Pentax K-5 Operating Manual
Annonce
Annonce
HOYA CORPORATION
PENTAX Imaging Systems Division
PENTAX Europe Imaging
Systems S.A.S.
(European Headquarters)
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(HQ - http://www.pentaxeurope.com)
(France - http://www.pentax.fr)
PENTAX Imaging Systems
GmbH
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(http://www.pentax.de)
PENTAX Imaging Systems
Limited
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401,
U.S.A.
(PENTAX Service Department)
250 North 54th Street Chandler, Arizona 85226, U.S.A.
(http://www.pentaximaging.com)
PENTAX Canada Inc.
PENTAX Trading
(SHANGHAI) Limited
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn) http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
58192 Copyright © HOYA CORPORATION 2010
H01-201009 Printed in Philippines
SLR Digital Camera
Operating Manual
For optimum camera performance, please read the
Operating Manual before using the camera.
Thank you for purchasing this PENTAX X Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions.
Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
Lenses you can use
In general, lenses that can be used with this camera are DA, DA L, D FA and FA J lenses and lenses that have an s (Auto) position on the aperture ring. To use any other
lens or accessory, see p.59 and p.337.
Regarding copyrights
Images taken using the X that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright
Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
PENTAX, X and smc PENTAX are trademarks of HOYA CORPORATION.
PENTAX Digital Camera Utility and SDM are trademarks of HOYA CORPORATION.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the
United States and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
SDHC Logo is a trademark of SD-3C, LLC.
This product includes DNG technology under license by Adobe Systems Incorporated.
The DNG logo is either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
All other brands or product names are trademarks or registered trademarks of their respective companies. However, the TM or ® marks are not used in all cases in this manual.
This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not
PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation.
The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the product’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used in the monitor is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
• There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual ones.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a
Macintosh hereafter.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its accessories.
1
For Using Your Camera Safely
We have paid close attention to the safety of this product. When using this product, we request your special attention regarding items marked with the following symbols.
Warning
Caution
This symbol indicates that violating this item could cause serious personal injuries.
This symbol indicates that violating this item could cause minor or medium personal injuries, or loss of property.
About the Camera
Warning
• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.
• Wrapping the strap around your neck is dangerous. Take care that small children do not hang the strap around their necks.
• Do not look directly at the sun through the camera with a telephoto lens attached, as viewing the sun may damage your eyes. Viewing the sun directly with a telephoto lens may lead to a loss of eyesight.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest PENTAX Service Center. Continuing to use the product can cause a fire or electric shock.
• Do not place your finger over the flash when discharging the flash. You may burn yourself.
• Do not cover the flash with clothing when discharging the flash. Discoloration may occur.
2
• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.
• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About the Battery Charger and AC Adapter
Warning
• Always use the battery charger and AC adapter exclusively developed for this product, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this product, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 - 240V AC.
• Do not disassemble or modify the product. This can cause a fire or electrical shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult a PENTAX Service Center.
Continuing to use the product can cause a fire or electric shock.
• If water should happen to get inside the product, consult a PENTAX Service
Center. Continuing to use the product can cause a fire or electric shock.
• If thunderstorm should be present during use of the battery charger and AC plug cord, unplug the power plug and discontinue use. Continuing to use the product can cause damage to the equipment, fire or electrical shock.
• Wipe off the power plug if it should become covered with dust. Accumulated dust may cause a fire.
• To reduce the risk of hazards, use only CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
Caution
• Do not place or drop heavy objects on or forcefully bend the AC plug cord.
Doing so may damage the cord. Should the AC plug cord be damaged, consult a PENTAX Service Center.
• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.
• Do not handle the power plug with wet hands. This can cause an electric shock.
• Do not drop the product, or subject it to violent impact. This can cause equipment breakdown.
• Do not use the battery charger to charge batteries other than the rechargeable lithium-ion battery D-LI90. Attempting to charge other types of batteries may cause an explosion or heating, or may damage the battery charger.
3
About the Battery
Warning
• If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.
Caution
• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.
• If any leakage from the battery should come in contact with skin or clothes, it may cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI90 Battery Usage:
USE SPECIFIED CHARGER ONLY.
- DO NOT INCINERATE.
- DO NOT DISASSEMBLE.
- DO NOT SHORT CIRCUIT.
- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)
Keep the Camera and its Accessories out of the Reach of Small Children
Warning
• Do not place the camera and its accessories within the reach of small children.
1. If the product falls or is operated accidentally it may cause serious personal injuries.
2. Wrapping the strap around a neck may cause suffocation.
4
3. To avoid the risk of a small accessory such as the battery or SD Memory
Cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an accessory is accidentally swallowed.
Care to be Taken During Handling
Before Using Your Camera
• When traveling, take the Worldwide Service Network listing that is included in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD
Memory Card), etc.
About the Battery and Charger
• Storing the battery fully charged may decrease the battery performance.
Avoid storing in high temperatures.
• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s usage life.
• Charging the battery a day before use or on the day of use is recommended.
• The AC plug cord provided with this camera is developed exclusively for the battery charger D-BC90. Do not use it with other devices.
Precautions on Carrying and Using Your Camera
• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.
• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.
• The temperature range for camera use is -10°C to 40°C (14°F to 104°F).
• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.
• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.
• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove the camera after temperature of the camera and surroundings are equalized.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.
These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Please do not press forcefully on the monitor. This could cause it to break or malfunction.
• Be careful not to overtighten the screw in the tripod socket when using a tripod.
5
Cleaning Your Camera
• Do not clean the product with organic solvents such as thinner, alcohol, or benzine.
• Use a lens brush to remove dust accumulated on the lens or viewfinder.
Never use a spray blower for cleaning as it may damage the lens.
• Please contact a PENTAX Service Center for professional cleaning of the
CMOS sensor. (This will involve a fee.)
Storing Your Camera
• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera.
Remove the camera from its case and store it in a dry and well-ventilated place.
Other Precautions
• Periodic inspections are recommended every one to two years to maintain high performance.
• Refer to “Precautions When Using the SD Memory Card” (p.56) regarding the
SD Memory Card.
• Please note that deleting data stored on an SD Memory Card, or formatting an SD Memory Card does not completely erase the original data. Deleted files can sometimes be recovered using commercially available software. It is the user’s responsibility to ensure the privacy of such data.
Regarding Product Registration
In order to better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or on the PENTAX website.
Refer to p.325 for details. Thank you for your cooperation.
6
Contents
For Using Your Camera Safely.............................................................1
Care to be Taken During Handling .......................................................4
Composition of the Operating Manual ................................................13
Before Using Your Camera 15
X Characteristics ................................................................. 16
Checking the Contents of the Package...................................... 18
Names and Functions of Working Parts .................................... 19
Capture Mode .....................................................................................20
Playback Mode ...................................................................................22
Display Indicators ........................................................................ 24
How to Change Function Settings.............................................. 39
Using the Direct Keys .........................................................................39
Using the Control Panel......................................................................40
Using the Menus.................................................................................42
Using the Mode Dial..................................................................... 45
Getting Started 47
Attaching the Strap ...................................................................... 48
Inserting the Battery .................................................................... 49
Charging the Battery...........................................................................49
Inserting/Removing the Battery ..........................................................50
Battery Level Indicator ........................................................................52
Approximate Image Storage Capacity and Playback Time
(Battery Fully Charged).......................................................................52
Using the AC Adapter (Optional) ........................................................53
Inserting/Removing an SD Memory Card .................................. 55
Recorded Pixels and Quality Level.....................................................57
Attaching a Lens .......................................................................... 59
Adjusting the Viewfinder Diopter ............................................... 61
Turning the Camera On and Off.................................................. 62
Initial Settings .............................................................................. 63
Setting the Display Language.............................................................63
Setting the Date and Time ..................................................................67
Basic Operations 69
7
Basic Shooting Operation ........................................................... 70
Holding the Camera............................................................................70
Letting the Camera Choose the Optimal Settings ..............................71
Using a Zoom Lens...................................................................... 76
Using the Built-in Flash ............................................................... 77
Setting the Flash Mode.......................................................................77
Compensating for Flash Output..........................................................82
Playing Back Pictures ................................................................. 83
Playing Back Images ..........................................................................83
Deleting a Single Image......................................................................84
Shooting Functions 87
How to Operate the Shooting Functions ................................... 88
Direct Keys Setting Items ...................................................................88
Rec. Mode Menu Setting Items ..........................................................89
Custom Setting Menu Setting Items ...................................................91
Setting the Exposure ................................................................... 93
Effect of Aperture and Shutter Speed.................................................93
Setting the Sensitivity .........................................................................95
Reducing Image Noise (Noise Reduction)..........................................98
Changing the Exposure Mode ..........................................................100
Selecting the Metering Method .........................................................117
Adjusting Exposure...........................................................................119
Locking the Exposure Before Shooting (AE Lock)............................121
Focusing ..................................................................................... 122
Using the Autofocus..........................................................................122
AF Fine Adjustment ..........................................................................126
Selecting the Focusing Area (AF Point)............................................127
Locking the Focus (Focus Lock).......................................................130
Adjusting the Focus Manually (Manual Focus).................................132
Checking the Composition, Exposure and Focus Before
Shooting (Preview) .................................................................... 135
Selecting the Preview Method ..........................................................135
Displaying the Optical Preview .........................................................137
Displaying the Digital Preview ..........................................................138
8
Using the Shake Reduction Function to Prevent Camera
Shake .......................................................................................... 139
Using the Shake Reduction Function ...............................................139
Shooting with Self-timer....................................................................143
Shooting with Remote Control (Optional) .........................................145
Shooting with the Mirror Lock-up Function .......................................149
Taking Pictures Continuously .................................................. 151
Continuous Shooting ........................................................................151
Interval Shooting...............................................................................152
Multi-exposure ..................................................................................155
Shooting while Adjusting the Settings (Auto Bracketing) ..... 157
Shooting while the Exposure is Automatically Changed (Exposure
Shooting while Adjusting Other Settings
(Extended Bracketing) ......................................................................160
Taking Pictures Using Digital Filters........................................ 162
Shooting with Live View ............................................................ 165
Setting Live View ..............................................................................166
Taking a Still Picture .........................................................................168
Recording Movies ...................................................................... 171
Changing the Movie Settings............................................................171
Connecting a Microphone.................................................................173
Recording Movies .............................................................................174
Playing Back Movies.........................................................................177
Editing Movies ..................................................................................179
Using the Flash 181
Flash Characteristics in Each Exposure Mode ....................... 182
Using the Slow-speed Sync..............................................................182
Using the Trailing Curtain Sync ........................................................184
Distance and Aperture when Using the Built-in Flash ........... 185
Lens Compatibility with the Built-in Flash............................... 186
Using an External Flash (Optional) .......................................... 187
Using P-TTL Auto Mode ...................................................................188
Using High-Speed Flash Sync Mode................................................189
Using Flash in Wireless Mode ..........................................................190
Connecting an External Flash with an Extension Cord.....................194
Multiple Flash Shooting Using Extension Cords...............................195
Contrast-Control-Sync Flash ............................................................196
X-sync Socket...................................................................................197
Shooting Settings 199
Setting a File Format ................................................................. 200
Setting the JPEG Recorded Pixels ...................................................200
Setting the JPEG Quality Level ........................................................201
Setting a File Format ........................................................................202
Setting the White Balance ......................................................... 205
Fine-tuning the White Balance..........................................................207
Adjusting the White Balance Manually .............................................208
Adjusting the White Balance with Color Temperature ......................210
Setting the Color Space....................................................................212
Saving the White Balance Setting of a Captured Image...................213
Correcting Images ..................................................................... 214
Adjusting Brightness .........................................................................214
Lens Correction ................................................................................218
Adjusting the Composition ................................................................220
Setting the Image Finishing Tone............................................. 222
Setting Custom Image ......................................................................222
Setting Cross Processing .................................................................225
Storing Frequently Used Settings ............................................ 227
Saving the Settings...........................................................................227
Checking the Saved USER Settings.................................................229
Using Saved USER Settings ............................................................230
Changing the Settings ......................................................................231
Resetting to Default Settings ............................................................232
Playback Functions 233
Playback Functions Operation ................................................. 234
Playback Mode Palette Setting Items ...............................................234
Playback Menu Setting Items ...........................................................235
Setting the Playback Display Method ...................................... 236
Enlarging Images ....................................................................... 237
Displaying Multiple Images....................................................... 238
Multi-image Display Screen ..............................................................238
Displaying Images by Folder ............................................................239
Displaying Images by the Shooting Date (Calendar Display) ...........240
Comparing Images ...........................................................................241
Joining Multiple Images (Index) ........................................................243
Playing Back Images Continuously ......................................... 246
Setting the Slideshow Display ..........................................................246
Starting the Slideshow ......................................................................247
9
10
Rotating Images ......................................................................... 249
Deleting Multiple Images ........................................................... 250
Deleting Selected Images.................................................................250
Deleting a Folder ..............................................................................252
Deleting All Images...........................................................................253
Protecting Images from Deletion (Protect) .............................. 254
Protecting a Single Image.................................................................254
Protecting All Images........................................................................255
Connecting the Camera to an AV Device................................. 256
Connecting the Camera to a Video Input Terminal...........................256
Connecting the Camera to an HDMI Terminal..................................258
Processing Images 261
Changing the Image Size .......................................................... 262
Changing the Number of Recorded Pixels and Quality Level
Cutting Out Part of the Image (Cropping) .........................................263
Processing Images with Digital Filters .................................... 265
Applying the Digital Filter ..................................................................267
Recreating Filter Effects ...................................................................268
Searching for the Original Image ......................................................270
Developing RAW Images........................................................... 271
Developing One RAW Image............................................................271
Developing Multiple RAW Images ....................................................272
Specifying the Parameters................................................................274
Changing Additional Settings 277
How to Operate the Set-up Menu.............................................. 278
Set-up Menu Setting Items ...............................................................278
Formatting the SD Memory Card .............................................. 281
Customizing Buttons and Dials ................................................ 282
Setting the Function for the E-dials...................................................282
Setting the Function for the Buttons .................................................285
Setting the Beep, Date and Time, and Display Language ...... 288
Setting the Beep ...............................................................................288
Changing the Date and Time Display ...............................................289
Setting the World Time .....................................................................289
Setting the Display Language...........................................................292
Adjusting the Monitor and the Menu Display .......................... 293
Setting the Text Size.........................................................................293
Setting the Guide Display Time ........................................................293
Setting the Initial Menu Tab Displayed .............................................294
Setting the Status Screen Display ....................................................295
Setting the Display for Instant Review ..............................................296
Adjusting the Brightness of the Monitor ............................................297
Adjusting the Color of the Monitor ....................................................298
Setting the Electronic Level Display .................................................299
Setting the Folder/File Number................................................. 300
Changing the Naming System of the Folder.....................................300
Creating New Folders .......................................................................300
Selecting the File Number Setting ....................................................301
Setting the File Name .......................................................................302
Selecting the Power Settings.................................................... 304
Setting the Auto Power Off Function ................................................304
Selecting a Battery............................................................................305
Setting the Photographer Information ..................................... 307
Setting the DPOF Settings ........................................................ 309
Correcting Defective Pixels in the CMOS Sensor
(Pixel Mapping) .......................................................................... 311
Selecting Settings to Save in the Camera (Memory) .............. 312
Connecting to a Computer 315
11
Manipulating Captured Images on a Computer ...................... 316
Saving Images on Your Computer ........................................... 317
Setting the USB Connection Mode ...................................................317
Saving Images by Connecting Your Camera and Your Computer ...318
Using the Provided Software .................................................... 320
Installing the Software ......................................................................320
Screens of the PENTAX Digital Camera Utility 4..............................322
Appendix 327
Default Settings.......................................................................... 328
Resetting the Menus .................................................................. 335
Resetting the Rec. Mode/Playback/Set-up Menus ...........................335
Resetting the Custom Menu .............................................................336
Functions Available with Various Lens Combinations .......... 337
Notes on [27. Using Aperture Ring] ..................................................339
Cleaning the CMOS Sensor....................................................... 340
Removing Dust with Ultrasonic Vibrations (Dust Removal)..............340
12
Detecting Dust on the CMOS Sensor
Removing Dust with a Blower...........................................................343
Optional Accessories ................................................................ 345
Error Messages .......................................................................... 351
Troubleshooting......................................................................... 354
Main Specifications ................................................................... 356
Glossary...................................................................................... 362
WARRANTY POLICY.................................................................. 373
13
Composition of the Operating Manual
This Operating Manual contains the following chapters.
