Pentax Optio W80 digital camera Operating Manual
Iklan
Iklan
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the product’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used in the display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
• A band of light may appear on the display if the camera is aimed at a bright subject. This is known as a smear, but it is not a malfunction.
• There is a possibility that the illustrations and the display screen in this manual are different from the actual product.
• In this manual, both an SD Memory Card and an SDHC Memory Card are referred to as SD Memory Cards hereafter.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a Macintosh hereafter.
Using Your Camera Safely
We have paid close attention to the safety of this product. When using this product, we request your special attention regarding items marked with the following symbols.
Warning
This symbol indicates that violating this item could cause serious personal injuries.
Caution
This symbol indicates that violating this item could cause minor or medium personal injuries, or loss of property.
1
2
About the Camera
Warning
• Do not attempt to take the camera apart or modify the camera. High voltages are present within the camera, and there is a danger of electric shock if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for example, the camera being dropped, please do not under any circumstances touch such exposed portions, as there is a danger of receiving an electric shock.
• Wrapping the strap of the camera around your neck is also dangerous.
Please take care that small children do not hang the strap around their necks.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest PENTAX Service Center. Continuing to use the product can cause a fire or electric shock.
Caution
• Do not place your finger on the flash when it is discharging as there is a risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a risk of discoloring.
• Some portions of the camera heat up during use, so please take care, as there is a risk of low temperature burns if such portions are held for long periods of time.
• Should the LCD be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin, in your eyes, or in your mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About the Battery Charger and the AC Adapter
Warning
• Always use the battery charger and AC adapter exclusively developed for this product, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this product, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100-
240V AC.
• Do not disassemble or modify the product. This can cause a fire or electric shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue its use and consult a
PENTAX Service Center. Continuing to use the product can cause a fire or electric shock.
• If water should happen to get inside the product, consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electric shock.
• If a thunder storm should occur while using the battery charger or AC adapter, unplug the AC plug cord and discontinue use. Continuing to use the product can cause damage to the equipment, fire, or electric shock.
• Wipe off the plug of the AC plug cord if it becomes covered with dust. Dust on the plug may cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to drop onto it or allow the AC plug cord to become damaged due to excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
• Do not short or touch the output terminals of the product while it is still plugged in.
• Do not plug in the AC plug cord with wet hands. This can cause an electric shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a malfunction.
• Do not use the battery charger to charge a battery other than a rechargeable lithium-ion battery D-LI78. This can cause overheating, explosion, or battery charger failure.
3
4
• To reduce the risk of hazards, use only a CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing it in their mouths may cause an electric shock.
• If any leakage from the battery should come in contact with your eyes, it may cause a loss of sight. Flush your eyes with clean water and get medical attention immediately. Do not rub them.
Caution
• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.
• The battery should be inserted correctly, observing (+) and (-) marks on the battery and the camera. Inserting the battery incorrectly may cause an explosion or fire.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.
• If any leakage from the battery should come in contact with skin or clothes, it may cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI78 Battery Usage:
- USE SPECIFIED CHARGER ONLY.
- DO NOT INCINERATE.
- DO NOT DISASSEMBLE
- DO NOT SHORT CIRCUIT
- DO NOT EXPOSE TO HIGH TEMP.(140°F/60°C)
About SD Memory Cards
Warning
• To avoid the risk of SD Memory Cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an SD Memory Card is accidentally swallowed.
Care to be Taken During Handling
Before Starting Use
• When traveling, take the Worldwide Service Network listing that is included in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or during traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
About the Battery and Battery Charger
• Storing the battery fully charged may decrease the battery performance.
Avoid storing it especially in high temperatures.
If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s service life.
• Charging the battery a day before use or on the day of use is recommended.
• The AC plug cord supplied with the camera is for exclusive use with the battery charger D-BC78. Do not use it with any other equipment.
Cautions when Carrying and Using the Camera
• Hot and humid places should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside.
• Ensure that the camera is not subjected to substantial vibrations, shocks, or pressure as this may cause damage, malfunction, or a loss in waterproof performance. Place the camera on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, ship, etc. If the
5
6 camera is subjected to substantial vibrations, shocks, or pressure, take your camera to your nearest PENTAX Service Center and have it checked.
• The temperature range in which the camera can be used is -10°C to 40°C
(14°F to 104°F).
• The liquid crystal display will become black at high temperatures but will return to normal at normal temperatures.
• The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a malfunction.
• If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera. Therefore put the camera in a bag or plastic bag and take the camera out when the difference in temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts.
These could cause the camera to breakdown. Wipe dry any rain or water drops on the camera.
• Please do not press forcefully on the display. This could cause it to break or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera.
About Repairs
• Do not clean the product with organic solvents such as thinner, alcohol or benzene.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.
About Storage
• Avoid storing the camera where pesticides and chemicals are handled.
Remove the camera from its case and store it in a well-ventilated place to prevent the camera from becoming moldy during storage.
Regarding Waterproof, Dustproof, and Shockproof Design
• This camera is provided with a waterproof/dustproof design complying with
JIS waterproof grade 8 and JIS dustproof grade 6 (equivalent to IP68).
• The camera satisfies the PENTAX drop test (1 m height onto a 5 cm thick plywood surface) complying with MIL-Standard 810F Method 516.5-Shock testing.
• Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit.
• The camera is not guaranteed to be free of trouble or damages under every condition.
• To enhance the waterproof performance of the camera, the front of the lens is protected by glass. As any dirt or water on the glass will affect the quality of pictures taken, the glass should be kept clean at all times.
• Leaving the camera on the sand at the beach may cause the camera to exceed its operating temperature or cause the speaker or microphone to become blocked with sand.
• The camera will sink if dropped in water, so be sure to attach the strap and slip the strap over your wrist when using the camera in or near water.
• Be sure to check that the battery/card/terminal cover is securely locked before using the camera in an environment where it is likely to get wet or dirty, such as underwater or at the beach. Water, sand or dirt inside the camera may cause failure of the camera. Wipe off any water or dirt with a dry cloth as soon as possible after using the camera.
• Avoid opening the battery/card/terminal cover at the beach or by the sea.
Wait until the camera is completely dry before changing the battery or the
SD Memory Card. Avoid changing the battery or card where the camera is likely to get wet or dirty, and make sure that your hands are dry.
• If the camera is very dirty or after it has been used in the sea, make sure that it is turned off and the battery/card/terminal cover is firmly closed before rinsing it under running tap water or leaving it in a bowl of clean water for a short time (2 or 3 minutes).
• Avoid cleaning with agents such as soapy water, mild detergents, or alcohol as this may compromise the waterproof performance of the camera.
• Wipe off any dirt or sand on the waterproof packing or the packing contact surface. The camera’s waterproof performance may be compromised by loose packing or cracks or dents in the packing or packing contact surface.
If there is any such damage, contact your nearest PENTAX Service
Center.
7
8
• To maintain the waterproof performance of the camera, you are recommended to change the waterproof packing once a year. Contact your nearest PENTAX Service Center regarding changing the packing. (A charge will be made.)
• Avoid subjecting the camera to substantial vibrations, shocks, or pressure as this may cause a loss in waterproof performance. If the camera is subjected to substantial vibrations, shocks or pressure, take your camera to your nearest PENTAX Service Center and have it checked.
• Avoid getting sunscreen or sun oil on the camera as it may cause discoloration of the surface. If any oil gets on the camera, wash it off immediately with warm water.
• The camera’s accessories are not waterproof.
Others
• Periodic checks are recommended every 1 to 2 years in order to maintain high performance.
• Refer to “Precautions When Using an SD Memory Card” (p.41) regarding
the SD Memory Card.
• Please note that formatting an SD Memory Card or the built-in memory will delete all data; however it may still be possible to recover that data using off-the-shelf data recovery software. Please manage your camera memory at your own risk.
Contents
Using Your Camera Safely ...............................................................1
Care to be Taken During Handling ...................................................5
Composition of the Operating Manual ............................................15
Camera Features.................................................................................16
Checking the Contents of the Package ..........................................20
Names of Parts...............................................................................21
Names of Operating Parts ..............................................................22
Monitor Indications .........................................................................23
Attaching the Strap.............................................................................32
Powering the Camera .........................................................................33
Charging the Battery.......................................................................33
Installing the Battery .......................................................................34
Using the AC Adapter.....................................................................37
Installing the SD Memory Card..........................................................39
Number of Images Recordable on an SD Memory Card................42
Turning the Camera On and Off ........................................................43
Starting-up in the Playback Mode...................................................44
Setting the Display Language.........................................................45
Setting the Date and Time..............................................................49
Understanding the Button Functions ...............................................52
A Mode .........................................................................................52
Q Mode ........................................................................................54
Switching Between A Mode and Q Mode...................................56
Setting the Camera Functions ...........................................................57
Operating the Menus ......................................................................57
Menu List ........................................................................................61
Taking Still Pictures............................................................................66
Taking Pictures...............................................................................66
Setting the Shooting Mode .............................................................70
Using the Face Recognition Function.............................................73
9
10
Taking Pictures Automatically (Auto Picture Mode) .......................75
Setting the Functions (Program Mode)...........................................77
Taking Pictures in the Basic Mode (Green Mode)..........................78
Using the Zoom ..............................................................................79
Taking Pictures of Dark Scenes (Night Scene, Night Scene
Portrait, Digital SR, Fireworks, and Candlelight Modes) ..........82
Taking Pictures of People (Half-length Portrait/Portrait Mode).......83
Taking Pictures of Children (Kids Mode) ........................................85
Taking Pictures of Your Pet (Pet Mode) .........................................86
Taking Pictures of Sports and Leisure Activities
(Surf & Snow/Sport Mode) .......................................................87
Taking Pictures of Text (Text Mode) ..............................................88
Framing Your Pictures (Frame Composite Mode)..........................90
Using the Self-timer ........................................................................92
Taking a Series of Pictures (Continuous Shooting/
Burst Shooting) ........................................................................93
Taking Pictures at a Set Interval (Interval Shoot) ...........................95
Taking Pictures with Automatic Exposure Adjustment
(Auto Bracket) ..........................................................................97
Using the Digital Wide Function (Digital Wide Mode).....................98
Taking Panoramic Pictures (Digital Panorama Mode)..................100
Setting the Shooting Functions.......................................................103
Selecting the Flash Mode .............................................................103
Selecting the Focus Mode ............................................................105
Selecting the Autofocus Settings..................................................107
Setting the Image Tone ................................................................111
Setting Pixel Track SR..................................................................112
Selecting the Number of Recorded Pixels....................................113
Selecting the Quality Level of Still Pictures ..................................115
Adjusting the White Balance.........................................................116
Setting the AE Metering................................................................118
Setting the Sensitivity ...................................................................119
Setting ISO Correction in AUTO...................................................120
Setting the Exposure (EV Compensation)....................................121
D-Range Setting ...........................................................................122
Setting the Interval Shooting ........................................................124
Setting Blink Detection .................................................................126
Setting the Instant Review............................................................126
Setting the Image Sharpness (Sharpness)...................................127
Setting the Saturation/Tone Adjustment.......................................128
Setting the Image Contrast (Contrast)..........................................128
Setting the Date Imprint Function .................................................129
Setting the Green Button ..............................................................130
Taking Pictures Underwater ............................................................134
Taking Underwater Pictures (Underwater Mode/Underwater
Movie Mode) ..........................................................................134
Recording Movies .............................................................................136
Recording Movies.........................................................................136
Setting the Movie SR (Movie Shake Reduction) Function............139
Recording a Movie from Pictures Taken at a Set Interval
(Interval Movie) ......................................................................140
Saving the Settings (Memory) .........................................................143
Playing Back and Deleting Images 145
Playing Back Images ........................................................................146
Playing Back Still Pictures ............................................................146
Playing Back a Movie ...................................................................147
Multi-Image Display ......................................................................148
Using the Playback Function ........................................................150
Slideshow .....................................................................................153
Rotating the Image .......................................................................156
Zoom Playback.............................................................................157
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback)......................................................158
Deleting Images and Sound Files....................................................160
Deleting a Single Image/Sound File .............................................160
Deleting Selected Images and Sound Files..................................162
Deleting All Images and Sound Files............................................163
Recovering Deleted Images .........................................................164
Protecting Images and Sound Files from Deletion (Protect) ........165
Connecting the Camera to AV Equipment......................................168
Editing and Printing Images 171
Editing Images ..................................................................................172
Changing the Image Size (Resize)...............................................172
Cropping Images ..........................................................................173
Using the Digital Filters.................................................................175
Red-eye Compensation................................................................179
Adding a Frame (Frame Composite) ............................................180
Editing Movies ..............................................................................183
Copying Images and Sound Files.................................................185
11
12
Setting the Printing Service (DPOF)................................................187
Printing a Single Image ................................................................187
Printing All Images........................................................................189
Recording and Playing Back Sound 191
Recording Sound (Voice Recording Mode)....................................192
Setting Voice Recording ...............................................................192
Recording Sounds ........................................................................193
Playing Back Sound .....................................................................194
Adding a Voice Memo to Images.....................................................196
Recording a Voice Memo .............................................................196
Playing Back a Voice Memo.........................................................197
Camera Settings................................................................................200
Formatting an SD Memory Card...................................................200
Changing the Sound Settings.......................................................201
Changing the Date and Time........................................................203
Setting the Alarm ..........................................................................205
Setting the World Time .................................................................208
Changing the Display Language ..................................................211
Changing the Rule for Naming Folders ........................................212
Changing the Video Output Format..............................................213
Adjusting the Brightness of the Display ........................................214
Using the Power Saving Function ................................................215
Setting Auto Power Off .................................................................216
Setting the Quick Zoom Function .................................................217
Setting the Guide Display .............................................................218
Perform Pixel Mapping .................................................................219
Changing the Start-up Screen ......................................................220
Resetting to Default Settings (Reset) ...........................................221
Displaying the Clock Mode ...........................................................222
Setting Up Your Computer...............................................................224
Provided Software ........................................................................224
System Requirements ..................................................................225
Installing the Software ..................................................................226
Setting the Camera USB Connection Mode .................................230
Connecting to a Windows PC ..........................................................232
Connecting the Camera and a Windows PC ................................232
Transferring Images .....................................................................233
Disconnecting the Camera from Your Windows PC.....................236
Starting “ACDSee for PENTAX 3.0” .............................................237
Viewing Images ............................................................................238
Details on How to Use “ACDSee for PENTAX 3.0” ......................239
Connecting to a Macintosh ..............................................................240
Connecting the Camera and a Macintosh ....................................240
Transferring Images .....................................................................241
Disconnecting the Camera from Your Macintosh .........................241
Starting “ACDSee 2 for Mac”........................................................242
Viewing Images ............................................................................243
Details on How to Use “ACDSee 2 for Mac”.................................243
Functions Available for Each Shooting Mode................................246
Troubleshooting................................................................................253
Default Settings.................................................................................255
List of World Time Cities..................................................................260
Optional Accessories .......................................................................261
Main Specifications ..........................................................................262
Warranty Policy.................................................................................266
13
In this manual, the method for operating the four-way controller is shown in illustrations, such as in the one below.
2 or
or 4 5 or
3 or
14
The meanings of the symbols used in this Operating Manual are explained below.
1 Indicates the reference page number for an explanation of the related operation.
Indicates information that is useful to know.
A Mode
Q Mode
Indicates precautions to be taken when operating the camera.
This is the mode for taking still pictures and movies. In this manual, “Still Picture Capture Mode” is the mode for taking still pictures while “C mode” is the mode for taking movies.
This is the mode for viewing still pictures and playing back movies and sound files.
Composition of the Operating Manual
This Operating Manual contains the following chapters.
1 Getting Started –––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera before you start taking pictures. Be sure to read it and follow the instructions.
2 Common Operations ––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as the functions of the buttons and how to use the menus. For more details, refer to the respective chapters below.
3 Taking Pictures ––––––––––––––––––––––––––––––––––––––––
This chapter explains the various ways of capturing images and how to set the relevant functions.
4 Playing Back and Deleting Images–––––––––––––––––––––––––
This chapter explains how to view still pictures and movies on the camera or on a TV and how to delete images, sound files, and movies from the camera.
5 Editing and Printing Images ––––––––––––––––––––––––––––––
This chapter explains the various ways of printing still pictures and how to edit images with the camera.
6 Recording and Playing Back Sound –––––––––––––––––––––––
This chapter explains how to record sound files or add sound (a voice memo) to an image and how to play back sound files.
7 Settings –––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains how to set camera-related functions.
8 Connecting to a Computer –––––––––––––––––––––––––––––––
This chapter explains how to connect the camera to a computer, and includes installation instructions and a general overview of the provided software.
9 Appendix––––––––––––––––––––––––––––––––––––––––––––––
This chapter deals with troubleshooting and lists the optional accessories.
1
2
3
4
5
6
7
8
9
15
Camera Features
16
In addition to basic picture-taking, the Optio W80 has a variety of shooting modes to suit different situations. This section describes how to make the most of the key features of your camera. Together with the explanations of camera operations, it will enable you to enjoy your camera to the fullest.
Forget Your Worries About Water Getting in the
Camera!
The Optio W80 is both waterproof and dustproof. The waterresistant coating on the lens cover glass enables you to take pictures underwater for two hours at a depth of 5 meters (approx.
16.6 ft.). It also allows the camera to be sprayed by water, and you can use the camera in locations where it will be exposed to dust and dirt such as beaches, kitchens, or workshops. Because it utilizes a lock mechanism for the battery/card/terminal cover, when the cover is firmly locked, you can use it underwater with the knowledge that the batteries and card are also secure. The camera’s impact resistance(*) performance satisfies PENTAX’s independent standard for impact resistance, so it can be used in a wide variety of outdoor activities.
* The camera satisfies the PENTAX drop test (1 m height onto a 5 cm thick plywood surface) complying with MIL-Standard 810F Method
516.5-Shock testing.
• Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit.
• The camera is not guaranteed to be free of trouble or damages under every condition.
For taking pictures while snorkeling (p.134).
For taking pictures at the pool or while playing in a river or lake.
For taking pictures while enjoying various outdoor activities without worrying about your camera getting a bit dirty. A quick wipe with a wet cloth is all it needs!
Easy-to-Navigate Capture and Playback Functions!
The user-friendly design of the Optio
W80 enables easy operation with only a few buttons. Simply by choosing the appropriate icon, you
can select the shooting mode (p.71)
and choose the optimal settings for the situation, or the playback mode
playback and editing functions. A guide on the display lets you check the functions available in each mode and how to use them.
XX
XX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXX
XX
A shooting mode guide is displayed in the Capture Mode
Palette and a playback mode guide in the Playback Mode
Use the Green Mode to take pictures easily using standard
Perfect Size for Carrying Around With You!
The Optio W80 features a sporty and sharp design with excellent portability which make it feel more like a cell phone. It will easily slip into a pocket in your bag or hang round your neck, so you’ll always have it with you. Quickly check the time with
the convenient “Clock Mode” (p.222).
17
Perfect for Portrait Shots!
The Optio W80 comes with a “Face Recognition” function that spots the faces in your shot and automatically adjusts the focus and exposure for the faces. It can recognize up to 32 people per shot (*), so it will help you take perfect group shots too. It will automatically release the shutter when people are smiling, or if anyone blinked, it will tell you that so you can take the shot again until it is perfect. It also has a feature that lets you enlarge each person’s face in sequence during playback so you can quickly check their facial expressions.
* Up to 31 face recognition frames are displayed on the monitor (30 in the Half-length Portrait mode).
Face Recognition function (p.73).
Modes for taking stunning pictures of people (p.83).
Close-ups of people’s faces for easy checking during
Add Various Frames to Your Pictures!
When you take a picture with the Optio
W80, you can choose from a wide range of fun frames to create attractive framed
shots (p.90). You can also add frames to
pictures you have taken. Adjust the position of the subject in the picture or reduce or enlarge the picture size to match the frame shape and size. Now you no longer have to worry about the
subject not fitting into the frame (p.180).
For decorating your pictures with a frame.
18
Display Images and Sound Files in Calendar Format!
With the Optio W80, you can display recorded images and sound files by
date in calendar format (p.150). This lets you quickly find the image or
sound file you want to play back.
Advanced Movie Recording Functions!
The Optio W80 includes Movie SR to reduce camera shake during movie
recording (p.139). It also supports 1280×720 HDTV so you can view
your recordings as stunning wide-screen movies.
Use the camera to shoot fun-filled movies of your children or pets as a visual diary of their development
A Multitude of Functions inside the Camera for
Enjoying Images Without a Computer!
The Optio W80 has a variety of functions to let you enjoy playing back and editing images without having to connect the camera to your computer and transfer the images first. The camera is all you need to take and edit still
pictures and movies (p.172). And
no more worries about accidentally deleting images, because now, with the Optio
W80, you can recover them again
Resize (p.172), Cropping (p.173) and Red-eye
Compensation (p.179) can be used, while the image is
displayed in the playback mode.
You can divide a movie in two or select a frame from a
movie to save it as a still picture (p.183).
19
Checking the Contents of the Package
Camera
Optio W80
Strap
O-ST20 (*)
Software (CD-ROM)
S-SW87
USB cable
I-USB7 (*)
AV cable
I-AVC7 (*)
Rechargeable lithium-ion battery D-LI78 (*)
Battery charger
D-BC78 (*)
AC plug cord Operating Manual
(this manual)
20
Quick Guide
Items marked with an asterisk (*) are also available as optional accessories.
The battery charger and AC plug cord are only sold as a set (battery charger kit
K-BC78).
For other optional accessories, refer to “Optional Accessories” (p.261).
Names of Parts
Front
Power switch/
Power lamp (green)
Shutter release button Speaker
Microphone
Flash
Self timer lamp/
Focus assist
Lens
Back
Battery/card/ terminal cover
Battery/card/ terminal cover lock lever
Display
Tripod socket
PC/AV terminal
Battery lock lever
21
22
Names of Operating Parts
Power switch
Shutter release button w /x/f/y button
Q button
I button
Four-way controller
4/W button
Green/i button
3 button
Refer to “Understanding the Button Functions” (p.52 - 55) for an
explanation of the function of each button.
Monitor Indications
Display in A Mode
The display changes in the following sequence each time you press the
4/W button: “Normal Display”, “Histogram + Info”, “No Info”,
“Backlight Off”.
• All the camera buttons function as normal even when the backlight is off. Press the shutter release button to take pictures as normal.
• Y appears if you press the shutter release button halfway when camera shake is likely to occur. To prevent camera shake, use a tripod
and/or the self-timer function (p.92).
• You cannot turn off the backlight in N (Frame Composite) mode.
• You cannot change the information on the display by pressing the 4/
W button in 9 (Green) mode or X (Digital Wide) mode.
Normal Display Histogram + Info
12 M OK
OK OK
Backlight Off
OK
No Info
23
24
Normal Display in Still Picture Capture Mode
1
2
3
7 8 9
10
11
12
13
14
4
5
6
15
16
5 Shutter speed
6 Aperture
10 Digital Zoom/Intelligent Zoom
17 18
12 Remaining image storage capacity
13 Battery level indicator (p.36)
17 Date Imprint setting (p.129)
* For 3, the displayed icon changes depending on the settings in [D-
Range Setting] on the [A Rec. Mode] menu.
: With Highlight Correction and Shadow Correction set to O (On).
: With Highlight Correction set to O (On) and Shadow Correction set to P (Off).
: With Highlight Correction set to P (Off) and Shadow Correction set to O (On).
Nothing is displayed when Highlight Correction and Shadow
Correction are both set to P (Off).
* For 4, M is displayed when Pixel Track SR is set to O (On) on the
[A Rec. Mode] menu. f is displayed when the shutter release
button is pressed halfway if Pixel Track SR is set to P (Off) and there is a danger of camera shake.
* 5 and 6 are only displayed when the shutter release button is pressed half-way.
* For 9, when the focus mode is set to = and the Auto Macro function
is activated, the q appears on the display (p.105).
* Some indications may not appear depending on the shooting mode.
25
26
Histogram + Info/No Info Display in Still Picture Capture Mode
A1 to A17 and B1 appear when “Histogram + Info” is selected. Only B1 appears when “No Info” is selected.
A5 A6 A7 A8 A9
A1
A2
A3
B1
A4
B2
B3
12
M
A10
A11
A12
A13
A14
A15
A16
A17
A18 A19
A4 Pixel Track SR icon (p.112)
A8 Digital Zoom/Intelligent Zoom
A10 Remaining image storage capacity
A11 Battery level indicator (p.36)
A19 Date Imprint setting (p.129)
B2 Shutter speed
B3 Aperture
* For A4, M is displayed when Pixel Track SR is set to O (On) on the
[A Rec. Mode] menu. f is displayed when the shutter release button is pressed halfway if Pixel Track SR is set to P (Off) and there is a danger of camera shake.
* B2 and B3 are only displayed when the shutter release button is pressed half-way.
* When there is an area on the screen that is so bright it appears white, the indicated area blinks red as a warning. Similarly, when there is an
area that is so dark it appears black, the indicated area blinks yellow as a warning.
* When the shooting mode is b (Auto Picture) and if you press the shutter release button halfway, the automatically selected shooting
mode appears in A1 even when “No Info” is selected (p.75).
* Some indications may not appear depending on the shooting mode.
Display in Q Mode
The display shows the shooting information of the image in the playback mode. The display changes in the following sequence each time you press the 4/W button:
Normal Display
OK
OK
Histogram + Info
12 M
OK
No Info
27
28
Normal Display/Histogram + Info Display in Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. A1 to
A11 appear when “Normal Display” or “Histogram + Info” is selected. B1 to B8 appear only when “Histogram + Info” is selected.
A2
A1
B1
B2
B3
B4
B5
B6
B7
12
M
A3 A4
A5
A6
A7
A8
A9
B8
A10
A11
A1 Playback mode
Q
K
A5 File number
A8 Battery level indicator (p.36)
A9 Volume icon
A10 Captured date and time (p.49)
A11 Four-way controller guide
B6 Shutter speed
B7 Aperture
* A2 appears only if the Face Recognition function worked when the image was shot.
* In “Normal Display”, A8 and A10 disappear if no operation is performed for two seconds.
* A9 appears only when the volume is being adjusted during playback
of movies, sounds, or voice memos (p.147, p.194, p.197).
* A11 appears even when “No Info” is selected, but disappears if no operation is performed for two seconds. When no operation is performed for two seconds in “Normal Display” or “Histogram + Info”, only “Edit” disappears.
* When there is an area on the screen that is so bright it appears white, the indicated area blinks red. Similarly, when there is an area that is so dark it appears black, the indicated area blinks yellow.
Guide Display
A guide for each available button operation appears as follows on the display during operation.
2
3
4
5
MENU
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
3 button
OK
SHUTTER
X , i
I , J
Zoom button
4/W button
Shutter release button
Green/i button
I button
Histogram
A histogram shows the brightness distribution of an image. The horizontal axis represents brightness (dark at the left and bright at the right) and the vertical axis represents the number of pixels.
The shape of the histogram before and after shooting tells
(Dark) ← Brightness → (Bright)
Dark portions Bright portions you whether the brightness and contrast are correct or not, and lets you decide if you need to use EV compensation and take the picture again.
Setting the Exposure (EV Compensation) 1p.121
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is too dark, the peak is on the left side, and if it is too bright, the peak is on the right side.
Dark image Correct image Bright image
29
30
When the image is too dark, the part to the left is cut off (dark portions) and when the image is too bright, the part to the right is cut off (bright portions).
The Optio W80 has a function where bright portions are indicated as blinking red and dark portions as blinking yellow.
Understanding Contrast
The graph peaks gradually for images in which contrast is balanced. The graph peaks on both sides but sinks in the middle for images with a large difference in contrast and low amounts of mid-level brightness.
1
Getting Started
Attaching the Strap ................................... 32
Powering the Camera ............................... 33
Installing the SD Memory Card ................ 39
Turning the Camera On and Off .............. 43
Initial Settings ........................................... 45
Attaching the Strap
1
Attach the strap (O-ST20) supplied with the camera.
1
Pass the narrow end of the strap through the strap lug.
