Setting the Lens Functions. Pentax 12195, 12161, Q10, Q 10
विज्ञापन
विज्ञापन
142
Setting the Lens Functions
You can set the lens functions. Depending on the type of the lens attached, available functions differ.
5
Setting the ND Filter
Sets whether to use the ND filter built-in to the lens.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [ND Filter],
and press the 4 button.
The [ND Filter] screen appears.
3
Use the four-way controller (45) to select [Off] or [On], and press
the 4 button.
The camera returns to the control panel.
MENU
• You can also change the setting from the [A Rec. Mode 1] menu.
• This function is fixed to [Off] when an ND filter is not built in to the lens.
OK
143
Correcting Lens Distortion
Reduces lens distortions occurring due to lens properties.
1
Select [Distortion Correction] in the [A Rec. Mode 2]
menu, and press the four-way controller (5).
2
Use the four-way controller (23) to select [On] or [Off], and press
the 4 button.
1 2 3
Interval Shooting
D-Range Setting
MENU OK
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
The effects of the Distortion Correction function may be barely noticeable in some cases depending on the shooting conditions and other factors.
5
144
Memo
6
Playback Functions
This chapter describes how to use the various playback functions.
Playback Functions Operation ......................... 146
Setting the Playback Display Method .............. 148
Enlarging Images ............................................... 149
Displaying Multiple Images ............................... 150
Displaying Rotated Images ............................... 157
Deleting Multiple Images ................................... 158
डाउनलोड
विज्ञापन