Explains camera characteristics, accessories and the names and functions of various parts.
Explains your first steps from purchasing the camera to taking pictures. Be sure to read this chapter and follow the instructions.
Explains the procedures for taking and playing back pictures.
Explains the shooting-related functions.
Explains how to use the built-in flash and external flashes.
Explains the procedures for configuring image processing and setting the file format.
Explains the procedures for playing back, deleting, and protecting pictures.
Explains the procedures for changing the image size, applying digital filters and developing images taken in RAW format.
9 Changing Additional Settings
Explains the procedures for changing the camera settings, such as the monitor display settings and the image file naming convention.
Explains how to connect the camera to a computer, and includes installation instructions and a general overview of the provided software.
Explains troubleshooting, introduces optional accessories and provides various resources.
1
2
3
4
5
6
7
8
9
10
11
14
The symbols used in this Operating Manual are explained below.
1 Indicates reference page number explaining a related operation.
Indicates useful information.
Indicates precautions to take when operating the camera.
1
Before Using Your
Camera
Check the package contents and the names and functions of working parts before use.
X
Characteristics ..........................................16
Checking the Contents of the Package ..............18
Names and Functions of Working Parts ............19
Display Indicators ................................................24
How to Change Function Settings ......................39
Using the Mode Dial .............................................45
16 X
Characteristics
1
• Features a 23.7×15.7 mm CMOS sensor with approximately 16.28 million effective pixels for high precision and a wide dynamic range.
• Features Shake Reduction (SR), an image sensor shifting shake reduction system. This enables you to capture sharp pictures with minimal camera shake regardless of the lens type.
• Features an AF sensor with 11 focusing points. The central 9 focusing points are wide cross area sensors.
• Features a viewfinder similar to that of a conventional 35 mm camera, with a magnification of approximately 0.92 and field of view of approximately
100%, for easier manual focusing. Also features a superimpose function in which the active AF point(s) on the viewfinder illuminate red.
• Features a large 3.0-inch monitor with approximately 921,000 dots, a wide viewing angle and brightness and color adjusting functions for high-precision viewing performance.
• Features a Live View function for shooting while viewing the subject in real-time on the monitor.
• Movies can be recorded by taking advantage of the lens properties. The camera can also output composite and HDMI video signals so that you can watch recorded images and movies on a TV or high-quality monitor.
• A user-friendly design has been implemented in various parts of the camera. The large text size, high-contrast monitor and easy-to-use menus make the camera easier to operate.
• The body exterior is magnesium alloy, and the dials, buttons, joints, and retractable parts of the camera are dust-proof and water-resistant.
• Features Dust Removal function to shake the CMOS sensor and remove the collected dust.
• Features Hyper-program and Hyper-manual modes that let you take pictures with the intended exposure. Also features Sensitivity Priority mode
K that automatically adjusts aperture and shutter speed according to the set sensitivity, and Shutter & Aperture Priority mode L that automatically adjusts sensitivity according to the set aperture and shutter speed.
• Features Digital Filters to internally process the image in the camera.
You can use digital filters such as Color or Soft while taking pictures or to process images after taking them.
• Features Custom Image which allows you to adjust settings while previewing the end result of the edited image, enabling a wider range of photographic expression.
• Records images in the versatile JPEG format or the high quality and fully editable RAW format. You can also select JPEG+RAW and record in both formats simultaneously. When the file format of the last captured image is JPEG, and its data still remains in the buffer memory, you can additionally save the image in RAW format. RAW images can be easily processed internally by the camera.
• Up to five setting patterns can be saved in A mode. In addition, functions for the |/Y button and the e-dials can also be customized, enabling speedy operation by any type of photographer.
• Supports the optional Battery Grip D-BG4 with vertical shutter release button. If a battery (D-LI90) is inserted in both the camera and grip, the battery with more power is prioritized. This enables you to get the best camera performance for an extended period. A menu item also allows you to prioritize a battery and use its full power before switching to the other battery.
17
1
Shake Reduction (SR)
Shake Reduction (SR) on the X features a PENTAX original system which uses magnetic force to move the image sensor at high speeds, compensating for camera shake.
The camera may generate some operating noise when it is shaken, such as when changing the composition of a picture. This is normal and not a malfunction.
The captured area (view angle) will differ between the X and 35 mm SLR cameras even if the same lens is used because the format sizes for 35 mm film and CMOS sensor are different.
Sizes for 35 mm film and CMOS sensor
35 mm film : 36×24 mm
X CMOS sensor : 23.7×15.7 mm
The focal length of a lens used with a 35 mm camera is about 1.5 times longer than that of the X. To shoot images with an angle of view framing the same area, divide the focal length of the 35 mm lens by 1.5.
Example) To capture the same image as a 150 mm lens attached to a 35 mm camera
150÷1.5=100
Use a 100 mm lens with the X.
Inversely, multiply the focal length of the lens used with the X by 1.5 to determine the focal length for 35 mm cameras.
Example) If 300 mm lens is used with the X
300×1.5=450
Focal length is equivalent to a 450 mm lens on a 35 mm camera.
18
Checking the Contents of the
Package
1
The following accessories are packaged with your camera.
Check that all accessories are included.
Hot shoe cover F
K
(Installed on camera)
Eyecup F
R
(Installed on camera)
ME viewfinder cap
Sync socket 2P cap
(Installed on camera)
Body mount cover
(Installed on camera)
Triangular ring and protective cover
(Installed on camera)
USB cable
I-USB7
AV cable
I-AVC7
Strap
O-ST53
Rechargeable lithium-ion battery D-LI90
Battery charger
D-BC90
AC plug cord
Software (CD-ROM)
S-SW110
Operating Manual
(this manual)
Names and Functions of Working
Parts
Built-in flash
Strap lug
AF assist light
Card cover
Self-timer lamp
/Remote control receiver
Lens mount index
Lens unlock button
19
Hot shoe
Strap lug
X-sync socket
Mirror
AF coupler
Lens information contacts
Diopter adjustment lever
LCD Panel
Image plane indicator
1
Speaker
Microphone
Viewfinder
Microphone terminal mini HDMI terminal
(Type C)
PC/AV terminal
DC input terminal
Terminal cover
Monitor
Self-timer lamp/
Remote control receiver
Cable release terminal
Card access lamp
Tripod socket
Battery grip contacts
Battery cover unlock knob
Battery cover
* In the first illustration, the camera is shown with the Hot shoe cover F
K removed.
* In the second illustration, the camera is shown with the Hot shoe cover F
K
and the Eyecup F
R
removed.
20
Capture Mode
1
Functions of buttons, dials and levers used during shooting are noted.
1
2
3
4
5
7
8
9
0 a
6 c d b h i j k l m e f g
1 m button
Turn the rear e-dial (S) while pressing this button to set the EV compensation
2 o button
Turn the rear e-dial (S) while pressing this button to
set the ISO sensitivity. (p.95)
3 Shutter release button
Press to capture images.
4 Main switch
Move to turn the power on/off
5 Front e-dial (R)
Changes the settings.
6 Lens unlock button
Press to detach a lens. (p.60)
7 E button
Press to pop up the built-in
8 Mode dial lock button
Press to allow the mode dial to
9 Mode dial
Switches the exposure
0 Metering mode switching lever
Changes the metering
a |/Y button
You can assign a function to
b Focus mode lever
Switches between autofocus
and manual focus mode
c Q button
Switches to Playback mode.
d M button
Turns the status screen display on the monitor on/off.
Switches to the control panel when the status screen is
21 e Rear e-dial (S)
Changes the settings.
f L button
Records the exposure before
preview image.
g | (Green) button
Sets the exposure mode to
Automatic Exposure and resets the settings.
h AF point switching dial
Sets the focusing area.
i = button
Sets the focusing area and temporarily provides manual
j U button
Displays a Live View image.
k 4 button
When the control panel or a menu screen is displayed, press this button to confirm the selected item.
When the AF point switching dial is set to j (Select), press this button to enable or disable changing the AF point.
1
22
1 l Four-way controller
(2345)
Displays the Drive Mode/Flash
Mode/White Balance/Custom
When the control panel or a menu screen is displayed, use this to move the cursor or change items.
When the AF point switching dial is set to j (Select), use this
m 3 button
Displays the [A Rec. Mode 1]
four-way controller (5) to display other menus.
Playback Mode
Functions of buttons, dials and lever used during playback are noted.
1
2
3
4
5
6
7
8
9
0 a b c
23
1 m button
Press in the enlarged view to increase the magnification.
2 Shutter release button
Press halfway to switch to
Capture mode.
3 Main switch
Move to turn the camera on
position to switch to Capture mode and preview.
4 Front e-dial (R)
Use this to display the next or previous image.
5 i button
Press to delete images. (p.84)
6 Q button
Press to switch to Capture mode.
7 M button
Press to display the shooting information on the monitor.
8 Rear e-dial (S)
Use this to change the magnification in the enlarged
multiple images at the same
References to Button Names
In this Operating Manual, the buttons of the fourway controller are referred to in the following way.
9 L button
When the file format of the last captured image is JPEG, and its data still remains in the buffer memory, press this button to additionally save the
0 | (Green) button
Press in the enlarged view to decrease the magnification.
a 4 button
Confirms the setting you selected in the menu screen or playback screen.
b Four-way controller
(2345)
When a menu screen or playback screen is displayed, use this to move the cursor or change items.
