to select O or P.
Enlarge Instant
Review
Histogram
You can enlarge the image with the e-dial. (p.149)
Bright/Dark Area
Shows the brightness distribution of an image. (p.26)
Bright (overexposed) portions blink red and dark
(underexposed) portions blink yellow. (p.28)
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Adjusting the Brightness and the Color of the Monitor
Adjusts the brightness and the color of the monitor.
1
Select [LCD Display Settings] in the [R Set-up 1] menu,
and press the four-way controller (5).
The [LCD Display Settings] screen appears.
2
Use the four-way controller (23) to select the item to adjust.
LCD Display Settings
Brightness Level
8
MENU OK
Brightness Level
Adjust: Blue-Amber
Adjust: Green-Magenta
Changes the brightness of the monitor (-3 to +3).
Adjusts the tone of the colors between blue (B7) and amber (A7).
Adjusts the tone of the colors between green (G7) and magenta (M7).
3
Use the four-way controller (45) to adjust the value.
Press the d/i button to reset the adjustment value.
188
4
Press the 4 button.
5
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
8
Correcting Defective Pixels in the CMOS Sensor
(Pixel Mapping)
Pixel Mapping is a function for mapping out and correcting defective pixels in the CMOS sensor.
Attach a 01 STANDARD PRIME or 02 STANDARD ZOOM lens to the camera.
1
Select [Pixel Mapping] in the [R Set-up 3] menu, and press
the four-way controller (5).
The [Pixel Mapping] screen appears.
2
Press the four-way controller (2) to select [Pixel
Mapping], and press the 4 button.
Defective pixels are mapped out and corrected, and the screen that was displayed before selecting the menu appears again.
• It takes about 30 seconds to correct the defective pixels.
• When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit
(optional) or install a fully charged battery.
189
Selecting Settings to Save in the Camera
(Memory)
You can select which function settings to save when the camera is turned off. The following function settings can be saved.
Function
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Default Setting
O
O
O
O
O
O
Function
Flash Exposure Comp.
Focus Position
Digital Filter
HDR Capture
Playback Info Display
File No.
Default Setting
O
P
P
P
O
O
1
Select [Memory] in the [A Rec. Mode 3] menu, and press
the four-way controller (5).
The [Memory 1] screen appears.
2
Use the four-way controller (23) to select an item, and use the
four-way controller (45) to
select O or P.
Turn the e-dial to display the [Memory 2] screen.
Drive Mode
White Balance
Sensitivity
EV Compensation
MENU
1 2
O Settings are saved even when the camera is turned off.
P
Settings are cleared and returned to their default values when the camera is turned off.
3
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
8
190
• Set [File No.] to O (On) to continue the sequential numbering (four digits) for the file name even if a new folder is created.
O
P
The file number of the last image saved to the previous folder is saved and subsequent images are assigned sequential file numbers even if a new folder is created.
The file number of the first image saved to a folder returns to
0001 each time a new folder is created for saving images.
• When [Reset] of the [R Set-up 3] menu is performed, all Memory settings
return to the default values. (p.190)
Resetting the Menus
8
Resetting the Rec. Mode/Movie/Playback/Set-up Menus
Settings of the direct keys and for the items of the [A Rec. Mode] menu,
[C Movie] menu, [Q Playback] menu, [R Set-up] menu, and playback mode palette can be reset to default values.
1
Select [Reset] in the [R Set-up 3] menu, and press the
four-way controller (5).
The [Reset] screen appears.
2
Press the four-way controller (2) to select [Reset], and
press the 4 button.
The settings are reset, and the screen that was displayed before selecting the menu appears again.
The following settings are not reset.
- Language/ u
- Date Adjustment
- The city and DST settings for World Time
- Flicker Reduction
- Video Out
- [A Custom Setting] menu
Resetting the Custom Setting Menu
Settings for the items of the [A Custom Setting] menu can be reset to default values.
1
Select [Reset Custom Functions] in the [A Custom Setting
2] menu, and press the four-way controller (5).
The [Reset Custom Functions] screen appears.
2
Press the four-way controller (2) to select [Reset], and
press the 4 button.
The settings are reset, and the screen that was displayed before selecting the menu appears again.
191
Checking the Camera Version Information
You can check the version information for software (firmware) in the camera. If an update file for the firmware is released, you can update the camera to the latest firmware version.
Refer to the PENTAX website for more information and procedural details regarding updates.
1
Select [Firmware Version Info] in the [R Set-up 3] menu,
and press the four-way controller (5).
The firmware versions for the camera and lens are displayed on the [Firmware
Version Info] screen.
If an update file is saved on your SD
Memory Card, you can run the update at a later time.
01 STANDARD PRIME
Ver:X.XX
MENU
2
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
8
192
• You cannot return a camera to its previous firmware version after updating it.
• Before running the update, be sure to save the data on your SD Memory Card to a computer or other location.
• When the battery level is low, [Not enough battery power remaining to update the firmware] is displayed on the monitor. Use the AC adapter kit (optional) or install a fully charged battery.
8
File Management Settings
193
Formatting an SD Memory Card
Use this camera to format (initialize) an SD Memory Card that is unused or has been used on other devices.
Formatting deletes all the data saved on the SD Memory Card.
• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.
• Formatting deletes all data, both protected and unprotected. Be aware.
1
Select [Format] in the [R Set-up 3] menu, and press the
four-way controller (5).
The [Format] screen appears.
2
Press the four-way controller (2) to select [Format], and press the
4 button.
Formatting starts.
When formatting is completed, the screen that was displayed before selecting the menu appears again.
OK
When an SD Memory Card is formatted, the volume label assigned to the card is “Q10”. When this camera is connected to a computer, the SD Memory Card is recognized as a removable disk with the name “Q10”.
8
194
8
Protecting Images from Deletion (Protect)
You can protect images from being accidentally deleted.
Even protected images are deleted if the inserted SD Memory Card is formatted.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select Z
(Protect), and press the 4 button.
The screen to select how to change the settings is displayed.
3
Use the four-way controller (23) to select [Single Image] or [All
Images], and press the 4 button.
If you selected [All Images], proceed to
Step 5.
MENU
4
Use the e-dial to select an image to protect.
5
Press the four-way controller (2) to select [Protect], and press the
4 button.
Select [Unprotect] to cancel the protection of the image.
The image is protected and the Y icon appears at the top right of the screen.
MENU
Repeat Steps 4 and 5 to protect other images.
6
Press the 3 button.
The camera returns to Playback mode.
Protect
Unprotect
OK
OK
Changing the Naming System for Folders
When images are captured with this camera, a folder is automatically created and the captured images are stored in the new folder. Each folder name consists of a sequential number from 100 to 999 and a string of 5 characters.
You can change the folder name in [Folder Name] of the [R Set-up 2] menu.
Date
PENTX
The two digits of the month and day on which the picture was taken are assigned as the folder name in the form of [xxx_MMDD]. [MMDD]
(month and day) appears according to the display format set in [Date
Adjustment] (p.48). (default setting)
Example) 101_0125: Folder for images taken on January 25th
The folder name is assigned in the form of [xxxPENTX].
Example) 101PENTX
A maximum of 500 images can be stored in a single folder. When the number of captured images exceeds 500, a new folder is created to store the additional images. In Exposure Bracketing shooting, images will be stored in the same folder until shooting is completed, even if the number of images exceeds 500.
195
Creating New Folders
You can create a new folder on the SD Memory Card. A folder is created with the number following the number of the folder currently being used.
1
Select [Create New Folder] in the [R Set-up 2] menu, and
press the four-way controller (5).
The [Create New Folder] screen appears.
2
Press the four-way controller (2) to select [Create folder], and
press the 4 button.
A folder with a new number is created when the next still picture or movie is saved.
OK
Only one folder can be created using this operation. Multiple empty folders cannot be created consecutively.