2
Pass the other end of the strap through the loop and pull tight.
32
Powering the Camera
Charging the Battery
Use the supplied battery charger (D-BC78) to charge the supplied rechargeable lithium-ion battery (D-LI78) before using it in the camera for the first time or after a long period of non-use, or when the [Battery depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6 ft (1.8 m)”
Charging indicator
While charging: Lights
Charging finished: Turns off
2
To power outlet
3
1
Battery
1
AC plug cord
Battery charger
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the battery charger so that the
PENTAX logo is facing up.
The charging indicator turns on while charging.
When charging is finished, the charging indicator turns off.
4
Remove the battery from the battery charger when charging is finished.
• Do not charge batteries other than the rechargeable lithium ion D-LI78 battery using the supplied D-BC78 battery charger. Doing otherwise may cause damage or overheating.
• The battery has reached the end of its service life when it starts to run down soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to light, the battery may be faulty. Replace it with a new battery.
33
The time required to fully charge the battery is about 150 minutes (max.).
(The charging time may vary depending on the ambient temperature and charging conditions.) The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F).
1
Installing the Battery
Use the rechargeable lithium-ion battery D-LI78 that is provided with the camera. Charge the battery before using it in the camera for the first time.
Battery lock lever
Battery/card/terminal cover lock lever
34
Battery/card/ terminal cover
Battery
1
Open the battery/card/terminal cover.
Press the battery/card/terminal cover lock lever in the direction shown
1 , slide the cover towards 2 and open it towards 3.
2
Using the side of the battery to press the battery lock
lever in the direction of 4, insert the battery with the
PENTAX logo pointing toward the lens.
Push the battery in until it is locked in place.
Make sure that the battery is inserted with the PENTAX logo pointing toward the lens. If the battery is incorrectly oriented, malfunction may result.
3
Close the battery/card/terminal cover.
Slide the battery/card/terminal cover lock lever in the opposite direction indicated by 2. If you hear a click, the cover is securely closed.
Removing the Battery
1
Open the battery/card/terminal cover.
2
Press the battery lock lever towards 4.
The battery will be ejected. Take care not to drop the battery when removing it.
• Do not use excessive force when sliding the battery/card/terminal cover open and closed because the waterproof packing may peel off.
If the packing is not in the correct position, the camera will not be waterproof.
• If the battery/card/terminal cover is not locked securely when you close it, water, sand, or dirt may get into the camera.
• This camera uses a rechargeable lithium-ion battery D-LI78. Use of any other type of battery may damage the camera and cause malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented, malfunction may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery for 30 minutes using the battery charger and store the battery separately.
Be sure to recharge the battery every 6 to 12 months. Storing the battery below room temperature is ideal. Avoid storing it in high temperatures.
• The date and time may be returned to the default setting if the camera is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the camera is used continuously for a long period of time.
• Allow the camera to dry completely before changing the battery. Avoid changing the battery where the camera is likely to get wet or dirty, and make sure that your hands are dry.
• Battery performance may deteriorate as temperature decreases.
When using the camera in cold regions, we recommend carrying a spare battery in your pocket to keep it warm. Battery performance will return to normal in normal temperatures.
1
35
• Image Storage Capacity, Movie Recording Time, Sound
Recording Time, and Playback Time
(at 23°C or 73.4°F with the display on and the battery fully charged)
1 Image Storage
Capacity
*1
(flash used for 50% of shots)
Approx. 170 pictures
Movie Recording
Time
*2
Sound Recording
Time
*2
Playback Time *2
Approx. 65 min.
Approx. 230 min.
Approx. 180 min.
*1 Recording capacity shows approximate number of shots recorded during CIPA-compliant testing (with display on, flash used for 50% of the shots, and 23°C or 73.4°F). Actual performance may vary according to operating conditions.
*2 According to the results of in-house testing.
• In general, battery performance may temporarily deteriorate as the temperature decreases.
• Be sure to take a spare battery with you when traveling abroad or to a cold region, or if you intend to take a lot of pictures.
• Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display
(green)
(green)
(yellow)
(red)
[Battery depleted]
Battery Status
Adequate power remains.
Battery is running low.
Battery is running very low.
Battery is exhausted.
The camera will turn off after this message appears.
36
Using the AC Adapter
Use of the optional AC adapter kit (K-AC78) is recommended if you intend to use the camera for a long time or connect it to a computer.
1
1
6
5
3 DC coupler
4
DC terminal
1
Make sure that the camera is turned off and open the battery/card/terminal cover.
2
Remove the Battery.
Refer to p.34 - p.35 on how to open the battery/card/terminal cover and
remove the battery.
3
Insert the DC coupler.
Using the side of the DC coupler to press the battery lock lever, insert the DC coupler. Confirm that the DC coupler is locked in place.
The battery/card/terminal cover will not close while the DC coupler is inserted. Leave the cover open when using the AC adapter and do not attempt to close it.
4
Connect the DC terminal of the AC adapter to the DC terminal of the DC coupler.
5
Connect the AC plug cord to the AC adapter.
6
Plug the AC plug cord into the power outlet.
37
1
• Make sure that the camera is turned off before connecting or disconnecting the AC adapter.
• Make sure that the AC plug cord and the DC terminal connecting the
AC adapter to the camera are inserted securely. Data may be lost if either becomes disconnected while data is being recorded on the SD
Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “About the Battery Charger and the AC Adapter” (p.3)
before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter kit K-AC78 before using the adapter.
• When connecting the AC adapter, you cannot set the camera upright on the table because the cord from the DC coupler comes out of the bottom of the camera.
• Do not use excessive force when sliding the battery/card/terminal cover open and closed because the waterproof packing may peel off.
If the packing is not in the correct position, the camera will not be waterproof.
38
Installing the SD Memory Card
This camera uses either an SD Memory Card or an SDHC Memory Card.
(Both cards are referred to as SD Memory Cards hereafter.) Captured images and sound files are saved on the SD Memory Card if a card is inserted in the camera. They are saved in the built-in memory if a card is
1
• Be sure to use this camera to format (initialize) an SD Memory
Card that is unused or has been used on other cameras or digital
devices. Refer to “Formatting an SD Memory Card” (p.200) for
instructions on formatting.
• Make sure that the camera is turned off before inserting or removing the SD Memory Card.
• Allow the camera to dry completely before changing the SD Memory
Card. Avoid changing the card where the camera is likely to get wet or dirty, and make sure that your hands are dry.
• Do not use excessive force when sliding the battery/card/terminal cover open and closed because the waterproof packing may peel off.
If the packing is not in the correct position, the camera will not be waterproof.
• The still picture storage capacity varies depending on the capacity of the SD Memory Card and the selected number of recorded pixels and
• The power lamp blinks while the SD Memory Card is being accessed
(data is being recorded or read).
Backing Up Data
The camera may not be able to access data in the built-in memory in the case of a malfunction. Use a computer or other device to back up important data in another location.
39
1
40
SD Memory Card socket
SD Memory Card
Battery/card/ terminal cover
1
Open the battery/card/terminal cover.
Press the battery/card/terminal cover lock lever in the direction shown
1 , slide the cover towards 2 and open it towards 3.
2
Insert the SD Memory Card into the SD Memory Card socket so that the label is facing toward the front of the camera (the side with the lens).
Push the card in all the way. Images and sound may not be recorded correctly if the card is not inserted all the way.
3
Close the battery/card/terminal cover.
Slide the battery/card/terminal cover lock lever in the opposite direction indicated by 2. If you hear a click, the cover is securely closed.
To Remove the SD Memory Card
1
Open the battery/card/terminal cover.
2
Push the card into the SD Memory Card socket to eject it.
Pull the card out.
If the battery/card/terminal cover is not locked securely when you close it, water, sand, or dirt may get into the camera.
Precautions When Using an SD Memory Card
• The SD Memory Card is equipped with a write-protect switch. Setting the switch to
LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or a computer.
r appears on the display when the card is write-protected.
Write-protect switch
• Care should be taken when removing the SD Memory Card immediately after using the camera, as the card may be hot.
• Do not remove the SD Memory Card or turn off the camera while data is being written or played back from the SD Memory Card or while connected to a computer with a USB cable. Doing so may result in data corruption or damage to the card.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperature.
• Never remove the SD Memory Card while it is being formatted. This may damage the card and make it unusable.
• The data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted. This includes the following:
(1) When the SD Memory Card is mishandled by the user.
(2) When the SD Memory Card is exposed to static electricity or electrical interference.
(3) When the SD Memory Card has not been used for a long time.
(4) When the SD Memory Card is ejected or the battery is removed while the data on the card is being recorded or accessed.
• If it is not used for a long time, the data on the card may become unreadable.
Be sure to regularly make a backup of important data on a computer.
• Avoid using or storing the card where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed to rapid changes in temperature or to condensation.
• When using an SD Memory Card with a slow recording speed, recording may stop while you are taking movies even when there is adequate space in the memory, or shooting and playback may take a long time.
• Be sure to format SD Memory Cards that are unused or have been used on
another camera. Refer to “Formatting an SD Memory Card” (p.200).
• Please note that formatting the SD Memory Card will not necessarily delete the data so that it cannot be recovered using off-the-shelf data recovery software. There are off-the-shelf secure data deletion software programs available that will completely delete the data. If you are going to discard, give away or sell your SD Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information. In any case, the data on your SD Memory
Card should be managed at your own risk.
1
41
1
Number of Images Recordable on an SD Memory
Card
The size of a recorded image differs depending on the number of recorded pixels of the images. This affects the number of images that can be saved on an SD Memory Card.
Choose the appropriate number of recorded pixels for still pictures on the
[A Rec. Mode] menu.
Selecting the Number of Recorded Pixels 1p.113
Choose the appropriate number of recorded pixels and frame rate in
[Movie] on the [A Rec. Mode] menu.
Selecting the Number of Recorded Pixels and Frame Rate for Movies
1
For an approximate guide to the number of images or the length of
recorded movies that can be saved on an SD Memory Card, see “Main
42
Turning the Camera On and Off
Power switch/Power lamp
1
1
Press the power switch.
The camera turns on and both the power lamp and display turn on.
If the [Language/ ] screen or [Date Adjustment] screen appears
when you turn the camera on, follow the procedure on p.45 to set the
display language and/or current date and time.
2
Press the power switch again.
The camera turns off and both the power lamp and display turn off.
Checking the SD Memory Card
The SD Memory Card is checked when the camera turns on and the memory status is displayed.
a
+ r
The SD Memory Card is inserted. Images and sound files will be saved on the SD Memory
Card.
The SD Memory Card is not inserted. Images and sound files will be saved in the built-in memory.
The write-protect switch on the SD Memory Card
is in the LOCK position (p.41). Images and
sounds cannot be recorded.
Memory status
43
1
Starting-up in the Playback Mode
Use this function when you want to play back images or sound files straightaway without taking any pictures.
Power switch
Q button
1
Press the power switch while holding down the Q button.
The display turns on and the camera starts up in playback mode.
To switch from Playback Mode to A mode, press the Q button or press the shutter release button halfway.
Playing Back Still Pictures 1p.146
44
Initial Settings
The [Language/ ] screen appears when the camera is turned on for
the first time. Perform the operations in “Setting the Display Language”
below to set the language, and in “Setting the Date and Time” (p.49) to
set the current date and time.
The language, date, and time can be changed later. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
• To change the date and time, follow the steps in “Changing the Date and
1
Setting the Display Language
3 button
Four-way controller
4 button
1
Use the four-way controller
(2345) to choose the display language.
E n g l i s h
Deutsch
D a n s k
Svenska
S u o m i
P o l s k i
I t a l i a n o
Nederlands
MENU C a n c e l
Magyar
OK O K
45
1
2
Press the 4 button.
The [Initial Setting] screen appears in the selected language. If the desired settings for [Hometown] and [DST] (Daylight Saving
Time) appear, use the four-way controller
Initial Setting
Hometown
New York
English
DST
(23) to move the frame to [Settings complete], and press the 4 button to MENU
Settings complete
Cancel display the [Date Adjustment] screen. Go to
DST
“Setting the Date and Time” (p.49).
Go to step 3 in “To Set Hometown and DST” (p.48) if the desired
settings do not appear.
46
If you accidentally select the wrong language and go to the next procedure, perform the following operation to set the language back.
When the Wrong Language Has Been Inadvertently Selected
1
Press the four-way controller (5).
2
Use the four-way controller (2345) to select the
language and press the 4 button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in the Wrong Language
1
Press the 3 button.
This exits the settings screen and returns the camera to capture mode.
2
Press the 3 button.
The [A Rec. Mode] menu appears.
3
Press the four-way controller (5).
4
Use the four-way controller (32) to select [Language/
].
5
Press the four-way controller (5).
The [Language/ ] screen appears.
6
Use the four-way controller (2345) to select the language.
7
Press the 4 button.
The [W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown],
[Date] and [Time], refer to the pages below for instructions.
• To change [Hometown], follow the steps in “Setting the World Time”
• To change the date and time, follow the steps in “Changing the Date and
1
47
1
To Set Hometown and DST
3
Press the four-way controller (3).
The frame moves to [Hometown].
4
Press the four-way controller (5).
The [Hometown] screen appears.
Initial Setting
English
Hometown
New York
Settings complete
MENU Cancel
DST
5
Use the four-way controller (45) to choose a city.
H o m e t o w n
C i t y
D S T
N e w Yo r k
MENU C a n c e l OK O K
6
Press the four-way controller (3).
The frame moves to [DST] (Daylight Saving Time).
7
Use the four-way controller (45) to select O (On) or P (Off).
8
Press the 4 button.
The [Initial Setting] screen appears.
9
Press the four-way controller (23) to move the frame
to [Settings complete] and press the 4 button.
The [Date Adjustment] screen appears. Next, set the date and time.
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. See the following pages for information on the available video output formats and how to change the initial settings.
• Video output formats available initially: “List of World Time Cities” (1p.260)
• To change the video out format, follow the steps in “Changing the Video
48
Setting the Date and Time
Set the current date and time and the display format.
1
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
2
Use the four-way controller (23) to choose the date and time display format.
Choose from [mm/dd/yy], [dd/mm/yy] or [yy/ mm/dd].
Date Adjustment
Date Format
Date mm dd yy 24h
0 1 / 0 1 / 2 0 0 9
Time 0 0 : 0 0
Settings complete
MENU Cancel
3
Press the four-way controller (5).
The frame moves to [24h].
4
Use the four-way controller (23) to select [24h] (24-hour display) or
[12h] (12-hour display).
Date Adjustment
Date Format
Date
Time mm dd yy 24h
0 1 / 0 1 / 2 0 0 9
0 0 : 0 0
Settings complete
MENU Cancel
5
Press the four-way controller (5).
The frame returns to [Date Format].
6
Press the four-way controller (3).
The frame moves to [Date].
Date Adjustment
Date Format
Date
Time mm dd yy 24h
0 1 / 0 1 / 2 0 0 9
0 0 : 0 0
Settings complete
MENU Cancel
7
Press the four-way controller (5).
The frame moves to the month.
1
49
1
8
Use the four-way controller (23) to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in step 4, the setting switches between am and pm corresponding to the time.
9
Press the four-way controller (3).
The frame moves to [Settings complete].
10
Press the 4 button.
This confirms the date and time.
Date Adjustment
Date Format mm dd yy 24h
Date 0 1 / 0 1 / 2 0 0 9
Time 0 0 : 0 0
Settings complete
MENU Cancel
If you press the 4 button in step 10, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you can cancel the setting operation and switch to the capture mode by pressing the 3 button. In this case, the [Initial Setting] screen will appear next time you turn the camera on.
[Language/ ], [Date], [Time], [Hometown] and [DST] can be changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
• To change the date and time, follow the steps in “Changing the Date and
• To change the city or turn DST on and off, follow the steps in “Setting the
50
2
Common Operations
Understanding the Button Functions ..... 52
Setting the Camera Functions ................. 57
Understanding the Button Functions
A
Mode
2
1
2
3
4
6
7
8
9
5
1 Power switch
Turns the camera on and off (p.43).
2 Shutter release button
Focuses the camera on the subject when pressed halfway in Still
Picture Capture Mode (except when the focus mode is set to 3, s,
Takes a still picture when pressed down fully (p.67).
Pressing down fully starts and stops movie recording in C (Movie) and
(Underwater Movie) modes (p.134, p.137).
Pressing down fully starts and stops sound file recording in O (Voice
3 w /xbutton
Changes the captured area (p.79).
4 Q button
Switches to the Q mode (p.56).
5 3 button
Displays the [A Rec. Mode] menu (p.57).
52
6 I button
Switches the Face Recognition function (p.73). The Face Recognition
function is switched as follows each time the I button is pressed:
Smile Capture → Face Priority Off → Face Priority On
The Face Recognition function cannot be set to off in b (Auto
Picture)/B (Night Scene Portrait)/C (Half-length Portrait)/P
(Portrait)/R (Kids) modes.
7 Four-way controller
(2)
: Changes the drive mode (p.92 - p.97).
(3)
(4)
(5)
: Displays the Capture Mode Palette (p.71).
: Changes the flash mode (p.103).
: Changes the focus mode (p.105).
(23)
: Adjusts \ in \ mode (p.106).
8 4/W button
Changes the information on the display (p.23).
9 Green button
Switches to the 9 (Green) mode (p.78).
Calls up the assigned function (p.130).
2
53
Q
Mode
2
1
2
3
4
6
7
8
9
5
1 Power switch
Turns the camera on and off (p.43).
2 Shutter release button
Press halfway to switch the camera to A mode (p.56).
3 f /y button
In single-image display, pressing f switches to four-image display.
Pressing f again switches to nine-image display (p.148). Press y to
return to the previous display.
In single-image display, pressing y enlarges the image. Press f to
return to the previous display (p.157).
In nine-image display press f to change to folder or calendar display (p.149).
In folder/calendar display, press y to change to nine-image display
Adjusts the volume during playback of movies or sound files (p.147,
4 Q button
5 3 button
Displays the [W Setting] menu during single-image display (p.57).
Returns to single-image display during Playback Mode Palette display (p.151).
Returns zoom, four-, or nine-image display to single-image display.
54
In folder/calendar display, changes to nine-image display with the
cursor placed to the most recent image (p.150).
6 I button
Zooms up on the subjects’ faces in the order in which they were
recognized during shooting (Face close-up playback) (p.158).
7 Four-way controller
(2)
(3)
(45)
: Plays back and pauses a movie or sound file (p.147,
: Switches to the Playback Mode Palette (p.152).
Stops a movie or sound file during playback (p.147,
: Displays the previous or next image and sound file
during single-image display (p.146).
Fast-forwards, fast-reverses, frame forwards, frame reverses, reverses a movie and makes a movie play
forwards during playback (p.147).
Fast forwards, reverses, and moves to the next index in
(2345) : Moves the display area during zoom display (p.157).
Selects an image in four/nine-image display, a folder in
folder display, and a date in calendar display (p.148,
Moves the image when using the Frame Composite
8 4/W button
Changes the information on the display (p.27).
Returns zoom, four-, or nine-image display to single-image display
Changes to nine-image display of the selected folder during folder
Changes to single-image display of the selected date during calendar
9 Green/i button
Switches from single-image display to the Delete screen (p.160).
Switches from four- or nine-image display to the Select & Delete
Switches from folder display to the calendar display screen (p.149).
Switches from calendar display to the folder display screen (p.149).
2
55
2
Switching Between A Mode and Q Mode
In this manual, the capture mode, such as for taking still pictures, is referred to as “A mode” (the capture mode). The playback mode, such as for displaying captured images on the monitor, is referred to as “Q mode” (the playback mode). In Q mode, you can perform simple editing operations on the images that are played back.
Follow the procedure below to switch between A mode and Q mode.
To Switch from A Mode to Q Mode
1
Press the Q button.
The camera switches to Q mode.
To Switch from Q Mode to A Mode
1
Press the Q button or the shutter release button halfway.
The camera switches to A mode.
Displaying data stored in the built-in memory
When an SD Memory Card is inserted in the camera, images, movies, and sounds on the SD Memory Card are displayed. If you want to display images, movies, and sounds stored in built-in memory, turn the camera off and remove the SD Memory Card, or follow the procedure below to use the “Built-in memory display” function.
Make sure that the camera is turned off before inserting or removing the SD Memory Card.
• Viewing images stored in built-in memory while the SD Memory Card is inserted (built-in memory display)
• When switching from A mode to Q mode, you can play back images, movies, and sounds in the built-in memory while the SD Memory Card is inserted by pressing the Q button for more than one second.
• In the built-in memory display, you can play back still pictures (including
enlarged display) (p.146, p.157), play back movies (p.147), play back
sounds (p.194), and switch between four/nine-image display, folder display,
and calendar display (p.148, p.149).
• In the built-in memory display, you cannot delete data, delete a selection, display the Playback Mode Palette or display the menu. If you want to perform any of these operations on images, movies, or sounds in the builtin memory, do so after removing the SD Memory Card.
56
Setting the Camera Functions
To change the camera settings, press the 3 button to display the
[A Rec. Mode] menu or [W Setting] menu. Functions for playing back and editing images and sound files are displayed from the Playback
Mode Palette.
Operating the Menus
Press the 3 button in A mode to display the [A Rec. Mode] menu.
Press the 3 button in Q mode to display the [W Setting] menu.
Use the four-way controller (45) to switch between [A Rec. Mode] menu and [W Setting] menu.
2
57
During recording During playback
2
MENU
Rec. Mode
Image Tone
Pixel Track SR
Recorded Pixels
Quality Level
White Balance
AF Setting
MENU Exit
1 / 4
Bright
12M
AWB
MENU
Setting 1 / 3
Sound
Date Adjustment 0 1 / 0 1 / 2 0 0 9
Alarm
World Time
Folder Name
English
Date
MENU
Exit
Rec. Mode 1 / 4
Image Tone
Pixel Track SR
Recorded Pixels
Quality Level
White Balance
AF Setting
MENU Exit
Bright
12M
AWB
SHUTTER
Press halfway
MENU
Setting 1 / 3
Sound
Date Adjustment 0 1 / 0 1 / 2 0 0 9
Alarm
World Time
Folder Name
English
Date
MENU Exit
The setting is complete and the camera returns to A mode.
The setting is complete and the camera returns to Q mode.
Available button operations appear on the display during menu operation.
58
Ex.: To set the [Quality Level] on the [A Rec. Mode] menu
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller (3).
The frame moves to [Image Tone].
Rec. Mode 1 / 4
Image Tone Bright
Pixel Track SR
Recorded Pixels
Quality Level
12M
White Balance AWB
AF Setting
MENU Exit
3
Press the four-way controller (3) three times.
The frame moves to [Quality Level].
4
Press the four-way controller (5).
A pull-down menu appears with the items that can be selected.
The pull-down menu displays only those items that can be selected with the current camera settings.
Recordable Image No.
Image Tone
Pixel Track SR
Recorded Pixels
Quality Level
White Balance
AF Setting
MENU Cancel
Bright
12 M
OK
12
O K
5
Use the four-way controller (23) to change the setting.
The quality level changes each time the four-way controller (23) is pressed.
6
Press the 4 button or the four-way controller (4).
The setting is saved and then the camera is ready for setting other functions.
To exit the settings, press the 3 button.
2
To use another operation, refer to the alternate step 6 options on the next page.
59
2
To Save the Setting and Start Taking Pictures
6
Press the shutter release button halfway.
The setting is saved and the camera returns to capture mode.
When the shutter release button is pressed fully, the picture is taken.
When the [W Setting] menu is displayed from Q mode, you can switch to A mode by pressing the Q button.
To Save the Setting and Start Playback of Images
6
Press the Q button.
When the [A Rec. Mode] menu is displayed from A mode, the setting is saved and the camera returns to playback status.
To Cancel the Changes and Continue with Menu Operations
6
Press the 3 button.
The changes are canceled and the screen returns to step 3.
The 3 button function differs depending on the screen. Refer to the guide indications.
MENU
Exit Exits the menu and returns to the original screen.
MENU
Returns to the previous screen with the current setting.
MENU Cancel Cancels the current selection, exits the menu and returns to the previous screen.
60
Menu List
This displays the items that can be set with the menus and provides descriptions of each item. See the list of default settings in the Appendix
“Default Settings” (p.255) to decide whether you want the settings saved
when the camera is turned off and whether you want the settings returned to the defaults when the camera is reset.
[A Rec. Mode] Menu
This menu shows the functions related to taking still pictures and recording movies.
Item
Image Tone
Pixel Track SR
Recorded Pixels
Quality Level
Description
For setting the tone of still pictures
For choosing whether to compensate for shaking while taking still pictures
For setting the quality level of still pictures
Page
For choosing the number of recorded pixels of still pictures p.113
White Balance
AF
Setting
For adjusting the color balance according to the lighting conditions
Focusing
Area
When = (Standard), q (Macro), or (1cm
Macro) is selected as the focus mode, you can change the autofocus area (Focusing Area)
Auto Macro For choosing whether or not to use the auto macro function p.109
Focus
Assist
For setting whether or not to use focus assist
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
Movie
D-Range
Setting
Recorded
Pixels
Movie SR
Interval
Shoot
Highlight
Correction
Shadow
Correction
Interval Shoot
For choosing the area of the screen that is metered to determine the exposure
For setting the sensitivity
For setting the adjustment range when sensitivity is set to AUTO
For adjusting the overall brightness of the picture
For choosing the number of recorded pixels and the frame rate for movies
For choosing whether or not to use the movie shake reduction function
For recording multiple still pictures taken at a set interval as a movie file
For setting whether to perform bright portion compensation
For setting whether to perform dark portion compensation
For setting the interval, number of pictures, and start time for taking pictures
2
61
2
Item
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Sharpness
Saturation
(Tone Adjustment)
Contrast
Date Imprint
Description
For choosing whether to use the Blink Detection function with the Face Recognition function
For choosing whether or not to use the digital zoom function
For choosing whether to display Instant Review
For choosing whether to save the set values of the shooting function or return to the defaults when the camera is turned off
For assigning a function to the Green button in A mode
For choosing sharp or soft outlines
For setting the color saturation. When [Monochrome] is selected, the item changes to [Tone Adjustment]
For setting the image contrast level
For choosing whether to imprint the date and/or time when taking still pictures
Page
[A Rec. Mode] Menu 1
Rec. Mode 1 / 4
Image Tone Bright
Pixel Track SR
Recorded Pixels
Quality Level
12M
White Balance AWB
AF Setting
MENU Exit
[A Rec. Mode] Menu 2
Rec. Mode 2 / 4
AE Metering
Sensitivity AUTO
ISO Corction in AUTO ISO64-800
EV Compensation 0.0
Movie
D-Range Setting
MENU Exit
[A Rec. Mode] Menu 3
3 / 4 Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
[A Rec. Mode] Menu 4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint Off
4 / 4
MENU Exit
• Use the 9 (Green) mode to enjoy easy picture-taking using standard
settings, regardless of the settings in the [A Rec. Mode] menu (p.78).
• Assigning frequently used functions to the Green button enables you
to go straight to the desired function (p.130).
62
[W Setting] Menu
Item
Sound
Date Adjustment
Alarm
World Time
Language/
Folder Name
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete all
Pixel Mapping
Format
Description
For adjusting the operation volume and playback volume, and setting the start-up sound, shutter sound, key operation sound, and self-timer sound
For adjusting the date and time
For setting the alarm
For setting the hometown and destination
For setting the language in which menus and messages appear
For choosing how names are assigned to folders for storing images and sound files
For setting the method for connecting to a PC (MSC or PTP)
For setting the output format to the AV equipment
For changing the brightness of the display
Page
For setting the time until the camera enters powersaving mode
For setting the time until the camera turns off automatically
For choosing whether to use the Quick Zoom
function (p.157) when playing back images
For setting whether to display explanations for selected items in Capture Mode Palette and
Playback Mode Palette displays
For returning settings other than the date and time, language, world time and video out to their defaults
For deleting all the images and sound files at once
For correcting for defective pixels on the CCD sensor
For formatting the SD Memory Card
2
63
2
[W Setting] Menu 1
Setting 1 / 3
Sound
Date Adjustment 0 1 / 0 1 / 2 0 0 9
Alarm
World Time
English
Folder Name Date
MENU Exit
[W Setting] Menu 3
Setting
Guide Display
Reset
Delete all
Pixel Mapping
Format
MENU Exit
3 / 3
[W Setting] Menu 2
Setting
USB Connection M S C
Video Out
Brightness Level
N T S C
Power Saving 5 sec.