Press the four-way controller
(3) to display the playback
c 3 button
Press to display the
[Q Playback 1] menu
(p.235). Next, press the four-
way controller (5) to display other menus.
1
24
Display Indicators
1
Monitor
The various information appears on the monitor depending on the status of the camera.
Monitor
The brightness and the color of the monitor can be adjusted. (p.297, p.298)
At Start-up or when Operating the Mode Dial
Guides appear on the monitor for 3 seconds (default setting) when the camera is switched on or the mode dial is turned.
1
P Program
Automatic Exposure
2
RAW
AF
RAW
Cancel AF
09/09/2010
P
10:30AM
Tv
Av
3 4
1
2 Guide indicator
3
4
* 3 appears only when [World Time] is set to [Destination].
• Select [Off] for [Guide Display] in the [R Set-up 1] menu to not show guides.
• When the mode dial is set to A, the screen for selecting the USER mode is displayed for 30 seconds regardless of the [Guide Display] setting.
25
Capture Mode
While shooting, the status screen is displayed showing the current shooting function settings. You can change the type of the screen displayed by pressing the M button.
P
1/ 2000
ISO
AUTO
1600
AF.S
F 2.8
±0.0
±0±0
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[
Status screen
37 ]
M
M
ISO AUTO Setting
Adjustment Range
ISO
AUTO
200-1600
HDR
OFF
JPEG 16
M
[
Control panel
37 ]
M
M
1
Blank Electronic level display
[Electronic Level] is P (Off) by default. Set in the [A Rec. Mode 4] menu.
26
Status screen
(All items are displayed here for explanatory purposes. The actual display may differ.)
1
P USER
SHIFT
1/ 2000
ISO
AUTO
1600
AF.S
F 2.8
+1.0
G1A1
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 1234 ]
1 2 3 4
9
8
8
13
8
11
14
12
15 16 17
19 20 21
8
18
5 6 7
10
22
23
24
25
1
2
3
Interval Shooting (p.152)/Multi-
Bracketing (p.160)/Digital Filter
4
5
6
7
8 E-dial guide
9 Shutter speed
10 Aperture value
11 ISO/ISO AUTO
14 EV bar
20 JPEG Recorded Pixels (p.200)
22 Flash Exposure Compensation
23 White Balance fine-tuning (p.207)/
25 Remaining image storage capacity/| button guide
Control panel
Press the M button in the status screen to display the control panel and change settings.
27
ISO AUTO Setting
Adjustment Range
ISO
AUTO
200-1600
JPEG 16
M
[
HDR
OFF
37 ]
4
8
12
2
5
9
13
16
1
6
10
14
3
7
11
15
17
1 Function name
2
3
4
5
6
7 Lateral Chromatic Aberration
8
9
13 JPEG Recorded Pixels (p.200)
15 Shake Reduction/
16 Current date and time
17 Remaining image storage capacity
• Settings that cannot be changed due to the current camera setup cannot be selected.
• When [Status Screen] (p.295) in the [R Set-up 1] menu is set to P (Off), the
status screen is not displayed. The control panel turns on and off each time the M button is pressed.
• On the status screen, the setting currently being changed or guide display for the buttons that can be operated are displayed in blue (when [Status Screen]
(p.295) in the [R Set-up 1] menu is set to [Display Color 1]).
• The status screen will disappear if no operations are made within 30 seconds. Press the M button to display it again.
• If no operations are made within 30 seconds in the control panel, the status screen will reappear.
• [9999] is the maximum number of recordable images that can be displayed on the status screen and in the control panel. Even if the number of recordable images is 10,000 or more, [9999] is displayed.
1
28
1
Electronic level display
This camera is equipped with an electronic level for detecting whether the camera is level. When [Electronic Level] is set to O (On), press the M button while the control panel is displayed to view the electronic level. When [Electronic Level] is assigned to the |/Y button, press the |/Y button to switch the display on/off.
A bar graph indicating the horizontal camera angle appears at the bottom of the screen, and a bar graph indicating the vertical camera angle appears on the right side.
Example:
Horizontally and vertically level (green)
Tilted 1.5° to the left (yellow)
Vertically level (green)
Outside horizontal level display (red)
Tilted 5° up (yellow)
Horizontally level (green)
Outside vertical level display (red)
• [Electronic Level] is P (Off) by default. Set in the [A Rec. Mode 4]
• Refer to p.285 for assigning a function to the |/Y button.
• The electronic level display will disappear if no operations are made within 1 minute.
• If the camera angle cannot be detected, both ends and the center of the bar graphs flash red.
29
When holding the camera vertically
If the camera is held vertically while measuring the brightness, the status screen or control panel is displayed vertically. The directions of the four-way controller (2345) also change to match the orientation of the camera.
To always display the contents of the screen horizontally, set in [Status Screen] of the [R
ISO AUTO Setting
Adjustment Range
ISO
AUTO
200-1600
JPEG 16
M
HDR
OFF
[ 1234 ]
1
Playback Mode
The camera switches the types of information display when you press the
M button during playback.
Standard
Histogram display
Detailed information display
No info. display
Captured image, file format, and guides are displayed.
Captured image and histogram (Brightness/RGB) are
displayed. Not available during movie playback. (p.32)
Detailed information on how and when the image was taken
Only captured image is displayed.
AE-L M AE-L
JPEG 1/ 2000 F5.6
ISO 200
Standard
M
No info. display
1/ 2000 F5.6
ISO 200
Histogram display
M
M
P 100-0001
AF.A
1/ 2000
F2.8
ISO 200
24mm
+1.5
-0.5
G2 A1
JPEG 16
M AdobeRGB
09/09/2010 10:00AM
± 0
± 0
± 0
± 0
± 0
Detailed information display
30
1
The type of information display that is shown first during playback is the same as that of the last playback in the previous session. If [Playback Info Display] is
set to P (Off) in [Memory] (p.312) of the [A Rec. Mode 5] menu, the [Standard]
screen is always displayed first when the camera is turned on.
Detailed information display
Use the four-way controller (23) to switch between pages.
Page 1
Still Picture
P 100-0001
AF.A
1/ 2000
F2.8
ISO 200
24mm
+1.5
-0.5
G2 A1
JPEG 16
M AdobeRGB
09/09/2010 10:00AM
± 0
± 0
± 0
± 0
± 0
1
2
11 12
3
7
9
13 14 15 16
8
20
23
21
24
4
17
26 27 28
32
5
10
18
22
25
19
29
33
6
30
31
Movie
MONO
F2.8
100-0001
10min10sec
G2 A1
Movie FullHD
25
09/09/2010 10:00AM
± 0
± 0
± 0
± 0
± 0
3 5
2
34
35 36
20 37
26 27 28
32
24
14 38
25
4
6
30
31
Page 2
Still Picture/Movie
2
3
100-0001
1
2
2
3
5 6
39
39
40
41
31
1
2 Captured image
3
4 Shake Reduction/
5
6 Folder number-File number
7
8
9 Focal Length
13 Shutter speed
15 Extended Bracketing (p.160)/
16 Highlight Correction (p.214)
18 Distortion Correction (p.218)
19 Lateral Chromatic Aberration
20 Aperture value
22 Flash Exposure Compensation
25 White Balance fine-tuning (p.207)
27 Recorded Pixels (p.171, p.200)
28 Quality Level (p.171, p.201)
30 Image finishing tone (p.222)
31 Custom Image parameters
32 Shooting date and time
34 Recording time
36 Sound type
37 Drive Mode (Remote Control)
39 Information tampering warning
* For images taken during Live View using Face Detection AF or Contrast AF, the autofocus method is displayed for indicator 10.
* Indicators 8 and 22 appear only for images taken with the flash.
* Indicators 14, 15, 16, 17, 18, 19, 33, and 38 appear only for images taken with the corresponding functions enabled.
* Indicators 27 and 28 do not appear for RAW images.
* Indicator 39 appears only for images whose information was tampered.
1
32
1
Histogram display
The following histograms can be displayed when playing back still pictures. The “Brightness histogram” shows the distribution of brightness and the “RGB histogram” shows the distribution of color intensity. Press the four-way controller (23) to switch between “Brightness histogram” and “RGB histogram”.
1 2 3 4 2 3
5
AE-L
4 23
23
5
1
1/ 2000 F5.6
ISO 200
6 7 8 9
Brightness histogram
1 0
1 Histogram (Brightness)
2 Protect
3 Folder number-File number
4 Additionally saving in RAW format
5 Switch RGB histogram/
Brightness histogram
6 File Format
7
8
9
Shutter speed
Aperture value
Sensitivity
10 DPOF settings
11 Histogram (R)
12 Histogram (G)
13 Histogram (B)
* Indicator 2 appears only for protected images.
* Indicator 4 appears only when the file format of the last captured image is
JPEG, and its data still remains in the buffer memory. (p.84)
11
1 2
AE-L
1/ 2000 F5.6
ISO 200
6 7 8 9 1 0
RGB histogram
13
If [Bright/Dark Area] (p.236) in the [Q Playback 1] menu is set to O (On),
areas affected by bright or dark portions blink (except when in RGB histogram display and Detailed information display).
33
Using the Histogram
A histogram shows the brightness distribution of an image. The horizontal axis represents brightness
(dark at the left and bright at the right) and the vertical axis represents the number of pixels.
The shape and the distribution of the histogram before and after shooting
(Dark) ←Brightness→ (Bright) tells you whether the exposure level and contrast are correct or not, and
Dark portions Bright portions lets you decide if you need to adjust the exposure and take a picture again.
1
1
Understanding Brightness
When the brightness is correct and there are no overly bright or dark areas, the graph peaks in the middle. If the image is too dark, the peak is on the left side, and if it is too bright, the peak is on the right side.
1
Dark image Image with few bright or dark areas
Bright image
When the image is too dark, the part to the left is cut off (dark portions with no detail) and when the image is too bright, the part to the right is cut off
(bright portions with no detail).
Bright portions blink red and dark portions blink yellow on the monitor when [Bright/Dark Area] is O (On).
1
1
Setting the Playback Display Method (p.236)
1
Setting the Display for Instant Review (p.296)
Understanding Color Balance
Distribution of color intensity is displayed for each color in the RGB histogram. The right side of the graphs look similar for images that have
White Balance adjusted well. If only one color is lopsided to the left, that color is too intense.
1
Setting the White Balance (p.205)
34
1
Guide Indicators
The following indicators appear on the monitor to indicate the keys, buttons and e-dials that can be operated at that time.
Example:
2
3
4
5
R
S
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
Front e-dial
Rear e-dial
3 button
|
4 button
Green button
L button i button
Shutter release button
|/Y button
35
Viewfinder
The following information appears in the viewfinder.
2 3
1 1
4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19
1
2
3
4
Lit: when the flash is available.
Blinks: when the flash is recommended but not set or is being charged.
5
Appears when the focus mode is set to \.
6 Shutter speed
Underlined when the shutter speed can be adjusted.
Displays a countdown of processing time when the Noise Reduction
7 Aperture value
Underlined when the aperture value can be adjusted.
[nr] blinks when the Noise Reduction function is activated. (p.98)
8
Lit: when the subject is focused.
Blinks: when the subject is not in focus.
9 EV bar
Displays the EV compensation values or difference between the appropriate and current exposure values when the exposure mode is set to a
Displays the camera angle when [Electronic Level] is O (On). (p.38)
1
36
1
10 ISO/ISO AUTO
Appears when the sensitivity is displayed.
11 Sensitivity/Remaining image storage capacity
Underlined when the sensitivity can be adjusted.
Displays the number of recordable images immediately after shooting.
Displays the compensation value while adjusting the EV compensation.
Displays the amount of deviation from the correct exposure when the exposure mode is set to a or M and [Electronic Level] is set to O (On).
Appears while the AE Lock function is activated.
Appears when the AF point can be changed with the AF point switching dial set to j (Select).
Appears when Multi-exposure is set.
Appears when the metering method is M (Center-weighted metering) or
N (Spot metering).
Appears when the Shake Reduction function is activated.
17 Flash Exposure Compensation (p.82)
Appears when the flash exposure compensation is in use.
18 EV Compensation (p.119)/Exposure Bracketing (p.157)
Appears when adjusting the EV compensation or when the drive mode is set to [Exposure Bracketing].
Displays the image save format in RAW/RAW+ format.
Not displayed in JPEG format.
• The AF point(s) in use for autofocus appear in red (Superimpose AF Area)
when the shutter release button is pressed halfway. (p.127)
• When [Cancel AF] is assigned to [AF Button] in [Button Customization] of the
[A Rec. Mode 5] menu, \ is displayed in the viewfinder while the =
• [9999] is the maximum number of recordable images that can be displayed in the viewfinder. Even if the number of recordable images is 10,000 or more,
[9999] is displayed.
37
LCD Panel
The following information appears in the LCD panel on top of the camera.