8
196
8
Setting the DPOF Settings
By adding DPOF (Digital Print Order Format) settings to stored images on the SD Memory Card, you can specify the number of copies and whether to imprint the date on the images in advance and order conventional photograph prints by taking this SD Memory Card to a store for printing.
• DPOF settings cannot be applied to RAW images and movies.
• You can make DPOF settings for up to 999 images.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select r (DPOF),
and press the 4 button.
The screen to select how to change the settings is displayed.
3
Use the four-way controller (23) to select [Single Image] or [All
Images], and press the 4 button.
If you selected [All Images], proceed to
Step 5.
MENU OK
4
Use the e-dial to select an image to set DPOF settings.
5
Use the four-way controller (23) to select the number of copies.
You can set up to 99 copies.
K appears at the top right of the screen for images with DPOF settings.
To cancel the DPOF settings, set the number of copies to [00].
MENU
Copies 01
OK
6
Press the mc button to select O or P for printing the date.
O The date will be printed.
P The date will not be printed.
Repeat Steps 4 to 6 to make DPOF settings for other images.
7
Press the 4 button.
The DPOF settings for the selected image is saved and the camera returns to Playback mode.
• Depending on the printer or printing equipment at the photo processing lab, the date may not be printed on the pictures.
• The number of copies specified in the All Images setting applies to all the images, and that specified in the Single Image setting is canceled.
197
8
198
Memo
9
Connecting to a
Computer
This chapter explains how to connect the camera to a computer, install the supplied CD-ROM, etc.
Manipulating Captured Images on a
Computer ............................................................ 200
Saving Images on a Computer .......................... 201
Using the Provided Software ............................ 203
200
Manipulating Captured Images on a
Computer
The captured still pictures and movies can be transferred to a computer by connecting the camera using a USB cable, and RAW images can be developed using the provided software “SILKYPIX Developer Studio”.
We recommend the following system requirements to connect the camera to a computer or to use the software.
Windows
OS
CPU
RAM
Windows XP (SP3 or later, 32-bit Home/Pro), Windows Vista (32-bit,
64-bit), Windows 7 (32-bit, 64-bit)
• Installation requires administrator rights
• Can be run as a 32-bit application on any 64-bit Edition of Windows
Intel Pentium-compatible processor (Pentium 4, Athlon XP or higher recommended)
• Supports multi-core processors (Intel Core i5, i7; Core 2 Quad, Duo;
AMD Phenom II X4, X6; Athlon II X2, X4; and other)
1 GB minimum (2 GB or more recommended)
HDD
For installing and starting up the program: 100 MB minimum of free space
For saving image files: Approx. 10 MB/file
Monitor 1024×768 dots, 24-bit full color or higher
Other Input devices such as a keyboard and mouse
9
Macintosh
OS
CPU
RAM
Mac OS X 10.5, 10.6, or 10.7
Intel processor-compatible, Power PC
1 GB minimum (2 GB or more recommended)
HDD
For installing and starting up the program: 100 MB minimum of free space
For saving image files: Approx. 10 MB/file
Monitor 1024×768 dots, 24-bit full color or higher
Other Input devices such as a keyboard and mouse
• Use the provided software to develop RAW images captured with this camera.
• QuickTime is required to play back movies transferred to a computer.
You can download it from the following site: http://www.apple.com/quicktime/download/
Saving Images on a Computer
201
Setting the USB Connection Mode
Set the USB connection mode when connecting the camera to a computer.
1
Select [USB Connection] in the [R Set-up 2] menu, and
press the four-way controller (5).
2
Use the four-way controller (23) to select [MSC] or [PTP],
and press the 4 button.
3
MSC
PTP
Mass Storage Class (default setting)
A general-purpose driver program that handles devices connected to the computer via USB as a memory device.
Picture Transfer Protocol
A protocol that allows transfer of digital images and control of digital cameras via USB.
Unless otherwise specified, select [MSC].
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
9
202
Connecting the Camera and a Computer
Connect the camera to a computer using the provided USB cable I-USB7.
1
Turn the computer on.
2
Turn off the camera, and use the USB cable to connect the
PC/AV terminal of the camera and the computer.
9
3
Turn the camera on.
The camera is recognized as a removable disk or an SD Memory Card with a volume label “Q10”.
If the “Q10” dialog appears when the camera is turned on, select [Open folder to view files using Windows Explorer] and click the OK button.
4
Save the captured images to the computer.
Copy the image file(s) or folder(s) to the hard disk of the computer.
5
Disconnect the camera from the computer.
The camera cannot be operated while it is connected to the computer. To operate the camera, terminate the USB connection on the computer, then turn off the camera and remove the USB cable.
Using the Provided Software
203
“SILKYPIX Developer Studio 3.0 for PENTAX” is included on the CD-ROM
(S-SW131). With the SILKYPIX Developer Studio, you can develop RAW files, adjust the color of the images and other settings, and save the new images as a JPEG or TIFF file.
Installing the Software
You can install the software from the provided CD-ROM.
When multiple accounts have been setup on a computer, log on with an account that has administrative rights before installing the software.
1
Turn the computer on.
Make sure no other software is running.
2
Place the CD-ROM into the CD/DVD drive on the computer.
The [PENTAX Software Installer] screen appears.
If the [PENTAX Software Installer] screen does not appear
• For Windows
1 Click [My Computer] from the Start menu.
2 Double-click the [CD/DVD drive (S-SW131)] icon.
3 Double-click the [Setup.exe] icon.
• For Macintosh
1 Double-click the CD/DVD (S-SW131) icon on the desktop.
2 Double-click the [PENTAX Installer] icon.
9
204
3
Click [SILKYPIX Developer
Studio 3.0 for PENTAX].
For Macintosh, follow the instructions on the screen to perform subsequent steps.
4
Select the desired language in the [Choose Setup
Language] screen, and click [OK].
5
When the [InstallShield Wizard] screen appears in the selected language, click [Next].
Follow the instructions on the screen to perform subsequent steps.
Start SILKYPIX Developer Studio and see the help menu for details on using the software program.
9
Regarding Product Registration
To better serve you, please take a moment to register your software.
Click [Product Registration] on the
205
A world map for Internet Product
Registration is displayed. If a computer is connected to the
Internet, click the displayed country or region and then follow the instructions to register your software.
Note that you can only register online if your country or area is shown.
9
206
Memo
10
Using the Flash
This chapter provides details on the built-in flash and describes how to take pictures with an external flash.
Using the Built-in Flash ..................................... 208
Using an External Flash (Optional) .................. 211
208
Using the Built-in Flash
Flash Characteristics in Each Exposure Mode
Using the Flash in b Mode
• When taking a moving subject, you can use the flash to change the blur effect.
• The aperture value automatically changes according to the ambient brightness.
Using the Flash in c Mode
• You can set the desired aperture value to take a flash photograph when you want to change the depth of field or shoot a subject farther away.
• The shutter speed automatically changes with the ambient brightness.
10
Using the Slow-speed Sync
You can use Slow-speed Sync in . (Night Scene Portrait) of H (Scene) mode or b (Shutter Priority Automatic Exposure) mode when shooting portraits with the sunset in the background. Both the portrait and the background are captured beautifully. G and H can be used in e
(Program Automatic Exposure) or c (Aperture Priority Automatic
Exposure) mode.
• Slow-speed Sync slows down the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake. The picture will also blur if the subject moves.
• Slow-speed Sync can also be performed with an external flash.
Using the Trailing Curtain Sync
Trailing Curtain Sync discharges the flash immediately before the shutter closes. When shooting moving objects with a slow shutter speed, Trailing
Curtain Sync and Slow-speed Sync produce different effects depending on when the flash is discharged.
For example, when shooting a moving car with Trailing Curtain Sync, trailing light is captured while the shutter is open and the flash captures the car immediately before the shutter is closed. Therefore, the picture will include a sharp, well-lit car with trailing light behind it.
209
Slow-speed Sync
(Leading Curtain Sync)
Trailing Curtain Sync
Trailing Curtain Sync slows down the shutter speed. Use the Shake Reduction function, or turn off the Shake Reduction function and use a tripod to avoid camera shake.