Auto Power Off 3 min.
Quick Zoom
MENU Exit
2 / 3
64
3
Taking Pictures
Taking Still Pictures .................................. 66
Setting the Shooting Functions ............. 103
Taking Pictures Underwater .................. 134
Recording Movies ................................... 136
Saving the Settings (Memory) ............... 143
Taking Still Pictures
3
Taking Pictures
The Optio W80 is equipped with functions and shooting modes that support a wide array of scenes and subjects. This section explains shooting using the default settings when shipped.
Power switch
Shutter release button w /x button
66
1
Press the power switch.
The camera turns on and is ready to take still pictures. In this manual, this is called Still Picture Capture mode.
2
Confirm the subject and shooting information on the display.
The focus frame in the middle of the display indicates the zone of automatic focusing.
Focus frame
When the camera recognizes a person’s face, the Face Recognition function is activated and the face recognition frame
Face recognition frame
You can change the captured area by pressing the zoom button (p.79).
Right (x) Enlarges the subject.
Left (w) Widens the area that is captured by the camera.
3
Press the shutter release button halfway.
The focus frame (or face recognition frame) on the display turns green when the camera focuses on the subject at the correct distance.
4
Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The image appears on the display temporarily (Instant Review: p.69)
and is saved to the SD Memory Card or the built-in memory.
Press the Green button to switch to the 9 (Green) mode and let the
camera set all the shooting functions automatically (p.78).
3
67
3
Using the Shutter Release Button
The shutter release button works in a two-step action as follows.
Press halfway
This refers to pressing the shutter release button gently to the first position. This locks the focus setting and the exposure. The green focus frame lights on the display when the shutter release button is pressed halfway and the subject is in focus. If the subject is out of focus, the frame turns white.
Press fully
This refers to pressing the shutter release button all the way down to the fully depressed position. This takes a picture.
68
Not pressed Pressed halfway
(first position)
Pressed fully
(second position)
• Press the shutter release button gently when taking a picture to prevent camera shake.
• Practice pressing the shutter release button halfway/fully to learn where the first position and second position are.
Poor focusing conditions
The camera may not be able to focus under the following conditions. In these cases, lock the focus on an object the same distance away as the subject (by pressing and holding the shutter release button halfway), then aim the camera at your subject and press the shutter release button fully.
• Objects that lack contrast such as a blue sky or white wall
• Dark places or objects, or conditions that prevent light being reflected back
• Horizontal lines or intricate patterns
• Fast moving objects
• When there is an object in the foreground and an object in the background in the captured area
• Strongly reflected light or strong backlighting (bright background)
Instant Review and Blink Detection
The image appears on the display temporarily (Instant Review) immediately after it is captured. If the camera detects that the subject’s
eyes are closed while Face Recognition (p.73) is activated, the message
[Closed eyes have been detected.] appears for 3 seconds (Blink
Detection).
• When the Face Recognition function does not work, Blink Detection also does not function. Even if the subject’s faces are recognized,
Blink Detection may not function depending on the condition of the recognized faces.
• You can also disable the Blink Detection function (p.126).
3
69
Setting the Shooting Mode
The Optio W80 has a variety of shooting modes that let you take pictures or record movies and sound in different situations simply by choosing the right mode for the particular situation from the Capture Mode Palette.
3
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to choose a shooting mode.
A guide of the selected shooting mode is displayed in the lower part of the display.
For capturing landscape views. Enhances colors of sky and foliage
MENU OK
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
70
The following 24 modes can be selected with Capture Mode Palette.
Item b Auto Picture
R
A
Program
Night Scene
Description
Automatically selects the best capture mode
Used for basic shooting. Various functions can also be set with this mode
For night time images. Use of a tripod or other support is suggested
C Movie For recording movies
Underwater For capturing images underwater
Underwater Movie Use this mode for taking underwater movies q
I
P
Landscape
X Digital Wide
Q c
R
Y
C
\
S
U
B
B
D
F
Flower
Portrait
Surf & Snow
Digital SR
Kids
Pet
Half-length
Portrait
Sport
Fireworks
Candlelight
Night Scene
Portrait
Text
Food
Digital Panorama
For capturing landscape views. Enhances colors of sky and foliage
For images of flowers. The outline of the flower is softened
For capturing portraits. Reproduces a healthy and bright skin tone
Stitches two pictures together to create a wider image
For bright images such as sand or snow.
Accurately meters for bright scenes
Higher sensitivity reduces blur
For capturing moving kids. Reproduces a healthy and bright skin tone
For capturing moving pets. Select the color according to the pet’s coat
For portraits with proper framing by automatic zoom. Fixed to 3M pixels
For a fast moving subject. Tracks the subject until the picture is taken
For capturing fireworks. Use of a tripod or other support is suggested
For capturing scenes in candlelight
For images of people at night. Use of a tripod or other support is advised
Captures text in an easy to read manner. Text contrast can be adjusted
For images of food and prepared dishes.
Enhances saturation and contrast
Stitches images taken with the camera to create a panoramic photograph
Page
3
71
3
N
Item
Frame Composite
Report
Description
For capturing images with a frame. Recorded pixels is fixed to 3M
For capturing image with fixed 1280×960 pixels for reports
Page
* Green Mode (p.78) and Voice Recording (p.192) are available in addition to the
ones noted above.
• In shooting modes other than R (Program), A (Night Scene), C
(Movie), c (Digital SR), F (Digital
Panorama), X (Digital Wide), and N (Frame Composite), saturation, contrast, sharpness, white balance, etc. are automatically set to the optimal settings for the selected mode.
• Some functions may not be available or may not function fully depending on the selected shooting mode. For details, refer to
“Functions Available for Each Shooting Mode” (p.246).
• You can turn off the shooting mode guide on the Capture Mode Palette
72
Using the Face Recognition Function
With the Optio W80, the Face Recognition function is available with all shooting modes.
When the camera detects a person’s face in the image, the Face Recognition function displays a yellow face recognition frame around the face on the display screen, sets the focus (Face Recognition AF) and compensates the exposure (Face Recognition AE).
If the subject in the face recognition frame moves, the frame also moves and changes size as it tracks the face.
The Face Recognition function can recognize up to 32 people’s faces. If it recognizes multiple faces, the camera displays a yellow frame over the main face and white frames over the other faces. It can display up to a total of 31 frames, including both the main and white frames.
(Maximum of 30 in Half-length Portrait mode)
Face recognition frame
When multiple faces are recognized
3
Main frame White frame
• Face Recognition AF and AE may not work if the subject is wearing sunglasses, has part of their face covered or is not looking toward the camera.
• If the camera cannot recognize the subject’s face, the camera focuses using the setting currently selected in the focusing area.
• However, the Smile Capture function may not work and an image may not be captured, even when turned on, depending on the condition of the recognized faces, such as the faces being too small. If this happens, press the shutter release button to take a picture.
To Switch the Face Recognition Function
By default, the Face Recognition function is set to Face Priority On. You can switch to the Smile
Capture function, which automatically releases the shutter when your subject smiles. The Face
Recognition function is switched as follows each time the I button is pressed: J Smile Capture
→ Face Priority Off → I Face Priority On.
73
I button
3
If 2 seconds pass after switching to Face Recognition, an icon indicating either Face Priority On or Smile Capture appears on the display. (The icon does not appear when the Face Recognition function is not activated.)
Face Priority On Smile Capture Face Priority Off
3 8 3 8
• The Face Recognition function cannot be set to off in b (Auto
Picture), B (Night Scene Portrait), C (Half-length Portrait), P
(Portrait), or R (Kids). You can select either Face Priority On or Smile
Capture in these modes.
• When Face Priority Off is selected, selecting 9 (Green), b (Auto
Picture), B (Night Scene Portrait), C (Half-length Portrait), C
(Movie), P (Portrait), or R (Kids) modes automatically switches to
Face Priority On. When switching to another mode from one of these modes, the Face Recognition setting returns to the previous setting.
• If you use the Face Recognition function when the flash mode is set to
, (Auto), d (Flash On + Red-eye) is automatically selected.
74
Taking Pictures Automatically (Auto Picture Mode)
In b (Auto Picture) mode, the camera automatically selects the most appropriate mode depending on the situations and subjects.
Shutter release button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select b
(Auto Picture).
3
Press the 4 button.
Auto Picture mode is selected and the camera returns to capture mode.
When the camera recognizes a person’s face, the Face Recognition function is activated and
the face recognition frame appears (p.73).
4
Press the shutter release button halfway.
The automatically selected capture mode appears on the top left of the display.
Standard
Landscape
Sport
Night Scene
Flower
Candlelight
Night Scene Portrait
Portrait
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
3
75
3
The following restrictions apply in b mode:
• EV Compensation is unavailable.
• You cannot turn the Face Recognition function off.
• The [Focusing Area] setting is fixed at J (Multiple).
• Flower cannot be selected when using Digital Zoom or Intelligent
Zoom.
• If Night Scene is selected when the flash mode is , (Auto) or c (Auto
+ Red-eye), the flash mode automatically changes to a (Flash Off).
• If Night Scene Portrait is selected when the flash mode is , (Auto), the flash mode automatically changes to d (Flash On + Red-eye).
76
Setting the Functions (Program Mode)
In R (Program) mode, the shutter speed and the aperture are set automatically by the camera during shooting. However, you can select other functions such as the flash mode and recorded pixels.
Shutter release button
Four-way controller
4 button
3
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select R
(Program).
3
Press the 4 button.
Program mode is selected and the camera returns to capture mode.
When the camera recognizes a person’s face, the Face Recognition function is activated and
the face recognition frame appears (p.73).
4
Set the functions you want to use.
Refer to “Setting the Shooting Functions” (p.103 - p.129) for details of
how to set the functions.
5
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
6
Press the shutter release button fully.
The picture is taken.
77
3
Taking Pictures in the Basic Mode (Green Mode)
In the 9 (Green) mode, you can enjoy easy picture-taking using standard settings, regardless of the settings in the [A Rec. Mode] menu.
9 mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
, (Auto)
9 (Standard)
= (Standard)
Information Display Standard
Pixel Track SR P (Off)
Recorded Pixels E (4000×3000)
White Balance
F (Auto)
Focusing Area
J (Multiple)
Auto Macro O (On)
Focus Assist
AE Metering
O (On)
L (Multi-segment metering)
Image Tone Bright
Quality Level
Highlight
Correction
Shadow
Correction
D
P
P
(Better)
(Off)
(Off)
Sensitivity AUTO (64-800)
EV Compensation ±0.0
Blink Detection O (On)
Digital Zoom O (On)
Instant Review O (On)
Sharpness
Saturation
G (Normal)
G (Normal)
Contrast
Date Imprint
G (Normal)
Off
Shutter release button
78
Green Button
1
Press the Green button in A mode.
The camera switches to 9 mode.
Press the Green button again to return to the status before 9 mode was selected.
When the camera recognizes a person’s face, the Face Recognition function is
activated and the face recognition frame appears (p.73).
2
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
• Assign 9 mode to the [Green Button] on the [A Rec. Mode] menu for
using 9 mode (p.130). (The default setting is 9 mode).
• In 9 mode, you cannot change the information on the display by pressing the 4/W button.
• Press the 3 button in 9 mode to display the [W Setting] menu.
The [A Rec. Mode] menu cannot be displayed.
3
Using the Zoom
You can use the zoom to change the captured area.
1
Press the w/x button in A mode.
w Wide (left): Widens the area that is captured by the camera.
x Tele (right) : Enlarges the subject.
If you continue to press x, the camera automatically switches from Optical Zoom to
Intelligent Zoom and stops at the point where the zoom switches to Digital Zoom.
Once the button is released and pressed again, the camera switches to digital zoom.
w /x button
3 button
Four-way controller
4 button
Zoom bar
Zoom ratio
79
If the Digital Zoom is set to off on the menu, the Optical Zoom and the
Intelligent Zoom ranges are available for use. The zoom ratio of the intelligent zoom changes depending on the number of recorded pixels.
The zoom bar is displayed as follows.
Zoom in with high image quality.
Zoom in with some degree of image deterioration.
3 Optical zoom range*1 Intelligent
Zoom range*2
Digital Zoom range
*1 You can zoom in to a maximum of 5× optically.
*2 The Intelligent Zoom range differs depending on the recorded pixels. See the following table.
Recorded pixels and the maximum zoom ratio
Intelligent Zoom
(The zoom ratio includes the 5× optical zoom.)
Digital Zoom
Recorded
Pixels
E
3:2
16:9
6 f h
V l m
Not Available (5× optical zoom only)
Approx. 6.5×
Approx. 7.7×
Approx. 9.8×
Not Available (5× optical zoom only)
Approx. 19.5×
Approx. 31.3× (same as Digital Zoom)
Equivalent to approx.
31.3×
80
• We recommend you use a tripod to prevent camera shake when taking pictures at high zoom.
• Pictures taken in the digital zoom range appear grainier than pictures taken in the optical zoom range.
• Intelligent Zoom is not available under the following conditions:
When the number of recorded pixels is set to E, optical zoom available).
3:2 , and 16:9
In C (Movie) mode
In (Underwater Movie) mode
In c (Digital SR) mode
In (Report) mode
When the sensitivity is set to 3200 or 6400.
(5×
• The image enlarged using Intelligent Zoom may appear rough on the display. This does not affect the quality of the recorded image.
• Intelligent Zoom is available regardless of whether Digital Zoom is turned on or off.
3
To Set the Digital Zoom
The digital zoom is set to O (On) in the default settings. To take pictures using only the optical zoom and Intelligent Zoom, set the digital zoom to
P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Digital Zoom].
3
Use the four-way controller (45)
to switch between O (On) or P
(Off).
Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
3 / 4
O (On) Uses Digital Zoom
Instant Review
Memory
P (Off) Uses only optical zoom and
Green Button
Intelligent Zoom
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
MENU Exit
Saving the Digital Zoom Function setting 1p.143
81
3
Taking Pictures of Dark Scenes (Night Scene,
Night Scene Portrait, Digital SR, Fireworks, and
Candlelight Modes)
You can choose settings appropriate for taking pictures of dark scenes, such as nightscapes.
A
B Night Scene Portrait c Digital SR
S Fireworks
U
Night Scene
Candlelight
For night time images. Use of a tripod or other support is suggested
For images of people at night. Use of a tripod or other support is advised
Higher sensitivity reduces blur
For capturing fireworks. Use of a tripod or other support is suggested
For capturing scenes in candlelight
Shutter release button
82
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select A
(Night Scene), B (Night Scene Portrait), c (Digital
SR), S (Fireworks), or U (Candlelight).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
When the camera recognizes a person’s face, the Face Recognition
function is activated and the face recognition frame appears (p.73).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
• The shutter speed tends to be slower when taking pictures of dark scenes.
• To prevent camera shake, use a tripod and the self-timer function
• In c (Digital SR) mode, the sensitivity is automatically set to AUTO, the ISO Correction in AUTO is set to 64-6400, and the number of recorded pixels is fixed at f (2592×1944).
• For S (Fireworks) mode, the sensitivity is fixed at the minimum, the focus mode is s (Infinity), and the flash mode is a (Flash Off). Also, the shutter speed is set to 4 seconds and the aperture is fixed to open.
3
Taking Pictures of People (Half-length Portrait/
Portrait Mode)
C (Half-length Portrait) and P (Portrait) modes are suitable for taking
pictures of people. The Face Recognition function (p.73) operates for
each shooting mode, making it easier to emphasize the subject’s face when taking pictures.
C
P
Half-length Portrait
Portrait
For portraits with proper framing by automatic zoom.
Fixed to 3M pixels
For capturing portraits. Reproduces a healthy and bright skin tone
Shutter release button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
83
3
2
Use the four-way controller (2345) to select C (Half-
length Portrait) or P (Portrait).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
When the camera recognizes a person’s face, the Face Recognition function is activated and the face recognition frame
If the camera recognizes a person’s face in
C mode, an orange frame appears showing the area the camera will zoom in to.
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
If a person’s face is recognized in C mode, the camera automatically zooms to show the shooting area in the orange frame from step 3.
5
Press the shutter release button fully.
The picture is taken.
84
Taking Pictures of Children (Kids Mode)
R (Kids) mode is suitable for taking pictures of moving children. It also reproduces healthy and bright skin tone. Face Recognition function
(p.73) operates automatically in R mode, making it easier to emphasize
the subject’s face when taking pictures.
Shutter release button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select R
(Kids).
3
Press the 4 button.
Kids mode is selected and the camera returns to capture mode.
When the camera recognizes a person’s face, the Face Recognition function is activated and the face recognition frame
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
3
85
Taking Pictures of Your Pet (Pet Mode)
Use Y (Pet) mode to keep your moving pet in focus and capture the color of your pet’s coat when you take a picture. Choose the appropriate icon depending on what color your pet is (closer to black or white or in between).
Shutter release button
3
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select Y (Pet).
3
Press the 4 button.
The Pet mode selection screen appears.
4
Use the four-way controller (23)
to select Y, Z , Z, a, b or b.
There are cat and dog icons. Although the dog and cat icons differ, their effect during shooting is the same. Choose whichever you prefer.
MENU OK
5
Press the 4 button.
Pet mode is selected and the camera returns to capture mode.
86
6
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
The focus frame follows the subject while the shutter release button is pressed halfway.
7
Press the shutter release button fully.
The picture is taken.
Taking Pictures of Sports and Leisure Activities
(Surf & Snow/Sport Mode)
3
Q
\
Surf & Snow
Sport
For bright images such as sand or snow. Accurately meters for bright scenes
For a fast moving subject. Tracks the subject until the picture is taken
Shutter release button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select Q (Surf
& Snow) or \ (Sport).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
When the camera recognizes a person’s face, the Face Recognition
function is activated and the face recognition frame appears (p.73).
87
3
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
When the Sport mode is selected, the focus frame follows the subject while the shutter release button is pressed halfway.
5
Press the shutter release button fully.
The picture is taken.
Taking Pictures of Text (Text Mode)
Take crisp and easy-to-read pictures of text. It is useful for taking pictures of and saving important documents, and when the text is too small and difficult to read.
Color
Reversed
Color
B&W
Negative
A picture of the text is taken in its original color.
The colors are reversed.
A picture of the text is taken in black and white.
Black and white are reversed.
Shutter release button
88
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select (Text).
3
Press the 4 button.
The text mode selection screen appears.
MENU OK
4
Use the four-way controller (23) to select , , , or .
5
Press the 4 button.
The text mode setting is selected and the camera returns to capture mode.
3
6
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
7
Press the shutter release button fully.
The picture is taken.
89
Framing Your Pictures (Frame Composite Mode)
In N (Frame Composite) mode, you can take pictures using the frames stored in the camera.
Shutter release button f /y button
3
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select N
(Frame Composite).
3
Press the 4 button.
The 9-frame display of the frame selection screen appears.
4
Use the four-way controller
(2345) to choose the frame you want to use.
OK y
5
Press the y button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller (45) Press to choose a different frame.
Zoom button (f) Press to return to the 9-frame display of the frame selection screen, and then perform step 4 to choose a different frame.
90
6
Press the 4 button.
The frame appears on the display.
When the camera recognizes a person’s face, the Face Recognition function is activated and the face recognition frame
7
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
8
Press the shutter release button fully.
The picture is taken.
3
• In N mode, the number of recorded pixels is fixed at h
(2048×1536).
• At shipment, the camera includes 3 default frames and 87 optional frames built-in. (The CD-ROM supplied with the camera contains a total of 90 frames, including the default frames.)
Optional Frames
The optional frames are stored in the built-in memory in the Optio W80. If the optional frames are deleted from the built-in memory using a computer, they can
be recovered by copying them from the CD-ROM (S-SW87) provided (p.182).
Adding a Frame to a captured image 1p.180
91
3
Using the Self-timer
In Self-timer mode, the picture is taken ten seconds or two seconds after the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture with the self-timer.
g
Z
Use this mode when you want to be included in a group picture. The picture is taken approximately ten seconds after the shutter release button is pressed.
Use this mode to avoid camera shake. The picture is taken approximately two seconds after the shutter release button is pressed.
Shutter release button
92
Four-way controller
4 button
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller
(453) to select g or Z and press
the 4 button.
The camera is ready to take the picture using the self-timer.
When the camera recognizes a person’s face, the Face Recognition function is activated and
the face recognition frame appears (p.73).
MENU OK
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
4
Press the shutter release button fully.
The picture is taken ten seconds or two seconds later.
Focusing may be compromised if you move the camera while the selftimer lamp is blinking when taking still pictures.
• In C (Movie) mode, recording will start after ten seconds (or two seconds).
• Press the shutter release button halfway while the self-timer is engaged to stop the countdown and press fully to restart the countdown.
• Z cannot be selected while 9 (Green) mode is in default setting. Select
Z in another shooting mode and then switch the shooting mode to 9.
Taking a Series of Pictures (Continuous
Shooting/Burst Shooting)
Pictures are taken continuously as long as the shutter release button is pressed.
j c
Continuous
Shooting
Burst
Shooting
Each time a picture is taken, the image is saved in the memory before the next image is taken. The higher the image quality, the longer the interval between shots.
The number of recorded pixels is fixed at f (2592×1944) and
8 shots are taken consecutively at an interval of approximately
2.9 frames/second (at approximately 5.9 frames/second at sensitivity of 3200 or 6400 for up to 8 shots).
3
Shutter release button
Four-way controller
4 button
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller
(453) to select j or c and
press the 4 button.
The camera is ready to take a series of pictures.
MENU OK
93
3
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter release button pressed.
• The flash does not discharge in j and c modes.
• j and c cannot be selected in 9 (Green), b (Auto Picture), A
(Night Scene), C (Movie), (Underwater Movie), S (Fireworks),
N (Frame Composite), X (Digital Wide) or F (Digital Panorama) modes.
• Digital Zoom and Intelligent Zoom are unavailable when the sensitivity is set to 3200 and higher.
• With j, you can continue shooting until the memory capacity of the
SD Memory Card or built-in memory is full.
• The interval of j varies according to the [Recorded Pixels] and
[Quality Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Recognition function is activated (p.73), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed at f in Burst Shooting. When the shooting mode is set to (Report), the number of recorded pixels is set to V (1280×960).
94
Taking Pictures at a Set Interval (Interval Shoot)
In this mode, a set number of pictures can be taken automatically at a set interval from a set time.
Interval
Number of
Shots
10 sec. – 99 min.
2 shots – number of recordable images
Start Delay 0 min. – 24 hours
Set the camera to take pictures at intervals.
The intervals can be set in increments of one second from ten seconds to four minutes, or in one-minute increments from four to 99 minutes. You cannot set the camera to take interval shots for less than ten seconds.
You can set this to up to 1000 shots. However, it cannot exceed the number of recordable images.
You can set one minute increments for the first 59 minutes and one hour increments from there. If the start time is set to 0 minutes, the first picture is taken as soon as the shutter release button is pressed.
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller (45)
to select k (Interval Shoot) and
press the 4 button.
The current interval shoot settings appear for approximately 1 minute. To take pictures with the current settings, go to step 10.
MENU OK
3
Press the 4 button while the settings are displayed.
The [Interval Shoot] setting screen appears. [Interval] is marked with the frame.
4
Set the interval.
1 Press the four-way controller (5).
Interval Shoot
Interval 0min. 10sec.
2 Use the four-way controller (23) to set the minutes, then press the four-
way controller (5).
Number of Shots 2
Start Delay 0hr.
0min.
3 Use the four-way controller (23) to set the seconds, then press the four-
way controller (5).
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
MENU
3
95
3
6
Set the number of shots.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
The frame returns to [Number of Shots].
7
Press the four-way controller (3).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Start Delay].
9
Press the 3 button.
The [Interval Shoot] settings are saved and the camera returns to capture mode.
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval shooting starts.
The camera turns off between shots (during standby). Press the power switch during standby to display the remaining number of shots and interval on the monitor.
The [Stop interval shooting?] message is displayed when the power switch and then the 3 button are pressed during standby.
Pressing the 4 button cancels interval shooting.
• Interval Shoot is unavailable in b (Auto Picture), 9 (Green), F (Digital
Panorama), X (Digital Wide) and O (Voice Recording) modes.
• Even if an alarm is set, the alarm will not ring during interval shooting.
• Interval Shoot stops if the SD Memory Card is removed or inserted during standby.
The Interval Shoot settings can also be configured from the [A Rec.
96
Taking Pictures with Automatic Exposure
Adjustment (Auto Bracket)
Press the shutter release button once to automatically adjust the exposure and take three pictures in succession. After taking the pictures, you can select the best one.
The shooting order is best exposure → –1.0 EV → +1.0 EV.
Shutter release button
3
Four-way controller
4 button
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller (45)
to select a (Auto Bracket) and
press the 4 button.
The camera is now ready to take pictures with Auto Bracket.
MENU OK
3
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
4
Press the shutter release button fully.
Press the shutter release button once to automatically adjust the exposure and take the three pictures at different exposures.
• When the Instant Review is set to on (p.126), the pictures taken are
shown in Instant Review after shooting (p.69).
• Auto Bracket is unavailable in C (Movie), (Underwater Movie), b
(Auto Picture), 9 (Green), S (Fireworks), F (Digital Panorama),
X (Digital Wide) and N (Frame Composite) modes.
97
3
Using the Digital Wide Function (Digital Wide
Mode)
In X (Digital Wide) mode, you can stitch two captured images into a single frame up to approx. 21mm coverage (35mm film equivalent).
+
Shutter release button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select X
(Digital Wide).
98
3
Press the 4 button.
The camera enters the X mode.
Turn the camera 90º counterclockwise and align your first picture.
When the camera recognizes a person’s face, the Face Recognition function is activated and the face recognition frame
1
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
5
Press the shutter release button fully.
The first captured image is temporarily saved, and the shooting screen for the second image is displayed.
3
OK
6
Take the second image.
Overlap the image on the preview guide on the left of the screen to compose the second image. Repeat steps 4 and 5 to take the second image. This combines first and second images.
The stitched first and second image appears on the display temporarily
(Instant Review), and then is saved.
• To minimize distortion when taking the second image, turn the camera so that it pivots around the right edge of the preview guide on the screen.
• Some distortion may result from moving objects, repeating patterns, or if nothing exists when overlapping the first and second image on the preview guide.
• When the Face Recognition function is activated (p.73), it works only
when taking the first shot.
• The number of recorded pixels for images captured with X mode is fixed at f (2592×1944).
• (1cm Macro) is unavailable in X mode.
99
3
To Cancel after Taking the First Shot
1
When the shooting screen for the second image is
displayed in step 5 on p.99, press the 4 button or the
four-way controller (3).
A confirmation dialog appears.
2
Use the four-way controller (23) to select an option and press the
4 button.
Save
Save
Discard
Cancel
Saves the first image and you can retake the first shot. The first image is saved in h (2048×1536).
Discards the first image and you can retake the first shot.
Returns to the shooting screen for the second image.
OK
Taking Panoramic Pictures (Digital Panorama
Mode)
In F (Digital Panorama) mode, you can stitch together two or three captured frames to create a panoramic photograph with the camera.
Shutter release button
100
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select F
(Digital Panorama).
3
Press the 4 button.
The camera enters the F mode and the message [Set shift direction] is displayed.
4
Use the four-way controller (45) to choose the direction in which the images will be joined.
The screen for taking the first frame is displayed.
When the camera recognizes a person’s face, the Face Recognition function is activated and the face recognition frame
1
3
5
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
6
Press the shutter release button fully.
The screen for taking the second frame is displayed after you take the first frame.
If you select right (5) in step 4:
The right edge of the first frame appears in semi-transparent form on the left edge of the display.
If you select left (4) in step 4:
The left edge of the first frame appears in semi-transparent form on the right edge of the display.