3 4 5
1
2
6
7
8
9
10
1 Shutter speed/
Countdown of Noise Reduction
2 Aperture value nr : Noise Reduction is
3
4
Mirror Lock-up Shooting (p.149)
5
6
7
8 Flash Exposure Compensation
9 Sensitivity/EV compensation value
10 ISO/ISO AUTO
Appears when the sensitivity is displayed.
11 12 13 14
b : Built-in flash is ready
(when blinking, flash should be used)
> : Red-eye Reduction
3 : Auto Flash Discharge
Q : Slow-speed Sync
E : Trailing Curtain Sync w : Wireless
9 j
: Single Frame Shooting
: Continuous Shooting g : Self-timer Shooting
W : Remote Control Shooting
1 : RAW capture
1 P : RAW+JPEG capture
14 Remaining image storage capacity/USB Connection mode
Pc-S : MSC mode
Pc-P : PTP mode
1
LCD panel is illuminated when the exposure metering is performed. You can
choose [High], [Low] or [Off] for LCD panel backlight in [22. LCD Panel
Illumination] of the [A Custom Setting 4] menu (p.92).
38
Electronic level display
When the camera is not level, a bar graph indicating the horizontal camera angle is displayed in the viewfinder and on the LCD panel.
1
When level (at 0°)
When tilted 5° to the left
When held vertically and tilted 3° to the right
• [Electronic Level] is P (Off) by default. Set in the [A Rec. Mode 4]
• The composition can also be adjusted in the camera when the camera
is stabilized using a tripod. (p.220)
How to Change Function Settings
Function settings can be changed using the direct keys, control panel or menus. Some functions can be changed using both the control panel and menus.
This section explains the basic ways to change function settings.
1
Using the Direct Keys
In Capture mode, you can set Drive Mode, Flash Mode, White Balance and
Custom Image by pressing the four-way controller (2345). (p.88)
Below, how to set [Flash Mode] is explained as an example.
1
Press the four-way controller (3) in Capture mode.
The [Flash Mode] screen appears.
39
2
Use the four-way controller (45) to select a flash mode.
Flash Mode
Flash On
3
Press the 4 button.
The camera is ready to take a picture.
MENU Cancel
0.0
OK OK
40
While direct key operation is enabled, the guide indicators for the direct keys
are displayed in blue (when [Status Screen] (p.295) in the [R Set-up 1] menu
is set to [Display Color 1]). Direct key operation is not available when the AF point switching dial is set to j and the AF point is being changed. In such
cases, press and hold the 4 button. (p.129)
1
Using the Control Panel
While shooting, the current settings can be checked on the status screen.
You can also switch the display to the control panel and change settings.
Following, how to set [JPEG Quality] is explained as an example.
1
Check the status screen and then
press the M button.
The control panel appears.
Press the M button when the status screen is not displayed.
P AF.S
1/ 2000 F 2.8
ISO
AUTO
1600
±0.0
±0±0
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
2
Use the four-way controller
(2345) to select an item you want to change the setting for.
You cannot select items that cannot be changed in a given camera status.
ISO AUTO Setting
Adjustment Range
ISO
AUTO
200-1600
JPEG 16
M
HDR
OFF
[ 37 ]
3
Use the front e-dial (R) or rear
e-dial (S) to change the setting.
JPEG Quality
ISO
AUTO
200-1600
JPEG 16
M
41
HDR
OFF
[ 37 ]
1
4
Press the 3 button.
The camera returns to the status screen and is ready to take a picture.
• Press the 4 button in Step 3 to display the detailed setting screen for the selected item. Make the detailed settings for functions such as Extended
Bracketing and Digital Filter on the detailed setting screen.
• The status screen and control panel are not displayed when Live View
(p.165) is displayed. Make or change necessary settings in the [A Rec.
Mode] menu in advance.
42
Using the Menus
1
This section explains how to use the menus: [A Rec. Mode],
[Q Playback], [R Set-up] and [A Custom Setting] menus.
Following, how to set [Program Line] in the [A Rec. Mode 3] menu is explained as an example.
1
Press the 3 button in
Capture mode.
The [A Rec. Mode 1] menu appears on the monitor.
If the 3 button is pressed in
Playback mode, the [Q Playback 1] menu appears.
2
Press the four-way controller (5)
twice or turn the rear e-dial (S) two clicks to the right (toward y ).
1 2 3 4 5
File Format
JPEG Recorded Pixels
JPEG Quality
AUTO AF Point Setting
Lens Correction
Each time the four-way controller ( 5 ) is pressed, the menu will change in the following sequence: [A Rec. Mode 2], MENU Exit
[A Rec. Mode 3], [A Rec. Mode 4],
[A Rec. Mode 5], [Q Playback 1] … [A Rec. Mode 1].
JPEG
16
M
11
When the front e-dial (R) is turned to the right, the menu will change in the following sequence: [A Rec. Mode 1], [Q Playback 1],
[R Set-up 1], [A Custom Setting 1].
3
Use the four-way controller (23) to choose an item.
1 2 3 4 5
D-Range Setting
ISO AUTO Setting
High-ISO NR
Slow Shutter Speed NR
Program Line
Color Space
RAW File Format
MENU Exit
ISO
NR
AUTO
NR
AUTO sRGB
PEF
4
Press the four-way controller
(5).
Available settings are displayed.
The frame moves to the pop-up menu if there is one. When there is a submenu, it is displayed.
1 2 3 4 5
D-Range Setting
ISO AUTO Setting
High-ISO NR
Slow Shutter Speed NR
Program Line
Color Space
RAW File Format
MENU Exit
ISO
NR
AUTO
NR
AUTO sRGB
PEF
5
Use the four-way controller (23) to select a setting.
1 2 3 4 5
D-Range Setting
ISO AUTO Setting
High-ISO NR
Slow Shutter Speed NR
Program Line
Color Space
RAW File Format
MENU Cancel
ISO
NR
AUTO
NR
ON sRGB
PEF
OK OK
6
Press the 4 button.
The setting is saved.
Press the 3 button if a submenu is displayed.
Next, set other items.
43
1
7
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Even after you press the 3 button and close the menu screen, your settings will not be saved if the camera is turned off improperly (such as by removing the battery while the camera is on).
44
1
• You can select whether to display the menu tab selected the last time first, or
to always display the [A Rec. Mode 1] menu first. (p.294)
• Refer to the following pages for details on each menu.
• [A Rec. Mode] menu 1
• [Q Playback] menu
• [R Set-up] menu
1
1
• [A Custom Setting] menu 1p.91
Using the Mode Dial
45
You can switch the exposure modes by setting the icons on the mode dial to the dial indicator.
Turn the mode dial while pressing the mode dial lock button.
1
Mode dial Dial indicator
Mode dial lock button
A
B
Green e
Hyper-program
K
Mode
Sensitivity Priority b
Shutter Priority c
Aperture Priority
L
Shutter & Aperture
Priority a
Hyper-manual
Characteristics
Lets you capture images with the saved exposure mode. Up to five settings can be saved.
Lets you capture images with fully automatic settings.
Automatically sets the shutter speed and aperture value to obtain a proper exposure according to
Program Line when taking pictures. You can use the front and rear e-dials to switch between shutter priority and aperture priority.
Automatically sets the shutter speed and aperture value to obtain a proper exposure according to the set sensitivity.
Lets you set the desired shutter speed for expressing the movement of the subject.
Lets you set the desired aperture value for controlling the depth of field.
Automatically sets the sensitivity to obtain a proper exposure with the set shutter speed and aperture value according to the brightness of the subject.
Lets you set the shutter speed and aperture value to capture the picture with creative intent.
Page
46
1
Mode p
Bulb
M
Flash X-sync
Speed
C
Movie
Characteristics
Lets you capture images that require slow shutter speeds such as fireworks and night scenes.
The shutter speed is locked at 1/180 second. Use this when using an external flash that does not automatically set the sync speed.
Page
Use this to record movies.
2
Getting Started
This chapter explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions.
Attaching the Strap ..............................................48
Inserting the Battery ............................................49
Inserting/Removing an SD Memory Card ...........55
Attaching a Lens ..................................................59
Adjusting the Viewfinder Diopter ........................61
Turning the Camera On and Off ..........................62
Initial Settings .......................................................63
48
Attaching the Strap
2
1
Pass the end of the strap through the protective cover and triangular ring.
2
Secure the end of the strap on the inside of the clasp.
3
Attach the other end of the strap in the same manner as described above.
Inserting the Battery
49
Insert the battery into the camera. Use only a D-LI90 battery.
Charging the Battery
When using the battery for the first time, or when the battery has not been used in a long time, or when [Battery depleted] appears, recharge the battery.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6ft (1.8m)”
Indicator lamp
Lithium-ion battery
3
2
2
1 AC plug cord
Battery charger
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Face the 2 mark on the exclusive battery up and insert it into the battery charger.
The indicator lamp is lit during charging and turns off when the battery is fully charged.
4
When the battery is fully charged, remove the battery from the battery charger.
50
2
• Do not use the provided battery charger D-BC90 to charge batteries other than rechargeable lithium-ion battery D-LI90. Charging other batteries may cause damage or heating.
• If the battery is correctly oriented and inserted into the battery charger but the indicator lamp is not lit, the battery is faulty. Use a new battery in the camera.
• The maximum charging time is approximately 390 minutes (it depends on temperature and remaining battery power.) Charge in a location where the temperature is between 0°C and 40°C.
• If battery usage time is reduced even when properly charged, the battery has reached the end of its life. Use a new battery in the camera.
Inserting/Removing the Battery
When using the battery for the first time, charge the battery and insert it into the camera.
• Do not open the battery cover or remove the battery while the power is on.
• Remove the battery when you will not use the camera for a long while. The battery may leak.
• If the date and time settings have been reset when you install a new battery after a long time has passed since the battery was removed, follow the
procedure for “Setting the Date and Time” (p.67).
• Insert the battery correctly. Batteries inserted incorrectly may cause a camera breakdown. Wipe the electrodes of the battery with a soft dry cloth before inserting.
• Be careful as the camera or battery may become hot when the camera is used continuously for a long period of time.
1
Open the battery cover.
Lift the battery cover unlock knob, turn it towards OPEN (1) to unlock, and then pull the cover open (2).
1
2
2
Face the 2 mark on the battery towards outside of the camera, push the battery lock lever in the direction of the
arrow (3) and insert the battery.
Insert until the battery locks.
To remove the battery, push the battery lock lever in the direction of the arrow (3) with your finger.
Remove the battery when it pops out slightly.
3
51
2
Battery lock lever
3
Close the battery cover (4) and turn the battery cover unlock
knob towards CLOSE (5) to lock.
Stow the battery cover unlock knob after closing the battery cover.
5
4
Use the AC adapter kit K-AC50 (optional) when using the camera for a
52
Battery Level Indicator
2
You can confirm remaining battery level by checking the w /A displayed on the status screen and LCD panel.
Status
Screen w (Green) x (Green) y (Yellow) z (Red)
[Battery depleted]
LCD Panel
A
B
C
D lit
D blinks
Battery Level
Battery is full.
Battery is close to full.
Battery is running low.
Battery is almost empty.
The camera turns off after displaying the message.
(D continues blinking on the LCD panel.)
•
• y, z (red), C or D may appear even when the battery level is sufficient if the camera is used at low temperatures or when performing continuous shooting for a long period of time. In this situation, turn the camera off and on again. If w or A appears, you can use the camera.
W is displayed when using the AC adapter.
Approximate Image Storage Capacity and
Playback Time (Battery Fully Charged)
Battery
D-LI90
(Temperature)
(23°C)
( 0°C)
Normal
Recording
980
810
Flash Photography
50% Use 100% Use
740
680
610
560
Playback Time
440 minutes
400 minutes
The image storage capacity (normal recording, flash use 50%) is based on measuring conditions in accordance with CIPA standards, while other data is based on our measuring conditions. Some deviation from the above figures may occur in actual use depending on shooting mode and shooting conditions.
• Battery performance temporarily decreases as the temperature decreases.
When using the camera in cold climates, have extra batteries on hand and keep them warm in your pocket. Battery performance will return to normal when returned to room temperature.
• Have extra batteries ready when traveling overseas, taking pictures in cold climates, or taking a lot of pictures.
53
Using the AC Adapter (Optional)
We recommend the use of the AC adapter kit K-AC50 (optional) when using the monitor for a long time or when connecting the camera to a computer or AV device.
1
Make sure the camera is turned off.
2
Open the terminal cover.
2
3
Face the 2 mark on the DC terminal of the AC adapter
towards the 2 mark on the camera, and connect the DC terminal to the DC input terminal of the camera.
54
4
Connect the AC plug cord to the AC adapter.
5
Plug the AC cord into the power outlet.
2
• Make sure the camera is turned off before connecting or disconnecting the
AC adapter.