Distance and Aperture when Using the Built-in Flash
Relationships among the guide number, aperture and distance must be considered when shooting with the flash to obtain a correct exposure.
Calculate and adjust the shooting conditions if the flash output is not sufficient.
Sensitivity
ISO 100
ISO 200
ISO 400
ISO 800
Built-in Flash
Guide Number
Approx. 4.9
Approx. 7
Approx. 10
Approx. 14
Sensitivity
ISO 1600
ISO 3200
ISO 6400
Built-in Flash
Guide Number
Approx. 20
Approx. 28
Approx. 40
10
210
Calculating Shooting Distance from Aperture Value
The following equation calculates the effective distance of the flash.
Maximum flash distance L1 = Guide number ÷ Aperture value
Minimum flash distance L2 = Maximum flash distance ÷ 6 *
* The value 6 used in the formula above is a fixed value which applies only when using the built-in flash alone.
Example)
When the sensitivity is ISO 200 and the aperture value is F2.0
L1 = 7 ÷ 2.0 = approx. 3.5 (m)
L2 = 3.5 ÷ 6 = approx. 0.6 (m)
Therefore, the flash can be used in the range of about 0.6 m to 3.5 m.
However, the built-in flash in this camera cannot be used when the distance is 0.7 m or less. When the flash is used at closer than 0.7 m, it causes vignetting in the picture corners, light is distributed unevenly and a picture may be overexposed.
Calculating Aperture Value from Shooting Distance
The following equation calculates the aperture value for shooting distances.
Aperture value F = Guide number ÷ Shooting distance
Example)
When the sensitivity is ISO 200 and the shooting distance is 3 m, the aperture value is:
F = 7 ÷ 3 = approx. 2.3
If the resulting number (2.3, in the above example) is not available as a lens aperture, a smaller number that is closest (2.0, in the above example) is generally used.
10
Lens Compatibility with the Built-in Flash
Depending on the lens used with this camera, even if a lens without a hood is attached, the use of the built-in flash may not be available or may be limited due to vignetting.
The built-in flash is not available due to vignetting
Lens Name
03 FISH-EYE
Using an External Flash (Optional)
211
Using an optional external flash AF540FGZ, AF360FGZ, AF200FG or
AF160FC enables a variety of flash modes, such as P-TTL auto flash mode, depending on the external flash being used.
z : Available ×:Not available
Flash
Camera Function
Red-eye reduction flash
Auto flash discharge
Automatically switching to the flash sync speed
Aperture value is automatically set in e mode and b mode.
P-TTL auto flash
Slow-speed Sync
Flash exposure compensation
Auto zoom flash head
AF assist light of external flash
Trailing Curtain Sync
Contrast-control-sync flash mode
Slave flash
Wireless flash
Built-in
Flash z z z z z z z
×
× z
×
×
×
AF540FGZ
AF360FGZ z z z z z z z z
× z
×
×
×
AF200FG
AF160FC z z z z z z
×
×
× z
×
×
×
*1 1/2000 sec. or slower for a 01 STANDARD PRIME/02 STANDARD ZOOM lens (1/250 sec. or slower for external flash units), 1/13 sec. or slower for a 03 FISH-EYE/04 TOY
WIDE/05 TOY TELEPHOTO lens.
• The built-in flash will not discharge if the camera is connected to an external flash.
• Flashes with reversed polarity (the center contact on the hot shoe is minus) cannot be used due to the risk of damaging the camera and flash.
• When an external flash is attached directly to the hot shoe of the camera, the camera’s center of gravity is greatly shifted, making it difficult to take pictures.
When using an external flash, it is recommended to use an extension cord to
separate the camera and flash. (p.213)
• To use an AF160FC flash with the camera, a commercially available step-up ring or similar accessory is needed.
• To use the Auto flash mode of an AF540FGZ or AF360FGZ flash, set the camera's capture mode to a (Manual Exposure) mode and built-in flash to a
(Flash Off).
10
212
Using P-TTL Mode
You can use the P-TTL auto flash with an AF540FGZ, AF360FGZ,
AF200FG or AF160FC flash unit.
1
Remove the cover of the hot shoe, and attach the external flash.
2
Turn on the camera and the external flash.
3
Set the external flash mode to [P-TTL].
4
Confirm that the external flash is fully charged, and then take a picture.
• The maximum sync speed available with an external flash is 1/250 sec.
• The P-TTL auto flash is only available with an AF540FGZ, AF360FGZ,
AF200FG or AF160FC flash unit.
• For details such as operation method and effective distance, please refer to the external flash manual.
• The flash does not discharge if the subject is bright enough when the flash mode is set to C or i. Therefore, it may not be suitable for daylight-sync shooting.
• Never pop up the built-in flash when any external flash unit is attached to the camera. The built-in flash will hit the external flash.
10
Red-eye Reduction
As with the built-in flash, the red-eye reduction function is available with an external flash. The red-eye reduction function works by discharging the flash twice even when only an external flash is used.
However, this function may not be available on some flashes or may
have restrictions for usage conditions. Refer to the chart on p.211.
Connecting an External Flash with an
Extension Cord
Attach the Hot Shoe Adapter F
G
(optional) to the camera hot shoe and an
Off-Camera Shoe Adapter F (optional) to the bottom of the external flash, and connect these with the Extension Cord F5P (optional) as shown in the illustration below. The Off-Camera Shoe Adapter F can be mounted to your tripod using the tripod screw.
The built-in flash will not discharge if the camera is connected to an external flash.
213
• Do not combine with accessories that have a different number of contacts, such as a Hot Shoe Grip, as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown.
10
214
Memo
11
Appendix
Default Settings .................................................. 216
Functions Available with Various Lens
Combinations ..................................................... 222
Cleaning the CMOS Sensor ............................... 224
Error Messages .................................................. 225
Troubleshooting ................................................. 227
Main Specifications ............................................ 230
Index .................................................................... 236
WARRANTY POLICY .......................................... 242
216
Default Settings
11
The table below shows the factory default settings.
The functions set in Memory (p.189) are saved even when the camera is
turned off.
Reset Setting
Yes: The setting returns to the default setting with the reset function
No: The setting is saved even after reset.
Direct Keys
Item
Sensitivity
White Balance
Flash Mode
Default Setting
ISO AUTO 100 - 3200
F (Auto)
Depends on Capture mode
Reset
Setting
Yes
Yes
Yes
Drive Mode 9 (Single Frame Shooting) Yes
Page
Quick Dial
Position
3
4
1
2
Default Setting
Smart Effect [Brilliant Color]
Smart Effect [Unicolor Bold]
Smart Effect [Vintage Color]
Smart Effect [Cross Processing]
Reset
Setting
Page
Yes
[A Rec. Mode] Menu
Item
Custom Image
Digital Filter
Aspect Ratio
File Format
Image
Capture
Settings
JPEG Recorded Pixels
JPEG Quality
Color Space
Focus Method
Focus
Settings
Autofocus Method
MF Assist
Focus Peaking
AE Metering
ND Filter
HDR Capture
Multiexposure
Number of Shots
Auto EV Adjustment
Interval
Interval
Shooting
Number of Shots
Start Interval
D-Range
Setting
High-ISO NR
Start Time
Highlight Correction
Shadow Correction
Distortion Correction
Quick Dial
217
Default Setting
Reset
Setting
Page
Bright Yes
Not use any filters Yes
I
JPEG
Yes
Yes
E (4000×3000) Yes
C (Best) Yes
sRGB
=
F (AF Select
(25 Points))
Off
Off
Yes
Yes
Yes
Yes
Yes
L
(Multi-segment)
Off
Off
2 times
P (Off)
00:00'01"
Yes
Yes
Yes
Yes
Yes
Yes
2 images
Now
Yes
Yes
12:00 AM/00:00 Yes
Auto Yes
Auto
Auto
On
Smart Effect
Yes
Yes
Yes
Yes
11
218
Item
Green
Button
LCD View
Options
Green Button
One Push
File Format
Cancel after 1 shot
JPEG/RAW/
RAW+ File
Format
Action in M Mode
E-dial in Program
Show Grid
Histogram
Bright/Dark Area
Instant
Review
Display Time
Enlarge Instant Review
Histogram
Bright/Dark Area
Memory
Focus Position, Digital Filter,
HDR Capture
Other than the above functions
Shake Reduction
Input Focal Length
Default Setting
Green Button
O (On)
All RAW+
P LINE
P SHIFT h (Off)
P (Off)
P (Off)
1 sec.
