Editing Images
Changing the Image Size (Resize)
By changing the size and quality of a selected image, you can make the file size smaller than the original. You can use this function to continue taking pictures when the SD Memory Card or the built-in memory is full, by making the images smaller and overwriting the original images to make more space available.
• Images taken with 3:2 (4000×2672) or images and movies cannot be resized.
16:9 (4000×2256), panoramic
• You cannot select a larger resolution and higher Quality Level than that of the original image.
5
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to resize.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select n (Resize).
172
Changes Recorded Pixels and Quality Level to make the file size smaller
MENU OK
4
Press the 4 button.
The screen for choosing the image size appears.
5
Select [Recorded Pixels] and
[Quality Level].
Use the four-way controller (45) to choose the size and quality.
Use the four-way controller (23) to switch between [Recorded Pixels] and [Quality
Level].
MENU
Recorded Pixels 12 M
OK
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
7
Use the four-way controller (23) to select [Overwrite] or [Save as].
O v e r w r i t e
OK
8
Press the 4 button.
The resized image is saved.
Cropping Images
You can delete the unwanted part of a picture and save the cropped image as a separate image.
Images taken with 3:2 (4000×2672) or images and movies cannot be cropped.
16:9 (4000×2256), panoramic
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to crop.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select o (Cropping).
For cropping images to the size you like. Saved as a new image
MENU OK
5
173
5
4
Press the 4 button.
The cropping screen appears.
The largest size of the cropped image is shown with a green frame on the screen. The cropped image cannot be larger than this cropping frame size.
5
Choose the cropping area.
The following operations move the green frame and set the area for cropping on the screen.
Zoom button
(f/y)
Four-way controller
(2345)
Green Button
Changes the size of the cropped section
Moves the cropping position up, down, left and right
Rotates the cropping frame
• The button is only displayed when the cropping frame size can be rotated.
MENU OK
6
Press the 4 button.
The cropped image is saved with a new file name.
The number of recorded pixels is selected automatically according to the size of the cropped section. The image is saved at the same quality level as the original.
174
Using the Digital Filters
This mode lets you change the color tones and perform special processing on a selected image.
B&W filter
Sepia filter
Toy camera filter
Retro filter
Color filter
Color extraction filter
Color enhancer filter
Soft filter
Fish-eye filter
Brightness filter
Changes color images to black and white.
Processes the image using the sepia filter.
Images seem to have been taken with a toy camera.
Images have the feel of old photos with a white border.
You can choose from three filters: Original image, amber, and blue.
Processes the image using the selected color filter. You can choose from six filters: red, pink, purple, blue, green, and yellow.
Processes the image using the selected color extraction filter. You can choose from three filters: red, green, and blue.
There are four filters: Sky Blue/Fresh Green/Delicate
Pink/Autumn Leaves.
Processes the image into a soft image.
Applies a fish-eye lens effect to images.
Adjusts the brightness of the image.
5
Panoramic images, movies or images taken with another camera cannot be edited using Digital Filter function. An error message appears if you choose this function from the Playback Mode Palette and press the 4 button.
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to edit.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select P (Digital
Filter).
For modifying images with a Color filter or Soft filter
MENU OK
175
4
Press the 4 button.
The digital filter selection screen appears.
1 B&W filter
2 Sepia filter
3 Toy camera filter
4 Retro filter
5 Color filter
6 Color extraction filter
7 Color enhancer filter
8 Soft filter
9 Fish-eye filter
10 Brightness filter
MENU
5 4 3 2 1
6 7 8 9 10
OK
5
To Select a B&W Filter, Sepia Filter or Soft Filter
5
Use the four-way controller (23) to choose a digital filter you want to use.
The preview image of the results of the filter effect appears.
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
7
Use the four-way controller (23) to select [Overwrite] or [Save as].
Overwrite
OK
8
Press the 4 button.
The images processed with the filter are saved.
176
To Select a Retro Filter, Color Filter, Color Extraction Filter, or
Color Enhancer Filter
5
Use the four-way controller (23) to choose the digital filter you want to use.
6
Use the four-way controller (45) to choose the effect.
The retro filter changes in the following sequence each time you press the four-way controller (5): Original image, amber, blue.
The color filter changes in the following sequence each time you press the four-way controller (5): Red, Pink, Purple, Blue, Green, Yellow.
The color extraction filter changes in the following sequence each time you press the four-way controller (5): Red, Green, Blue.
The color enhancer filter changes in the following sequence each time you press the four-way controller (5): Sky Blue/Fresh Green/Delicate
Pink/Autumn Leaves.
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
8
Use the four-way controller (23) to select [Overwrite] or [Save as].
5
Overwrite
OK
9
Press the 4 button.
The images processed with the filter are saved.
177
5
To Select a Brightness Filter, Fish-eye Filter, or Toy Camera Filter
5
Use the four-way controller (23) to choose a digital filter you want to use.
6
Use the four-way controller (45) to adjust the effect.
For the brightness filter, the brightness increases each time you press the four-way controller (5) and decreases each time you press the four-way controller (4).
MENU OK
With the fish-eye filter or toy camera filter, pressing the four-way controller (5) strengthens the effect and (4) lessens the effect.
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
8
Use the four-way controller (23) to select [Overwrite] or [Save as].
Overwrite
OK
9
Press the 4 button.
The images processed with the filter are saved.
178
Red-eye Compensation
You can correct images where the flash has caused the subject to appear with red eyes.
• The red-eye compensation function cannot be used on panoramic images, movies or on images where red eyes cannot be detected on the camera. An error message appears in step 4.
• The red-eye compensation function can only be used with still pictures taken with this camera.
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to correct.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select Z (Red-eye
Compensation).