7
Take the second frame.
1 2
Move the camera so that the semitransparent image and the actual view overlap and press the shutter release button.
SHUTTER OK
101
3
8
Take the third frame.
Repeat steps 5 to 7 to take the third frame.
The panorama images are joined and a stitched together image appears.
The stitched together image does not appear when [Instant Review]
• Some distortion may result from moving objects, repeating patterns, or if nothing exists when overlapping the first and second frames or the second and third frames on the preview guide.
• When the Face Recognition function is activated (p.73), it works only
when taking the first shot.
To Cancel after Taking the First or Second Frame
1
After shooting the first frame in step 6 on p.101 or the
second frame in step 7, press the 4 button or the
four-way controller (3).
A confirmation dialog appears.
2
Use the four-way controller (23) to select an option and press the
4 button.
Save
Save
Discard
Cancel
Saves the captured image(s) and you can retake the first frame.
When this option is selected after shooting the second frame, the first and the second frames are stitched together and saved as a panoramic photograph.
Discards the captured image(s) and you can retake the first frame.
Returns to the previous shooting screen.
OK
Unstitched images shot in F mode are fixed at i (1600×1200).
102
Setting the Shooting Functions
Selecting the Flash Mode
, a b
Auto
Flash Off
Flash On c Auto + Red-eye d b
Flash On +
Red-eye
Soft Flash
The flash discharges automatically depending on the light conditions.
The flash does not discharge, regardless of the brightness.
Use this mode to take pictures where flash photography is prohibited.
The flash discharges regardless of the brightness.
This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject’s eyes.
The flash discharges automatically.
This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject’s eyes.
The flash discharges regardless of the light conditions.
This mode reduces the intensity of the flash so that the flash is not too bright even when fired at close range. The flash discharges regardless of the light conditions.
3
• The flash mode is fixed at a in the following situations:
• When C (Movie), (Underwater Movie), or S (Fireworks) is selected as the capture mode.
• When j (Continuous Shooting), c (Burst Shooting), or l (Auto
Bracket) is selected as the Drive Mode.
• When s (Infinity) is selected as the focus mode.
• In 9 (Green) mode, you can only select , or a.
• In A (Night Scene) mode, you cannot select , and c.
• If you use the Face Recognition function when , is selected, the mode is automatically set to d.
• A pre-flash discharges when using the red-eye reduction function.
Using the flash when capturing images at a close distance may cause irregularities in the image due to the light distribution.
103
Four-way controller
4 button
3
1
Press the four-way controller (4)
in A mode.
The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (23).
MENU
2
Press the 4 button.
The setting is saved and the camera returns to capture mode.
OK
About the red-eye phenomenon
Taking pictures using the flash may cause the subject’s eyes to appear red in the resulting picture. This phenomenon occurs when the light from the flash is reflected in the subject’s eyes. It can be reduced by illuminating the area around the subject or moving closer to the subject and zooming out to a wider angle.
Setting the flash mode to c (Auto + Red-eye) or d (Flash On + Red-eye) is also an effective way of reducing red eyes.
If the subject’s eyes appear red despite such precautions, they can be corrected
by the red-eye compensation function (p.179).
Saving the Flash Mode setting 1p.143
104
Selecting the Focus Mode
= q
3 s
Standard
Macro
1cm Macro
Pan Focus
Infinity
This mode is used when the distance to the subject is from
50 cm to ∞. The camera is focused on the subject in the autofocus area when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is from
10 cm to 60 cm. The camera is focused on the subject in the autofocus area when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is from
1 cm to 30 cm. The camera is focused on the subject in the autofocus area when the shutter release button is pressed halfway.
This mode is used when you ask someone to take pictures for you, or when taking pictures of the scenery through the window of a car or train. The entire picture, from the front to the back, is focused.
This mode is used for taking distant objects. The flash is set to a (Flash Off).
\ Manual Focus This mode lets you adjust the focus manually.
3
1
Press the four-way controller (5)
in A mode.
The focus mode changes each time the button is pressed. You can also change the setting using the four-way controller (23).
Four-way controller
4 button
MENU OK
105
3
2
Press the 4 button.
The setting is saved and the camera returns to capture mode.
• In 9 (Green) mode, you can only select =, q, or 3.
• (1cm Macro) is unavailable in X (Digital Wide) mode.
• The focus mode is fixed at s in S (Fireworks) mode.
• The noise from focusing is recorded when a focus mode other than 3 or s is selected in C (Movie) and (Underwater Movie) modes.
• When [Auto Macro] is on and shooting with q selected, if the subject is further than 60 cm away, the camera automatically focuses to ∞
(Infinity).
Saving the Focus Mode setting 1p.143
To Set the Manual Focus
The procedure for setting the focus manually (\) is described below.
1
Press the four-way controller (5) in A mode.
2
Use the four-way controller (5) to select \.
3
Press the 4 button.
The central portion of the image is magnified to full screen on the display.
MENU
4
Press the four-way controller
(23).
The \ indicator appears on the display to indicate the approximate distance to the subject. Use the four-way controller (23) to adjust the focus using the indicator as a guide.
2 for distant focus
3 for closer focus
MENU
\ indicator
OK
OK
106
5
Press the 4 button.
The focus is fixed and the camera returns to capture mode.
After the focus is fixed, you can press the four-way controller (5) again to display the \ indicator and readjust the focus.
The shooting mode and drive mode cannot be changed while the \ indicator is displayed.
To switch from \ to another focus mode, press the four-way controller
(5) while the \ indicator is displayed.
3
Selecting the Autofocus Settings
You can set the autofocus area and focusing method.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select = Setting.
Rec. Mode
Image Tone
1 / 4
Bright
Pixel Track SR
Recorded Pixels
Quality Level
12M
White Balance AWB
AF Setting
MENU Exit
3
Press the four-way controller (5).
The [AF Setting] screen appears.
107
3
Changing the Focusing Area (= area)
When = (Standard), q (Macro), or (1cm Macro) is selected as the focus mode, you can change the autofocus area (Focusing Area).
Focusing Area
J
Multiple
K
W
Spot
Automatic
Tracking
The camera measures a wide area in the center of the monitor
(within the focusing area) and focuses on the nearest subject.
The camera measures a narrow area in the center of the monitor (the spot focusing area) making it easier for you to focus on a specific subject.
The camera holds focus on the moving subject while you are pressing the shutter release button halfway.
4
Press the four-way controller (5).
The pull-down menu appears.
AF Setting
Focusing Area
Auto Macro
Focus Assist 0.0
MENU Cancel
5
Use the four-way controller (23) to change the
Focusing Area.
6
Press the 4 button.
The setting is saved.
7
Press the 3 button twice.
The camera returns to capture mode.
OK OK
• In C (Movie), (Underwater Movie), and N (Frame Composite) modes, W cannot be selected.
• In S (Fireworks), 9 (Green) and b (Auto Picture) modes, the focusing area is fixed at J.
108
Setting the Auto Macro
When [Auto Macro] is on, the focus is adjusted to the macro range
(distance to the subject is 10 cm to 60 cm) as necessary, even if the focus mode setting is AF (Standard).
When it is off and the focus mode is set to Standard (=), the AF operates only in the standard range, and focusing is not done in the macro range.
When the focus mode is set to Macro or 1cm Macro, the focus is only adjusted in the respective macro range and is not done in the standard range.
4
Use the four-way controller (23) to select [Auto Macro].
AF Setting
Focusing Area
Auto Macro
Focus Assist
3
MENU
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the 3 button twice.
The camera returns to capture mode.
109
Setting the = Assist Light (Focus Assist)
The AF assist light aids in focusing on dark subjects. This helps you to focus on the subject in low light conditions where auto focus does not work properly.
4
Use the four-way controller (23) to select [Focus Assist].
AF Setting
Focusing Area
Auto Macro
Focus Assist
3
MENU
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the 3 button twice.
The camera returns to capture mode.
Looking at the light directly will not create a safety hazard. However, do not look into the emitter from a very short distance since you may feel dazzled.
The camera does not emit the Focus Assist light under the following conditions.
• In C (Movie) or (Underwater Movie) mode
• When the focus mode is set to 3 (Pan Focus), s (Infinity) or z
(Manual Focus).
110
Setting the Image Tone
For setting the tone of still pictures.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Image
Tone].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select a finishing tone.
Rec. Mode 1 / 4
Image Tone
Pixel Track SR
Recorded Pixels
Bright
Natural
Monochrome
Quality Level
White Balance AWB
AF Setting
MENU Cancel OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• When [Monochrome] is selected, [Tone Adjustment] appears on the
[A Rec. Mode] menu for setting the tone of monochrome images instead of [Saturation].
• Select [Monochrome] in (Report) mode to fix the Tone Adjustment setting to [Standard].
3
111
Setting Pixel Track SR
You can set this function to correct for camera shake when taking still shots. If Pixel Track SR is set to O (On), the camera automatically corrects for camera shake in the images you shot. The default setting is
P (Off).
3
Shake reduction settings in C (Movie) and (Underwater Movie)
mode are configured under Movie SR (p.139).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Pixel Track SR].
3
Use the four-way controller (45) to
switch between O (On) or P (Off).
Rec. Mode 1 / 4
Image Tone Bright
O (On) Automatically corrects for camera shake.
Pixel Track SR
Recorded Pixels
Quality Level
12M
White Balance AWB
P (Off) No correction for camera shake.
The setting is saved.
AF Setting
MENU Exit
4
Press the 3 button.
The camera returns to capture mode.
In the following situations Pixel Track SR is turned off and cannot be selected.
• If the shooting mode is C (Movie)/ (Underwater Movie)/X
(Digital Wide)/C (Half-length Portrait)/S (Fireworks)/F (Digital
Panorama)/N (Frame Composite).
• When Voice Recording has been assigned to the Green Button and is being used.
• If the Drive Mode is j (Continuous Shooting)/c (Burst Shooting)/g
(10 sec. self-timer)/k (Interval Shoot)/l (Auto Bracket).
• When the flash is used.
• When sensitivity is set to 3200/6400. Or, when sensitivity is set to
3200/6400 by AUTO sensitivity.
112
Selecting the Number of Recorded Pixels
You can choose from nine recorded pixels settings for still pictures.
The larger the number of recorded pixels, the clearer the details will appear when you print your picture. As the quality of the printed picture also depends on the image quality, exposure control, resolution of the printer, and other factors, you do not need to select more than the required number of recorded pixels. h is adequate for making postcard-size prints. The more pixels there are, the larger the picture and the bigger the file size.
Refer to the following table for the appropriate settings according to expected usage.
Recorded Pixels
E 4000×3000
Expected Usage
For printing high quality photos or A4-size pictures or larger, or editing images on a computer.
3:2 4000×2672
16:9 4000×2256
For a natural feeling of expansiveness with the same aspect ratio as HDTV.
6 3072×2304 f 2592×1944 h 2048×1536
V 1280×960 l 1024×768 m 640×480
For making postcard-size prints.
For posting on a website or attaching to e-mail.
• The default setting is E.
• V (1280×960) can only be set for recorded pixels when (Report) mode is set.
• If you select
16:9
, the aspect ratio of the image is 16:9 and the monitor display for recording and playback is as shown on the right.
3
• If you select
3:2
, the aspect ratio of the image is 3:2 and the monitor display for recording and playback is as shown on the right.
113
3
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Recorded
Pixels].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to change the number of recorded pixels.
Recordable Image No.
Image Tone
Pixel Track SR
Recorded Pixels
Quality Level
12
M
3:2
16:9
7
M
5
M
12
White Balance
AF Setting 3 M
MENU Cancel OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• The number of recorded pixels for images captured in 9 (Green) mode is fixed at E.
• The number of recorded pixels for images captured in C (Half-length
Portrait) or N (Frame Composite) is fixed at h.
• The number of recorded pixels for images captured in c (Digital SR) or X (Digital Wide) mode is fixed at f. (The number of recorded pixels will be h if you exit Digital Wide mode without taking the second picture.)
• The number of recorded pixels for images shot in (Report) mode is set to V (1280×960).
• If you take and save only the first frame in F (Digital Panorama) mode, the number of recorded pixels is fixed at i.
114
Selecting the Quality Level of Still Pictures
Select the quality (data compression ratio) for still images according to how the images will be used.
The more stars (E), the higher the quality of the image, but the file size increases. The selected Recorded Pixels setting also affects the size of
Quality Level
C Best
D Better
E
Good
Lowest compression ratio. Suitable for photo prints.
Standard compression ratio. Suitable for viewing the image on a computer screen. (default setting)
Highest compression ratio. Suitable for attaching to e-mails or creating websites.
3
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Quality
Level].
3
Press the four-way controller (5).
The pull-down menu appears.
4
Use the four-way controller (23) to change the quality level.
The maximum number of pictures you can take is displayed at the top of the screen when you select a quality level.
Recordable Image No.
Image Tone
Pixel Track SR
Recorded Pixels
Quality Level
White Balance
AF Setting
Bright
12 M
12
MENU Cancel OK O K
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera is ready for taking pictures.
In 9 (Green) mode, the quality level is fixed at D (Better).
115
3
Adjusting the White Balance
You can take pictures in natural colors by adjusting the white balance according to the light conditions at the time of shooting.
F Auto
G Daylight
H Shade
I Tungsten Light
J Fluores. Light
K Manual
The camera adjusts the white balance automatically.
Use this mode when taking pictures outside in sunlight.
Use this mode when taking pictures outside in the shade.
Use this mode when taking pictures under electric or other tungsten light.
Use this mode when taking pictures under fluorescent light.
Use this mode when adjusting the white balance manually.
• Set another white balance if you are not satisfied with the color balance of pictures taken with the white balance set to F.
• Depending on the selected shooting mode, the white balance setting
may not be changed. Refer to “Functions Available for Each Shooting
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [White
Balance].
3
Press the four-way controller (5).
The [White Balance] screen appears.
4
Use the four-way controller (23) to change the setting.
You can check the results of available white balance settings on the preview image each time you press the four-way controller.
White Balance
MENU OK
5
Press the 4 button.
The setting is saved.
116
6
Press the 3 button.
The camera returns to capture mode.
Refer to the following “Manual Setting” for instructions on adjusting the white balance manually.
If you change the [White Balance] setting frequently, you can save time
by assigning the Fn settings to the Green button (p.130).
Saving the White Balance setting 1p.143
3
Manual Setting
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2
Point the camera at the blank sheet of paper or other material so that it fills the frame displayed in the center of the screen.
White Balance
SHUTTER Adjust
MENU OK
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode] menu.
5
Press the 3 button.
The camera returns to capture mode.
117
3
Setting the AE Metering
You can set the area of the screen where the brightness is metered to determine the exposure.
L
M
N
Multi-segment metering
Centerweighted metering
Spot AE metering
The camera divides the image into 256 areas, meters the brightness and determines the exposure.
The camera takes a reading of the overall brightness of the picture with the center of the image having more influence on the exposure.
The camera determines the exposure by metering the brightness only at the center of the image.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AE Metering].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select a metering method.
Rec. Mode 2 / 4
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation 0.0
Movie
D-Range Setting
MENU Cancel OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• When the shutter release button is pressed halfway, the brightness is metered and the exposure is determined.
• When the subject is outside the focusing area and you want to use
Spot AE metering, aim the camera at the subject and press and hold the shutter release button halfway to lock the exposure, then compose your picture again and press the shutter release button fully.
• Depending on the selected shooting mode, the [AE Metering] setting
may not be changed. Refer to “Functions Available for Each Shooting
Saving the AE Metering setting 1p.143
118
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
AUTO
The sensitivity is automatically adjusted by the camera. (Sensitivity 64-
800)
64
100
200
400
800
1600
3200
6400
The lower the sensitivity, the less noise that affects the image. The shutter speed will be slower in low light conditions.
Higher sensitivity settings use faster shutter speeds in low light conditions to reduce camera shake, but the image may be affected by noise.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to change the sensitivity.
Rec. Mode 2 / 4
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
Movie
D-Range Setting
AUTO
64
100
200
400
MENU Cancel OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
3
119
• When the sensitivity is set to 3200 or 6400, the number of recorded pixels is fixed at f (2592×1944).
• When set to c (Digital SR), 9 (Green), C (Movie), or
(Underwater Movie) mode, only [AUTO] is available.
• When set to S (Fireworks) mode, the sensitivity is fixed at 64.
• When sizes of 3:2 or 16:9 are selected, you cannot select 3200 or 6400.
• When the shooting mode is set to (Report), the AUTO is fixed at
64-6400. Other sensitivities can also be selected.
Saving the Sensitivity setting 1p.143
3
Setting ISO Correction in AUTO
Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 64-100, 64-200, 64-400, 64-800, and 64-1600.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [ISO
Corction in AUTO].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select the sensitivity adjustment range.
Rec. Mode
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
Movie
D-Range Setting
2 / 4
ISO64-100
ISO64-200
ISO64-400
ISO64-800
ISO64-1600
MENU Cancel OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
120
Setting the Exposure (EV Compensation)
For adjusting the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or underexposed.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [EV
Compensation].
3
Use the four-way controller (45) to select the EV value.
Rec. Mode
To brighten, select a positive (+) value. To darken, select a negative (–) value.
You can choose the EV setting in the range of –2.0 EV to +2.0 EV in 1/3 EV steps.
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
Movie
D-Range Setting
MENU Exit
2 / 4
AUTO
ISO64-800
0.0
4
Press the 3 button.
The camera returns to capture mode.
• When a histogram is displayed in Still Picture Capture mode or
Playback mode, you can check whether the exposure is correct (p.29).
• EV Compensation cannot be used in b (Auto Picture) or 9 (Green) mode.
Saving the EV Compensation setting 1p.143
3
121
3
D-Range Setting
Expands the dynamic range and the light level expressed by the CCD sensor and prevents bright and dark areas from occurring. After setup, an icon is displayed when taking still pictures.
Displayed when Highlight Correction and Shadow Correction are O
(On).
Displayed when Highlight Correction is O (On) and Shadow
Correction is P (Off).
Displayed when Highlight Correction is P (Off) and Shadow
Correction is O (On).
Not displayed Both are set to P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [D-Range
Setting].
3
Press the four-way controller (5).
The [D-Range Setting] screen appears.
Setting the Highlight Correction
You can set whether to compensate for overexposed parts of the subject. The default setting is P (Off).
4
Use the four-way controller (23) to select [Highlight Correction].
D-Range Setting
Highlight Correction
Shadow Correction
MENU Exit
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
122
6
Press the MENU button twice.
The camera returns to capture mode.
When Highlight Correction is set to O (On), the Sensitivity and the minimum ISO Correction in AUTO are doubled.
Setting the Shadow Correction
Set whether to correct portions of a subject that are too dark. The default setting is P (Off).
4
Use the four-way controller (23) to select [Shadow Correction].
D-Range Setting
Highlight Correction
Shadow Correction
3
MENU Exit
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the MENU button twice.
The camera returns to capture mode.
D-Range settings are not applicable in b (Auto Picture)/9 (Green) modes.
123
3
Setting the Interval Shooting
In this mode, a set number of pictures can be taken automatically at a set interval from a set time.
Interval
Number of
Shots
10 sec. – 99 min.
2 shots – number of recordable images
Start Delay 0 min. – 24 hours
Set the camera to take pictures at intervals.
The intervals can be set in increments of one second from ten seconds to four minutes, or in one-minute increments from four to 99 minutes. You cannot set the camera to take interval shots for less than ten seconds.
You can set this to up to 1000 shots. However, it cannot exceed the number of recordable images.
You can set one minute increments for the first 59 minutes and one hour increments from there. If the start time is set to 0 minutes, the first picture is taken as soon as the shutter release button is pressed.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Interval Shoot].
Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
3 / 4
3
Press the four-way controller (5).
The [Interval Shoot] setting screen appears. [Interval] is marked with the frame.
4
Set the interval.
Interval Shoot
1 Press the four-way controller (5).
Interval 0min. 10sec.
2 Use the four-way controller (23) to set the minutes, then press the four-
way controller (5).
Number of Shots 2
Start Delay 0hr.
0min.
3 Use the four-way controller (23) to set the seconds, then press the four-
MENU
way controller (5).
The setting is saved, and the frame returns to [Interval].
124
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
6
Set the number of shots.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
The setting is saved, and the frame returns to [Number of Shots].
7
Press the four-way controller (3).
The frame moves to [Start Delay].
8
Set the start delay.
Interval Shoot
1 Press the four-way controller (5).
The current time and the recording start time are displayed in real-time.
Current Time
Start Time
1 0 : 0 0 AM
1 0 : 0 0 AM
2 Use the four-way controller (23) to set the hours, then press the four-way
controller (5).
Start Delay
MENU Cancel
0 hr.
0 min.
OK OK
3 Use the four-way controller (23) to
set the minutes, then press the four-way controller (5).
The setting is saved, and the frame returns to [Start Delay].
9
Press the 3 button twice.
The camera returns to the shooting screen. The operations up to this point have only configured the [Interval Shoot] settings. To actually use interval shooting, you must select [Interval Shoot] from the drive mode.
3
Taking Pictures at a Set Interval (Interval Shoot) 1p.95
• Interval Shoot is unavailable in F (Digital Panorama), X (Digital
Wide), 9 (Green), and S (Fireworks) modes.
• Refer to p.140 for instructions on interval shooting for C (Movie) and
(Underwater Movie).
• Even if an alarm is set, the alarm will not ring while interval shooting is being performed.
• Interval Shoot stops if the SD Memory Card is removed or inserted during standby.
The Interval Shoot settings can also be configured from the Drive Mode.
125
3
Setting Blink Detection
This specifies whether Blink Detection works when you use the Face
Recognition function. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Blink
Detection].
3
Use the four-way controller (45) to
switch between O (On) or P (Off).
O (On) Blink Detection function works.
P (Off) Blink Detection function does not work.
The setting is saved.
Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
3 / 4
MENU Exit
4
Press the 3 button.
The camera returns to capture mode.
Setting the Instant Review
Use this setting to specify whether or not an Instant Review is displayed immediately after images are shot. The default setting is O (On: displays the image).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
126
3
Use the four-way controller (45)
to switch between O (On) or P
(Off).
O (On) Instant Review is displayed.
P (Off) Instant Review is not displayed.
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
3 / 4
If the Blink Detection function worked when shooting, [Closed eyes have been detected.] is displayed for 3 seconds during Instant Review.
3
Setting the Image Sharpness (Sharpness)
You can give the image sharp or soft outlines.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sharpness].
3
Use the four-way controller (45) to change the sharpness level.
Rec. Mode 4 / 4
Sharpness
F Soft Saturation
Contrast
G Normal
Date Imprint Off
H Sharp
MENU Exit
4
Press the 3 button.
The setting is saved and the camera returns to capture mode.
127
3
Setting the Saturation/Tone Adjustment
You can set either color brightness (Saturation) or the tone of monochrome images (Tone Adjustment).
The items displayed change depending on the [Image Tone] selected on the [A Rec. Mode] menu.
Selected Image Tone
Bright, Natural
Monochrome
Displayed item
Saturation
Tone Adjustment
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Saturation]
(Tone Adjustment).
3
Use the four-way controller (45) to select the level of saturation (or tone).
F Low (Blue for tone)
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint Off
4 / 4
G Normal (B&W for tone)
H High (Sepia for tone)
MENU Exit
4
Press the 3 button.
The setting is saved and the camera returns to capture mode.
Setting the Image Contrast (Contrast)
For setting the image contrast level.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Contrast].
128
3
Use the four-way controller (45) to change the contrast level.
F Low
G Normal
H High
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint Off
MENU Exit
4
Press the 3 button.
The setting is saved and the camera returns to capture mode.
4 / 4
Setting the Date Imprint Function
You can choose whether to imprint the date and/or time when taking still pictures.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Date Imprint].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select the Date Imprint details.
Rec. Mode 4 / 4
Sharpness
Saturation Choose from [Date], [Date & Time], [Time] or [Off].
Contrast
Date Imprint
Date
Date & Time
Time
Off
MENU Cancel OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
3
129
• The date and/or time imprinted with the [Date Imprint] function cannot be deleted.
• Note that if the printer or the image editing software is set to print the date and the images to be printed already have the date and/or time imprinted, the imprinted dates and/or times may overlap.
• O appears on the display in A mode when [Date Imprint] is set to any setting other than [Off].
• The date and/or time are imprinted on the picture with the display
format set in the [Date Adjustment] screen (p.49).
3
Setting the Green Button
You can assign one of the following functions to the Green button:
[Green Mode] (p.78), [Voice Recording] (p.192) or [Fn Setting] (p.131).
You can activate the assigned function by just pressing the Green button.
When the shooting mode is set to 9 (Green) Mode, [Green Button] settings cannot be configured on the [A Rec. Mode] menu. To configure the settings, first switch to a mode other than 9.
Assigning a Function
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller
(23) to select [Green Button].
Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
3
Press the four-way controller (5).
A pull-down menu appears.
3 / 4
130
4
Use the four-way controller (23) to select a function you want to assign.
Green Button
Q 9 Green Mode
Voice Recording
Fn Setting
OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
[Green Mode] is registered as the default setting.
MENU Cancel
3
Registering Frequently Used Functions (Fn Setting)
You can register frequently used functions on the four-way controller.
Using this function, you can directly set the functions by pressing the four-way controller without displaying the menu in Capture mode.
In [Fn Setting], still picture mode and Movie mode have different settings.
To execute [Fn Setting] in movie mode, press the MENU button in Movie
4
Use the four-way controller (23) to select [Fn Setting].
Green Button
+
+
Q 9 Green Mode
Voice Recording
Fn Setting
Recorded Pixels
+
+
Quality Level
WB White Balance
MENU Cancel OK
5
Press the 4 button.
The [Fn Setting] screen appears.
131
6
Use the four-way controller (23) to select a key you want to assign a function to.
Green Button
Q
+
+
+
+
Fn Setting
EV Compensation
Recorded Pixels
Quality Level
WB White Balance
MENU
3
7
Press the four-way controller (5).
A pull-down menu appears.
8
Use the four-way controller (23) to select the function you want to register.
Green Button
Q
+
+
+
+
EV Compensation
Recorded Pixels
Quality Level
WB White Balance
Sensitivity
AF Focusing Area
MENU Cancel OK
9
Press the 4 button.
The setting is saved.
10
Press the 3 button twice.
The camera returns to capture mode.
This function is activated only when you assign the [Fn Setting] to the
Green button.
You can assign only one function to each key.
The default settings for Fn settings
Still picture mode
Default setting (2) EV Compensation
(3) Recorded Pixels
(4) Quality Level
(5) White Balance
Movie mode
(2) Movie SR
(3) EV Compensation
(4) Recorded Pixels
(5) White Balance
132
Functions that can be assigned to each key
Selectable items
Still picture mode
EV Compensation
Recorded Pixels
Quality Level
White Balance
Sensitivity
Focusing Area
Auto Macro
AE Metering
Highlight Correction
Shadow Correction
Sharpness
Saturation (Tone Adjustment) *
Contrast
Movie mode
Recorded Pixels
Movie SR
White Balance
Focusing Area
EV Compensation
Sharpness
Saturation (Tone Adjustment) *
Contrast
* The items displayed change depending on the [Image Tone] selected on the [A Rec. Mode] menu. When you have selected either [Bright] or [Natural], [Saturation] is displayed, and when [Monochrome] is selected, [Tone Adjustment] is displayed.
3
Changing Assigned Items
Press the Green button in the shooting mode to display the Fn Setting screen. Select an item with the four-way controller (2345), and press either the (23) or (45) four-way controller to change the settings.
133
Taking Pictures Underwater
3
Taking Underwater Pictures (Underwater Mode/
Underwater Movie Mode)
This camera complies with JIS waterproof grade 8 and can be used to take pictures at a depth of 5 m continuously for 2 hours. In addition, this camera complies with JIS dustproof grade 6 (IP68).
Use the Underwater mode to take underwater still pictures that capture the blueness of the sea.
Use the Underwater Movie mode to record movies underwater.
Shutter release button
Four-way controller
4 button
134
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select
(Underwater) or (Underwater Movie).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the subject at the correct distance.