P (Off)
P (Off)
P (Off)
P (Off)
O (On)
Q (On)
0000.0 mm
Reset
Setting
Yes
Yes
Page
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
11
[C Movie] Menu
Item
Recorded Pixels
Sound
Exposure Setting
Movie SR
Interval Movie
Interval
Recording
Time
Start Interval
Start Time
Default Setting a
(1920×1080, K) g (On)
Auto
Q (On)
1 sec.
5 sec.
Now
12:00 AM / 00:00
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
Playback Mode Palette
Image Rotation
Digital Filter
Red-eye Edit
Resize
Item
Cropping
Index
Protect
Slideshow
Save Cross Processing
RAW Development
Movie Editing
DPOF
[Q Playback] Menu
Item
Slideshow
Quick Zoom
Bright/Dark Area
Delete All Images
Interval
Screen Effect
Repeat Playback
Default Setting
—
Monochrome
—
Maximum size according to the setting
Maximum size according to the setting
—
—
—
—
Recorded Pixels: E
Quality Level: C
—
—
Reset
Setting
—
Yes
—
—
—
—
No
Yes
Yes
Yes
—
No
Page
Default Setting
3 sec.
Off
P (Off)
Off
P (Off)
—
Reset
Setting
Yes
Yes
Yes
Yes
Yes
—
Page
219
11
220
11
[R Set-up] Menu
Item Default Setting
Language/ u
Date Adjustment
English
01/01/2012
World Time setting
W (Hometown)
Hometown (City) According to initial setting
World Time
Hometown (DST) According to initial setting
Destination (City) Same as Hometown
Destination (DST) Same as Hometown
Sound
Effects
Volume
Setting
Guide Display
LCD Display Settings
Flicker Reduction
Video Out
HDMI Out
USB Connection
3
All O (On)
3 sec.
±0
50 Hz
According to initial setting
Auto
MSC
Folder Name
Create New Folder
Power Saving
Auto Power Off
Reset
Pixel Mapping
Dust Removal
Dust
Removal
Start-up Action/
Shut-down Action
Format
Firmware Version Info
Date
—
O (On)
1 min.
—
—
—
P (Off)
—
—
Yes
Yes
—
Yes
Yes
—
—
—
Yes
Yes
No
No
Yes
Yes
Yes
—
—
Reset
Setting
No
No
Yes
No
No
No
No
Page
[A Custom Setting] Menu
Item
1. AE-L with AF Locked
2. Link AE to AF Point
3. Auto Bracketing Order
4. Shake Reduction Options
5. WB When Using Flash
6. AWB in Tungsten Light
7. AF Release Options
8. AF Assist Light
9. AF with Remote Control
10. Flash When Retracted
11. Release While Charging
12. Save Menu Location
Reset Custom Functions
Default Setting
On
Off
0 – +
Mode1
Auto White Balance
Subtle Correction
Focus-priority
On
Off
Discharge Flash
Off
Reset Menu Location
Disable
—
Page
—
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Reset
Setting
Yes
Yes
Yes
Yes
Yes
221
11
222
Functions Available with Various
Lens Combinations
A group
B group
C group
D group
01 STANDARD PRIME
02 STANDARD ZOOM
06 TELEPHOTO ZOOM
04 TOY WIDE
05 TOY TELEPHOTO
03 FISH-EYE
ADAPTER Q FOR K MOUNT LENS z : Available
# : Restricted
× : Not available
11
Function
Autofocus
Manual focus n e
/
/b/c mode a mode
C mode
Lens Type
Quick-Shift focus
Autofocus Method
Aperture control
ND filter on the lens
Shutter on the lens
Electronic shutter
Multi-segment metering
H/u mode
P-TTL Auto Flash
A group z z z z z z z
z z z z z
z
z
B group
× z
×
×
×
×
× z z
#
#
#
#
z
C group
× z
×
×
×
×
× z
×
(Centerweighted metering)
#
#
D group
× z
×
×
×
×
z z
#
#
#
#
#
*1 Set [13. Electronic Shutter] to [Enable] in the [A Custom Setting 2] menu. You can take pictures at higher speeds with the electronic shutter than with the lens shutter.
Ex.) With a 01 STANDARD PRIME lens
Pictures taken at 1/2000 sec. or slower with the lens shutter and 1/2000 sec. to
1/8000 sec. with the electronic shutter.
*2 Aperture value fixed.
*3 h mode not available in a mode. Allows the use of a slow shutter speed of up to 2 sec.
*4 Built-in flash: 1/2000 sec., external flash: 1/250 sec.
*5 Flash sync speed is approx. 1/13 sec.
223
*6 Light is unevenly distributed.
*7 When using the lens shutter built-in to the adapter
*8 Set the aperture manually.
*9 Light may be unevenly distributed.
Using a K-Mount Lens
A K-mount lens can be attached to this camera with the use of the optional
Adapter Q for K Mount Lens. When a K-mount lens is used, the focal length must be set manually for functions such as Shake Reduction, since the focal length cannot be obtained automatically.
1
Make sure that [Shake Reduction] is set to Q (On), and turn the camera off.
Refer to “Taking Pictures Using the Shake Reduction Function” (p.93) for
details.
2
Attach the mount adapter and lens, and turn the camera on.
The [Input Focal Length] screen appears.
3
Use the four-way controller
(2345) to set the focal length.
Select the focal length for the lens to be attached. When using a zoom lens, select the actual focal length at the zoom setting
21.0
35.0
77.0
135.0
0 0 0 0 . 0 being used.
MENU
You can also use the e-dial to select a value from those displayed on the left side of the monitor.
mm
OK
4
Press the 4 button.
The camera is ready to take a picture.
• To change the focal length setting, use [Input Focal Length] in the [A Rec.
Mode 3] menu.
• When the Adapter Q for K Mount Lens is used, set the aperture manually regardless of the capture mode setting. Images are taken in c (Aperture
Priority Automatic Exposure) mode, even when the capture mode is set to n (Auto Picture), H (Scene), u (Blur Control), e (Program Automatic
Exposure), or b (Shutter Priority Automatic Exposure).
• Refer to the Adapter Q for K mount lens manual for details.
11
224
Cleaning the CMOS Sensor
11
If the CMOS sensor becomes dirty or dusty, shadows may appear in the image in certain situations such as when shooting against a white background. This indicates that the CMOS sensor must be cleaned.
Removing Dust by Shaking the CMOS Sensor
(Dust Removal)
Shaking the CMOS sensor removes dust that has collected.
1
Select [Dust Removal] in the [R Set-up 3] menu, and press
the four-way controller (5).
The [Dust Removal] screen appears.
2
Press the 4 button.
The Dust Removal function is activated by shaking the CMOS sensor.
To activate the Dust Removal function every time the camera is turned on and off, set [Start-up Action] and [Shut-down
Action] to O.
Start-up Action
Shut-down Action
MENU OK
When Dust Removal is completed, the camera returns to the [R Set-up
3] menu.
Use a brush-less blower to remove dirt and dust from the CMOS sensor. Using a blower with a brush may scratch the CMOS sensor. Do not wipe the CMOS sensor with a cloth.