For compensating red-eye.
May not work due to the condition of the image
MENU OK
4
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
5
Use the four-way controller (23) to select [Overwrite] or [Save as].
5
O v e r w r i t e
OK
6
Press the 4 button.
The edited image is saved.
179
5
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are
90 frames already stored in the camera.
Panoramic or other images shot at 3:2 (4000×2672) or 16:9 (4000×2256), movies, and images with a size less than h (2048×1536) cannot have a frame added. An error message appears in step 4.
1
Enter the Q mode and use the four-way controller
(45) to choose the image to which you want to add a frame.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select N (Frame
Composite).
For composing an image with a frame. Select Overwrite or Save as to save
MENU OK
4
Press the 4 button.
The 9-frame display of the frame selection screen appears.
5
Use the four-way controller
(2345) to choose a frame. y OK
180
6
Press the y button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller
(45)
Press to choose a different frame.
Zoom button left (f) Press to return to the 9frame display of the frame selection screen, and then perform step 5 to choose a different frame.
f
OK
7
Press the 4 button.
The frame position and size adjustment screen appears.
You can adjust the image using either of the following operations.
MENU OK
Four-way controller
(2345)
Press to adjust the position of the image
Zoom button (f/y) Press to make the image larger or smaller.
8
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image and the following confirmation does not appear.
9
Use the four-way controller (23) to select [Overwrite] or [Save as].
5
Overwrite
OK
10
Press the 4 button.
The edited image is saved with the recorded pixels of h (2048×1536).
181
5
Optional Frames
The optional frames are stored in the built-in memory in the Optio W80. If the optional frames are deleted from the built-in memory using a computer, they can be recovered by copying them from the CD-ROM (S-SW87) provided.
To Copy Frames
1
Remove the SD Memory Card from the camera.
If you leave the SD Memory Card in the camera, the frames will be copied onto the card, not into the camera’s built-in memory.
2
Connect the camera to the computer using the provided USB cable (I-USB7).
Refer to “Connecting to a Computer” (p.223) for instructions on
connecting the camera to a computer.
3
When the device detection window opens, click
[Cancel].
4
Insert the CD-ROM (S-SW87) into the CD-ROM drive.
5
When the installer window opens, click [EXIT].
6
If there is not already a “FRAME” folder in the root directory of the camera (Removable Disk), create the folder.
7
Copy the desired files from the FRAME folder in the root directory of the CD-ROM to the FRAME folder on the camera (Removable Disk).
For information on working with files on your computer, refer to the instruction manual supplied with the computer.
8
Disconnect the USB cable from the computer and camera.
Refer to “Connecting to a Computer” (p.223) for instructions on
disconnecting the camera from a computer.
• Frames can be stored both in the built-in memory and on the SD Memory
Cards, but using large numbers of frames may slow down processing times.
182
.3
To Use a New Frame
The frames downloaded from the PENTAX website or other source can be used for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder in the built-in memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted with this camera.
• For more information on downloading, refer to the PENTAX website.
Editing Movies
You can select a frame from the recorded movie to save as a still picture or divide a movie into two.
1
Enter the Q mode and use the four-way controller
(45) to choose the movie you want to edit.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select [ (Movie
Edit).
For cutting out a still image from a movie or dividing a movie
MENU OK
4
Press the 4 button.
The movie edit selection screen appears.
S a v e a s S t i l l i m a g e
5
OK
183
5
To Save a Frame from a Movie as a Still Picture
5
Select [Save as Still Image] on the movie edit selection screen.
6
Press the 4 button.
The screen appears for selecting a frame to be saved as a still picture.
7
Use the four-way controller
(2345) to choose the frame you want to save.
2 Plays or pauses the movie
11
3 Stops the movie and returns to the first frame
MENU OK
4 Reverses the movie frame by frame
5 Advances the movie frame by frame
8
Press the 4 button.
The selected frame is saved as a still picture.
To Divide a Movie
5
Select [Divide Movies] on the movie edit selection screen.
6
Press the 4 button.
The screen for choosing the dividing position appears.
7
Use the four-way controller
(2345) to determine the dividing position.
2 Plays or pauses the movie
3 Stops the movie and returns to the first frame
4 Reverses the movie frame by frame
MENU
11
OK
5 Advances the movie frame by frame
8
Press the 4 button.
A confirmation dialog appears.
184
9
Use the four-way controller (2) to select [Divide].
D i v i d e
OK
10
Press the 4 button.
The movie is divided at the specified position, the two portions are saved as new files, and the original one is deleted.
The protected movies cannot be divided.
Copying Images and Sound Files
You can copy images and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when an SD Memory Card has been inserted in the camera.
5
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select p (Image/
Sound Copy).
3
Press the 4 button.
The copying method selection screen appears.
For copying images and sounds between the builtin memory and SD memory card
MENU OK
185
To Copy Files from the Built-in Memory to the SD Memory Card
All the images and sound files in the built-in memory are copied to the
SD Memory Card at once. Before copying the images, make sure that there is enough space on the SD Memory Card.
4
Use the four-way controller (2) to
select [2}{].
SD
OK
5
Press the 4 button.
All the images and sound files are copied.
5 To Copy Files from the SD Memory Card to the Built-in Memory
Selected images and sound files from the SD Memory Card are copied to the built-in memory one at a time.
4
Use the four-way controller (23) to select [{}2].
5
Press the 4 button.
6
Use the four-way controller (45) to select the image/sound file you want to copy.
186
MENU OK
7
Press the 4 button.
The selected image/sound file is copied.
• If sound (Voice Memo) has been recorded with the image, the sound file is copied with the image.
• When a file is copied from the SD Memory Card to the built-in memory, it is assigned a new file name.