5
Press the shutter release button fully.
If you selected , the picture is taken.
If you selected , recording starts. To stop recording, press the shutter release button fully. Perform the same steps as C (Movie) mode to record movies.
• Before taking pictures underwater, make sure that there is no dirt or sand on the waterproof packing of the battery/card/terminal cover and check that the cover is securely locked.
• Before opening the battery/card/terminal cover after using the camera underwater, make sure that there is no water, dirt, or sand on the battery/card/terminal cover or anywhere else on the camera. Wipe the camera before opening the cover.
• In mode, AE metering is set to multi-segment metering.
Regarding Waterproof, Dustproof, and Shockproof Design 1p.7
• The flash will not discharge in mode.
• When the Focus Mode is set to =, q, or , pictures are taken by pressing the shutter release button half-way down to lock the focus before shooting.
• When the Focus Mode is set to \, you can adjust the focus before recording starts and during recording.
• Optical and digital zoom can be used in Underwater Movie mode before recording starts. Digital Zoom can also be used during recording.
3
Although the camera is designed to be waterproof and dustproof, avoid using the camera under the following conditions. It may momentarily be subjected to water pressure beyond that covered in the guarantee and water may enter the interior of the camera.
• Jumping into the water while holding the camera
• Swimming while holding the camera in your hand
• Using the camera in environments where water is applied forcefully, such as strong river currents and waterfalls
135
Recording Movies
3
Recording Movies
This mode enables you to record movies. Sound is recorded at the same time.
Microphone Shutter release button w /x button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to select C (Movie).
136
3
Press the 4 button.
C (Movie) mode is selected and the camera returns to capture mode.
The following information appears on the display.
1 Movie mode icon
2 Recording indicator (blinks during recording)
3 Remaining recordable time
4 Focus frame (does not appear during recording)
5 Movie Shake Reduction icon
MENU
1
For recording movies
OK
2 3
5 4
You can change the captured area by pressing the w/x button.
x : Enlarges the subject w : Widens the area that is captured by the camera
4
Press the shutter release button fully.
Recording starts. You can continue recording until the built-in memory or the SD Memory Card is full, or the size of the recorded movie reaches 2 GB.
5
Press the shutter release button fully.
Recording stops.
3
• The flash does not discharge in C (Movie) mode.
• The focus mode can be changed before recording starts.
• When the focus mode is set to \(Manual Focus), you can adjust the focus before recording starts.
• Optical and digital zoom can be used before recording starts. Digital
zoom is available during recording when digital zoom (p.81) is set to
O (On).
• When the shooting mode is set to C (Movie), Face Priority is automatically set to on. You can select Smile Capture or Face Priority
Off by pressing the I button before starting recording a movie (p.73).
When Smile Capture function is activated, movie recording starts automatically when the camera recognizes the subject’s smile.
However, depending on the condition of the recognized faces, movie recording may not start automatically because the Smile Capture function may not work. If this happens, press the shutter release button to start movie recording.
• The volume of recorded audio may vary depending on the orientation of the microphone, which is on the top of the camera.
Keeping the Shutter Release Button Pressed
If you keep the shutter release button pressed for more than one second, recording will continue as long as you keep the button pressed. Shooting stops when you take your finger off the shutter release button.
137
3
Selecting the Number of Recorded Pixels and
Frame Rate for Movies
You can choose the number of recorded pixels and frame rate settings for movies.
The more pixels there are, the clearer the details and the bigger the file size. The more frames per second, the better the quality of the movie, but the file size becomes larger.
Setting
Recorded
Pixels
Frame
Rate
Use
1280
F
G
H
I
J
1280×720
1280×720
640×480
640×480
320×240
320×240
30 fps
15 fps
30 fps
15 fps
30 fps
15 fps
Records images in the same aspect ratio (16:9) as
HDTV. (default setting)
Records images in the same aspect ratio (16:9) as
HDTV.
Suitable for viewing on a TV or computer screen.
Movement is recorded smoothly.
Suitable for viewing on a TV or computer screen.
Increases the total recording time by making the file size smaller.
Suitable for posting on a website or attaching to email. Movement is recorded smoothly.
Suitable for posting on a website or attaching to email. Increases the total recording time by making the file size smaller.
* The frame rate (fps) indicates the number of frames per second.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Movie].
3
Press the four-way controller (5).
The [Movie] screen appears.
4
Use the four-way controller (23) to select [Recorded
Pixels].
5
Press the four-way controller (5).
A pull-down menu appears.
138
6
Use the four-way controller (23) to change the number of recorded pixels and frame rate.
Rec. Time
Recorded Pixels
Movie SR
Interval Shoot
00:20
OK MENU Cancel
7
Press the 4 button.
The setting is saved.
8
Press the 3 button twice.
The camera returns to capture mode.
Setting the Movie SR (Movie Shake Reduction)
Function
In C (Movie) mode, you can compensate for camera shake while you are recording a movie with the Movie SR (Movie Shake Reduction) function.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Movie].
3
Press the four-way controller (5).
The [Movie] screen appears.
4
Use the four-way controller (23) to select [Movie SR].
5
Use the four-way controller (45)
to select O (On) or P (Off).
Movie
Recorded Pixels
O (On) Automatically corrects for camera shake.
Movie SR
Interval Shoot
P (Off) No correction for camera shake.
The setting is saved.
MENU
6
Press the 3 button twice.
The camera returns to capture mode.
3
139
3
Recording a Movie from Pictures Taken at a Set
Interval (Interval Movie)
In this mode, you can record multiple still pictures taken automatically at a set interval from a set time, as a movie file.
Interval
Total Time
Start Delay
You can set this to 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the total time, from 10 minutes to 359 hours. The total time and the settable units change depending on the interval set. The Interval can be set in increments of 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the start delay, from 0 minutes to 24 hours. The start delay can be set in increments of 1 minute for a delay time up to 59 minutes, and increments of 1 hour for a delay time longer than one hour. If the start time is set to 0 minutes, the first picture is taken as soon as the shutter release button is pressed.
1
Press the four-way controller (2) in C or mode.
2
Use the four-way controller (45)
to select k (Interval Shoot) and
press the 4 button.
The current Interval Movie setting appears for approximately one minute. To take pictures with the current settings, go to step 10.
MENU OK
3
Press the 4 button while the settings are displayed.
The Interval Movie setting screen appears. [Interval] is marked with the frame.
4
Set the interval.
1 Press the four-way controller (5).
A pull-down menu appears.
Interval Shoot
Interval 1min.
Total Time 0hr.
10min.
2 Use the four-way controller (23) to
set the interval, then press the 4 button.
The frame returns to [Interval].
Start Delay
MENU
0hr.
0min.
5
Press the four-way controller (3).
140
The frame moves to [Total Time].
6
Set the total time.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Total Time].
7
Press the four-way controller (3).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Start Delay].
9
Press the 3 button.
The Interval movie setting is saved and the camera returns to capture mode.
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval movie recording starts.
The camera turns off between shots (during standby). Press the power switch during standby to display the remaining time and interval on the monitor.
The [Stop interval shooting?] message is displayed when the power switch and then the 3 button are pressed during standby.
Pressing the 4 button cancels interval movie.
3
141
3
• Confirm that the battery is sufficiently charged before starting interval movie recording. If the battery is not sufficiently charged, it may become depleted during interval movie recording and cause recording of the movie to stop.
• When performing interval movie shooting, the settings are fixed as follows; Recorded Pixels: m, Quality Level: C, Movie SR: P (Off), and Flash Mode: a. However, shooting is done at a frame rate
according to the recorded pixels (p.138) set on the Movie menu.
• Interval Shoot stops if the SD Memory Card is removed or inserted during standby.
• If you set a start delay, a start time corresponding to the current time and the start delay you set is displayed in real time.
• The total time you can set differs according to the shooting interval you set, as indicated in the table below.
Interval
1 min
5 min
10 min
30 min
1 hr
Total time that can be set
30 fps
10 minutes to 5 hours and 59 minutes
(in increments of 1 minute)
30 minutes to 29 hours and
55 minutes
(in increments of 5 minutes)
1 hour to 59 hours and 50 minutes
(in increments of 10 minutes)
3 hours to 179 hours and 30 minutes
(in increments of 30 minutes)
6 hours to 359 hours
(in increments of 1 hour)
15 fps
10 minutes to 5 hours and 59 minutes
(in increments of 1 minute)
15 minutes to 29 hours and 55 minutes
(in increments of 5 minutes)
30 minutes to 59 hours and 50 minutes
(in increments of 10 minutes)
1 hour and 30 minutes to 179 hours and 30 minutes
(in increments of 30 minutes)
3 hours to 359 hours
(in increments of 1 hour)
142
Saving the Settings (Memory)
The Memory function is for saving the current camera settings when the camera is turned off.
For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for others you can choose on or off (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to On or Off in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.)
If you select O (On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P (Off), the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is on or off.
Default setting
P
Page
File No.
Item
Face Priority
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
White Balance
Sensitivity
EV Compensation
AE Metering
Digital Zoom
DISPLAY
Description
A Face Recognition mode set by using the
I button.
The flash mode set with the four-way controller (4)
The drive mode set with the four-way controller (2)
The focus mode set with the four-way controller (5)
The zoom position set with the w/x button.
The manual focus position set with the fourway controller (23)
The [White Balance] setting on the [A Rec.
Mode] menu
The [Sensitivity] setting on the [A Rec.
Mode] menu
The [EV Compensation] setting on the [A
Rec. Mode] menu
The [AE Metering] setting on the [A Rec.
Mode] menu
The [Digital Zoom] setting on the [A Rec.
Mode] menu
The display information display mode set with the 4/W button
If a new SD Memory Card is inserted when
On has been selected, file numbers are assigned sequentially.
O
P
P
P
P
P
P
P
P
O
P
O
3
143
3
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Memory].
3
Press the four-way controller (5).
The [Memory] screen appears.
4
Use the four-way controller (23) to choose an item.
Memory 1 / 3
Face Priority
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
MENU
5
Use the four-way controller (45) to select O (On) or P (Off).
6
Press the 3 button twice.
The camera returns to capture mode.
144
4
Playing Back and
Deleting Images
Playing Back Images .............................. 146
Deleting Images and Sound Files .......... 160
Connecting the Camera to AV Equipment
................................................................... 168
Playing Back Images
Playing Back Still Pictures
4
1
Press the Q button after taking a picture.
The camera enters the Q mode and the image appears on the display. Displaying one image in full in Q mode (Q mode default setting) is called single-image display.
Q button
Four-way controller
4 button i button
File number
To Play Back the Previous or Next Image
2
Press the four-way controller (45).
The previous or next image appears.
To Delete the Displayed Image
Press the i button while the image is displayed to display the Delete screen. Press the four-way controller (2) to select [Delete] and press the 4 button.
Delete
OK
For information on other deletion procedures 1p.160
146
Playing Back a Movie
You can play back the movies you have taken. The sound is played back at the same time.
Speaker f /y button
Q button
Four-way controller
1
Enter Q mode and use the four-way controller (45) to choose the movie you want to play back.
2
Press the four-way controller (2).
Playback starts.
4
The following operations can be performed during playback.
Four-way controller (4)
Four-way controller (2)
Plays back in reverse
Pauses playback
Zoom button (y)
Zoom button (f)
Increases the volume
Reduces the volume
Press and hold the four-way controller (5) Fast-forwards playback
Press and hold the four-way controller (4) Fast-reverses playback
The following operations can be performed while playback is paused.
Four-way controller (5)
Four-way controller (2)
3
Press the four-way controller (3).
Playback stops.
Forwards the frame
Resumes playback
147
f /y button
Q button
3 button
Four-way controller
4 button
Four-Image Display/Nine-Image Display
4 You can display four or nine thumbnails of captured images at a time.
1
Press the f button in Q mode.
The four-image display appears showing a page consisting of four thumbnail images. Pressing the f button again changes it to a nineimage display.
A page consisting of four or nine thumbnail images appears. The displayed images change four or nine images at a time page by page.
Use the four-way controller (2345) to move the frame. If there are too many images to fit on one page, pressing the fourway controller (24) while image 1 is selected will display the previous page.
Similarly, if you choose image 2 and press the four-way controller (35), the next page appears.
♦ indicates that the previous or next screen is stored in a separate folder.
1
1
2
Select & Delete 1 0 0 - 0 0 1 0
Four-Image Display
Folder divider icon
Frame
2
Select & Delete 1 0 0 - 0 0 1 0
Nine-Image Display
148
Multi-Image Display
The icons that appear on the images indicate the following:
(No icon)
O (With image)
Still picture without sound
Still picture with sound
C Movie (the first frame appears)
O (Without image) Sound files only
Press the 4 button to switch to single-image display of the selected image.
Press the Q button to switch to A mode.
Folder Display/Calendar Display
Press the f button in nine-image display to switch to folder or calendar display. Press the Green button to switch between folder display and calendar display.
1
Press the f button twice in Q mode.
The screen changes to nine-image display.
2
Press the f button.
The screen changes to folder display or calendar display.
Folder display
The list of folders with recorded images and sound files appears.
Use the four-way controller (2345) to move the frame.
If you select a folder and press the y button or the 4 button, images in the folder are displayed in nine-image display.
100
103
Frame
101
104
102
100_0707
4
149
4
Calendar display
Recorded images and sound files are displayed by date in calendar format.
The first image recorded on a date is displayed for that date on the calendar.
O appears for dates on which the first recorded file was either sound-only data or
66
Frame
WED THU FRI SAT
11
88
22
99
33 44 a still picture with a voice memo.
Use the four-way controller (2345) to move the frame.
If you select a date and press the y button, images taken on that date are displayed in nine-image display.
Select a date and press the 4 button to switch to single-image display of the first image recorded on that date.
• Press the 3 button in folder display or calendar display to switch to nine-image display.
• Press the Q button or half-press the shutter release button in folder display or calendar display to switch to A mode.
Using the Playback Function
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller (2345) to choose an icon.
The guide for the selected function appears below.
3
Press the 4 button.
The playback function is recalled.
150
MENU
For continuously playing back images. Screen or sound effects can be set
MENU OK
Press or
SHUTTER halfway
For modifying images with a Color filter or Soft filter
MENU OK
OK
MENU
Goes to the screen for selected playback function.
OK
Closes the Playback
Mode Palette and goes to A mode.
• When the frame is placed over each icon on the Playback Mode
Palette, a guide for each function appears.
• You can turn the guide display off for each function on the Playback
4
151
4
Playback Mode Palette u
P
N
\
Z Protect r
]
^
Playback Mode
Slideshow
Digital Filter
Frame Composite
Voice Memo
DPOF
Image Recovery
Start-up Screen
Description
For continuously playing back images. Screen or sound effects can be set
For modifying images with a Color filter or Soft filter
For composing an image with a frame. Select
Overwrite or Save as to save n o p s
[
Z
Resize
Cropping
Image/Sound Copy
Image Rotation
Changes Recorded Pixels and Quality Level to make the file size smaller
For cropping images to the size you like.
Saved as a new image
For copying images and sounds between the builtin memory and SD memory card
Rotates captured images. Useful when viewing vertical images on a TV
Movie
Edit
Save as Still image
For saving one frame from a movie as a still picture.
Divide Movies For dividing a movie into two.
Red-eye
Compensation
For compensating red-eye. May not work due to the condition of the image
Attaches sound to images. Recording is possible till the memory card is full
Protects images and sounds from accidental deletion. Formatting will delete
For the print settings. Useful when printing at a printing service
For recovering image and sound files which were accidentally deleted
For setting a captured image as the Start-up
Screen
Page
152
Slideshow
You can play back recorded images one after another.
1
Enter the Q mode and use the four-way controller
(45) to choose the image to start the slideshow with.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select u
(Slideshow).
For continuously playing back images. Screen or sound effects can be set
MENU OK
4
Press the 4 button.
The slideshow setting screen appears.
5
Press the 4 button.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow. To resume the slideshow, press the 4 button again.
MENU
6
Press any button other than the 4 button.
The slideshow stops.
Start
OK
4
153
To Set the Slideshow Conditions
You can set the playback interval and also a screen effect and sound effect for when one image changes to the next.
1
Use the four-way controller (23) to select [Interval] in step 5 on
Interval 3sec.
4
MENU
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the interval
and press the 4 button.
Choose from [3sec.], [5sec.], [10sec.], [20sec.] or [30sec.].
4
Use the four-way controller (23) to select [Screen
Effect].
After selecting [Screen Effect], press the four-way controller (5). A pull-down menu appears with the following items. Use the four-way controller (23) to select an item and press the 4 button.
Wipe The next image slides over the previous one from left to right
Checker The next image appears in small square mosaic blocks
Fade
Off
The current image gradually fades out and the next image fades in
No effect
5
Use the four-way controller (23) to select [Sound Effect].
6
Use the four-way controller (45) to select O (On) or P (Off).
Except when the [Screen Effect] is set to Off, you can choose O (On) or P (Off) for the sound that is played when one image changes to the next.
7
Use the four-way controller (23) to select [Start].
154
8
Press the 4 button.
The slideshow starts using the selected interval and effect.
• The slideshow will continue until you press any button other than the
4 button.
• Movies or pictures with sound will be played through to the end before the next picture is played back, regardless of the interval setting.
However, pressing the four-way controller (5) while playing back a movie or a picture with sound skips to the next image.
• Sound files made in O (Voice Recording) are not played back in the slideshow.
• Panorama images are displayed by scrolling from left to right in 4 seconds before the next picture is played back, regardless of the
Interval or Screen Effect setting.
Connecting the Camera to AV Equipment 1p.168
4
155
Rotating the Image
Q button
Four-way controller
4 button
4
1
Press the Q button after taking a picture.
The image appears on the display.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select s
(Image Rotation) and press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
4
Use the four-way controller
(2345) to choose the rotation
direction and press the 4 button.
The rotated image is saved.
MENU OK
• Panoramic images and movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated state.
156
Zoom Playback
You can magnify an image up to ten times.
f /y button
Q button
Four-way controller
4 button
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to magnify.
2
Press the y button.
The image is magnified (×1.1 to ×10). Holding down the y button continuously magnifies the image.
With Quick Zoom (p.217) set to O (On), pressing y once magnifies
the image to 10×.
You can use the + mark of the guide at the bottom left of the screen to check which portion of the image is magnified.
The following operations can be performed while an image is magnified.
Four-way controller
(2345)
Zoom button right (y)
Zoom button left (f)
Moves the position to be magnified
Makes the image bigger
(max. of 10×)
Makes the image smaller
(min. of 1.1×)
3
Press the 4 button.
The image returns to single-image display.
Guide Display
4
Movies cannot be magnified.
157
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback)
You can enjoy playing back images with the subject’s faces zoomed up simply by pressing the I button (Face close-up playback) if the Face
Recognition function operated when the images were taken.
4 f /y button
Q button
I button
Four-way controller
4 button
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to magnify.
2
Confirm that the I icon is displayed in the image and
press the I button.
The image is magnified around the face first recognized when the image was taken.
If multiple faces were recognized when the image was taken, the subject’s faces are zoomed up on each time the I button is pressed in order of the recognition during shooting.
158
The following operations can be performed during Face close-up playback mode.
Zoom button right (y)
Zoom button left (f)
Zooms in on the subject being displayed for face close-up playback from an equal or slightly larger magnification ratio.
Zooms out on the subject being displayed for face close-up playback from an equal or slightly smaller magnification ratio.
3
Press the 4 button.
The image returns to single-image display.
The magnification ratio for Face close-up playback may differ depending on the conditions such as the size of the face recognized when shooting.
4
159
Deleting Images and Sound Files
Delete images and sound files that you do not want to keep.
When images or sound files are inadvertently deleted
The Optio W80 is equipped with a function to recover images and sounds
deleted on the camera (p.164).
Deleted images and sound files can be recovered even if the camera has been turned off after deletion as long as the SD Memory Card has not been removed.
However, deleted images and sound files cannot be recovered after operations to write data such as taking pictures, recording movies, protecting images, saving DPOF settings, resizing images, cropping images, or formatting has been performed.
4
Deleting a Single Image/Sound File
You can delete a single image or sound file.
Protected images and sound files cannot be deleted (p.165).
160
Q button
Four-way controller
4 button i button
1
Enter the Q mode and use the four-way controller
(45) to choose the image/sound file you want to delete.
2
Press the i button.
A confirmation screen appears.
3
Use the four-way controller (2) to select [Delete].
Delete
OK
4
Press the 4 button.
The image is deleted.
Recovering Deleted Images 1p.164
To Delete a Sound File
If sound (voice memo) has been recorded with an image (p.196), you
can delete the sound without deleting the image.
1
Enter the Q mode and use the four-way controller
(45) to choose the image with sound.
2
Press the i button.
A confirmation screen appears.
3
Use the four-way controller (2) to select [Delete Sound].
4
Delete Sound
4
Press the 4 button.
The sound file is deleted.
• Select [Delete] in step 3 to delete both the image and sound file.
• You cannot delete only the sound in a movie.
OK
161
Deleting Selected Images and Sound Files
You can delete several images/sound files selected from the four/nineimage display at once.
Protected images and sound files cannot be deleted (p.165).
4 f /y button
Q button
Four-way controller
4 button i button
1
Press the f button once or twice in Q mode.
Four-image display or nine-image display appears.
2
Press the i button.
P appears on the images and sound files.
162
Select & Delete 1 0 0 - 0 0 1 0
3
Use the four-way controller
(2345) to choose the images and sound files that you want to
delete and press the 4 button.
O appears on the selected images and sound files.
MENU Cancel Delete OK
Pressing and holding the y button displays the selected image in a single screen and you can check whether to delete the image. Releasing the button returns to four/nine-image display. However, protected images cannot be displayed in singleimage display.
4
Press the i button.
A confirmation screen appears.
5
Use the four-way controller (2) to select [Select & Delete].
MENU
6
Press the 4 button.
The selected images and sound files are deleted.
S e l e c t & D e l e t e
OK
Deleting All Images and Sound Files
Deletes all the images and sound files at once.
Protected images and sound files cannot be deleted (p.165).
4
Q button
Four-way controller
4 button
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
163
4
2
Use the four-way controller (23) to select [Delete all].
Setting
Guide Display
Reset
Delete all
Pixel Mapping
Format
MENU Exit
3
Press the four-way controller (5).
A confirmation dialog appears.
4
Use the four-way controller (2) to select [Delete All].
3 / 3
Delete all
Delete all images/sounds
Delete All
Cancel
OK OK
5
Press the 4 button.
All the images and sound files are deleted.
Recovering Deleted Images
You can recover images or sound files that were taken with this camera and then deleted.
After deleting an image, once operations to write data such as taking pictures, recording movies, protecting images, saving DPOF settings, resizing images, cropping images, or formatting have been performed, or the SD Memory Card has been removed, the message [No image to be processed] appears in step 3 and the deleted images and sound files cannot be recovered.
1
After deleting a file, press the four-way controller (3).
The Playback Mode Palette appears.
164
2
Use the four-way controller
(2345) to select ] (Image
Recovery).
For recovering image and sound files which were accidentally deleted
MENU OK
3
Press the 4 button.
The number of recoverable images appears.
If there are no recoverable images, the message [No image to be processed] appears.
4
Use the four-way controller (2) to select [Recover].
4
R e c o v e r
OK
5
Press the 4 button.
The files are recovered.
• Recovered images and sound files have the same file name as before they were deleted.
• Up to a maximum of 999 deleted image files can be recovered.
Protecting Images and Sound Files from Deletion
(Protect)
You can protect stored images and sound files from being accidentally deleted.
1
Enter Q mode and use the four-way controller (45) to choose the image you want to protect.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
165
3
Use the four-way controller
(2345) to select Z (Protect).
4
Protects images and sounds from accidental deletion.
Formatting will delete
MENU OK
4
Press the 4 button.
The screen for selecting [Single Image/Sound] or [All Images/Sounds] appears.
5
Use the four-way controller (2) to select [Single Image/Sound].
S i n g l e I m a g e / S o u n d
OK
6
Press the 4 button.
The message [Protect this image/sound] appears.
To protect another image or sound file, use the four-way controller
(45) to select another image or sound file.
7
Use the four-way controller (2) to select [Protect].
Protect
166
OK
8
Press the 4 button.
The selected image or sound file is protected.
• To cancel the Protect setting, select [Unprotect] in step 7.
• Y appears on the top right of the protected images and sound files during playback.
• The maximum number of images and sound files you can protect in succession with [Single Image/Sound] is 99.
To Protect All Images and Sound Files
1
Select [All Images/Sounds] in step
A l l I m a g e s / S o u n d s
OK
2
Press the 4 button.
3
Use the four-way controller (2) to select [Protect].
P r o t e c t
OK
4
Press the 4 button.
All the images and sound files are protected.
Protected images and sound files will be deleted when the SD Memory
To cancel the Protect setting on all your images and sound files, select
[Unprotect] in step 3.
4
167
Connecting the Camera to AV
Equipment
By using the supplied AV cable (I-AVC7), you can capture and play back images on equipment with a video IN jack, such as a TV.
External Input Terminal
VIDEO
AUDIO
(L) (R)
Yellow White
PC/AV terminal
4
168
1
Turn the AV device and camera off.
2
Open the battery/card/terminal cover and connect the
AV cable to the PC/AV terminal.
Connect the terminal of the AV cable with pointing toward the 4 on the PC/AV terminal on the bottom of the camera.
3
Connect the other ends of the AV cable (yellow: video, white: audio) to the video input terminal and audio input terminal of the AV device.
When using stereo sound equipment, insert the sound terminal into the
L (white) terminal.
4
Turn the AV device on.
When the device that the camera is connected to and the device that plays back images are different, turn both devices on.
When viewing images on AV equipment with multiple video input terminals (such as a TV), refer to the operation manual of the device and select the video input terminal to which to connect the camera.
5
Turn the camera on.
• We recommend using the optional AC adapter kit K-AC78 if you intend
to use the camera for a long time (p.37).
• Depending on the country or region, images and sound files may fail to be played back if the video output format is set different from the one in use there. If this happens, change the video output format setting
• The camera display turns off while the camera is connected to AV equipment.
• The volume cannot be adjusted with the zoom button while the camera is connected to AV equipment.
• The camera’s AV output is output at normal resolution.
To watch movies shot at back on a computer.
1280
30
or F at HDTV resolution, play them
4
169
170
Memo
5
Editing and Printing
Images
Editing Images ........................................ 172
Setting the Printing Service (DPOF) ...... 187
About Printing
You can print pictures taken with the camera in the following ways.
1. Go to a photo processing lab
2. Use a printer that has an SD Memory Card slot to print directly from the SD
Memory Card
3. Use the software that is available on your computer to print images
Editing Images
Changing the Image Size (Resize)
By changing the size and quality of a selected image, you can make the file size smaller than the original. You can use this function to continue taking pictures when the SD Memory Card or the built-in memory is full, by making the images smaller and overwriting the original images to make more space available.
• Images taken with 3:2 (4000×2672) or images and movies cannot be resized.
16:9 (4000×2256), panoramic
• You cannot select a larger resolution and higher Quality Level than that of the original image.
5
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to resize.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select n (Resize).
172
Changes Recorded Pixels and Quality Level to make the file size smaller
MENU OK
4
Press the 4 button.
The screen for choosing the image size appears.
5
Select [Recorded Pixels] and
[Quality Level].
Use the four-way controller (45) to choose the size and quality.
Use the four-way controller (23) to switch between [Recorded Pixels] and [Quality
Level].
MENU
Recorded Pixels 12 M
OK
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
7
Use the four-way controller (23) to select [Overwrite] or [Save as].
O v e r w r i t e
OK
8
Press the 4 button.
The resized image is saved.
Cropping Images
You can delete the unwanted part of a picture and save the cropped image as a separate image.
Images taken with 3:2 (4000×2672) or images and movies cannot be cropped.
16:9 (4000×2256), panoramic
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to crop.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select o (Cropping).
For cropping images to the size you like. Saved as a new image
MENU OK
5
173
5
4
Press the 4 button.
The cropping screen appears.