Error Messages
225
Error Messages
Memory card full
No more image/movie can be saved
No image
This image cannot be displayed
No card in the camera
Memory card error
Card is not formatted
Card is locked
This image cannot be enlarged
This image is protected
Not enough battery power remaining to activate Pixel Mapping
Description
The SD Memory Card is full and no more images can be saved. Insert a new SD Memory Card or
delete unwanted images. (p.42, p.158)
You may be able to save more images if you
change the image capture settings. (p.116)
The SD Memory Card has 65,535 files saved on it and no more files can be saved. Insert a new
SD Memory Card or delete unwanted files. (p.42, p.158)
There are no images that can be played back on the SD Memory Card.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on another brand of camera or a computer.
There is no SD Memory Card inserted in the
The SD Memory Card has a problem, and image capture and playback are impossible. It may be viewable on a computer but not with this camera.
The SD Memory Card you have inserted is unformatted or has been formatted on another device and is not compatible with this camera.
Use the card after formatting it with this camera.
The write-protect switch on the SD Memory Card you have inserted is locked. Unlock the SD
Memory Card.
You are trying to enlarge an image that cannot be enlarged.
You are trying to delete an image that is protected. Remove protection from the image.
Appears during Pixel Mapping if the battery level is insufficient. Install a fully charged battery, or
use the AC adapter kit (optional). (p.40)
11
226
11
Error Messages
Not enough battery power remaining to update the firmware
Unable to update firmware.
There is a problem with the firmware update file
Image folder cannot be created
Unable to store image
Settings not stored
The operation could not be completed correctly
No more images can be selected
No image can be processed
This image cannot be processed
The camera failed to create an image
This function is not available in the current mode
The camera will turn off to prevent damage from overheating
Description
Appears when trying to update the firmware if the battery level is insufficient. Install a fully charged battery, or use the AC adapter kit (optional).
Unable to update the firmware. The update file is damaged. Try downloading the update file again.
The maximum folder number (999) and file number (9999) are being used, and no more images can be saved. Insert a new SD Memory
Card or format the card. (p.193)
The image could not be saved because of an SD
Memory Card error.
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted images
and perform DPOF setting again. (p.158)
The camera was unable to measure the manual
white balance (p.122) or use HDR Capture
(p.125). Try the operation again.
You cannot select more than the maximum
number of images for Index (p.153) and Select &
There are no images that can be processed
using Digital Filter (p.168) or RAW Development
Appears when you try to perform Resize (p.166),
Cropping (p.167), Digital Filter (p.168), Red-eye
Edit (p.173) or RAW Development (p.174) for
images captured with other cameras, or when you try to perform Resize or Cropping for minimum file size images.
The creation of an index print image failed.
You are trying to set a function that is not available when the capture mode is set to n
(Auto Picture), H (Scene) or C (Movie) mode.
The camera will turn off because its internal temperature gets too hot. Leave the camera turned off until it has had time to cool down before turning on the camera again.
Troubleshooting
227
In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the battery out and putting it back in again. After these procedures are done, if the camera operates correctly, it does not require any repairs.
We recommend checking the following items before contacting a service center.
Problem
The camera does not turn on
The shutter cannot be released
Autofocus does not work
Cause
Battery is not installed
Battery is not installed properly
The battery power is low
The built-in flash is charging
There is no available space on the SD Memory
Card
Recording
Remedy
Check if battery is installed. If not, install a fully charged battery.
Check the orientation of battery. (p.38)
Install a fully charged battery, or use the
AC adapter kit (optional). (p.40)
Wait until charging is finished.
Insert an SD Memory Card with available
space or delete unwanted images. (p.42,
The subject is difficult to focus on
The subject is not in the focusing area
Wait until recording is finished.
Autofocus cannot work well for subjects that have low contrast (the sky, white walls, etc.), dark colors, intricate designs, rapidly-moving objects or scenery shot through a window or a net-like pattern.
Lock focus on another object located at the same distance as your subject, then aim at the target and press the shutter release button fully. Alternatively, use
Position the subject in the focus frame on the monitor. If the subject is outside the focusing area, aim the camera at the subject and lock the focus, then compose a picture and press the shutter release
11
228
11
Problem
Autofocus does not work
The focus cannot be locked
Cause
The subject is too close
The focus method is set to \
Move away from the subject and take a picture.
Remedy
Set [Focus Method] to =. (p.84)
[Autofocus Method] is set to [Face
Detection] or
[Tracking]
The capture mode is set to \,
R or n of mode.
l , Z
H
,
Autofocus is not locked (focus lock) when
[Autofocus Method] is set to [Face
Detection] or [Tracking]. The camera will continue focusing on the subject while the shutter release button is pressed halfway.
If there is a subject that you want to focus on, set [Autofocus Method] to [AF Select
(25 Points)], [Select], or [Spot], and use
Set the capture mode to any mode other than \ (Moving Object), l (Night Snap),
Z (Pet) , R (Kids) or n (Stage Lighting) of
The AE Lock function does not operate
The shutter speed is set to h
Set the shutter speed to any mode other
The built-in flash does not discharge
When the flash mode is set to C or
C, the flash will not discharge if the subject is bright
Set the flash mode to b (Flash On) or D
(Flash On+Red-eye Reduction). (p.55)
The capture mode is set to K, d,
A, Z, p, y,
U , n or E of H mode
Set H (Scene) mode to any mode other than K (Sunset), d (Blue Sky), A
(Night Scene), Z (Night Scene HDR), p (HDR), y (Backlight Silhouette),
U (Candlelight), n (Stage Lighting) or
The USB connection with a computer does not work properly
The USB connection mode is set to [PTP]
Set [USB Connection] in the [R Set-up 2]
Problem
Shake
Reduction does not work
The shooting settings cannot be changed
Cause
The Shake
Reduction function is off
Shutter speed is too slow for the Shake
Reduction function to be effective when panning or shooting night scenes, etc.
Set [Shake Reduction] to off and use a tripod.
Remedy
Set [Shake Reduction] to on. (p.93)
The subject is too close
The quick dial is set to the position 1 to 4
Move away from the subject, or turn off the Shake Reduction function and use a tripod.
When you use the quick dial to take pictures, priority is given to the settings
saved in the quick dial. (p.133)
229
11
230
Main Specifications
Model Description
Type
Lens Mount
Compatible Lens
Lens-interchangeable SL digital camera
PENTAX bayonet Q-mount
Q-mount lenses
11
Image Capture Unit
Image Sensor
Effective Pixels
Total Pixels
Dust Removal
Sensitivity
(Standard Output)
Image Stabilizer
Type: CMOS sensor with a primary color filter, Size: 1/2.3-inch
Approx. 12.4 megapixels
Approx. 12.76 megapixels
Image sensor cleaning using ultrasonic vibrations “DR II”
ISO AUTO: ISO 100 to ISO 6400 (1/3 EV step)
*Up to ISO 1600 when the shutter speed is set to 2 sec. or slower.
Sensor shift Shake Reduction
File Formats
File Formats
Recorded Pixels
Quality Level
Color Space
Storage Media
Storage Folder
RAW (DNG), JPEG (Exif 2.3), DCF2.0 compliant
JPEG: K k (4000×2248)
J
I g
N f
E
(2688×1512)
(4000×2664)
(2688×1792)
(4000×3000) f (2688×2016)
L k (2992×2992) g (2016×2016)
RAW: I E (4000×3000)
P (3456×1944) i (1920×1080) a (3456×2304) i (1920×1280) k (3456×2592) h (1920×1440)
P (2592×2592) i (1440×1440)
RAW: DNG (12 bit)
JPEG: C (Best), D (Better), E (Good)
RAW and JPEG simultaneously recordable sRGB, AdobeRGB
SD, SDHC, and SDXC Memory Cards
Date (100_1018, 100_1019...)/
PENTX (100PENTX, 101PENTX...)