• Make sure connections are secure between the terminals. SD Memory Card or data may be corrupted if disconnected while the card is being accessed.
• Be sure to read the manual of the AC adapter kit K-AC50 when using the AC adapter.
• The battery in your camera will not charge when connected to the AC adapter.
Inserting/Removing an SD Memory
Card
This camera uses either an SD Memory Card or an SDHC Memory Card
(commercially available). Both cards are referred to as SD Memory Cards hereafter. Make sure the camera is turned off before inserting or removing the SD Memory Card.
55
2 • Do not remove the SD Memory Card while the card access lamp is lit.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been used on other cameras or digital devices. Refer to “Formatting the
SD Memory Card” (p.281) for details on formatting.
• Use a high-speed memory card when recording movies. If a write speed cannot keep up with a recording speed, the writing may stop during recording.
1
Make sure the camera is turned off.
2
Slide the card cover in the direction of the arrow and then
lift it to open (1´2).
1
2
3
Insert the card all the way with the SD Memory Card label facing toward the monitor.
56
Push the SD Memory Card in once to remove.
2 4
Close the card cover (3) and then slide it in the direction of the
arrow (4).
4
3
Be sure to fully close the card cover. The camera will not turn on if the card cover is open.
Precautions When Using the SD Memory Card
• The SD Memory Card is equipped with a write-protect switch. Setting the switch to
LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being
Write-protect switch formatted by the camera or computer.
• The SD Memory Card may be hot when removing the card immediately after using the camera.
• Do not remove the SD Memory Card or turn off the power while the card is being accessed. This may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.
• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following circumstances.
We do not accept any liability for data that is deleted if
(1) the SD Memory Card is mishandled by the user.
(2) the SD Memory Card is exposed to static electricity or electrical interference.
(3) the SD Memory Card has not been used for a long time.
(4) the SD Memory Card or the battery is removed while the card is being accessed.
57
• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.
• Avoid using or storing the card where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the card in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.
• Format new SD Memory Cards. Also format SD Memory Cards used with other cameras.
1
Formatting the SD Memory Card (p.281)
• The data on your SD Memory Card should be managed at your own risk.
2
Recorded Pixels and Quality Level
When the File Format is JPEG
Choose the number of recorded pixels (size) and quality level (JPEG data compression rate) of pictures according to how you intend to use the pictures you have taken.
Pictures with larger recorded pixels or more stars (E) are clearer when printed.
However, the number of pictures that can be taken (the number of pictures that can be recorded on an SD Memory Card) decreases with larger file sizes.
The quality of the captured photo or printed picture depends on the quality level, exposure control, resolution of the printer and a variety of other factors so you do not need to select more than the required number of pixels. For example, to print in postcard size, i (1728×1152) is adequate. Set the appropriate recorded pixels and quality level depending on how the picture will be used.
1
Setting the JPEG Recorded Pixels (p.200)
1
Setting the JPEG Quality Level (p.201)
58
2
JPEG Recorded Pixels, JPEG Quality and Approximate Image
Storage Capacity
(When using a 2 GB SD Memory Card)
JPEG Quality
Z
Premium
C
Best
D
Better
E
Good
JPEG Rec. Pixels p
(4928×3264)
J (3936×2624)
P
(3072×2048) i (1728×1152)
134
208
339
1041
214
332
543
1617
379
585
945
2793
749
1138
1807
5121
• The number of storable images may vary depending on the subject, shooting conditions, shooting mode and SD Memory Card, etc.
When the number of storable images exceeds 500, captured images are divided into folders containing 500 images each. However, in Auto Bracketing, images will be stored in the same folder until shooting is completed, even if the number of images exceeds 500.
When the File Format is RAW
With the X, you can record in the versatile JPEG format or the high quality and editable RAW format. For RAW file format, you can select
PENTAX’s original PEF format or general-purpose DNG (Digital Negative) format designed by Adobe Systems. On a 2 GB SD Memory Card, you can record up to 58 images in either PEF or DNG format.
1
Attaching a Lens
Attach a proper lens to the camera’s body.
When you use one of the following lenses with the X, all the camera’s exposure modes will be available.
(a) DA, DA L, D FA, FA J lenses an (Auto) position, when used in the s position
2
Turn the camera off before attaching or removing the lens to prevent unexpected lens movement.
• When lenses described in (b) are used in a position other than s, some
functions will be restricted. Refer to “Notes on [27. Using Aperture Ring]”
• With factory default setting, the camera will not work with lenses other than
those listed above and accessories. Set [27. Using Aperture Ring] to
[Permitted] in the [A Custom Setting 4] menu to use them. (p.339)
1
Make sure the camera is turned off.
2
Remove the body mount cover
(1) and lens mount cover (2).
Be sure to put the lens down with the lens mount side facing upward to protect the lens mount from damage.
3
Align the Lens mount index (red
dots; 3) on the camera and the lens, and secure by turning the lens clockwise until it clicks.
After attaching, turn the lens counterclockwise to check that the lens is locked in place.
3
59
60
4
Remove the front lens cap by pushing the indicated portions inward.
2
To detach the lens, hold down the lens unlock button (4) and turn the lens counterclockwise.
4
• We assume no responsibility nor liability for accidents, damages and malfunctions resulting from the use of lenses made by other manufacturers.
• The camera body and lens mount incorporate lens information contacts and an AF coupler. Dirt, dust, or corrosion may damage the electrical system.
When necessary, clean the contacts with a soft dry cloth.
The body mount cover (1) is a cover to prevent scratches and block dust when shipped. Body Mount Cap K is sold separately and has a lock function.
Adjusting the Viewfinder Diopter
Adjust the viewfinder diopter to suit your eyesight.
If it is difficult to see the viewfinder image clearly, slide the diopter adjustment lever sideways.
You can adjust the diopter from approximately -2.5 to +1.5 m
-1
.
1
Look through the viewfinder and slide the diopter adjustment lever left or right.
Adjust the lever until the AF frame in the viewfinder is focused.
Point the camera at a white wall or other bright and consistent surface.
61
2
AF frame
• The Eyecup F
R
is attached to the viewfinder portion when the camera leaves the factory. Diopter can be adjusted with the Eyecup F
R
attached. However, adjustment is easier with the eyecup removed.
• To remove the Eyecup F
R
, pull it out in the direction of the arrow.
To attach the Eyecup F
R
, align it with the groove on the viewfinder eyepiece and push it into the position.
• If it is difficult to see the viewfinder image clearly even if you use the diopter adjustment lever, use the optional diopter correction lens adapter M. However, the
Eyecup F
R
must be removed to use this
62
Turning the Camera On and Off
2
1
Turn the main switch to [ON].
The camera will turn on.
Set the main switch to the position [OFF] to turn off the camera.
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform any operations within a set period of time. To reactivate the camera, turn it on again or perform any of the following.
- Press the shutter release button halfway.
- Press the Q button, 3 button or M button.
• By default, the camera is set to turn off automatically after 1 minute of inactivity. You can change the setting in [Auto Power Off] of the [R Set-up 3]
Initial Settings
The first time the camera is turned on after purchasing, the [Language/ u] screen appears on the monitor. Follow the procedure below to set the language displayed on the monitor and the current date and time. Once these settings are made, you will not need to set them again next time you turn on your camera.
If the [Date Adjustment] screen appears, set the date and time by following the procedure
in “Setting the Date and Time” (p.67).
MENU Cancel OK OK
Date Adjustment
Date Format
Date
Time
01 / 01 / 2010
24h
Settings complete
MENU Cancel
2
Setting the Display Language
You can choose the language in which the menus, error messages, etc. are displayed from the following: English, French, German, Spanish,
Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech,
Hungarian, Turkish, Greek, Russian, Korean, Traditional Chinese,
Simplified Chinese and Japanese.
1
Use the four-way controller
(2345) to select the desired language.
63
MENU Cancel OK OK
64
2
Press the 4 button.
The [Initial Setting] screen appears in the selected language.
Press the four-way controller (3) twice and
proceed to Step 10 on p.65 if W
(Hometown) does not have to be changed.
2
3
Press the four-way controller (3).
The cursor moves to W .
4
Press the four-way controller (5).
The [W Hometown] screen appears.
5
Use the four-way controller (45) to select a city.
Initial Setting
English
New York
Text Size Standard
Settings complete
MENU Cancel
Hometown
New York
DST
MENU Cancel
6
Press the four-way controller (3).
The cursor moves to [DST] (daylight saving time).
7
Use the four-way controller (45) to select O or P.
8
Press the 4 button.
The camera returns to the [Initial Setting] screen.
9
Press the four-way controller (3).
The cursor moves to [Text Size].
10:00
OK OK
10
Press the four-way controller (5) and use the four-way controller
(23) to select [Standard] or
[Large].
Selecting [Large] increases the text size of the selected menu items.
Initial Setting
English
New York
Text Size Standard
Large
Settings complete
MENU Cancel OK OK
11
Press the 4 button.
12
Press the four-way controller (3) to select [Settings complete].
Initial Setting
English
New York
Text Size Standard
Settings complete
MENU Cancel OK OK
13
Press the 4 button.
The [Date Adjustment] screen appears.
65
2
In this manual, the menu screens hereafter are described with [Text Size] set to [Standard].
66
2
When the Wrong Language is Set
If you mistakenly select the wrong language in the [Language/ u] screen and proceed to the [Date Adjustment] screen, you can perform the following operation to set the language back.
If you have proceeded to switch the camera to Capture mode (and the camera is ready to take a picture), perform the following operation from
Step 2 to set the language back.
1
Press the 3 button once to display the guides on the monitor.
P ί υ Έ ρ θ ু ൲ Ⴚ
The screen shown on the right is an example of the guides displayed. The displayed screen will vary depending on the selected language.
RAW
AF
RAW P
AF ΅ λ ϋ Γ σ
Tv
Av
The guides appear on the monitor for 3 seconds.
2
Press the 3 button once.
2010/01/01 10:30AM
[A 1] is displayed in the upper tab.
3
Press the four-way controller (5) six times.
[R 1] is displayed in the upper tab.
4
Press the four-way controller (3) to select [Language/ u].
5
Press the four-way controller (5).
The [Language/ u] screen appears.
6
Use the four-way controller (2345) to select the
desired language and press the 4 button.
The [R Set-up 1] menu in the selected language appears.
Refer to the following pages and set the desired city for [Hometown] and the current date and time as necessary.
• To change the hometown: “Setting the World Time” (p.289)
• To change the date and time: “Changing the Date and Time
• When the hometown and the date and time are not set, the [Initial Setting] screen or [Date Adjustment] screen will be displayed again next time the camera is turned on.
• If you have not proceeded to the [Date Adjustment] screen, you can reselect a language using the four-way controller (5) in the [Language/ u] screen.
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
2
Use the four-way controller (23) to choose the date format.
Choose [mm/dd/yy], [dd/mm/yy] or [yy/ mm/dd].
Date Adjustment
Date Format
Date 01 / 01 / 2010
24h
Time
Settings complete
MENU Cancel OK OK
3
Press the four-way controller (5).
The frame moves to [24h].
4
Use the four-way controller (23) to select 24h (24-hour display) or
12h (12-hour display).
Date Adjustment
Date Format
Date
/ / /
01 / 01 / 2010
Time
Settings complete
MENU Cancel OK OK
5
Press the four-way controller (5).
The frame returns to [Date Format].
6
Press the four-way controller (3).
The frame moves to [Date].
2
67
68
2
7
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller (23) to set the month.
Set the day and year in the same manner.
Next, set the time.
If you select [12h] in Step 4, the camera switches between am and pm depending on the time.
9
Press the four-way controller (3) to select [Settings complete].
Date Adjustment
Date Format
Date
Time
/
01 / 01 / 2010
24h
Settings complete
MENU Cancel OK OK
Date Adjustment
Date Format
Date
/ /
09 / 09 / 2010
24h
Time
Settings complete
MENU Cancel OK OK
10
Press the 4 button.
The camera returns to the status screen and is ready to take a picture.
If you set the date and time from the menu, the screen will return to the
[R Set-up 1] menu. In this case, press the 3 button.
Pressing the 3 button while setting the date and time cancels the settings made up to that point and switches the camera to Capture mode. After initial settings are complete, if the camera power is turned off before the date and time settings are complete, the [Date Adjustment] screen will appear first next time you turn the camera on. In this case, you can also set the date and time
• When you press the 4 button in Step 10, the seconds value is set to 0. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 0 seconds.
• You can change the language and date and time settings from the menu.
3
Basic Operations
This chapter explains basic operations for shooting by setting mode dial to Green mode (automatic exposure according to the program line set to j) to ensure successful capturing.
For information about advanced functions and settings for taking pictures, refer to chapter 4 and onward.
Basic Shooting Operation ...................................70
Using a Zoom Lens ..............................................76
Using the Built-in Flash .......................................77
Playing Back Pictures ..........................................83
70
Basic Shooting Operation
3
Holding the Camera
How you hold the camera is important when taking pictures.