The largest size of the cropped image is shown with a green frame on the screen. The cropped image cannot be larger than this cropping frame size.
5
Choose the cropping area.
The following operations move the green frame and set the area for cropping on the screen.
Zoom button
(f/y)
Four-way controller
(2345)
Green Button
Changes the size of the cropped section
Moves the cropping position up, down, left and right
Rotates the cropping frame
• The button is only displayed when the cropping frame size can be rotated.
MENU OK
6
Press the 4 button.
The cropped image is saved with a new file name.
The number of recorded pixels is selected automatically according to the size of the cropped section. The image is saved at the same quality level as the original.
174
Using the Digital Filters
This mode lets you change the color tones and perform special processing on a selected image.
B&W filter
Sepia filter
Toy camera filter
Retro filter
Color filter
Color extraction filter
Color enhancer filter
Soft filter
Fish-eye filter
Brightness filter
Changes color images to black and white.
Processes the image using the sepia filter.
Images seem to have been taken with a toy camera.
Images have the feel of old photos with a white border.
You can choose from three filters: Original image, amber, and blue.
Processes the image using the selected color filter. You can choose from six filters: red, pink, purple, blue, green, and yellow.
Processes the image using the selected color extraction filter. You can choose from three filters: red, green, and blue.
There are four filters: Sky Blue/Fresh Green/Delicate
Pink/Autumn Leaves.
Processes the image into a soft image.
Applies a fish-eye lens effect to images.
Adjusts the brightness of the image.
5
Panoramic images, movies or images taken with another camera cannot be edited using Digital Filter function. An error message appears if you choose this function from the Playback Mode Palette and press the 4 button.
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to edit.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select P (Digital
Filter).
For modifying images with a Color filter or Soft filter
MENU OK
175
4
Press the 4 button.
The digital filter selection screen appears.
1 B&W filter
2 Sepia filter
3 Toy camera filter
4 Retro filter
5 Color filter
6 Color extraction filter
7 Color enhancer filter
8 Soft filter
9 Fish-eye filter
10 Brightness filter
MENU
5 4 3 2 1
6 7 8 9 10
OK
5
To Select a B&W Filter, Sepia Filter or Soft Filter
5
Use the four-way controller (23) to choose a digital filter you want to use.
The preview image of the results of the filter effect appears.
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
7
Use the four-way controller (23) to select [Overwrite] or [Save as].
Overwrite
OK
8
Press the 4 button.
The images processed with the filter are saved.
176
To Select a Retro Filter, Color Filter, Color Extraction Filter, or
Color Enhancer Filter
5
Use the four-way controller (23) to choose the digital filter you want to use.
6
Use the four-way controller (45) to choose the effect.
The retro filter changes in the following sequence each time you press the four-way controller (5): Original image, amber, blue.
The color filter changes in the following sequence each time you press the four-way controller (5): Red, Pink, Purple, Blue, Green, Yellow.
The color extraction filter changes in the following sequence each time you press the four-way controller (5): Red, Green, Blue.
The color enhancer filter changes in the following sequence each time you press the four-way controller (5): Sky Blue/Fresh Green/Delicate
Pink/Autumn Leaves.
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
8
Use the four-way controller (23) to select [Overwrite] or [Save as].
5
Overwrite
OK
9
Press the 4 button.
The images processed with the filter are saved.
177
5
To Select a Brightness Filter, Fish-eye Filter, or Toy Camera Filter
5
Use the four-way controller (23) to choose a digital filter you want to use.
6
Use the four-way controller (45) to adjust the effect.
For the brightness filter, the brightness increases each time you press the four-way controller (5) and decreases each time you press the four-way controller (4).
MENU OK
With the fish-eye filter or toy camera filter, pressing the four-way controller (5) strengthens the effect and (4) lessens the effect.
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
8
Use the four-way controller (23) to select [Overwrite] or [Save as].
Overwrite
OK
9
Press the 4 button.
The images processed with the filter are saved.
178
Red-eye Compensation
You can correct images where the flash has caused the subject to appear with red eyes.
• The red-eye compensation function cannot be used on panoramic images, movies or on images where red eyes cannot be detected on the camera. An error message appears in step 4.
• The red-eye compensation function can only be used with still pictures taken with this camera.
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to correct.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select Z (Red-eye
Compensation).
For compensating red-eye.
May not work due to the condition of the image
MENU OK
4
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
5
Use the four-way controller (23) to select [Overwrite] or [Save as].
5
O v e r w r i t e
OK
6
Press the 4 button.
The edited image is saved.
179
5
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are
90 frames already stored in the camera.
Panoramic or other images shot at 3:2 (4000×2672) or 16:9 (4000×2256), movies, and images with a size less than h (2048×1536) cannot have a frame added. An error message appears in step 4.
1
Enter the Q mode and use the four-way controller
(45) to choose the image to which you want to add a frame.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select N (Frame
Composite).
For composing an image with a frame. Select Overwrite or Save as to save
MENU OK
4
Press the 4 button.
The 9-frame display of the frame selection screen appears.
5
Use the four-way controller
(2345) to choose a frame. y OK
180
6
Press the y button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller
(45)
Press to choose a different frame.
Zoom button left (f) Press to return to the 9frame display of the frame selection screen, and then perform step 5 to choose a different frame.
f
OK
7
Press the 4 button.
The frame position and size adjustment screen appears.
You can adjust the image using either of the following operations.
MENU OK
Four-way controller
(2345)
Press to adjust the position of the image
Zoom button (f/y) Press to make the image larger or smaller.
8
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
9
Use the four-way controller (23) to select [Overwrite] or [Save as].
5
Overwrite
OK
10
Press the 4 button.
The edited image is saved with the recorded pixels of h (2048×1536).
181
5
Optional Frames
The optional frames are stored in the built-in memory in the Optio W80. If the optional frames are deleted from the built-in memory using a computer, they can be recovered by copying them from the CD-ROM (S-SW87) provided.
To Copy Frames
1
Remove the SD Memory Card from the camera.
If you leave the SD Memory Card in the camera, the frames will be copied onto the card, not into the camera’s built-in memory.
2
Connect the camera to the computer using the provided USB cable (I-USB7).
Refer to “Connecting to a Computer” (p.223) for instructions on
connecting the camera to a computer.
3
When the device detection window opens, click
[Cancel].
4
Insert the CD-ROM (S-SW87) into the CD-ROM drive.
5
When the installer window opens, click [EXIT].
6
If there is not already a “FRAME” folder in the root directory of the camera (Removable Disk), create the folder.
7
Copy the desired files from the FRAME folder in the root directory of the CD-ROM to the FRAME folder on the camera (Removable Disk).
For information on working with files on your computer, refer to the instruction manual supplied with the computer.
8
Disconnect the USB cable from the computer and camera.
Refer to “Connecting to a Computer” (p.223) for instructions on
disconnecting the camera from a computer.
• Frames can be stored both in the built-in memory and on the SD Memory
Cards, but using large numbers of frames may slow down processing times.
182
.3
To Use a New Frame
The frames downloaded from the PENTAX website or other source can be used for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder in the built-in memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted with this camera.
• For more information on downloading, refer to the PENTAX website.
Editing Movies
You can select a frame from the recorded movie to save as a still picture or divide a movie into two.
1
Enter the Q mode and use the four-way controller
(45) to choose the movie you want to edit.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select [ (Movie
Edit).
For cutting out a still image from a movie or dividing a movie
MENU OK
4
Press the 4 button.
The movie edit selection screen appears.
S a v e a s S t i l l i m a g e
5
OK
183
5
To Save a Frame from a Movie as a Still Picture
5
Select [Save as Still Image] on the movie edit selection screen.
6
Press the 4 button.
The screen appears for selecting a frame to be saved as a still picture.
7
Use the four-way controller
(2345) to choose the frame you want to save.
2 Plays or pauses the movie
11
3 Stops the movie and returns to the first frame
MENU OK
4 Reverses the movie frame by frame
5 Advances the movie frame by frame
8
Press the 4 button.
The selected frame is saved as a still picture.
To Divide a Movie
5
Select [Divide Movies] on the movie edit selection screen.
6
Press the 4 button.
The screen for choosing the dividing position appears.
7
Use the four-way controller
(2345) to determine the dividing position.
2 Plays or pauses the movie
3 Stops the movie and returns to the first frame
4 Reverses the movie frame by frame
MENU
11
OK
5 Advances the movie frame by frame
8
Press the 4 button.
A confirmation dialog appears.
184
9
Use the four-way controller (2) to select [Divide].
D i v i d e
OK
10
Press the 4 button.
The movie is divided at the specified position, the two portions are saved as new files, and the original one is deleted.
The protected movies cannot be divided.
Copying Images and Sound Files
You can copy images and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when an SD Memory Card has been inserted in the camera.
5
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select p (Image/
Sound Copy).
3
Press the 4 button.
The copying method selection screen appears.
For copying images and sounds between the builtin memory and SD memory card
MENU OK
185
To Copy Files from the Built-in Memory to the SD Memory Card
All the images and sound files in the built-in memory are copied to the
SD Memory Card at once. Before copying the images, make sure that there is enough space on the SD Memory Card.
4
Use the four-way controller (2) to
select [2}{].
SD
OK
5
Press the 4 button.
All the images and sound files are copied.
5 To Copy Files from the SD Memory Card to the Built-in Memory
Selected images and sound files from the SD Memory Card are copied to the built-in memory one at a time.
4
Use the four-way controller (23) to select [{}2].
5
Press the 4 button.
6
Use the four-way controller (45) to select the image/sound file you want to copy.
186
MENU OK
7
Press the 4 button.
The selected image/sound file is copied.
• If sound (Voice Memo) has been recorded with the image, the sound file is copied with the image.
• When a file is copied from the SD Memory Card to the built-in memory, it is assigned a new file name.
Setting the Printing Service (DPOF)
DPOF (Digital Print Order Format) is the format for storing print order data on still pictures captured with a digital camera. Once the print order data has been stored, the pictures can be printed according to the DPOF settings using a DPOF-compatible printer or photo processing lab.
DPOF cannot be set for movies or sound-only files.
If the picture already has the date and/or time imprinted on it (p.129), do
not set [Date] O (On) in DPOF settings. If you select O (On), the imprinted date and/or time may overlap.
Printing a Single Image
Set the following items for each image.
Copies For setting the number of prints. You can print up to 99 copies.
Date Specify whether you want the date inserted on the print or not.
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select r (DPOF).
For the print settings.
Useful when printing at a printing service
MENU OK
3
Press the 4 button.
The screen for selecting [Single Image] or [All Images] appears.
5
187
4
Use the four-way controller (23) to select [Single Image].
S i n g l e I m a g e
5
OK
5
Press the 4 button.
The message [Applies DPOF settings to this image] appears.
To make DPOF settings for another image, use the four-way controller
(45) to select another image.
If DPOF settings have already been made for an image, the previous number of copies and date setting (O (On) or P (Off)) will be displayed.
6
Use the four-way controller (23) to choose the number of copies.
0 0 Copies
Date
MENU
7
Use the Green button to choose whether to insert the date or not.
O (On) The date will be imprinted.
P (Off) The date will not be imprinted.
To continue setting DPOF print order data, use the four-way controller (45) to choose another image and repeat steps 6 and 7.
MENU
Copies
Date
0 1
8
Press the 4 button.
The setting is saved and the screen returns to the DPOF menu.
OK
OK
Depending on the printer or printing equipment at the photo processing lab, the date may not be imprinted on the pictures even if On is selected in the DPOF settings.
To cancel DPOF settings, set the number of copies to [00] in step 6 and press the 4 button.
188
Printing All Images
When you choose the number of copies and whether or not to insert the date, the settings are applied to all the images stored in the camera.
1
Select [All Images] in step 4 on p.188.
2
Press the 4 button.
The message [Applies DPOF settings to all images] appears.
3
Choose the number of copies and whether to insert the date or not.
Refer to steps 6 and 7 in “Printing a Single
Image” (p.188) for details of how to make
the settings.
Copies
Date
0 1
MENU OK
4
Press the 4 button.
The settings for all the images are saved and the camera returns to the
DPOF setting screen.
5
• The number of copies specified in the DPOF settings applies to all the images. Before printing, check that the number is correct.
• Settings for single images are canceled when settings are made with
[All Images].
189
190
Memo
6
Recording and
Playing Back Sound
Recording Sound (Voice Recording Mode)
................................................................... 192
Adding a Voice Memo to Images ........... 196
Recording Sound (Voice Recording
Mode)
You can record sound with the camera. The microphone is located on top of the camera. When recording sound, aim the camera at the sound source to obtain the best sound quality.
Microphone
Speaker
6
Setting Voice Recording
To use the Voice Recording function, register Voice Recording to the
Green Button.
When the shooting mode is set to 9 (Green) Mode, [Green Button] settings cannot be configured on the [A Rec. Mode] menu. To configure the settings, first switch to a mode other than 9.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller (23) to select [Green Button].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select [Voice Recording] and
press the 4 button.
Green Button
Q 9 Green Mode
Voice Recording
Fn Setting
192
MENU Cancel
5
Press the 3 button.
The Voice Recording function is registered to the Green Button.
OK
Recording Sounds
Shutter release button
Green Button
1
Press the Green button in A mode.
The camera enters Voice Recording mode.
The remaining recordable time and the recording time of the current file appear on the display.
1 Recording time
2 Remaining recordable time
SHUTTER
2
Press the shutter release button fully.
Recording starts. The self-timer lamp blinks during recording.
You can record sounds continuously for up to 24 hours.
SHUTTER
When the Green button is pressed during recording, an index is added to the current sound file.
3
Press the shutter release button fully.
Recording stops.
1 2
• If you press and hold down the shutter release button for more than one second in step 2, recording continues until you take your finger off the button. This is useful for recording short sounds.
• Sound is saved in WAVE monaural files.
6
193
Playing Back Sound
You can play back the sound files you made with Voice Recording.
f /y button
Q button
Four-way controller
6
1
Press the Q button.
2
Use the four-way controller (45) to choose a sound file to play back.
3
Press the four-way controller (2).
Playback starts.
1 2
1 Total file recording time
2 Playback time
194
The following operations can be performed during playback.
Four-way controller (2) Pauses playback
Zoom button (y)
Zoom button (f)
Increases the volume
Reduces the volume
If there are no recorded indexes:
Four-way controller (4) Reverses playback
Four-way controller (5)
If there are recorded indexes:
Fast forwards playback
Four-way controller (4)
Four-way controller (5)
Plays back starting from the previous index
Plays back starting from the next index
The following operations can be performed while playback is paused.
Four-way controller (2) Resumes playback
Four-way controller (4)
Four-way controller (5)
Rewinds approx. 5 seconds
Advances approx. 5 seconds
4
Press the four-way controller (3).
Playback stops.
6
195
Adding a Voice Memo to Images
6
You can add a voice memo to your still pictures.
Recording a Voice Memo
1
Enter Q mode and use the four-way controller (45) to choose the still picture to which you want to add a voice memo.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select \ (Voice
Memo).
Attaches sound to images.
Recording is possible till the memory card is full
MENU OK
4
Press the 4 button.
Recording starts. You can record a voice memo continuously for up to 24 hours.
5
Press the 4 button.
Recording stops.
• A voice memo cannot be added to the image that already has a voice
memo. Delete the old voice memo (p.161) and record a new one.
• A voice memo cannot be added to protected images (p.165).
196
Playing Back a Voice Memo
f /y button
Q button
Four-way controller
1
Enter Q mode and use the four-way controller (45) to choose the still picture with the voice memo that you want to play back.
U appears on images with voice memos in single-image display.
2
Press the four-way controller (2).
Playback starts.
6
The following operations can be performed during playback.
Zoom button (y)
Zoom button (f)
Increases the volume
Reduces the volume
3
Press the four-way controller (3).
Playback stops.
197
198
Memo
7
Settings
Camera Settings ...................................... 200
Camera Settings
Formatting an SD Memory Card
Formatting deletes all the data on the SD Memory Card.
Be sure to use this camera to format (initialize) an SD Memory Card that is unused or has been used on other cameras or digital devices.
• Do not remove an SD Memory Card while it is being formatted. This may damage the card and make it unusable.
• Formatting deletes protected images and any data recorded on the card with a computer or any camera.
• SD Memory Cards formatted on a computer or device other than this camera cannot be used. Be sure to format the card with the camera.
• The built-in memory cannot be formatted except when an error occurs.
7
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Format].
3
Press the four-way controller (5).
The [Format] screen appears.
4
Use the four-way controller (2) to select [Format].
F o r m a t
A l l d a t a d e l e t e d
F o r m a t
C a n c e l
OK
5
Press the 4 button.
Formatting starts.
When formatting is completed, the camera returns to A mode or Q mode.
200
Changing the Sound Settings
You can adjust the volume of operation sounds and change the type of sound.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Sound].
3
Press the four-way controller (5).
S o u n d
The [Sound] screen appears.
Operation Volume
P l a y b a c k Vo l u m e
S t a r t - u p S o u n d
S h u t t e r S o u n d
1
O p e r a t i o n S o u n d
S e l f - t i m e r S o u n d
1
1
1
MENU
To Change the Operation Volume/Playback Volume
4
Use the four-way controller (23) to select [Operation Volume].
5
Use the four-way controller (45) to adjust the volume.
Set the volume to f to mute the start-up sound, shutter sound, operation sound, and self-timer sound.
6
Change [Playback Volume] in the same way as in steps
4 and 5.
7
To Change the Sound Type
4
Use the four-way controller (23) to select [Start-up Sound].
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23) to select the sound type.
Choose from [1], [2], [3], [Off], or [USER].
201
7
Press the 4 button.
8
Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in steps 4 to 7.
9
Press the 3 button.
The screen returns to the [W Setting] menu.
Changing the Sound (Using a Recorded Sound File)
You can use a sound recorded by the camera for sound settings.
The first two seconds of the selected sound file will be played as the
[USER] sound.
1
Select [USER] in step 6 in “Changing the Sound”.
2
Press the 4 button.
The playback screen for the recorded sound files appears.
7
MENU OK
3
Use the four-way controller (45) to select a sound file.
Play back the selected file to confirm.
Four-way controller (2): Plays back the first two seconds of the sound file.
Four-way controller (3): Stops playback.
4
Press the 4 button.
The selected sound is set as the [USER] sound.
5
Set [Shutter sound], [Operation Sound] and [Self-timer
Sound] in the same manner.
6
Press the 3 button.
The screen returns to the [W Setting] menu.
The Sound settings are saved when the camera is turned off.
202
Changing the Date and Time
You can change the initial date and time settings (p.49). You can also
set the style in which the date appears on the camera.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Date
Adjustment].
3
Press the four-way controller (5).
The [Date Adjustment] screen appears.
Date Adjustment
Date Format mm dd yy 24h
Date
Time
0 1 / 0 1 / 2 0 0 9
0 0 : 0 0
Settings complete
MENU Cancel
4
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
Depending on the initial setting or previous setting, [dd/mm/yy] or [yy/ mm/dd] may be displayed.
5
Use the four-way controller (23) to choose the date and time display style.
Choose from [mm/dd/yy], [dd/mm/yy] or [yy/ mm/dd].
Date Adjustment
Date Format
Date
Time mm dd yy 24h
0 1 / 0 1 / 2 0 0 9
0 0 : 0 0
Settings complete
MENU Cancel
6
Press the four-way controller (5).
The frame moves to [24h].
7
203
7
7
Use the four-way controller (23) to select [24h] (24-hour display) or
[12h] (12-hour display).
Date Adjustment
Date Format mm dd yy 24h
Date 0 1 / 0 1 / 2 0 0 9
Time 0 0 : 0 0
Settings complete
MENU Cancel
8
Press the four-way controller (5).
The frame returns to [Date Format].
9
Press the four-way controller (3).
The frame moves to [Date].
Date Adjustment
Date Format mm dd yy 24h
Date 0 1 / 0 1 / 2 0 0 9
Time 0 0 : 0 0
Settings complete
MENU Cancel
10
Press the four-way controller (5).
The frame moves to one of the following items depending on the date style set in step 5.
Month for [mm/dd/yy]
Day for [dd/mm/yy]
Year for [yy/mm/dd]
The following operations and screens use [mm/dd/yy] as an example.
The operations are the same even if another date style has been selected.
11
Use the four-way controller (23) to change the month.
Date Adjustment
Date Format mm dd yy 24h
Date 0 1 / 0 1 / 2 0 0 9
Time 0 0 : 0 0
Settings complete
MENU Cancel
12
Press the four-way controller (5).
The frame moves to the day field. Use the four-way controller (23) to change the day. After changing the day, change the year in the same manner.
204
13
Change the time in the same way as in steps 8 to 12.
If you selected [12h] in step 7, the setting switches between am and pm corresponding to the time.
14
Press the 4 button.
15
Press the four-way controller (3).
The frame moves to [Settings complete].
16
Press the 4 button.
The date and time settings are saved and the screen returns to the
[W Setting] menu.
When you press the 4 button in step 16, the camera clock is reset to
00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds.
Setting the Alarm
You can set the alarm to ring at a specified time.
You can choose whether the alarm will ring at the same time every day or only once at the set time.
Setting the Alarm
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Alarm].
3
Press the four-way controller (5).
Alarm 1 4 : 1 4
The Alarm screen appears.
Alarm Off
Time 0 0 : 0 0
Settings complete
MENU Cancel
7
205
7
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to select the alarm.
Choose from [Off], [Once], or [Everyday].
6
Press the 4 button.
7
Press the four-way controller (3).
The frame moves to the [Time] field.
8
Press the four-way controller (5).
The frame moves to the hour field.
9
Use the four-way controller (23) to change the hour,
then press (5).
The frame moves to the minute field.
Change the minutes in the same manner.
10
Press the 4 button.
11
Press the four-way controller (3).
The frame moves to [Settings complete].
12
Press the 4 button.
When the alarm is set to [Off], the settings are saved and the screen returns to the [W
Setting] menu.
Check that [Alarm] is set to P (Off).
When the alarm is set to [Once] or
[Everyday], [Alarm is set] is displayed and the power turns off.
Sound
Date Adjustment 0 1 / 0 1 / 2 0 0 9
Alarm
World Time
Folder Name
English
Date
MENU Exit
Setting 1 / 3
206
Checking the Alarm
1
Use the four-way controller (23) to select [Alarm] on
the [W Setting] menu.
Check that [Alarm] is set to O (On).
2
Press the four-way controller (5).
The Alarm screen appears.
Check the alarm frequency and time.
Alarm
Alarm Once
1 4 : 1 4
Time 1 4 : 2 5
Settings complete
3
Press the 3 button twice.
The camera returns to A mode or Q mode.
MENU Cancel
Turning the Alarm Off
The Clock mode screen appears and the alarm rings for one minute when the set time is reached while the camera is turned off.
You can stop the alarm by pressing any button on the camera while the alarm is ringing.
7
• The alarm will not ring if the camera is on when the set time is reached.
• Even if an alarm is set, the alarm will not ring while interval shooting is being performed.
207
Setting the World Time
The date and time selected in “Setting the Date and Time” (p.49) and
“Changing the Date and Time” (p.203) serve as the W ( Hometown) date
and time. By using the world time function, you can display the time in a city other than the Hometown (X Destination). This is useful when taking pictures in a different time zone.
7
To Set the Destination
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [World
Time].
3
Press the four-way controller (5).
The [World Time] screen appears.
Wo r l d Ti m e
S e l e c t Ti m e
DST
1 4 : 2 5
D e s t i n a t i o n
N e w Yo r k
H o m e t o w n
N e w Yo r k
MENU
DST
1 4 : 2 5
4
Use the four-way controller (23) to select X
(Destination).
5
Press the four-way controller (5).
The [Destination] screen appears. The city that is currently selected blinks on the map.
6
Use the four-way controller (45) to change the Destination city.
D e s t i n a t i o n 1 4 : 2 5
The current time, location and time difference of the selected city appear.
C i t y
D S T
MENU
N e w Yo r k
Ti m e D i f .
+ 0:00
C a n c e l OK O K
208
7
Use the four-way controller (23) to select [DST].
8
Use the four-way controller (45) to select O (On) or P (Off).
Select O (On) if the Destination city uses daylight saving time.
9
Press the 4 button.
The [World Time] setting is saved.
10
Press the 3 button twice.
The camera returns to A mode or Q mode.
Select W (Hometown) in step 4 to set the city and DST setting for the
Hometown city.
To Display the Time of the Destination (Select Time)
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [World
Time].
3
Press the four-way controller (5).
The [World Time] screen appears.
4
Use the four-way controller (23) to select [Select Time].
Wo r l d Ti m e
S e l e c t Ti m e
D e s t i n a t i o n
L o n d o n
H o m e t o w n
N e w Yo r k
MENU
DST
1 9 : 2 5
DST
1 4 : 2 5
5
Press the four-way controller (5).
A pull-down menu appears.
7
209
7
6
Use the four-way controller (23)
to select X (Destination) or W
(Hometown).
X Displays the time of the Destination city
W Displays the time of the Hometown city
Wo r l d Ti m e
S e l e c t Ti m e
D e s t i n a t i o n
L o n d o n
H o m e t o w n
N e w Yo r k
MENU Cancel
7
Press the 4 button.
The setting is saved.
8
Press the 3 button twice.
The camera returns to A mode or Q mode.
When X (Destination) is selected in step 6, the X icon appears on the display to indicate that the destination date and time are displayed in A mode.
DST
1 9 : 2 5
DST
1 4 : 2 5
OK O K
210
Changing the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
The camera supports the following 20 languages: English, French,
German, Spanish, Portuguese, Italian, Dutch, Japanese, Danish,
Swedish, Finnish, Polish, Czech, Hungarian, Turkish, Greek, Russian,
Thai, Korean, and Chinese (traditional and simplified).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Language/ ].
3
Press the four-way controller (5).
The [Language/ ] screen appears.
4
Use the four-way controller
(2345) to select the language.
E n g l i s h
Deutsch
D a n s k
Svenska
S u o m i
P o l s k i
I t a l i a n o
Nederlands
MENU C a n c e l
Magyar
OK O K
5
Press the 4 button.
The menus and messages are displayed in the selected language.
7
211
Changing the Rule for Naming Folders
You can change the naming rule of the folder for storing images. When the naming rule is set to the date, pictures are saved in separate folders by the date they were taken.
Date xxx_mmdd (3-digit folder number_month day)
* xxx_ddmm (3-digit folder number_day month) when the date format is set to [dd/mm/yy]
Standard xxxPENTX (where xxx is the 3-digit folder number)
Taken with the folder name setting [Standard].
(e.g. September 25)
DCIM
Taken with the folder name setting [Date].
(e.g. September 25)
DCIM
100
100PENTX
100
100PENTX
101
101_0925
• Up to 900 folders can be created.
• Up to 9999 images or sounds can be saved in a folder.
Next time, taken with the folder name setting [Date] again.
(e.g. October 1)
DCIM
100
100PENTX
101
101_0925
102
102_1001
7 1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Folder
Name].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select [Standard] or [Date].
5
Press the 4 button.
The setting is saved.
212
Changing the Video Output Format
When you connect the camera to AV equipment, choose the appropriate video output format (NTSC or PAL) for taking and playing back images.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Video Out].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select a video output format.
Choose the video output format to match the output format of the AV equipment.
Setting
USB Connection M S C
Video Out
Brightness Level
N T S C
PA L
Power Saving 5 sec.
Auto Power Off 3 min.
Quick Zoom
2 / 3
MENU Cancel OK OK
5
Press the 4 button.
The setting is saved.
7
Depending on the country or region, images and sound files may fail to be played back if the video output format is set differently from the one in use there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.168
Video Output Format by City 1p.260
213
7
Adjusting the Brightness of the Display
You can adjust the brightness of the display.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Brightness
Level].
3
Use the four-way controller (45) to adjust the brightness.
Setting 2 / 3
F Dark
G Normal
H Bright
USB Connection M S C
Video Out
Brightness Level
N T S C
Power Saving 5 sec.
Auto Power Off 3 min.
Quick Zoom
MENU Exit
4
Press the 3 button.
The camera returns to A mode or Q mode.