231
LCD Monitor
Type
Size
Dots
Adjustment
Display
TFT color LCD monitor, wide angle viewing
3.0 inches
Approx. 460,000 dots
Brightness and colors adjustable
Field of View: approx. 100%, Grid display (4 × 4 Grid, Golden
Section, Scale display), Bright/dark area warning, Histogram
White Balance
Auto
Preset
Manual
Fine Adjustment
TTL by CMOS image sensor
Daylight, Shade, Cloudy, Fluorescent Light (D: Daylight Color,
N: Daylight White, W: Cool White, L: Warm White), Tungsten,
Flash, f, Manual
Configuration on monitor
Adjustable ±7 steps on A-B axis and G-M axis
Focusing Mechanism
Type Contrast detection AF
Brightness Range
Focus Method
Autofocus Method
AF Assist Light
MF Assist
EV 1 to 18 (ISO100)
AF/MF switching
Face Detection, Tracking, AF Select (25 Points), Select, Spot
Dedicated LED AF assist light
Off/×2/×4
Exposure Control
Type
Metering Range
Exposure Modes
EV Compensation
AE Lock
TTL image sensor metering, multi-segment metering, centerweighted metering, and spot metering
EV 1 to 17 (ISO 100, F1.9 lens), +2 EV with Electronic Shutter enabled, +2 EV using the ND filter
Auto Picture modes: Standard, Portrait, Landscape, Macro,
Night Scene Portrait, Sunset, Blue Sky, Forest
Scene modes: Portrait, Landscape, Macro, Moving Object,
Night Scene Portrait, Sunset, Blue Sky, Night Scene, Night
Scene HDR*, Night Snap, Food, Quick Macro*, Pet, Kids,
Forest, Surf & Snow, HDR*, Backlight Silhouette, Candlelight,
Stage Lighting, Museum
Program, Shutter Priority, Aperture Priority, Manual, Bulb, Blur
Control*
*JPEG only
±3 EV (1/3 EV step)
Can be assigned to the d/i button from the menu.
11
232
Shutter
Aperture
ND Filter
Lens shutter: 1/2000 - 30 seconds (1/3 EV step, 1/8000 - 30 seconds when Electronic Shutter is enabled), Bulb
*When using a lens that has no lens shutter; shooting at 1/8000
- 2 seconds with the electronic shutter is available, Bulb shooting is not available.
From wide open to F8
*Not available when using a lens that has no lens shutter.
Off/On *Not available when using a lens that has no lens shutter.
Drive Modes
Mode Selection
Continuous Shooting
Single frame, Continuous (Hi, Lo), Self-timer (12s, 2s), Remote
Control (0 sec., 3 sec., continuous), Auto Bracketing (3 frames, remote control)
Approx. 5 fps, JPEG (E/C/Continuous Hi): up to 5 frames
Approx. 1.5 fps, JPEG (E/C/Continuous Lo): up to 100 frames
Built-in Flash
Type
Flash Modes
Sync Speed
Flash Exposure
Compensation
Built-in retractable P-TTL flash, Guide number: approx. 7
(ISO200/m), approx. 4.9 (ISO100/m)
Angle of view coverage: equivalent to 28 mm in 35 mm format
P-TTL, Red-eye Reduction, Slow-speed Sync, Trailing Curtain Sync
Lens shutter: 1/2000 seconds, Electronic shutter: 1/13 seconds,
Used with external flash unit: 1/250 seconds
-2.0 to +1.0 EV
11
Capture Functions
Custom Image
Noise Reduction
Dynamic Range
Setting
Lens Correction
Digital Filter
HDR Capture
Multi-exposure
Interval Shooting
Smart Effect
Bright, Natural, Portrait, Landscape, Vibrant, Radiant, Muted,
Bleach Bypass, Reversal Film, Monochrome, Cross Processing
High-ISO NR
Highlight Correction, Shadow Correction
Distortion Correction
Toy Camera, High Contrast, Shading, Slim, HDR, Invert Color,
Extract Color, Color, Water Color, Posterization, Fish-eye
Auto, HDR 1, HDR 2
Number of shots: 2-9, Exposure adjusted automatically.
Shooting interval: 1 sec. to 24 hr., Start Interval setting: immediately, from the set time, Number of shots: up to 999 images
Brilliant Color, Unicolor Bold, Vintage Color, Cross Processing,
Warm Fade, Tone Expansion, Bold Monochrome, Water Color,
Vibrant Color Enhance, USER 1-3
233
Movie
File Format
Recorded Pixels
Sound
Recording Time
Custom Image
Digital Filter
Interval Movie
MPEG-4 AVC/H.264
a (1920×1080, K, 30 fps), b (1280×720, K, 30 fps), c (640×480, I, 30 fps)
Built-in monaural microphone
Up to 25 minutes; automatically stops recording if the internal temperature of the camera becomes high.
Bright, Natural, Portrait, Landscape, Vibrant, Radiant, Muted,
Bleach Bypass, Reversal Film, Monochrome, Cross
Processing
Toy Camera, High Contrast, Shading, Slim, HDR, Invert Color,
Extract Color, Color, Water Color, Posterization, Fish-eye
Recording interval: 1 sec., 5 sec., 10 sec., 30 sec., 1 min., 5 min., 10 min., 30 min., 1 hr., Recording time: 5 sec. to 99 hr.,
Start Interval setting: immediately, from the set time
Playback Functions
Playback View
Delete
Digital Filter
RAW Development
Edit
Single frame, multi-image display (4, 9, 20, 42, 90 segmentation), display magnification (up to 16×, scrolling and quick magnification available), rotating, histogram (Y histogram, RGB histogram), bright/dark area warning, detailed information display, folder display, calendar display, slideshow
Delete single image, delete all images, select & delete, delete folder, delete instant review image
Monochrome, Toy Camera, High Contrast, Shading, Slim,
HDR, Invert Color, Extract Color, Color, Water Color,
Posterization, Fish-eye, Retro, Soft, Sketch Filter, Miniature,
Frame Composite, Starburst, Base Parameter Adjustment
File Format (JPEG), Aspect Ratio, Color Space, Custom
Image, White Balance, Sensitivity, High-ISO NR, Shadow
Correction, Distortion Correction
Resize, Cropping (aspect ratio adjustment available), Index,
Movie Editing (divide or delete selected frames), Capturing a
JPEG still picture from a movie, Red-eye Edit, Save the RAW file data in the buffer memory
Customization
Custom Functions
Mode Memory
Button/Dial
Customization
World Time
13 items
12 items d /i button: Green Button, Preview, One Push File Format,
AE Lock, Enable AF
Quick Dial: Smart Effect, Custom Image, Digital Filter, Aspect Ratio
World Time settings for 75 cities (28 time zones)
11
234
Power Supply
Battery Type
AC Adapter
Battery Life
Rechargeable Lithium-ion Battery D-LI68
AC Adapter Kit K-AC115 (optional)
Number of recordable images (with 50% flash usage): approx.
250 images,
(without flash usage): approx. 270 images
Playback time: approx. 160 minutes
* Tested in compliance with CIPA standard using a new rechargeable lithium-ion battery under the temperature of
23°C. Actual results may vary depending on the shooting conditions/circumstances.
Interfaces
Connection Port
USB 2.0 (high-speed compatible)/AV output terminal, HDMI output terminal (Type D)
USB Connection MSC/PTP
Video Output Format NTSC/PAL
Dimensions and Weight
Dimensions
Approx. 102.0 mm (W) × 58.0 mm (H) × 33.5 mm (D) (excluding the operation parts and protrusion)
Weight
Approx. 200 g (loaded and ready with the dedicated battery and
SD Memory Card), Approx. 180 g (body only)
Accessories
Package Contents
Software
USB Cable I-USB7, Strap O-ST131, Rechargeable Lithium-ion
Battery D-LI68, Battery Charger D-BC68P, AC plug cord,
Software (CD-ROM) S-SW131
<Mounted on the camera>
Hot shoe cover F
K
, Body mount cover
SILKYPIX Developer Studio 3.0 for PENTAX
11
Approximate Image Storage Capacity and Playback Time
When using the fully charged battery
Battery Temperature
Normal
Shooting
270
Flash Photography
50% Use 100% Use
250 240
Playback
Time
160 minutes D-LI68 23°C
The image storage capacity (normal recording and flash use 50%) is based on measuring conditions in accordance with CIPA standards, while other data is based on our measuring conditions. Some deviation from the above figures may occur in actual use depending on the selected capture mode and shooting conditions.