• Hold the camera firmly with both hands and keep your elbows close to your body.
• Press the shutter release button gently when taking a picture.
Horizontal position Vertical position
• To reduce camera shake, support your body or the camera on a solid object such as a table, tree, or wall.
• Although there are individual differences among photographers, the slowest possible shutter speed for a handheld camera is generally 1/(focal length
×1.5). For example, it is 1/75 of a second for a focal length of 50 mm and 1/
150 of a second for 100 mm. Use a tripod or the Shake Reduction function
(p.139) when using a slower shutter speed.
• When using a telephoto lens, a tripod that is heavier than the total weight of the camera and lens is recommended to avoid camera shake.
• Do not use the Shake Reduction function when using the camera on a tripod.
Letting the Camera Choose the Optimal
Settings
The X features various exposure modes, focus modes, and drive modes for expressing your photographic vision. This section explains how to take pictures by simply pressing the shutter release button.
1
Set the mode dial to B.
Turn the mode dial while pressing the mode dial lock button.
The exposure mode changes to B
(Green) mode. In B, a proper exposure is determined by the camera and the shutter speed and aperture value are automatically set.
3
71
2
Set the focus mode lever to l.
The focus mode changes to l
(Autofocus/Single) mode. When the shutter release button is pressed halfway in l, the camera focuses
Mode dial lock button
72
3
Look through the viewfinder to view the subject.
A zoom lens can be used to change the
size of the subject in the viewfinder. (p.76)
3
4
Position the subject inside the
AF frame and press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when the subject comes into focus.
AF assist light turns on in a dark or backlit location, but the flash does not pop up automatically. If the flash is necessary, the flash status E blinks in the viewfinder.
Press the E button to pop up the flash.
1
Operating the shutter release button
1
Subjects that are difficult to focus on
1
Using the Built-in Flash (p.77)
1
Selecting the Focusing Area (AF
5
Press the shutter release button fully.
The picture is taken.
This action is referred to as “releasing the shutter” or “release”.
Flash status
Focus indicator
6
Review the captured image on the monitor.
The image appears for 1 second on the monitor shortly after capturing (Instant
Review).
1
Setting the Display for Instant
You can magnify the image during Instant
Review with the rear e-dial (S). (p.237)
You can delete the image during Instant
Review by pressing the i button.
1
Deleting a Single Image (p.84)
• Refer to p.103 for details on using B (Green) mode.
• You can set the camera so that pressing the = button will focus automatically, in the same way as pressing the shutter release button
• You can display the Optical Preview and check the composition, exposure,
and focus before taking pictures. (p.135)
73
3
74
Operating the shutter release button
The shutter release button has two working positions.
3
Not pressed Pressed halfway
(first position)
Pressed fully
(second position)
Pressing it down halfway (first position) displays the indicators in the viewfinder and the autofocus system operates. Pressing it fully
(second position) takes a picture.
• Press the shutter release button gently when taking a picture to prevent camera shake.
• Practice pressing the shutter release button halfway/fully to learn where the first position and second position are.
• The viewfinder indicators are displayed while the shutter release button is pressed halfway. The indicators are displayed for about 10 seconds
(default setting) while the exposure metering timer is on after you take
your finger off the button. (p.35, p.118)
75
Subjects that are difficult to focus on
The autofocus mechanism is not perfect. Focusing may be difficult when taking pictures under the following conditions. These also apply to manual focusing using the focus indicator ] in the viewfinder.
(a) Extremely low-contrast subjects such as a white wall in the focusing area
(b) Subjects which do not reflect much light within the focusing area
(c) Fast moving objects
(d) Strongly reflected light or strong backlighting (bright background)
(e) If repeating vertical or horizontal line patterns appear within the focusing area
(f) Multiple subjects in the foreground and background within the focusing area
If the subject cannot be focused automatically, set the focus mode lever to \ and use the manual focus mode to focus on the subject
with the aid of the matte field in the viewfinder. (p.133)
The subject may not be focused even when the ] (focus indicator) is displayed when (e) and (f) above apply.
3
76
Using a Zoom Lens
3
Enlarge the subject (telephoto) or capture a wider area (wide angle) with a zoom lens. Adjust the subject to the desired size and take pictures.
1
Turn the zoom ring to the right or left.
Turn the zoom ring clockwise for telephoto and counterclockwise for wide angle.
Wide Angle Telephoto
• The smaller the number displayed for the focal length, the wider the angle.
The larger the number, the more magnified the image appears.
• Power Zoom (Auto Zoom) is available if a Power Zoom compatible FA lens
is used with this camera. (p.337)
Using the Built-in Flash
77
Use the following procedures to take pictures in low light or backlit conditions and when you want to use the built-in flash.
The built-in flash is optimum for a subject at a distance from 0.7 m to 5 m.
Exposure will not be properly controlled and vignetting (darkening of the corners of the image due to a lack of light) may occur when used at a distance closer than 0.7 m (this distance varies slightly depending on the
lens being used and set sensitivity. (p.185))
3
Compatibility of built-in flash and lens
Vignetting may occur depending on the lens being used and the capture conditions. We recommend taking a test shot to check the compatibility.
1
Lens Compatibility with the Built-in Flash (p.186)
• When using the built-in flash, remove the lens hood before shooting.
• The built-in flash fully discharges for lenses without a function to set the lens aperture ring to s (Auto).
For details on the built-in flash and instructions on how to take pictures with an
external flash, refer to “Using the Flash” (p.181).
Setting the Flash Mode
C
D
E
F
Flash Mode
Auto Flash
Discharge
Auto Flash+
Red-eye Reduction
Flash On
Flash On+
Red-eye Reduction
Function
Discharges the flash automatically in dark or backlit conditions.
Discharges a pre-flash for red-eye reduction before the automatic flash.
Discharges the flash for each picture.
Discharges a pre-flash for red-eye reduction before the main flash.
78
3
G
H
I k r
Flash Mode
Slow-speed Sync
Slow-speed Sync+
Red-eye Reduction
Trailing Curtain
Sync
Wireless Mode
Function
Sets to a slow shutter speed depending on the brightness. For example, when using this to shoot a portrait with the sunset in the background, both the person and the background are captured beautifully.
Discharges a pre-flash for red-eye reduction before the main flash is discharged with Slow-speed Sync.
Discharges the flash immediately before closing the shutter curtain. Captures moving objects as if they
are leaving a trail behind. (p.184)
You can synchronize a dedicated external flash
(AF540FGZ or AF360FGZ) without using a sync
The flash modes that can be selected differ depending on the exposure mode.
Exposure Mode
B e /c/K b /L/a/p
M
A
Selectable Flash Mode
C /D
E /F/G/H/I/r
E /F/k/r
E /F/r
According to the saved settings
Restrictions
No flash compensation
-
-
-
1
Press the four-way controller (3) in Capture mode.
The [Flash Mode] screen appears.
The flash modes that can be selected for the set exposure mode appear.
2
Use the four-way controller (45) to select a flash mode.
When not in B (Green) mode, turn the rear e-dial (S) to perform the flash
Flash Mode
Flash On
MENU Cancel
0.0
OK OK
3
Press the 4 button.
The camera is ready to take a picture.
Using Built-in Flash
1
Press the E button.
The built-in flash pops up and begins charging. When the flash is fully charged,
E appears in the viewfinder and on the
2
Press the shutter release button fully.
The picture is taken.
When the mode dial is at B, the flash is not discharged if the lighting conditions do not require flash for correction even when the flash is popped up.
[Flash On] is used if the flash is popped up when the mode dial is at a position other than B.
79
3
80
3
Push down on the portion indicated in the illustration to retract the built-in flash.
3
Using Red-eye Reduction Flash
“Red-eye” is the phenomenon where eyes look reddish in photographs taken in dark environments with a flash. This is caused by the reflection of the electronic flash in the retina of the eye.
Red-eye occurs because pupils are dilated in dark environments.
This phenomenon cannot be averted but the following measures can be used to combat it.
• Brighten the surroundings when shooting.
• Set to wide angle and move closer to the subject if a zoom lens is in use.
• Use a flash that supports red-eye reduction.
• Position the flash as far away from the camera as possible when using an external flash.
The red-eye reduction function on this camera reduces a red-eye effect by discharging the flash twice. With the red-eye reduction function, the pre-flash is discharged just before the shutter is released. This reduces pupil dilation. The main flash is then discharged while the pupils are smaller, reducing the red-eye effect.
To use the red-eye reduction function, select D in B mode, or F or H in other modes.
81
Daylight-Sync Shooting
In daylight conditions, the flash will eliminate shadows when a portrait picture is taken with a shadow cast on a person’s face. Use of the flash in this way is called Daylight-Sync shooting. [Flash On] is used when shooting with Daylight-Sync shooting.
Taking pictures (in e mode)
1 Pop up the built-in flash manually and confirm that the flash mode is set to E.
2 Confirm that the flash is fully charged.
3 Take a picture.
3
Without Daylight-Sync With Daylight-Sync
The picture may be overexposed if the background is too bright.
82
Compensating for Flash Output
3
You can change the flash output in a range of -2.0 to +1.0. The flash compensation values are as follows for 1/3 EV and 1/2 EV.
Step Interval
1/3 EV
1/2 EV
Flash Compensation Value
-2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0.0, +0.3, +0.7, +1.0
-2.0, -1.5, -1.0, -0.5, 0.0, +0.5, +1.0
Set interval of steps in [1. EV Steps] (p.120) of the [A Custom Setting 1] menu.
1
Turn the rear e-dial (S) in the
[Flash Mode] screen.
The flash compensation value is displayed.
Press the | button to reset the flash output compensation value to 0.0.
Flash Mode
Flash On
+0.3
MENU Cancel OK OK
• The flash output compensation cannot be set in B (Green) mode.
• N appears in the viewfinder and on the LCD panel during the flash exposure
• When the flash output exceeds its maximum amount, the compensation will not be effective even if the compensation value is set to the plus (+) side.
• Compensating to the minus (-) side may not affect the image if the subject is too close, the aperture value is small or the sensitivity is high.
• The flash output compensation is also effective for external flash units which support P-TTL auto flash mode.
Enabling Shooting while Charging the Flash
You can set the camera to enable shooting while the flash is being charged.
Set [20. Release While Charging] to
[On] in the [A Custom Setting 3] menu
(p.92). By default, pictures cannot be
taken while the built-in flash is charging.
20.
Release While Charging
1
2
Off
On Cancel
Enables shutter release while the built-in flash is charging
MENU Cancel OK OK
Playing Back Pictures
Playing Back Images
You can play back captured images with the camera.
Use the provided “PENTAX Digital Camera Utility 4” software to play back
pictures using a computer. Refer to “Using the Provided Software” (p.320) for
details on the software.
1
Press the Q button.
The camera enters Playback mode and the most recently captured image (image with the highest file number) is displayed on the monitor. (For movies, only the first frame is displayed on the monitor.)
Press the M button during playback to switch the information display such as shooting information for the displayed image.
Refer to p.29 for details about display
information.
3
2
Press the four-way controller
(45).
4 : Displays the previous image.
5 : Displays the next image.
You can also display the next or previous image by turning the front e-dial (R).
83
84
3
• Refer to “Playback Functions” (p.233) for details on the playback mode
functions.
• When the file format of the last captured image is JPEG, and its data still remains in the buffer memory, you can additionally save the image in RAW format by pressing the L button during playback.
If the image was shot using any of the following settings, the corresponding
RAW image listed is saved.
- Multi-exposure RAW image with Multi-exposure
- Extended Bracketing RAW image with standard settings
- Digital Filter RAW image without filter effect
- HDR Capture
- Cross Processing
RAW image with standard exposure
RAW image without Cross Processing
Deleting a Single Image
You can delete images one by one.
• Deleted images cannot be restored.
• Protected images cannot be deleted. (p.254)
1
Press the Q button and use the four-way controller (45) to select an image to delete.
2
Press the i button.
The delete confirmation screen appears.
3
Use the four-way controller
(23) to select [Delete].
Select a file format to delete for images saved in RAW+ format.
Delete JPEG
Delete RAW
Delete
RAW+JPEG
Deletes only the JPEG image.
Deletes only the RAW image.
Deletes images in both file formats.
4
Press the 4 button.
The image is deleted.
Delete
Cancel
OK OK
When deleting multiple images at once, refer to “Deleting Multiple Images”
85
3
86
Memo
4
Shooting Functions
This chapter describes the various basic and advanced shooting functions available with the X.
How to Operate the Shooting Functions ............88
Setting the Exposure ...........................................93
Focusing .............................................................122
Checking the Composition, Exposure and
Focus Before Shooting (Preview) .....................135
Using the Shake Reduction Function to
Prevent Camera Shake ......................................139
Taking Pictures Continuously ...........................151
Shooting while Adjusting the Settings
(Auto Bracketing) ...............................................157
Taking Pictures Using Digital Filters ................162
Shooting with Live View ....................................165
Recording Movies ..............................................171
88
How to Operate the Shooting
Functions
You can change capture-related settings using the direct keys, control panel, [A Rec. Mode] menu or [A Custom Setting] menu.