The display appears with the set brightness.
214
Using the Power Saving Function
You can save battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the display returns to the ordinary brightness if any button is pressed.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Power
Saving].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select the time until the camera enters power saving mode.
Choose from [2min.], [1min.], [30sec.],
[15sec.], [5sec.] or [Off].
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
2 min.
1 min.
3 0 sec.
1 5 sec.
5 sec.
Off
2 / 3
MENU Cancel OK OK
5
Press the 4 button.
The setting is saved.
7
• Power Saving does not function in the following situations:
• While taking pictures in the continuous shooting mode
• In the playback mode
• During movie recording/playback
• While the camera is connected to a computer
• When using the AC adapter
• While a menu is being displayed
• While using the VIDEO output
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
215
7
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is performed for a fixed time.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Auto Power
Off].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select the time until the camera turns off automatically.
Choose from [5min.], [3min.] or [Off].
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
M S C
N T S C
2 / 3
5 min.
3 m i n .
Off
MENU Cancel OK OK
5
Press the 4 button.
The setting is saved.
Auto Power Off does not function in the following situations:
• While taking pictures in the continuous shooting mode
• While recording a movie
• During a slideshow or movie/sound playback
• While the camera is connected to a computer
216
Setting the Quick Zoom Function
While playing back images in Q mode, you can set whether to use
Quick Zoom to enlarge the playback image to 10× when pressing the y button once.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Quick
Zoom].
3
Use the four-way controller (45) to
switch between O (On) or P (Off).
Setting
O (On) : The Quick Zoom is available.
P (Off) : The Quick Zoom is not available.
USB Connection M S C
Video Out
Brightness Level
Power Saving
N T S C
5 sec.
Auto Power Off 3 min.
Quick Zoom
2 / 3
MENU Exit
4
Press the 3 button.
The camera returns to A mode or Q mode.
7
217
7
Setting the Guide Display
Set whether to display the guide for the Capture Mode Palette or
Playback Mode Palette.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Guide
Display].
3
Use the four-way controller (45) to
switch between O (On) or P (Off).
Setting
O (On) : The mode guides are displayed.
P (Off) : The mode guides are not displayed.
Guide Display
Reset
Delete all
Pixel Mapping
Format
3 / 3
MENU Exit
4
Press the 3 button.
The camera returns to A mode or Q mode.
218
Perform Pixel Mapping
Pixel mapping is a function for mapping out and correcting for defective pixels in the CCD sensor.
• Pixel Mapping is only available in A mode. Pixel mapping cannot be selected even if the [W Setting] menu is displayed by pressing the
3 button in Q mode.
• When executing Pixel Mapping from Q mode, press the Q button once to enter A mode. Then press the 3 button and the fourway controller (5) to display the [W Setting] menu and select Pixel
Mapping.
• Pixel Mapping cannot be selected in Voice Recording mode.
1
Press the 3 button in A mode, and then press the
four-way controller (5) once.
The [W Setting] menu appears.
2
Use the four-way controller (23) to select [Pixel
Mapping].
3
Press the four-way controller (5).
The [Pixel Mapping] screen appears.
4
Use the four-way controller (2) to select [Pixel Mapping].
Pixel Mapping
Checks the image sensor and then adjust
7
Pixel Mapping
Cancel
OK
5
Press the 4 button.
Defective pixels are mapped and corrected.
When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC78 (optional) or use a battery with ample capacity remaining.
219
7
Changing the Start-up Screen
You can choose the start-up screen displayed when the camera is turned on.
You can choose any of the following images as the start-up screen:
• The Guide Display Start-up Screen showing a guide to the shooting modes and buttons
• Optio logo (3-types)
• One of your own images (compatible images only)
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select ^ (Start-up
Screen).
For setting a captured image as the Start-up
Screen
MENU OK
3
Press the 4 button.
The image selection screen appears.
4
Use the four-way controller (45) to choose the image for the startup screen.
Only images suitable for the start-up screen are displayed. You can also choose one of the
3 PENTAX logos or the Guide Display Startup Screen already stored in the camera.
5
Press the 4 button.
The setting is saved.
MENU OK
• Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card is formatted.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when you turn the camera on in the playback mode.
• Images or movies taken at start-up screen.
16:9 , 3:2 , and F cannot be used for the
220
Resetting to Default Settings (Reset)
You can reset the camera settings to their defaults. Refer to “Default
Settings” (p.255) for the reset settings.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
2
Use the four-way controller (23) to select [Reset].
3
Press the four-way controller (5).
The [Reset] screen appears.
4
Use the four-way controller (2) to select [Reset].
R e s e t
R e s e t t o i n i t i a l s e t t i n g ?
R e s e t
C a n c e l
OK O K
5
Press the 4 button.
The settings return to the defaults.
The following settings are not affected by resetting:
• Date Adjustment
• World Time
• Language/
• Video Out
7
221
Displaying the Clock Mode
You can use the camera as a clock. With the camera turned off, press and hold down the 4 button to display the clock on the display.
7
1
Press and hold down the 4 button.
The camera turns on and the clock appears on the screen.
The camera turns off automatically after approximately 10 seconds.
Pressing the power switch turns the camera off immediately.
4 button
222
8
Connecting to a
Computer
Setting Up Your Computer ..................... 224
Connecting to a Windows PC ................ 232
Connecting to a Macintosh .................... 240
Setting Up Your Computer
By installing the software included on the provided CD-ROM on your computer and connecting the camera to your computer with the USB cable, you can transfer images and movies captured with your camera to the computer and then display and manage them. This section explains how to install the provided software and the other necessary preparations for enjoying the captured pictures and movies on your computer.
Provided Software
The following software is included in the CD-ROM (S-SW87).
8
Windows
• Image viewing/managing/editing software “ACDSee for PENTAX 3.0”
(Nine languages: English, French, German, Spanish, Italian, Russian,
Chinese [traditional and simplified], Korean, and Japanese)
Macintosh
• Image viewing/managing software “ACDSee 2 for Mac”
(Six languages: English, French, German, Spanish, Italian, and
Japanese)
We recommend using the optional AC adapter kit K-AC78 when the
camera is connected to a computer (p.37). If the battery runs out of
power while images are being transmitted to a computer, the image data may be lost or damaged.
224
System Requirements
The following system requirements must be met for you to fully enjoy the images and movies captured with the camera on your computer.
Windows
OS
CPU
Memory
Hard disk space
Others
Windows 2000, Windows XP, or Windows Vista
• The OS must be preinstalled and updated to the latest version.
Pentium III or higher (Pentium 4 or higher recommended)
256 MB minimum (1 GB or more recommended)
100 MB minimum (1 GB or more recommended)
CD-ROM drive
USB port as standard equipment
Internet Explorer 5.0 or later
DirectX 9.0 or later and Windows Media Player 9.0 or later (for playing movies)
* Operation is not guaranteed on all computers meeting the system requirements.
* The system requirements describe the minimum environment for playing and editing movies.
Windows 95, Windows 98, Windows 98SE, Windows Me, and Windows
NT are not supported.
The versions of Internet Explorer, Windows Media Player and DirectX required for using “ACDSee for PENTAX 3.0” are not included in the provided CD-ROM (S-SW87). Visit the following sites to download the necessary items and install/update them on your computer.
• Internet Explorer http://www.microsoft.com/windows/products/winfamily/ie/ default.mspx
• Windows Media Player http://www.microsoft.com/windows/products/winfamily/mediaplayer/ default.mspx
• DirectX http://www.microsoft.com/windows/directx/default.mspx
8
225
Macintosh
OS
CPU
Memory
Hard disk space
Others
Mac OS X (Ver.10.3-10.5)
• The OS must be preinstalled and updated to the latest version.
* When you connect the camera to a Macintosh without using the provided software, Mac OS X
(Ver.10.1.2-10.5) is available.
Power Macintosh 233 MHz or higher (PowerPC G5 or higher recommended)
8 MB minimum (1 GB or more recommended)
6 MB minimum (1 GB or more recommended)
CD-ROM drive
USB port as standard equipment
QuickTime 4.0 or later
* Operation is not guaranteed on all computers meeting the system requirements.
* The system requirements describe the minimum environment for playing and editing movies.
Installing the Software
Windows
Install the image viewing/managing/editing software (ACDSee for
PENTAX 3.0).
8
• Make sure your Windows PC meets the system requirements before installing the software.
• When multiple accounts have been set up in Windows 2000, Windows
XP or Windows Vista, log on with an account that has administrative rights before installing the software.
1
Turn your Windows PC on.
2
Insert the CD-ROM into the CD-ROM drive.
The language selection screen appears.
226
If you are using Windows Vista
When the [AutoPlay] screen appears, display the language selection screen following the steps below.
1) Click [Run setup.exe].
2) Click [Allow].
If the language selection screen does not appear
Display the language selection screen following the steps below.
1) Double-click [My Computer] on the desktop.
2) Double-click the [CD-ROM drive (S-SW87)] icon.
3) Double-click the [Setup.exe] icon.
3
Choose a language from the displayed screen.
The “ACDSee for PENTAX 3.0” installation screen appears.
4
Click [Install].
The setup screen appears.
Follow the on-screen guidance to input registration information and install the software.
8
227
5
Click [Finish].
“ACDSee for PENTAX 3.0” installation is complete.
6
Click [Exit] on the installation screen.
The window closes.
7
Reboot your Windows PC.
Go to “Product Registration on the Internet” (p.230).
8
Macintosh
Install the image viewing/managing software (ACDSee 2 for Mac).
1
Turn your Macintosh on.
2
Insert the CD-ROM into the CD-ROM drive.
3
Double-click the CD-ROM (S-SW87) icon.
4
Double-click the [ACDSee Install] icon.
The language selection screen appears.
If the [Master Installer] icon appears, double-click it to display the language selection screen.
228
5
Choose a language from the displayed screen.
The “ACDSee 2 for Mac” installer screen appears.
6
Click [Install].
The setup screen appears.
Follow the on-screen guidance to input registration information and install the software.
7
When the screen shown on the right appears, click [Yes].
8
Click [Close].
“ACDSee 2 for Mac” installation is complete.
9
Click [Exit] on the installation screen.
The window closes.
8
229
Product Registration on the Internet
In order to better serve you, we request that you complete the product registration.
If your computer is connected to the
Internet, please click [Product
Registration] on the setup screen after the language selection screen is displayed.
The world map screen shown on the right for Internet Product Registration is displayed. Click the displayed country or region and then follow the instructions to register your product.
Only customers in countries and regions displayed on the software installation screen can register their products on the Internet Product
Registration.
Setting the Camera USB Connection Mode
Set the device to which the camera is connected with the USB cable.
8
Make sure to set the USB connection mode before connecting your camera to the computer. You cannot perform the following setting if the camera is already connected to your computer with the USB cable.
1
Turn the camera on.
2
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller (5) once.
3
Use the four-way controller (23) to select [USB
Connection].
230
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to select [MSC].
Setting 2 / 3
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
M S C
P T P
5sec.
3min.
MENU Cancel OK OK
6
Press the 4 button.
The setting is saved.
Go to the following pages depending on your computer.
Connecting to a Windows PC (p.232)
Connecting to a Macintosh (p.240)
MSC (Mass Storage Class) and PTP (Picture Transfer Protocol)
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the computer via USB as a memory device. Also indicates a standard for controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class, you can copy, read, and write files from a computer without installing a dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without installing a device driver.
8
Unless otherwise specified, select MSC when connecting the Optio W80 to your computer.
231
Connecting to a Windows PC
Connecting the Camera and a Windows PC
Connect your camera to the Windows PC using the provided USB cable
(I-USB7).
1
Turn your Windows PC on.
2
Turn your camera off.
3
Connect your camera to the Windows PC using the USB cable.
Connect the terminal of the USB cable with pointing toward the 4 on the PC/AV terminal on the bottom of the camera.
8 4
Turn the camera on.
The “Device Detector” screen appears.
If the “Device Detector” screen does not appear, follow the steps in
“When the “Device Detector” screen does not appear” (p.234).
The power lamp is lit while the camera is connected to a PC, whereas it blinks while the card is being accessed.
We recommend using the optional AC adapter kit K-AC78 when the
camera is connected to the computer (p.37). If the battery runs out of
power while images are being transmitted to the computer, the image data may be lost or damaged.
232
Transferring Images
Transfer the images captured with the camera to your Windows PC.
If there is no SD Memory Card in the camera, the images stored in the built-in memory will be transferred to your Windows PC.
5
Confirm that [Acquire images from the device with ACDSee] is checked and click [OK].
6
Click [Next].
7
Select an image to copy and click [Next].
8
Specify [File names] and
[Destination folder], and click
[Next].
The images are copied to your Windows
PC.
8
233
9
Click [Finish].
The “ACDSee for PENTAX 3.0” starts.
When the “Device Detector” screen does not appear
5
Double-click the [ACDSee for
PENTAX 3.0] icon on the desktop.
6
Click [My Computer].
8
7
Double-click [Removable Disk].
If the SD Memory Card has a volume label, the volume label name appears instead of [Removable Disk]. A new unformatted SD Memory
Card may show the manufacturer’s name or model number.
234
8
Double-click the [DCIM] folder.
Images are stored in folders named by the shooting date (“XXX_0202” for
February 2. “XXX” is a three-digit number.).
If [Standard] is selected for [Folder
Name] in the [W Setting] menu, a folder named “XXXPENTX” (XXX is a threedigit folder number) is displayed and images are stored here.
9
Select the folders you want to copy to the Windows PC.
10
Select [Copy To Folder...] from the [Edit] menu.
The “Copy Files” screen appears.
11
Specify the destination folder and click [OK].
The images are copied to your Windows
PC.
8
235
Disconnecting the Camera from Your Windows
PC
1
Double-click the [Safely
Remove Hardware] icon in the task bar.
The “Safely Remove Hardware” screen appears.
2
Select [USB Mass Storage
Device] and click [Stop].
The “Stop a Hardware device” screen appears.
3
Select [USB Mass Storage
Device] and click [OK].
A message appears indicating that the hardware can be safely removed.
8
4
Click [OK].
5
Disconnect the USB cable from your Windows PC and the camera.
• If the camera (removable disk) is being used by an application such as
“ACDSee for PENTAX 3.0”, the camera cannot be disconnected until the application is closed.
• The camera will automatically switch to the Playback Mode when the
USB cable is disconnected from your Windows PC or the camera.
236
Starting “ACDSee for PENTAX 3.0”
“ACDSee for PENTAX 3.0” lets you view, edit, manage, search for, share, and print images.
1
Double-click the [ACDSee for PENTAX 3.0] icon on the desktop.
ACDSee starts and the main browser window appears.
ACDSee Browser Interface
A
B
C
F
E
D
G
H
* The screen shown is an example with the default settings.
A Menu bar
Provides access to the various menu commands.
B Toolbar
Provides quick access to frequently used tasks and functions.
C Folders pane
Displays the configuration of folders in your computer. When you browse a folder, the contents of the folder appear in the File List pane.
8
237
D Preview pane
Displays a preview of the image or media file currently selected in the
File List pane. You can change the size of the preview image or play back the media file.
E File List pane
Displays the contents of the selected folder or the results of the most recent search (the file or folder that matches the search item). It is the only pane that always appears in the browser and it cannot be hidden or closed.
F Category pane
Displays a list of categories and priorities. By dragging and dropping files from the File List pane to here, you can set category and priority for files.
G Image Basket pane
Displays files selected in the File List pane. By choosing images and files and putting them in the Image Basket pane, you can use the editing and creating functions on images from different folders and categories.
H Status bar
Displays information and properties for the selected file.
8
Viewing Images
1
Select and click the folder containing the image you want to view in the Folders pane of the ACDSee browser.
Images are displayed in the File List pane.
2
Select and double-click the image you want to view in the File List pane.
The selected image is displayed with the viewer.
With the viewer, you can enlarge/ reduce the display size of the image or edit the image. You can also play back movies or sound files.
238
ACDSee Quick View
The image is displayed on the “ACDSee
Quick View” screen if you double-click the image file directly from the browser without starting ACDSee. (You cannot play back or display the file with ACDSee Quick View even if you double-click a movie or sound file.)
You can also enlarge/reduce the display size of the image on the “ACDSee Quick
View” screen.
Click [Full Viewer] on the “ACDSee Quick View” screen to switch the display to the viewer.
Click [Photo Manager] to switch the display to the ACDSee browser.
Details on How to Use “ACDSee for PENTAX 3.0”
You can find more information on how to use “ACDSee for PENTAX 3.0” by using the help pages.
1
Click the [?] icon at the top right of the screen.
The help screen appears.
2
Double-click the desired topic.
The explanation is displayed.
8
239
Connecting to a Macintosh
Connecting the Camera and a Macintosh
Connect your camera to the Macintosh using the provided USB cable (I-USB7).
1
Turn your Macintosh on.
2
Turn your camera off.
3
Connect your camera to the Macintosh using the USB cable.
Connect the terminal of the USB cable with pointing toward the 4 on the PC/AV terminal on the bottom of the camera.
8
4
Turn your camera on.
The camera is recognized as [NO_NAME] on the desktop.
• If the SD Memory Card has a volume label, the volume label name appears instead of [NO_NAME]. A new unformatted SD Memory Card may show the manufacturer’s name or model number.
• The power lamp is lit while the camera is connected to a Macintosh, whereas it blinks while the card is being accessed.
We recommend using the optional AC adapter kit K-AC78 when the
camera is connected to the computer (p.37). If the battery runs out of
power while images are being transmitted to the computer, the image data may be lost or damaged.
240
Transferring Images
Transfer the images captured with the camera to your Macintosh.
If there is no SD Memory Card in the camera, the images stored in the built-in memory will be transferred to your Macintosh.
5
Specify a save location, make sure that [Launch ACDSee] is checked, and click [Download].
After images are copied to your
Macintosh, the “ACDSee 2 for Mac” starts.
When [Delete images from device] is checked, images are deleted from the camera after transfer is complete.
Disconnecting the Camera from Your Macintosh
1
Drag [NO_NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name to the trash.
2
Disconnect the USB cable from your Macintosh and the camera.
8
• If the camera (removable disk) is being used by an application such as
“ACDSee 2 for Mac”, the camera cannot be disconnected until the application is closed.
• The camera will automatically switch to the Playback Mode when the
USB cable is disconnected from your Macintosh or the camera.
241
Starting “ACDSee 2 for Mac”
“ACDSee 2 for Mac” lets you display and manage images.
1
Double-click the [ACDSee] folder inside the
[Applications] folder.
2
Double-click the [ACDSee 2 for Mac] icon.
ACDSee starts and the main browser window appears.
ACDSee Browser Interface
A
B
C
D
E
8
F
G
A Menu bar
Provides access to the various menu commands.
B Toolbar
Provides quick access to frequently used tasks and functions.
C Folders pane
Displays the configuration of folders in your Macintosh. When you browse a folder, the contents of the folder appear in the File List pane.
D Preview pane
Displays a preview of the image or media file currently selected in the
File List pane. You can change the size of the preview image or play back the media file.
242
E Favorites pane
You can add frequently used items (folders, etc.).
F File List pane
Displays the contents of the selected folder or the results of the most recent search (the file or folder that matches the search item). It is the only pane that always appears in the browser and it cannot be hidden or closed.
G Status bar
Displays information and properties for the selected file.
Viewing Images
1
Select and click the folder containing the image you want to view in the Folders pane of the ACDSee browser.
Images are displayed in the File List pane.
2
Select and double-click the image you want to view in the File List pane.
The selected image is displayed.
You can enlarge/reduce the display size of the image.
8
Details on How to Use “ACDSee 2 for Mac”
You can find more information on how to use “ACDSee 2 for Mac” by using the help pages.
1
Select [ACDSee 2 for Mac] from [Help] on the menu bar.
The help screen appears.
2
Click the desired topic.
The explanation is displayed.
243
244
Memo
9
Appendix
Functions Available for Each Shooting
Mode ......................................................... 246
Messages ................................................. 251
Troubleshooting ...................................... 253
Default Settings ....................................... 255
List of World Time Cities ........................ 260
Optional Accessories ............................. 261
Main Specifications ................................ 262
Index ......................................................... 271
Functions Available for Each Shooting
Mode
9
√: Can be set. ×: Cannot be set. : Settings and changes are not applied.
Function
Face Priority On
Shooting Mode b
√ e
√
A
√
C
√ √
√ Smile Capture
Face Priority Off
Blink Detection
Flash
, (Auto) a (Flash Off) b (Flash On) c (Auto + Red-eye) d (Flash On + Red-eye) b (Soft Flash)
9 (Standard) g (Self-timer)
√
√
√
√
√
√
×
√
√
√
√
×
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
√
√
×
√
√
√
√
√
×
×
√
√
×
√
×
×
×
√
√
×
√
×
×
√
√
√
√
√
√
√
√
Drive
Mode
Focus
Mode
Z (2 sec. Self-timer) j (Continuous Shooting) c (Burst Shooting) k (Interval Shoot) a (Auto Bracket)
= (Standard) q (Macro)
(1cm Macro) s (Infinity)
3 (Pan Focus)
\ (Manual Focus)
Image Tone
Shake reduction*1
Recorded Pixels
Quality Level
White Balance
AF Setting
Focusing Area
Auto Macro
Focus Assist
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
D-Range
Setting
Highlight Correction
Shadow Correction
Zoom
Sharpness
Saturation (Tone Adjustment)
Contrast
Date Imprint
×
√
√
√
√
√
×
√
× *2
√
√
√
× *12
× *18
√
√
× *21
√
√
×
*17
×
*22
× *22
√
*23
× *28
×
*28
×
*28
√
√
√
√
*24
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
*24
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
*25
√
√
√
√
√
√
√
√
√
×
√
√
× *10
√
√
*19
√
×
*22
× *21
× *13
× *15
√
√
× *21
√
√
√
√
√
√
*24
√
√
√
√
√
√
√
√
× *2
√
√
√
√
√
√
√
√
√
× *12
√
√
√
× *28
×
*28
×
*28
√
246
√
√
√
× *2
√
√
√
√
×
√
√
× *10
× *12
√
*19
√
×
*22
×
×
√
×
×
×
√
√
√
√
×
×
√
√
× *21
× *13
× *15
√
√
√
√
*25
× *28
×
*28
×
*28
× *12
√
√
√
× *21
√
√
√
√
√
√
*24
× *28
×
*28
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
× *2
√
√
√
√
√
√
H
√
√
√
√
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
I
√
√
√
× *28
× *28
√
×
√
√
√
√
√
√
√
√
√
√
√
√
√
× *4
√
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
P X Q c R
√ √ √ √ √
√
×
√
√
√
√
√
√
√
×
× *28
× *28
√
×
√
√
×
×
√
√
√
×
√
×
*22
√
√
√
×
√
√
√
√
√
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
× *28
× *28
√
× *13
× *16
√
√
√
√
√
√
√
*26
√
√
√
√
√
× *5
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
× *28
× *28
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
Y
√
√
√
× *28
× *28
√
Shooting Mode
Function
Face Priority On
Smile Capture
Face Priority Off
Blink Detection
, (Auto) a (Flash Off) b (Flash On) c (Auto + Red-eye) d (Flash On + Red-eye) b (Soft Flash)
9 (Standard)
Flash g (Self-timer)
Z (2 sec. Self-timer) j (Continuous Shooting) c (Burst Shooting) k (Interval Shoot) a (Auto Bracket)
= (Standard) q (Macro)
(1cm Macro) s (Infinity)
3 (Pan Focus)
\ (Manual Focus)
Image Tone
Shake reduction*1
Drive
Mode
Focus
Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
Auto Macro
Focus Assist
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
Highlight Correction
Shadow Correction
Zoom
Sharpness
AF Setting
Saturation (Tone Adjustment)
Contrast
Date Imprint
D-Range
Setting
9
247
9
Function
Face Priority On
Smile Capture
Face Priority Off
Blink Detection
Flash
Shooting Mode
, (Auto) a (Flash Off) b (Flash On) c (Auto + Red-eye) d (Flash On + Red-eye) b (Soft Flash)
9 (Standard)
Drive
Mode g (Self-timer)
Z (2 sec. Self-timer) j (Continuous Shooting) c (Burst Shooting) k (Interval Shoot) a (Auto Bracket)
= (Standard) q (Macro)
(1cm Macro) Focus
Mode s (Infinity)
3 (Pan Focus)
\ (Manual Focus)
Image Tone
Shake reduction*1
Recorded Pixels
Quality Level
White Balance
Focusing Area
AF Setting Auto Macro
Focus Assist
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
D-Range
Setting
Highlight Correction
Shadow Correction
Zoom
Sharpness
Saturation (Tone Adjustment)
Contrast
Date Imprint
√
√
√
√
√
√
×
*2
×
*22
√
√
√
√
√
√
√
√
√
√
√
√
√
√
C \
√ √
√
×
√
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
× *6
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
× *28
× *28
√
× *28
× *28
√
248
B
√
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
√
√
√
×
√
√
√
× *28
× *28
√
U
√
√
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
× *28
× *28
√
×
×
×
*2
×
*22
√
√
×
*12
× *18
× *22
×
*21
× *14
√
√
√
√
*24
×
*28
× *28
× *28
√
×
×
×
√
×
×
×
×
√
√
√
×
×
×
√
×
√
×
S
√
√
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
K
√
√
√
× *28
× *28
√
√
√
√
×
*12
√
√
√
×
*21
√
√
√
*24
√
√
√
×
*28
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*2
√
√
√
√
B
√
√
√
× *28
× *28
√
√
√
√
*24
√
√
√
√
√
√
√
× *6
√
√
√
*19
√
√
√
×
√
×
√
√
√
√
√
√
√
×
*22
√
√
√
×
√
√
√
√
√
√
F N
√ √
√
√
√
√
√
√
√
×
√
√
√
√
√
√
√
×
√
√
√
√
×
×
√
√
√
×
*22
√
√
√
*24
√
√
√
√
√
√
√
√
√
√
√
× *7
√
√
√
× *8
√
×
*12
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
*21
√
× *16
√
√
√
√
*26
×
*28
× *28
× *28
√
× *13
× *15
×
*17
×
*22
× *22
√
*27
×
*28
× *9
× *11
×
*12
× *18
× *20
× *20
×
*21
× *28
× *28
×
*22
√
×
×
×
×
*3
×
*22
×
√
√
×
×
×
√
√
√
×
×
×
√
√
√
×
9
√
√
√
Shooting Mode
Face Priority On
Smile Capture
Face Priority Off
Blink Detection
, (Auto) a (Flash Off) b (Flash On) c (Auto + Red-eye) d (Flash On + Red-eye) b (Soft Flash)
9 (Standard)
Function
Flash g (Self-timer)
Z (2 sec. Self-timer) j (Continuous Shooting) c (Burst Shooting) k (Interval Shoot) a (Auto Bracket)
= (Standard) q (Macro)
(1cm Macro) s (Infinity)
3 (Pan Focus)
\ (Manual Focus)
Image Tone
Shake reduction*1
Drive
Mode
Focus
Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
Auto Macro
Focus Assist
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
Highlight Correction
Shadow Correction
Zoom
Sharpness
AF Setting
Saturation (Tone Adjustment)
Contrast
Date Imprint
D-Range
Setting
9
249
9
250
*1 Movie SR is used for movies, while
Pixel Track SR is used for still pictures
*2 Fixed at Natural
*3 Fixed at Bright
*4 Fixed to h for individual pictures, and fixed to f for composite images.
*5 Fixed to f
*6 Fixed to h
*7 Fixed to i for individual pictures.
*8 Fixed to V
*9 Fixed to E
*10 Fixed to C (Best) equivalent
*11 Fixed to D (Better)
*12 Fixed to F
*13 Fixed to AUTO
*14 Fixed to 64
*15 Fixed at 64-800
*16 Fixed at 64-6400
*17 Fixed at ±0.0
*18 Fixed to J (Multi)
*19 W (Automatic Tracking) is not available.
*20 Fixed to O (On)
*21 Fixed to L (Multi-segment metering)
*22 Fixed to P (Off)
*23 Flowers cannot be detected when using Digital Zoom or Intelligent Zoom.