235
Approximate Image Storage Capacity by Size
When using a 2 GB SD Memory Card
Aspect Ratio
K
J
I
L
Recorded Pixels k (4000×2248)
P (3456×1944) g (2688×1512) i (1920×1080)
N (4000×2664) a (3456×2304) f (2688×1792) i (1920×1280)
E (4000×3000) k (3456×2592) f (2688×2016) h (1920×1440) k (2992×2992)
P (2592×2592) g (2016×2016) i (1440×1440)
C
JPEG Quality
D
561
845
1263
2115
503
629
998
2115
418
561
998
1510
561
845
1263
2115
1067
1607
2402
4020
957
1196
1897
4020
796
1067
1897
2871
1067
1607
2402
4020
RAW
–
–
–
90
–
–
–
85
–
–
–
–
88
90
–
–
E
1797
2708
4046
6772
1613
2015
3196
6772
1341
1797
3196
4837
1797
2708
4046
6772
* The maximum number of recordable images is 65,535 images, regardless of the amount of available space on the SD Memory Card.
* The number of storable images may vary depending on the subject, shooting conditions, selected capture mode and SD Memory Card, etc.
11
236
Index
11
Symbols
................................... 19, 21, 59
........................... 19, 21, 60, 138
................................... 19, 21, 77
[A Rec. Mode] menu .... 63, 217
[C Movie] menu .... 65, 105, 218
[Q Playback] menu .... 147, 219
[R Set-up] menu ......... 178, 220
....................................... 65, 221
U Standard ........................... 68 c
Portrait ........................ 68, 69
Landscape .................. 68, 69
Macro .......................... 68, 69
Night Scene Portrait ... 68, 69
Sunset ....................... 68, 69
Blue Sky .................... 68, 69
Forest ......................... 68, 69
\ Moving Object ................... 69
A Night Scene ...................... 69
Z Night Scene HDR ............ 69 l Night Snap ........................ 69
K Food .................................. 69 w Quick Macro ................... 69
Z Pet .................................... 69
R Kids .................................... 69
Q Surf & Snow ..................... 69
y Backlight Silhouette ......... 70
U Candlelight ........................ 70 n Stage Lighting .................. 70
E Museum ........................... 70
C Movie .............................. 107
A
AC adapter ............................. 40
Action in M Mode ..................141
Adding the date (DPOF) .......197
AdobeRGB ...........................119
AE Lock ..................................80
AE Metering ............................82
AF area ...................................87
AF Assist Light .................17, 85
= (Autofocus) ......................84
AF frame .................................53
AF Select (25 Points) .............85
Exposure mode c .................74
.....................105, 116, 117, 167
.........................................52, 68
Auto Flash ..............................55
.........................................52, 68
Auto Power Off .....................184
F (White Balance) .........120
Autofocus = .........................84
Autofocus Method ..................85
c (Aperture Priority Automatic
Exposure) mode .....................74
AV device .............................161
B
Backlight Silhouette y ..........70
Filter) ....................................169
Battery ....................................37
u (Blur Control) mode ..........71
.............................................126
Blue Sky d .....................68, 69
Blur Control mode u ............71
Bold Monochrome (Smart Effect)
............................................. 134
Bracketing shooting ............... 78
Bright (Custom Image) ......... 126
Bright areas ................... 28, 123
............................. 148, 185, 187
Brightness adjustment ......... 123
Brilliant Color (Smart Effect)
............................................. 134
Built-in flash ........................... 55
h (Bulb) .......................... 76
Bulb shooting ......................... 76
C
Calendar display .................. 152
Camera shake ............... 93, 106
Candlelight U ........................ 70
Capture mode ........................ 67
Card access lamp .................. 17
Center-weighted metering ..... 82
Charging the battery .............. 37
City ....................................... 183
Cleaning the sensor ............. 224
Cloudy (White Balance) ....... 120
Color (Digital Filter) ...... 130, 168
Color adjustment .................. 187
Color Space ......................... 119
Computer ............................. 199
Connection cable cover ......... 40
Continuous Autofocus ............ 90
Continuous playback ........... 155
Continuous Shooting ............. 99
Contrast (Custom Image) .... 127
Control panel ................... 24, 31
Correcting distortion ............. 143
Creating new folders ............ 195
Cropping images .................. 167
Image) .................................. 126
237
Cross Processing (Smart Effect)
.............................................134
f (White Balance) ...........120
Custom Image ......................126
.......................................65, 221
D
Dark areas ......................28, 124
Date Adjustment .............48, 181
Daylight (White Balance) ......120
Default settings .....................216
Delete .............................60, 158
Delete all images ..................160
Delete folder .........................159
Deleting single image .............60
Depth of field ....................71, 92
Destination ...........................181
Detailed information display ...27
Developing Raw images .......174
Digital Filter ..................130, 168
Direct keys ................30, 62, 216
Discharge ...............................55
Display language ..................184
Distortion Correction .............143
DPOF ...................................196
D-Range Setting ...................124
Drive Mode .............................62
DST ................................48, 182
Dust Removal .......................224
Dynamic Range ....................123
E
E-dial ................................19, 21
E-dial in Program ..................140
Effect ....................................134
Electronic Shutter .................222
Enable AF ...............................88
.....................................149, 187
Error messages ....................225
EV Compensation ..................77
11
238
11
................................... 19, 21, 77
Exposure ................................ 73
Exposure Bracketing .............. 78
Exposure mode ...................... 74
Exposure Setting ................. 106
External flash ....................... 211
Extract Color (Digital Filter)
..................................... 130, 168
F
Method) .................................. 85
File Format ........................... 117
Filter ............................. 130, 168
............................................. 128
Firmware .............................. 191
Firmware Version Info .......... 191
..................................... 130, 169
Flash .............................. 55, 207
Flash (White Balance) ......... 120
............................................... 56
Flash Off ................................ 55
Flash On ................................ 55
Flash pop-up switch ......... 19, 57
Flicker Reduction ................... 29
Balance) ............................... 120
Focus Lock ............................ 89
Focus Method ........................ 84
Focus Peaking ....................... 91
Focus Settings ....................... 85
Focusing ................................ 84
Focusing ring ......................... 90
Folder display ...................... 151
Folder Name ........................ 195
Food K .................................. 69
Forest x ......................... 68, 69
Format ..................................193
.............................19, 21, 30, 62
Frame Composite (Digital Filter)
.............................................169
Frame rate ............................105
G
...........................19, 21, 60, 138
Guide Display .................67, 185
Guide indicators .....................29
Guide number .......................209
H
HDMI output format ..............163
HDMI terminal ......................161
p .......................................69
HDR (Digital Filter) .......130, 168
HDR Capture ........................125
High Contrast (Digital Filter)
.....................................130, 168
.............................................125
Image) ..................................127
High-ISO NR ..........................83
Highlight Correction ..............123
Histogram .........26, 28, 185, 187
Hometown ............................181
Hot shoe .................................17
Hue (Custom Image) ............127
I
Image Capture Settings ........116
Image finishing tone .............126
Image Rotation .....................157
Image storage capacity ........235
Index .....................................153
button .........19, 21, 22, 25
Initial settings ..........................47
Initializing a memory card .....193
Input Focal Length ............... 223
Installing software ................ 203
Instant Review ............... 53, 186
Interval Movie ...................... 109
Interval Shooting .................. 101
..................................... 130, 168
ISO sensitivity ........................ 73
J
JPEG ................................... 117
JPEG Quality ....................... 119
JPEG Recorded Pixels ........ 118
K
Kids R .................................... 69
L
Landscape s .................. 68, 69
............................................. 126
Language setting ........... 47, 184
LCD Display Settings ........... 187
LCD View Options ............... 185
Leading Curtain Sync .......... 209
Lens ............................... 44, 222
Lens information contacts ...... 17
Lens mount index .................. 44
Lens unlock button ................. 45
Locking the exposure ............. 80
Locking the focus ................... 89
M
............................................... 74
Macintosh ............................ 200
Macro b .......................... 68, 69
Manual focus \ ............ 84, 90
Manual White Balance ......... 122
Memory ................................ 189
Memory Card ......................... 42
3 button ............ 19, 21, 32
239
Menu operation ......................32
Menu tab display ..................186
Metering method ....................82
MF Assist ................................90