For details on how to use the menus, refer to “Using the Menus” (p.42).
Direct Keys Setting Items
4
Press the four-way controller (2345) in
Capture mode to set the following items.
Key
2
3
4
Item
Drive Mode
Flash Mode
White Balance
5 Custom Image
Function
Sets Continuous Shooting, Self-timer,
Remote Control, Exposure Bracketing or Mirror Lock-up Shooting.
Sets the method of flash discharge.
Adjusts the color balance to match the type of the light source illuminating the subject.
Sets the image finishing tone such as color and contrast before shooting an image.
Page
89
Rec. Mode Menu Setting Items
The following settings can be performed in the [A Rec. Mode 1-5] menus.
Press the 3 button in Capture mode to display the [A Rec. Mode 1] menu.
Menu
A 1
A 2
Item
USER Mode
Exposure Mode
Setting
Extended
Bracketing
JPEG Recorded
Pixels
JPEG Quality
AUTO AF Point
HDR Capture
Cross Processing
Multi-exposure
Interval Shooting
Composition Adjust.
Function
Sets the settings for A mode.
Sets the exposure mode when the mode dial is set to A.
Sets the file format.
Sets the recording size of images saved in
JPEG format.
Sets the quality of images saved in JPEG format.
Sets the number of AF points when the focusing area is set to S (AUTO).
Corrects distortions and chromatic aberrations occurring due to lens properties.
Changes the hues and contrast by performing digital cross processing.
Sets the Extended Bracketing shooting settings.
Applies a digital filter effect when taking pictures.
Enables capturing images at high dynamic range.
Creates a composite picture by taking multiple frames.
Takes pictures at a set interval from a set time.
Adjusts the composition of your image using the Shake Reduction mechanism.
Page
4
90
4
Menu
A
A
A
3
4
5
D-Range Setting
ISO AUTO Setting
High-ISO NR
Slow Shutter Speed
NR
Program Line
Color Space
RAW File Format
Movie
Live View
Electronic Level
Horizon Correction
Shake Reduction
Instant Review
Digital Preview
Button
Item
Customization
Input Focal Length
E-Dial Programming
Memory
Save USER Mode
Function
Expands the dynamic range and prevents bright and dark areas from occurring.
Sets the range of automatic correction in
AUTO.
Sets whether to use Noise Reduction when shooting with a high ISO sensitivity.
Sets whether to use Noise Reduction in slow speed shooting.
Selects Program Line.
Sets the color space to use.
Sets the file format of images saved in
RAW format.
Page
Sets the movie settings.
Sets the Live View settings.
Sets whether to display the electronic level which detects whether the camera is level.
Corrects the tilt (right and left) of the image.
Reduces vertical and horizontal camera shake.
Sets the focal length when using a lens whose focal length information cannot be obtained.
Sets the Instant Review display settings.
Sets the Digital Preview settings.
Sets the functions assigned to the e-dials in each exposure mode.
Sets the functions for when the |/Y button, = button, or Preview dial is operated, or the shutter release button is pressed halfway.
Determines which settings to save when the power is turned off.
Saves the current camera settings as
A .
*1 Appears only when the mode dial is set to A.
*2 Can also be set using the control panel.
91
Custom Setting Menu Setting Items
Set the [A Custom Setting 1-4] menus to fully use the functions of a SLR camera.
Menu
A1
A2
Item
1. EV Steps
2. Sensitivity Steps
Function Page
Sets the adjustment steps for exposure. p.120
Sets the adjustment steps for ISO sensitivity.
Expands the lower and upper sensitivity limits.
3. Expanded
Sensitivity
4. Meter Operating
Time
5. AE-L with AF
Locked
Sets the exposure metering time.
6. Link AE to AF Point
7. Auto EV
Compensation
8. Auto Bracketing
Order
9. One-Push
Bracketing
10. WB Adjustable
Range
11. WB When Using
Flash
12. AWB in Tungsten
Light
13. Color Temperature
Steps
14. Superimpose AF
Area
Sets whether to lock the exposure value when the focus is locked.
Sets whether to link the exposure and
AF point in the focusing area during multi-segment metering.
Sets whether to compensate for automatically when the proper exposure cannot be determined.
Sets the order for Auto Bracketing shooting.
Sets whether to shoot all frames with one release when using Exposure
Bracketing.
Sets whether to automatically fine-tune the white balance when specifying the light source on the white balance setting.
Sets the white balance setting when using flash.
Sets whether to adjust the tungsten light color tone when the white balance is set to F (Auto White Balance).
Sets the adjustment steps for color temperature.
Sets whether to display the active AF point(s) in red in the viewfinder.
-
-
4
92
4
Menu
A3
A4
Control
Charging
Mode
Item
15. AF.S Setting
16. AF.C Setting
17. AF Assist Light
18. AF with Remote
19. Remote Control in
Bulb
20. Release While
21. Flash in Wireless
22. LCD Panel
Illumination
23. Saving Rotation
Info
Function
Sets the action priority for when the focus mode is set to l and the shutter release button is fully pressed.
Sets the action priority for Continuous
Shooting when the focus mode is set to k .
Sets whether to use the AF assist light when autofocusing in dark locations.
Sets whether to use autofocus when shooting with remote control.
Sets the remote control operation when using the remote control in p (Bulb) mode.
Sets whether to release shutter while the built-in flash is charging.
Sets the built-in flash discharge method in the wireless mode.
Sets the illumination for the LCD panel.
Page
24. Save Menu
Location
25. Catch-in Focus
Sets whether to save rotation information when shooting.
Sets whether to save the last menu tab displayed on the monitor and to display it again the next time the 3 button is pressed.
When set to [On], if the focus mode is set to l and a manual focus lens is attached, catch-in focus shooting is enabled and the shutter is released automatically when the subject comes into focus.
26. AF Fine
Adjustment
Adjusts the AF focusing position.
27. Using Aperture
Ring
Reset Custom
Functions
Sets whether to enable shutter release when the lens aperture ring is set to the position other than s.
Resets all the settings in the [A Custom
Setting 1-4] menus to the defaults.
Setting the Exposure
93
Effect of Aperture and Shutter Speed
Correct exposure of the subject is determined by a combination of shutter speed and aperture setting. There are many correct combinations of shutter speed and aperture value for a particular subject. Different combinations produce different effects.
Effect of Shutter Speed
By changing the shutter speed, you can manipulate how time is expressed in the pictures you create. Unlike with your own naked eyes, in a picture you can capture a fraction of a moment or a whole period of time, creating different effects.
Use the b (Shutter Priority) mode.
Using slower shutter speed
If the subject is moving, the image will be blurred because the shutter is open longer.
It is possible to enhance the effect of motion (rivers, waterfalls, waves, etc.) by intentionally using a slower shutter speed.
Using faster shutter speed
Choosing a faster shutter speed will allow freezing the action of a moving subject.
A faster shutter speed also helps to prevent camera shake.
4
Effect of Aperture
By changing the aperture, you can control the depth of the area that appears in focus in the picture (the depth of field). By either narrowing the focus to emphasize a single point or giving depth to your picture instead you can completely change the feel of the picture you create.
Use the c (Aperture Priority) mode.
94
4
Opening the aperture (reduce the aperture value)
Objects closer and farther than the focused subject will be more out of focus.
For instance, if you take a picture of a flower against a landscape with the aperture open, the landscape in front and behind the flower will be blurred, emphasizing only the flower.
Closing the aperture (increase the aperture value)
The range in focus expands forward and backward. For instance, if you take a picture of a flower against a landscape with the aperture narrowed, the landscape in front and behind the flower will be in focus.
Aperture and Depth of Field
The following table summarizes how the aperture affects the depth of field. The depth of field may also change depending on the lens used and the distance to the subject.
Aperture
Depth of field
Area of focus
Open
(Smaller value)
Shallow
Narrow
Close
(Larger value)
Deep
Wide
Lens focal length
Longer
(Telephoto)
Shorter
(Wide-angle)
Distance to the subject
Near Far
• The depth of field for the X differs depending on the lens but compared to a 35 mm camera, the value is roughly one aperture setting lower (the focused range becomes narrower).
• The wider the wide-angle lens, and the farther away the subject, the deeper the depth of field is (some zoom lenses do not have a scale for depth of field because of their designs).
Setting the Sensitivity
You can set the sensitivity to suit the brightness of the surroundings.
The sensitivity can be set to [AUTO] or within a sensitivity range equivalent to ISO 100 to 12800. The default setting is [AUTO].
1
Turn the rear e-dial (S) while
pressing the o button in
Capture mode.
The sensitivity displayed on the status screen and LCD panel and in the viewfinder changes.
Press the | button to set the sensitivity to
[AUTO].
P
1/ 200
ISO
AUTO
200
AF.S
F 5.0
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
ISO AUTO
2
Take your finger off the o button and rear e-dial (S).
The sensitivity is set.
4
95
96
4
• The sensitivity can also be changed by pressing the o button once, taking your finger off the button and turning the rear e-dial (S). In this case, the sensitivity is fixed when the o button is pressed again or the exposure
metering timer (p.118) elapses.
• When the exposure mode is set to B (Green), L (Shutter & Aperture Priority) or C (Movie), the sensitivity is fixed to [AUTO] and the setting cannot be changed.
• When the exposure mode is set to K (Sensitivity Priority), a (Hyper-manual), p (Bulb) or M (Flash X-sync Speed), the sensitivity cannot be set to [AUTO].
• When the exposure mode is set to p (Bulb), the upper sensitivity limit is ISO 1600.
• The sensitivity range can be expanded to a range of ISO 80 to 51200 when
[3. Expanded Sensitivity] in the [A Custom Setting 1] menu (p.91) is set to
[On]. However, the minimum sensitivity is ISO 160 when [Highlight
Correction] is set to [On] in [D-Range Setting] (p.214) of the [A Rec. Mode
3] menu.
• Captured images may show more noise if a higher sensitivity is set. You can
reduce image noise by setting [High-ISO NR] in the [A Rec. Mode 3] menu.
• You can select whether to set the sensitivity in increments of 1 EV or in
accordance with the EV step setting for exposure (p.120). This can be set in
[2. Sensitivity Steps] of the [A Custom Setting 1] menu (p.91).
Setting the Range of Automatic Sensitivity Correction
Set the range in which the sensitivity is automatically adjusted when the sensitivity is set to [AUTO]. The sensitivity is automatically corrected in the range of [ISO 100-3200] by default.
1
Select [ISO AUTO Setting] in the [A Rec. Mode 3] menu
and press the four-way controller (5).
The [ISO AUTO Setting] screen appears.
2
Press the four-way controller (5) and use the four-way controller
(23) to set the minimum sensitivity.
ISO AUTO Setting
ISOAUTO 100 3200
AUTO ISO Parameters
MENU
3
Press the four-way controller (5) and use the four-way controller
(23) to set the maximum sensitivity.
ISO AUTO Setting
ISOAUTO 100 3200
AUTO ISO Parameters
MENU Cancel OK OK
4
Press the 4 button.
5
Use the four-way controller (23) to select [AUTO ISO
Parameters] and press the four-way controller (5).
6
Use the four-way controller (23) to select the parameter and press
the 4 button.
ISO AUTO Setting
ISOAUTO 100 3200
AUTO ISO Parameters u Slow
Increases the sensitivity as little as possible s Standard
(default setting) a Fast
Actively increases the sensitivity
MENU
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
4
Expanding the Dynamic Range
Dynamic range is the ratio that indicates the light level expressed by the
CMOS sensor pixels from bright areas to dark areas. The larger it is, the better the whole range from dark to bright areas will appear in the picture.
By expanding the dynamic range, you can expand the light level expressed by the CMOS sensor pixels, making it more difficult for bright areas to occur in the image.
To expand the dynamic range, make the settings in [D-Range
Setting] of the [A Rec. Mode 3] menu. (p.214)
97
98
Reducing Image Noise (Noise Reduction)
When shooting with a digital camera, image noise (image roughness or unevenness) becomes noticeable in the following situations.
- when shooting with a long exposure
- when shooting with a high sensitivity setting
- when the temperature of the CMOS sensor is high
You can reduce image noise by using Noise Reduction. However, images shot with Noise Reduction will take longer to save.
4
High-ISO NR
Reduces noise at high sensitivity (ISO) settings.
1
Select [High-ISO NR] in the [A Rec. Mode 3] menu and
press the four-way controller (5).
The [High-ISO NR] screen appears.
2
Press the four-way controller (5) and use the four-way controller
(23) to select [Auto], [Off],
[Low], [Medium], [High] or
[Custom].