*24 Optical zoom is always possible, digital zoom and intelligent zoom cannot be used if the Sensitivity selection is ISO 3200 or higher.
*25 Before shooting only optical zoom and digital zoom are possible, during shooting only digital zoom is possible.
*26 Only optical zoom is possible, digital zoom and intelligent zoom cannot be used.
*27 Only optical zoom and digital zoom are possible, intelligent zoom cannot be used.
*28 Fixed as standard
Messages
Messages such as the following may appear on the display during camera operation.
The card memory is not enough to copy images/ sounds
Image folder cannot be created
Message
Battery depleted
Memory card full
Memory card error
The built-in memory is not formatted
Card is not formatted
Card is locked
Compression error
No image/sound
Movie recording stopped
Deleting
Camera cannot play this image and sound
Protected
Description
The battery is exhausted. Charge the battery using the
The SD Memory Card is full and no more images can be saved.
Insert a new SD Memory Card or delete unwanted images.
Change the recorded pixels or quality level of recorded
Shooting and playback are impossible due to a problem with the SD Memory Card. You may be able to display or copy the images on the card using a computer.
The data within the built-in memory are damaged. Format the built-in memory.
The SD Memory Card you have inserted is unformatted or has been formatted on a computer or other device and is not compatible with this camera. Format the SD Memory
The SD Memory Card is write-protected (p.41).
This message occurs when the camera fails to compress an image. Change the quality level or recorded pixels of the image and try shooting or saving it again.
There are no image or sound files on the SD Memory Card or the built-in memory.
This message appears when the internal temperature of the camera has exceeded normal operating limits while recording a movie.
This message appears when deleting an image or sound file.
You are trying to play back an image or sound in a format not supported by this camera. You may be able to play it back on another brand of camera or on your computer.
The largest file number (9999) has been assigned to an image in the largest folder number (999) and no more images can be saved. Insert a new SD Memory Card or
The image or sound file you are trying to delete is protected.
9
251
9
Message
Data being recorded
Data being processed
Description
Displayed when you try to switch to Q mode while an image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images or sound files.
Built-in memory full
No image to be processed
This image/sound cannot be processed
No card in the camera
The built-in memory is not enough to copy images/sounds
Cannot process correctly
Display image/sound from built-in memory
Not enough battery power remaining to activate Pixel Mapping
Displayed for files that cannot be processed.
Displayed if no SD Memory Card is inserted when “Image/
Sound Copy” is selected from the Playback Mode Palette and the OK button is pressed.
Displayed when there is insufficient built-in memory to perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters the built-in memory display.
Displayed when the batteries are too low during Pixel
Mapping. Change the batteries (p.34) or use the AC
adapter kit K-AC78 (optional) (p.37).
252
Troubleshooting
Problem
The camera will not turn on
Cause
The battery is not installed
The battery is installed incorrectly
Remedy
Check if a battery is installed. If not, install a battery.
Check orientation of the battery. Reinsert the battery according to the +- symbols
in the battery compartment (p.34).
No image appears on the display
The battery is exhausted
The camera is connected to a computer
The camera is connected to a TV
The display is set to off.
The brightness level of the display is set too dark
The display is hard to see
Charge the battery.
The display is off when the camera is connected to a computer.
The display is off when the camera is connected to a TV.
Press the 4/W button to turn the display on.
Adjust the brightness level in [Brightness
Level] in the [W Setting] menu. (p.214)
Power Saving function is on
The flash is charging
When the Power Saving function is on, the display automatically darkens after a certain amount of time. Press a button to return to the normal brightness level.
Select [Off] in [Power Saving] in the [W
Setting] menu to turn the Power Saving
Pictures cannot be taken while the flash is charging. Wait until charging is finished.
The shutter will not release
The picture is dark when using the flash
There is no available space on the SD
Memory Card or in the built-in memory
Recording
The subject is too far away in a dark environment, such as a night scene
Insert an SD Memory Card with available
space or delete unwanted images (p.39,
Wait until recording is finished.
The picture becomes dark if the subject is too far away. Take pictures within the specified flash range.
9
253
9
Problem
The subject is not in focus
Cause
The subject is difficult to focus on with autofocus
The subject is not in the focusing area
Remedy
The camera may have difficulty in focusing on such subjects as: low contrast subjects (a white wall, a blue sky, etc.), dark subjects, finely-patterned objects, rapidly-moving objects. It is also difficult to get proper focus when shooting through a window or a net
(p.68). Try shooting using the focus lock,
Locate the desired subject in the focus frame (focusing area) in the center of the display. If it is difficult to do so, first lock the focus on the desired subject (focus lock), and then move the camera to recompose.
The flash does not discharge
The flash mode is set to a (Flash Off)
The Drive Mode is set to j (Continuous
Shooting), c (Burst
Shooting), or l (Auto
Bracket); the Focus
Mode is set to s
(Infinity); or the
Shooting Mode is set to d (Movie),
(Underwater Movie), or S (Fireworks).
Set to , (Auto) or b (Flash On) (p.103).
The flash does not discharge in these modes.
Very occasionally, static electricity may cause camera to malfunction. In this case, remove the battery and install it again. If the camera is then working properly, you can continue using the camera.
254
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the
No camera is turned off.
: The setting returns to the default setting when the camera
*
— is turned off.
: The setting depends on the [Memory] setting (p.143).
: N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset
No
—
: The setting is saved even after reset.
: N/A
[A Rec. Mode] Menu Items
Item
Image Tone
Pixel Track SR
Recorded Pixels
Quality Level
White Balance
Focusing Area
AF
Setting
Auto Macro
Focus Assist
AE Metering
Sensitivity
ISO Corction in AUTO
EV Compensation
Default Setting
(Shooting mode:A)
E
Bright
P (Off)
(4000×3000)
D (Better)
F (Auto)
J (Multiple)
O (On)
O (On)
L (Multi-segment)
AUTO (64-800)
64-800
±0.0
*
*
*
*
*
Yes
Yes
Yes
Last
Memory
Setting
Yes
Yes
Yes
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
9
255
9
Item
Recorded Pixels
Movie
D-Range
Setting
Interval
Shoot
Movie SR
Interval
Shoot
Interval
Total Time
Start
Delay
Highlight Correction
Shadow Correction
Interval
Number of Shots
Start Delay
Blink Detection
Digital Zoom
Instant Review
Face Priority
Flash Mode
Drive Mode
Focus Mode
Zoom Position
Memory
MF Position
White Balance
Sensitivity
EV Compensation
AE Metering
Digital Zoom
DISPLAY
File No.
Green Button
Sharpness
Saturation
Tone Adjustment
Contrast
Date Imprint
Default Setting
(Shooting mode:A)
Last
Memory
Setting
1280
(1280×720/30 fps)
O (On)
1 min.
10 min.
Yes
Yes
Yes
Yes
In 0 hr. 0 min.
P
P
(Off)
(Off)
0 min. 10 sec.
2
In 0 hr. 0 min.
O (On)
O (On)
O (On)
P (Off)
O (On)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
P (Off)
O (On)
P (Off)
O (On)
Green Mode
G (Normal)
G (Normal)
G (B&W)
G (Normal)
P (Off)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
*
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
256
[W Setting] Menu Items
Sound
Date
Adjustment
Alarm
World
Time
Language/
Folder Name
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete all
Pixel Mapping
Format
Item
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
Date Format (Date)
Date Format (time)
Date
Time
Alarm
Time
Select Time
Destination (City)
Destination (DST)
Hometown (City)
Hometown (DST)
Default Setting
3
3
1
1
1
1
According to initial setting
24h
1/1/2009
According to initial setting
P (Off)
0:00
Same as W
Hometown
According to initial setting
According to initial setting
According to initial setting
According to initial setting
According to initial setting
Date
MSC
According to initial setting
G
5 sec.
3 min.
P (Off)
O (On)
Cancel
Cancel
Cancel
Cancel
Last
Memory
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Reset
Setting
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Page
9
257
9
Playback Mode Palette Items
Slideshow
Interval
Screen Effect
Sound Effect
Digital Filter
Frame Composite
Resize
Cropping
Protect
Item
Recorded Pixels
Quality Level
Image/Sound Copy
Image Rotation
Movie Edit
Save as Still image
Divide Movies
Red-eye Compensation
Voice Memo
Single Image/Sound
All Images/Sounds
DPOF
Single Image
All Images
Image Recovery
Start-up Screen
Default Setting
3 sec.
Wipe
On
B&W
Default1
Depending on the picture taken
Depending on the picture taken
Depending on the picture taken
Built-in memory →
SD Memory Card
Normal
Depending on the recorded image/ sound
Depending on the recorded image/ sound
Copies: 0
Date: Off
Cancel
Off
Last
Memory
Setting
Yes
Yes
Yes
No
Yes
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Page
258
Key Operation
Item Function
Q button Operation Mode w /x button Zoom Position
Default Setting
Q Mode
Full wide-angle
2 Drive Mode 9 (Standard)
Four-way controller
3 Shooting Mode b (Auto Picture)
4 Flash Mode , (Auto)
5
3 button
Focus Mode
Menu Display
= (Standard)
Shooting mode:
[A Rec. Mode] menu
Playback mode:
[W Setting] menu
4/W button
Information
Display
Standard
I button Operation Mode Face Priority On
Green Button Function Recall Green Mode
Last
Memory
Setting
*
*
Yes
*
*
*
*
Yes
Reset
Setting
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
9
259
List of World Time Cities
9
City: indicates cities that can be set as either the Initial Setting (p.45) or
Video Output Format: indicates the video output format of the city set as the initial setting.
Region
North
America
Central and
South
America
Europe
Africa/West
Asia
City name
Caracas
Buenos Aires
Sao Paulo
Rio de Janeiro
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Mexico City
Lima
Santiago
Warsaw
Athens
Helsinki
Moscow
Dakar
Algiers
Johannesburg
Video output format
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
Region
Africa/West
Asia
East Asia
Oceania
City name
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho Chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Perth
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Video output format
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
260
Optional Accessories
A number of dedicated accessories are available for this camera.
Products marked with an asterisk (*) are the same as those supplied with the camera.
Power supply
Rechargeable lithium-ion battery D-LI78 (*)
Battery charger kit K-BC78 (*)
(Battery charger D-BC78, AC plug cord)
AC adapter kit K-AC78
(AC adapter D-AC64, DC coupler D-DC78, AC plug cord)
The battery charger and AC adapter are only sold as a set.
Cable
USB cable I-USB7 (*)
AV cable I-AVC7 (*)
Strap
O-ST20 (*)
O-ST24
O-ST8
O-ST81
Genuine leather strap.
Silver chain strap.
Waterproof strap.
Camera case
O-CC79
O-CC81
Optio W80 Skin
O-CC932 This cover protects the camera from scratches and light impacts.
9
261
Main Specifications
9
Type
Number of effective pixels
Image sensor
Number of recorded pixels
Sensitivity
File format
Quality level
Storage media
Fully automatic compact digital still camera with built-in zoom lens
Approx. 12.1 megapixels
1/2.3 inch CCD
Still E
16:9
(4000×3000),
3:2
(4000×2672)
(4000×2256), 6 (3072×2304) f (2592×1944), h (2048×1536) l (1024×768), m (640×480) (pixels)
* Fixed at h (2048×1536) in Half-length Portrait mode.
* Fixed at f (2592×1944) in Digital SR mode.
* Fixed at h (2048×1536) in Frame Composite mode.
* Fixed at f (2592×1944) in Digital Wide mode (after stitching).
Fixed at h (2048×1536) for only the first frame (before stitching).
* Fixed at i (1600×1200) for one frame in Digital Panorama mode.
* Fixed at f (2592×1944) when the sensitivity is set to 3200 or
6400.
* Fixed at f (2592×1944) in Burst Shooting.
* Fixed at V (1280×960) in Report mode.
Movie 1280 (1280×720/30 fps), F (1280×720/15 fps)
G (640×480/30 fps), H (640×480/15 fps)
I (320×240/30 fps), J (320×240/15 fps)
AUTO, Manual (ISO 64-6400)
* The sensitivity is fixed at Auto (64-6400) in Digital SR mode.
Still JPEG (Exif 2.2), DCF 2.0, DPOF,
PRINT Image Matching III
Movie
Sound
AVI (Motion JPEG), approx. 30 fps/15 fps, PCM system, monaural sound, Movie SR (Movie Shake Reduction)
Voice memo, voice recording: WAVE (PCM) system, monaural
Still
Movie
C “Best”, D “Better”, E “Good”
Fixed at C (Best) *Unchangeable
Built-in memory (approx. 33.7 MB), SD Memory Card, SDHC Memory
Card
262
Approximate Image Storage Capacity and Recording Time
Still
E
3:2
16:9
4000×3000
4000×2672
4000×2256
6 3072×2304 f 2592×1944 h 2048×1536
V 1280×960 l 1024×768 m 640×480
C
7 pictures
8 pictures
9 pictures
11 pictures
13 pictures
21 pictures
49 pictures
74 pictures
154
Built-in Memory pictures
D
15 pictures
16 pictures
18 pictures
21 pictures
26 pictures
42 pictures
90 pictures
127 pictures
240 pictures
E
22 pictures
24 pictures
26 pictures
28 pictures
37 pictures
61 pictures
127 pictures
166 pictures
270 pictures
512 MB
SD Memory Card
C D
107 pictures
209 pictures
E
321 pictures
114 pictures
126 pictures
228 pictures
253 pictures
343 pictures
368 pictures
160 pictures
192 pictures
299 pictures
686 pictures
1042 pictures
299 pictures
368 pictures
592 pictures
1259 pictures
1777 pictures
397 pictures
530 pictures
863 pictures
1777 pictures
2324 pictures
2158 pictures
3358 pictures
3777 pictures
• The image storage capacity is for reference only. The actual image storage capacity may vary depending on the SD Memory Card and the subject.
• V (1280×960) can only be set for recorded pixels when (Report) mode is set.
Movie/Sound
1280
30
(1280×720/30 fps)
F (1280×720/15 fps)
G (640×480/30 fps)
H (640×480/15 fps)
I (320×240/30 fps)
J (320×240/15 fps)
Sound
Built-in Memory
10 sec.
21 sec.
32 sec.
1 min. 3 sec.
512 MB
SD Memory Card
2 min. 32 sec.
5 min. 5 sec.
7 min. 31 sec.
14 min. 48 sec.
51 sec.
1 min. 38 sec.
11 min. 59 sec.
22 min. 53 sec.
26 min. 44 sec.
6 hr. 14 min. 15 sec.
• The above figures are based on our standard shooting conditions and may vary depending on the subject, shooting conditions and type of the SD Memory Card used.
• Recording can continue until the built-in memory or the SD Memory Card is full, or the size of the recorded movie reaches 2 GB (when using an SDHC card). If recording stops at 2 GB, start recording again to continue to record the rest of the movie in blocks of 2 GB.
9
263
9
White balance
Lens
Optical zoom
Intelligent zoom
5×
6 : approx. 6.5x, f : approx. 7.7x, h : approx. 9.8x, l : approx.
19.5x, m : approx. 31.3x (when combined with optical zoom)
Digital zoom
Display
Max. approx. 6.25× (combines with 5× optical zoom to give zoom magnification equivalent to 31.3×)
Motion blur reduction Still
Movie
Digital pixel track, digital SR motion blur reduction
Movie shake reduction (Movie SR)
2.5 inch LCD, approx. 230,000 dots (AR coating)
Playback modes
Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual
Focal Length 5.0 - 25.0 mm
(approx. 28 mm - 140 mm in 35 mm equivalent focal length)
Aperture F3.5 (W) - F5.5 (T)
Lens Composition 11 elements in 9 groups (5 aspherical elements)
Zoom Type Electrically driven
Focus mode
Focus
Exposure control
Face priority
Shooting mode
Single-frame, 4-frame, 9-frame, Enlargement (max. 10×, scrollable),
Face Close-up Playback, Folder Display, Calendar Display, Sound
Playback, Histogram Display, Bright and Dark Area Compensation,
Select & Delete, Slideshow, Resize, Cropping, Image/Sound Copy,
Image Rotation, Digital Filter, Movie Playback/Edit (Save as Still image, Divide), Frame Composite, Red-eye Compensation, Voice
Memo, Protect, DPOF, Image Recovery, Start-up Screen
Autofocus, Macro, 1cm Macro, Pan Focus, Infinity, Manual Focus
Type
Focus range
(From lens face)
TTL contrast detection system by sensor
Multiple (9-point autofocus)/spot/automatic tracking AF changeable
Standard
Macro
: 0.5 m - ∞ (Full zoom range)
: 0.1 m - 0.6 m (Full zoom range)
1cm Macro : 0.01 m - 0.3 m
* It is possible to switch to Infinity, Pan Focus and
Manual Focus.
* Face Recognition AF is available only while the camera recognizes the subject’s face.
Focus Lock
AE Metering
EV
Compensation
By half-pressing the shutter release button
Multi-segment metering, Center-weighted metering, Spot metering
±2 EV (can be set in 1/3 EV steps)
Recognition of up to 32 people’s faces (up to 31 face recognition frames are shown on the display, 30 in Half-length Portrait mode),
Smile Capture, Blink Detection
* Face Recognition AE is available only while the camera recognizes the subject’s face.
Auto Picture, Program, Night Scene, Movie, Underwater, Underwater
Movie, Landscape, Flower, Portrait, Digital Wide, Surf & Snow, Digital
SR, Kids, Pets, Half-length Portrait, Sports, Fireworks, Candlelight,
Night Scene Portrait, Text, Food, Digital Panorama, Frame
Composite, Report, Green, Voice Recording (can be used when Fn
Setting assigned)
264
Digital filter
Movie
Shutter speed
Built-in flash
Drive mode
B&W, sepia, color (red, pink, purple, blue, green, yellow), color extraction (B&W+red, B&W+green, B&W+blue), color enhancer (Sky
Blue, Fresh Green, Delicate Pink, Autumn Leaves), toy camera, retro, soft, fish-eye, brightness
Continuous
Recording Time
Approx. 1 second - until built-in memory or SD Memory
Card is full (however, maximum size is limited to 2 GB)
1/1500 sec. - 1/4 sec., max. 4 sec. (Night Scene mode)
Modes
Flash Range
Auto, Flash Off, Flash On, Auto + Red-eye, Flash
On + Red-eye, Soft Flash
Wide-angle: approx. 0.3 m - 3.9 m
(approx. 0.98 ft - 12.8 ft) (Sensitivity: in Auto condition)
Telephoto: approx. 0.4 m - 2.5 m
(approx. 1.3 ft - 8.2 ft) (Sensitivity: in Auto condition)
Single-frame, Self-timer (approx. 10 sec., approx. 2 sec.), Continuous
Shooting, Burst Shooting, Interval Shoot, Auto Bracket
Self-timer
Time function
Power source
Dimensions
Weight
Accessories
Electronic control type, control time: Approx. 10 sec., 2 sec.
World Time 75 cities (28 time zones)
Clock Mode
Alarm
Clock display by holding down 4/W button while camera is turned off (approx. 10 sec.)
Alarm with simultaneous display of the Clock mode at specified time
Rechargeable lithium-ion battery D-LI78, AC adapter kit (optional)
Battery life Image Storage
Capacity
Approx. 170 pictures
* Recording capacity shows approximate number of shots recorded during CIPA-compliant testing
(with display on, flash used for 50% of the shots, and 23°C or 73.4°F). Actual performance may vary according to operating conditions.
* According to the results of in-house testing.
Playback Time
Approx. 180 min.
Movie
Recording Time
Approx. 65 min.
Sound
Recording Time
Approx. 230 min.
Interfaces USB 2.0 (high-speed compatible) /PC/AV terminal
Video output format NTSC/PAL (monaural)
Waterproof and dustproof rating
Impact resistance rating
JIS waterproof grade 8 and JIS dustproof grade 6 (IP68) Continuous underwater picture-taking possible for 2 hours at depth of 5 m.
PENTAX drop test (1 m height onto a 5 cm thick plywood surface) complying with MIL-Standard 810F Method 516.5-Shock testing.
* Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit.
* The camera is not guaranteed to be free of trouble or damages under every condition.
Approx. 99.5 (W) × 56.0 (H) × 24.5 (D) mm (excluding operating or protruding parts)
Approx. 135 g (excluding battery and SD Memory Card)
Approx. 150 g (including battery and SD Memory Card)
Rechargeable lithium-ion battery, battery charger, AC plug cord, USB cable,
AV cable, software (CD-ROM), strap, Operating Manual, Quick Guide
9
265
Warranty Policy
9
All PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized PENTAX service facilities.
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there is no representative of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
266
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
9
The CE Mark is a Directive conformity mark of the European
Union.
267
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
9
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply. The lithium battery used in this camera contains perchlorate material, which may require special handling. See www.dtsc.ca.gov/hazardouswaste/perchlorate
268
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: PENTAX Imaging Company
A Division of PENTAX of America, Inc.
Located at: 600 12 th Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number: Optio W80
Contact person: Customer Service Manager
Date and Place: July, 2009, Colorado
9
269
9
Information for Users on Collection and Disposal of Old
Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batteries should not be mixed with general household waste.
Used electrical/electronic equipments and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Following the implementation by member states, private households within the EU states may return their used electrical/electronic equipments and batteries to designated collection facilities free of charge*.
In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one.
*Please contact your local authority for further details.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a designation for the chemical element or compound in use. In this case you have to comply with the requirement set by the Directive for the chemicals involved.
270
Index
Symbols
A Mode ...................... 14, 56
I button ..................... 53, 55
Q
Mode ..................... 14, 56
Q
button .................... 52, 54
Menu ......................... 61, 255
[W Setting] Menu ....... 63, 257
9 Green Mode ................. 78
Delete ................. 146, 160
f
/y button ...................... 54
y
Magnify ....................... 157
x Tele ............................... 79
w
Wide ............................ 79
w
/x button ...................... 52
b Auto Picture ................. 75
A Night Scene ................. 82
B
C Half-length Portrait ....... 83
C
Movie .......................... 136
P
Portrait .......................... 83
Q Surf & Snow ................. 87
\ Sport ............................. 87
c Digital SR ................... 82
R
Kids ............................... 85
Y
Pet ................................ 86
R Program ....................... 77
S Fireworks ..................... 82
N
B Text ............................... 88
X
Digital Wide ............... 98
q Landscape ................... 71
I Flower ........................... 71
Underwater ................ 134
D Food ...............................71
Report ..........................72
Numerics
1cm Macro ....................105
A
AC adapter .........................37
ACDSee ...........................224
(Voice Memo) ..................196
AE Metering .....................118
Alarm ...............................205
(Flash) ..............................103
Auto Bracket a ................97
Auto Macro ......................109
Auto Picture Mode .............75
Auto Power Off ................216
(White Balance) ...............116
Auto , (Flash) .................103
AV cable ..........................168
B
B&W filter .........................175
Basic Mode ........................78
Battery Level Indicator .......36
Blink Detection ...........69, 126
Brightness filter ................175
Brightness Level ..............214
Built-in Memory ................185
Built-in memory display ......56
Burst Shooting ...................93
C
Calendar display ..............150
Camera shake .............23, 81
9
271
9
Candlelight Mode .............. 82
Capture Mode Palette ....... 71
Changing volume ............ 201
Charging a battery ............. 33
Memory Card ..................... 43
Clock Mode ..................... 222
Color enhancer filter ........ 175
Color extraction filter ....... 175
Color filter ........................ 175
AV Equipment ................. 168
Connecting to a TV .......... 168
Continuous Shooting ......... 93
Contrast ........................... 128
Copy ................................ 185
Cropping .......................... 173
D
Date Adjustment ........ 49, 203
Date Imprint ..................... 129
Daylight saving time .......... 48
Default Settings ............... 255
Delete all ......................... 163
Delete i ................. 146, 160
Deleting sounds ............... 161
Digital Filter ..................... 175
Digital SR Mode ................ 82
Digital Wide Mode ............. 98
Digital Zoom ...................... 81
Display brightness ........... 214
Display Language ............ 211
Dividing movies ............... 184
DPOF settings ................. 187
D-Range Setting .............. 122
Drive Mode ...... 92, 93, 95, 97
E
EV Compensation ........... 121
F
Face Priority .......................73
Face Recognition ...............73
Filters ...............................175
Fireworks Mode .................82
Fish-eye filter ...................175
Flash Mode ......................103
Flash Off a (Flash) .........103
Flash On b (Flash) .........103
(Flash) ..............................103
Flower ................................71
Focus Assist ....................110
Focus Mode .....................105
Focusing ..........................105
Focusing Area ..................108
Folder display ..................149
Folder Name ....................212
Food ...................................71
Format .............................200
Image Display ..................148
Four-way controller ......53, 55
Frame Rate ......................138
G
Green button ....................130
Green button X ...........53, 55
Green Mode .......................78
Guide Display ....................29
H
Half-length Portrait Mode ...83
Highlight Correction .........122
Histogram ..........................29
Hometown ..................48, 208
I
Image Recovery ...............164
272
Image Rotation ................ 156
Image Tone ..................... 111
Image/Sound Copy .......... 185
Infinity s ......................... 105
Initial Setting ...................... 45
Installation ....................... 226
Installing a battery ............. 34
Instant Review ........... 69, 126
Interval Movie Mode ........ 140
Interval Shoot k ...... 95, 124
K
Kids Mode ......................... 85
L
Landscape ......................... 71
Language setting ....... 45, 211
M
Macro q .......................... 105
Magnify y ....................... 157
Manual Focus \ ........... 105
(White Balance) ............... 117
Memory ........................... 143
3 button .............. 52, 54
Movie Edit ........................ 183
Reduction) Function ........ 139
Multi-segment
metering L ..................... 118
N
Night Scene Mode ............. 82
Mode ................................. 82
Number of pixels ............. 113
O
Operating the Menus .........57
Optional accessory ..........261
P
Pan Focus 3 .................105
Panoramic Pictures ..........100
Pet Mode ...........................86
Photo processing lab .......187
Pixel Mapping ..................219
Pixel Track SR .................112
Playback ..................146, 147
Playback (sound) .............194
Palette ......................152, 258
Playing back movies ........147
Portrait Mode .....................83
Power Saving ...................215
Power switch ..........43, 52, 54
(shutter release button) ......68
(shutter release button) ......68
Product Registration ........230
Program Mode ...................77
Protect Z ......................165
Provided Software ...........224
R
Recorded Pixels .......113, 138
Recording movies ............136
Recovering images ..........164
(Flash) ..............................103
9
273
9
Design ................................. 7
Report ................................ 72
Reset ............................... 221
Resetting settings ............ 221
Resize ............................. 172
Retro filter ........................ 175
Rotating ........................... 156
S
Saturation ........................ 128
(movie) ............................ 184
Saving pictures by date ... 212
Saving settings ................ 143
SD Memory Card ............... 39
Select Time ..................... 209
Self-timer g ...................... 92
Sensitivity ........................ 119
Sepia filter ....................... 175
Setting Menu ............. 63, 257
Shadow Correction .......... 123
Sharpness ....................... 127
Shooting information ......... 23
Shooting Mode .................. 70
Shutter release button .................... 52, 54, 68
Slideshow ........................ 153
Smile Capture .................... 73
Soft filter .......................... 175
Soft Flash b (Flash) ....... 103
Sound settings ................. 201
Sound types .................... 201
Specifications .................. 262
Sport Mode ........................ 87
Standard = ................... 105
Mode ................................. 44
Start-up screen ................ 220
274
Strap ..................................32
Surf & Snow Mode .............87
T
Taking pictures underwater .......................134
Text Mode ..........................88
Tone Adjustment ..............128
Toy camera filter ..............175
U
Underwater Mode ............134
Mode ................................134
USB Connection ..............230
V
.................................213, 260
Voice Memo .....................196
Voice Recording ..............192
W
Dustproof .........................134
White Balance ..................116
World Time ......................208
Z
Zoomxw .........................79
Memo
Memo
Memo
Unduh
Tautan publik diperbarui
Tautan publik ke obrolan Anda telah diperbarui. You may view and manage your chat links after registration here.
Tautan publik dokumen
Iklan