\ (Manual focus) ...........84, 90
Microphones ...........................17
Miniature (Digital Filter) ........169
Mode dial ..........................19, 67
Monitor ...........................22, 187
.............................................126
.............................................168
Movie ....................................105
Movie Editing ........................112
[C Movie] menu .....65, 105, 218
Movie SR ..............................106
Moving Object \ ...................69
MSC .....................................201
Multi-exposure ......................103
Multi-image display ...............150
Multi-segment metering ..........82
Museum E ............................70
Muted (Custom Image) .........126
N
Natural (Custom Image) .......126
ND Filter ...............................142
Night Scene A .......................69
Night Scene HDR Z .............69
Night Scene Portrait . ....68, 69
Night Snap l .........................69
Noise Reduction .....................83
NTSC ....................................162
O
4 button ........................19, 21
One Push File Format ..........139
P
Exposure) mode .....................74
11
240
11
PAL ...................................... 162
PC/AV terminal ............ 161, 202
Pet Z .................................... 69
Pixel Mapping ...................... 188
Pixels ........................... 105, 118
Playback ................................ 59
................................... 19, 21, 59
[Q Playback] menu .... 147, 219
..................................... 146, 219
Playing back movies ............ 111
Portrait c ........................ 68, 69
Portrait (Custom Image) ...... 126
Posterization (Digital Filter)
..................................... 130, 169
Power Saving ....................... 184
Power supply ......................... 46
Power switch .............. 19, 21, 46
Preview .......................... 92, 138
Printing ................................. 196
Product registration .............. 205
Program Automatic Exposure mode e ................................. 74
Protect ................................. 194
Provided software ................ 203
PTP ...................................... 201
P-TTL (Auto Flash) .............. 212
Q
Quality Level ........................ 119
Quick dial ....................... 19, 132
Quick Macro w .................. 69
Quick Zoom ......................... 148
R
............................................. 126
RAW .................................... 117
RAW Development .............. 174
[A Rec. Mode] menu .... 63, 217
Recorded Pixels ........... 105, 118
Red-eye Edit .........................173
Red-eye Reduction .........55, 212
Release-priority ......................86
Remote Control ......................96
Remote control receiver .........17
Reset ....................................190
Resize ..................................166
Retro (Digital Filter) ..............169
.............................................126
Rotation ................................157
S
.............................................127
Save Cross Processing ........129
Save RAW data ................26, 59
Save Settings .......................136
Save Thumbnail ...................137
Saving frequently used functions
.............................................132
H (Scene) mode .................69
SD Memory Card ....................42
Select & Delete .....................158
Select (Autofocus Method) .....85
Self-timer ................................95
Self-timer lamp .......................17
Sensitivity ...............................73
[R Set-up] menu ..........178, 220
Shade (White Balance) ........120
Shading (Digital Filter) ..130, 168
Shadow Correction ...............124
Shake Reduction ....................93
.............................................127
Shooting information ..............22
Show Grid .............................185
...............................................74
Exposure mode b ................ 74
Shutter release button ..... 19, 21
............................................. 203
Sketch Filter (Digital Filter)
............................................. 169
Slideshow ............................ 155
Slim (Digital Filter) ....... 130, 168
Slow-speed Sync ........... 55, 208
Smart Effect ......................... 134
Soft (Digital Filter) ................ 169
Software ............................... 203
Sound .................................. 105
Sound Effects ...................... 180
Speaker ................................. 17
Specifications ....................... 230
Spot (Autofocus Method) ....... 85
Spot metering ........................ 82
sRGB ................................... 119
Stage Lighting n .................. 70
Standard U ........................... 68
Standard display .............. 22, 25
Starburst (Digital Filter) ........ 169
Strap ...................................... 36
Sunset K ....................... 68, 69
Surf & Snow Q ..................... 69
T
L (Shutter & Aperture Priority
Automatic Exposure) mode ... 74
............................................. 134
Toning (Custom Image) ....... 128
..................................... 130, 168
............................................... 85
Trailing Curtain Sync ..... 55, 209
Tungsten (White Balance) ... 120
Exposure) mode .....................74
U
.............................................134
Updating software ................191
USB Connection ...................201
USB Connection mode .........201
USER ...................................136
V
Vibrant (Custom Image) .......126
Effect) ...................................134
Video Output Format ............162
Video terminal ......................161
.............................................134
W
.............................................134
.....................................130, 168
Water Color (Smart Effect) ...134
White Balance ......................120
Windows ...............................200
World Time ...........................181
Write-protect .............................5
Z
Zoom display ........................149
Zoom lens ...............................54
241
11
242
WARRANTY POLICY
All PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by nonauthorized PENTAX service facilities.
11
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there are no representatives of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner.
If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when
required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
243
The CE Mark is a Directive conformity mark of the European
Union.
11
244
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
11
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply.
The lithium battery used in this camera contains perchlorate material, which may require special handling.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
245
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: PENTAX RICOH IMAGING AMERICAS
CORPORATION
Located at: 633 17 Street, Suite 2600
Denver, Colorado 80202 U.S.A.
Phone: 800-877-0155 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: Digital Single Lens Camera
Model Number: Q10
Contact person: Customer Service Manager
Date and Place: September, 2012, Colorado
11
246
Information for Users on Collection and Disposal of Old
Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste.
Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
By disposing of these products correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal
(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery
Directive.
For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.
11
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don't purchase a new product.
Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
Memo
Memo
Thank you for purchasing this PENTAX Q10 Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions.
Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
Lenses you can use
Lenses that can be used with this camera are Q-mount lenses.
Regarding copyrights
Images taken with the PENTAX Q10 that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the
Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the United States of America and other countries.
Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc., registered in the U.S. and other countries.
Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
SDXC Logo is a trademark of SD-3C, LLC.
This product includes DNG technology under license by Adobe Systems Incorporated.
The DNG logo is either a registered trademark or trademark of Adobe Systems
Incorporated in the United States and/or other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.
All other brands or product names are trademarks or registered trademarks of their respective companies.
This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not
PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved. PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.
This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
Memo
PENTAX RICOH IMAGING CO., LTD.
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX RICOH IMAGING
FRANCE S.A.S.
(European Headquarters)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(HQ - http://www.pentax.eu)
(France - http://www.pentax.fr)
PENTAX RICOH IMAGING
DEUTSCHLAND GmbH
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(http://www.pentax.de)
PENTAX RICOH IMAGING
UK LTD.
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX RICOH IMAGING
AMERICAS CORPORATION
633 17th Street, Suite 2600, Denver, Colorado 80202,
U.S.A.
(http://www.pentaximaging.com)
PENTAX RICOH IMAGING
CANADA INC.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
PENTAX RICOH IMAGING
CHINA CO., LTD.
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032, CHINA
(http://www.pentax.com.cn) http://www.pentax.jp/english
Digital Camera
Operating Manual
• Specifications and external dimensions are subject to change without notice.
58282 Copyright © PENTAX RICOH IMAGING CO., LTD. 2012
R01DTI12 Printed in Philippines
To ensure the best performance from your camera, please read the Operating Manual before using the camera.
Lataa
Julkinen linkki päivitetty
Chattisi julkinen linkki on päivitetty. You may view and manage your chat links after registration here.
Dokumentin julkinen linkki
Mainos