High-ISO NR
ISO
NR
AUTO
Auto
ISO
NR
OFF
Off
ISO
NR
ISO
NR
ISO
NR
ISO
NR
CUSTOM
Low
Medium
High
Custom
MENU Cancel OK OK
Auto
Off
Low/Medium/High
Custom
Applies Noise Reduction at optimally calculated levels throughout ISO range. (default setting)
Does not apply Noise Reduction at any ISO setting.
Applies Noise Reduction at constant chosen level throughout ISO range.
Applies Noise Reduction at user-defined levels for each ISO setting.
3
Press the 4 button.
If you select [Auto], [Off], [Low], [Medium], or [High], proceed to Step 7.
4
Use the four-way controller (23) to select [Setting] and
press the four-way controller (5).
The screen to set the noise reduction level according to the sensitivity appears.
5
Use the four-way controller (23) to select a sensitivity value and use
the four-way controller (45) to set the level of noise reduction which is applied to the selected sensitivity.
High-ISO NR
ISO 80
ISO
ISO
ISO
ISO
100
200
400
800
ISO 1600
ISO 3200
1 2
ISO
NR
OFF
ISO
NR
OFF
ISO
NR
ISO
NR
ISO
NR
ISO
NR
ISO
NR
OFF
OFF
Turn the rear e-dial (S) to display the
[High-ISO NR 2] screen.
MENU Reset
Press the | button to reset the setting of the selected sensitivity value.
The sensitivity values displayed vary according to the [1. EV Steps] and [2.
Sensitivity Steps] settings made in the [A Custom Setting 1] menu (p.91).
6
Press the 3 button.
The screen that was displayed in Step 2 appears again.
7
Press the 3 button twice.
The camera is ready to take a picture.
99
4
Slow Shutter Speed NR
Reduces noise during long exposures.
1
Select [Slow Shutter Speed NR] in the [A Rec. Mode 3]
menu and press the four-way controller (5).
2
Use the four-way controller (23) to select [Auto], [On] or [Off], and
press the 4 button.
1 2 3 4
D-Range Setting
ISO AUTO Setting
High-ISO NR
Slow Shutter Speed NR
Program Line
Color Space
RAW File Format
MENU Cancel
ISO
NR
AUTO
NR
AUTO
NR
ON
NR
OFF
PEF
OK OK
100
4
Auto
On
Off
Determines conditions such as shutter speed, sensitivity, and internal temperature, and automatically applies Noise
Reduction as necessary. (default setting)
Applies Noise Reduction when the exposure time is longer than 1 second.
Does not apply Noise Reduction.
3
Press the 3 button.
The camera is ready to take a picture.
• Processing may take a while when shooting with Slow Shutter Speed NR set to [On]. Pictures cannot be taken while an image is being processed.
• When the Noise Reduction function is activated, [nr] blinks on the LCD panel and in the viewfinder where the aperture value is normally displayed, and a countdown of processing time is displayed where the shutter speed is normally displayed.
Changing the Exposure Mode
This camera features the following nine exposure modes. Use the mode
dial to change the exposure mode. (p.45)
The settings available for each exposure mode are as follows.
(z: Available ×: Not available)
Exposure
Mode
B
Green e
Hyperprogram
Characteristics
Lets you capture images with fully automatic settings.
Automatically sets the shutter speed and aperture value to obtain a proper exposure according to
Program Line when taking pictures. You can use the front and rear e-dials to switch between shutter priority and aperture priority.
EV
Compensation
× z
Change
Shutter
Speed
Change
Aperture
Value
Change
Sensitivity
Page
× z
× z
× z
101
Exposure
Mode
Characteristics
K
Sensitivity
Priority
Automatically sets the shutter speed and aperture value to obtain a proper exposure according to the set sensitivity.
b
Shutter
Priority c
Aperture
Priority
L
Shutter
&
Aperture
Priority a
Hypermanual
Lets you set the desired shutter speed for expressing moving subjects.
Lets you set the desired aperture value for controlling the depth of field.
Automatically sets the sensitivity to obtain a proper exposure with the set shutter speed and aperture value according to the brightness of the subject.
Lets you set the shutter speed and aperture value to capture the picture with creative intent.
EV
Compensation z z z z
–
Change
Shutter
Speed
Change
Aperture
Value
Change
Sensitivity
Page
× z
× z z
×
× z z z
Other than
AUTO z z
×
AUTO only z
p
Bulb
Lets you capture images that require slow shutter speeds such as fireworks and night scenes.
× × z
Other than
AUTO
(up to
ISO
1600)
M
Flash
X-sync
Speed
The shutter speed is locked at 1/180 second.
Use this when using an external flash that does not automatically set the sync speed.
– × z
Other than
AUTO
4
For each exposure mode, you can set the functions for when the front/rear edial or the | button is operated. Set in [E-Dial Programming] of the [A Rec.
Mode 5] menu. (p.282) You can confirm the functions of the front and rear e-
dials and the | button by viewing the guides which appear on the monitor
when the camera is switched on or the mode dial is turned. (p.24)
102
4
Program Line
In [Program Line] of the [A Rec. Mode 3] menu, you can choose from the following Program Lines. When [eLINE] is selected for the |
button setting in e/K mode or L/a mode (p.282), exposure is
regulated according to the set Program Line.
j k
Setting
Auto
Normal l Hi-speed Priority m n o
DOF Priority
(deep)
DOF Priority
(shallow)
MTF Priority
Characteristics
Camera determines the appropriate settings.
Basic Program Automatic Exposure (default setting)
Program Automatic Exposure that prioritizes high shutter speeds.
Program Automatic Exposure that closes the aperture as much as possible for a deep depth of field.
Program Automatic Exposure that opens the aperture as much as possible for a shallow depth of field.
Program Automatic Exposure that prioritizes the best aperture settings for the attached lens when a DA, DA L, D FA, FA J or FA lens is used.
Using a Lens with an Aperture Ring
When using a lens with an aperture ring, set the aperture to the s (AUTO) position while holding down the autolock button on the lens.
Using the B (Green) Mode
Lets you capture images with fully automatic settings.
In B mode, pictures are taken with the following settings.
• Program Line
• File Format
• Sensitivity
• Metering Method j (AUTO)
JPEG
AUTO
L (Multi-segment Metering)
• AF Point S (Auto)
• AUTO AF Point Setting 11 AF Points
• White Balance
• Custom Image
F
Bright
(Auto)
• High-ISO NR Auto
• Slow Shutter Speed NR Auto
• Shake Reduction
• Color Space k (On) sRGB
If the 3 button is pressed in 9 mode, the menu for Green Mode appears.
You cannot select items that cannot be changed.
1
Set the mode dial to B.
4
103
104
4
• In B mode, the following functions are not available.
• Changing the shutter speed
• Changing the aperture value
• EV Compensation
• Flash (Flash On, Slow-speed
Sync, Exposure Compensation)
• Continuous Shooting
• Focus Mode k (l is selected)
• D-Range Setting
• Lens Correction
• Exposure Bracketing
• Mirror Lock-up shooting
• Multi-exposure
• Interval Shooting
• Extended Bracketing
• Digital Filter
• HDR Capture
• Cross Processing
• Horizon Correction
• Saving as A mode
• L and |/Y button operations
• Button Customization (default settings are used)
• Custom menu settings (default settings are used)
• The control panel cannot be displayed in B mode.
Using the e (Hyper-program) Mode
Automatically sets the shutter speed and aperture value to obtain a proper exposure according to Program Line when taking pictures.
You can also use the front and rear e-dials to change the shutter speed
and aperture value while maintaining the proper exposure. (p.282)
1
Set the mode dial to e.
2
Confirm the shutter speed and aperture value.
Confirm the settings using the status screen, viewfinder or LCD panel.
P
1/ 125
ISO
AUTO
100
AF.S
F 5.6
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
105
• Set the Program Line to use in [Program Line] of the [A Rec. Mode 3] menu.
• Turn the rear e-dial (S) while pressing the m button to change the EV
• The proper exposure may not be obtained with the selected shutter speed
and aperture value when the sensitivity is not set to [AUTO] (p.95).
4
Using the K (Sensitivity Priority) Mode
You can set the sensitivity to suit the brightness of the subject.
The shutter speed and aperture value are automatically set according to the selected sensitivity to obtain a proper exposure.
1
Set the mode dial to K.
106
2
Turn the rear e-dial (S) to adjust the sensitivity.
4
The set values are displayed in the status screen and viewfinder and on the LCD panel.
Sv
1/ 30
ISO 100
AF.S
F 4.5
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
• You can set the sensitivity to a value equivalent to ISO 100 to 12800. [AUTO] is not available.
• Turn the rear e-dial (S) while pressing the m button to change the EV
• The sensitivity can be set in increments of 1/3 EV or 1/2 EV. Set the exposure
steps in [1. EV Steps] of the [A Custom Setting 1] menu. (p.120)
Using the b (Shutter Priority) Mode
Lets you set the desired shutter speed for expressing moving subjects.
When taking pictures of a fast moving subject, you can increase the shutter speed to make the subject look still or decrease the shutter speed to have the subject show movement.
The aperture value is automatically set to give a proper exposure depending on the shutter speed.
1
Effect of Aperture and Shutter Speed (p.93)
1
Set the mode dial to b.
107
4
2
Turn the front e-dial (R) to adjust the shutter speed.
The shutter speed can be set within the range of 1/8000 to 30 seconds.
The set values are displayed in the status screen and viewfinder and on the LCD panel.
Tv
1/ 125
ISO
AUTO
400
AF.S
F 5.6
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
108
• Turn the rear e-dial (S) while pressing the m button to change the EV
• The shutter speed can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [A Custom Setting 1] menu. (p.120)
• The proper exposure may not be obtained with the selected shutter speed
when the sensitivity is not set to [AUTO] (p.95).
4
Exposure Warning
If the subject is too bright or too dark, the aperture value will blink on the status screen and LCD panel and in the viewfinder. If the subject is too bright, choose a faster shutter speed. If it is too dark, choose a slower shutter speed. When the aperture value indication stops blinking, you can take a picture with proper exposure.
Use a commercially available ND (Neutral Density) Filter if the subject is too bright. Use a flash if it is too dark.
Using the c (Aperture Priority) Mode
Set the aperture value for controlling the depth of field. The depth of field is deeper and the front and back of the focused object is clear when the aperture is set to a large value, small lens opening. The depth of field is shallower and the front and back of the focused object is blurred when the aperture is set to a small value, large lens opening.
The shutter speed is automatically set to the proper exposure depending on the aperture value.
1
Effect of Aperture and Shutter Speed (p.93)
1
Set the mode dial to c.
109
4
2
Turn the rear e-dial (S) to adjust the aperture value.
The set values are displayed in the status screen and viewfinder and on the LCD panel.
Av
1/ 30
ISO
AUTO
400
AF.S
F 4.5
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
110
• Turn the rear e-dial (S) while pressing the m button to change the EV
• The aperture value can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [A Custom Setting 1] menu. (p.120)
• The proper exposure may not be obtained with the selected aperture value
when the sensitivity is not set to [AUTO] (p.95).
4
Exposure Warning
If the subject is too bright or too dark, the shutter speed will blink on the status screen and LCD panel and in the viewfinder. When the subject is too bright, set the aperture to a smaller lens opening (larger number), and when too dark, set the aperture to a larger lens opening (smaller number). Once blinking stops, you can take a picture with proper exposure.
Use a commercially available ND (Neutral Density) Filter if the subject is too bright. Use a flash if it is too dark.
Using the L (Shutter & Aperture Priority) Mode
You can set both the desired shutter speed and aperture to take the picture.
Automatically sets the sensitivity so that the manually set shutter speed and aperture value will give the proper exposure according to the brightness of the subject.
1
Set the mode dial to L.
2
Turn the front e-dial (R) to adjust the shutter speed.
The shutter speed can be set within the range of 1/8000 to 30 seconds.
3
Turn the rear e-dial (S) to adjust the aperture value.
The set values are displayed in the status screen and viewfinder and on the LCD panel.
TAv
1/ 1000
ISO
AUTO
100
AF.S
F 4.5
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
• Turn the rear e-dial (S) while pressing the m button to change the EV
• The shutter speed and aperture value can be set in increments of 1/3 EV or
1/2 EV. Set the exposure steps in [1. EV Steps] of the [A Custom Setting 1]
• In L mode, the sensitivity is fixed to [AUTO].
4
111
112
Exposure Warning
If the subject is too bright or too dark, the sensitivity will blink on the status screen and LCD panel and in the viewfinder. In such situations, change the shutter speed and aperture. When the indication stops blinking, you can take a picture with proper exposure.
Use a commercially available ND (Neutral Density) Filter if the subject is too bright. Use a flash if it is too dark.
4
Using the a (Hyper-manual) Mode
You can set the shutter speed and aperture value. This mode is suitable to take pictures of your choice by combining them. This mode is convenient for taking pictures using the same combination of the shutter speed and aperture settings or taking intentionally underexposed (darker) or overexposed (brighter) photographs.
1
Effect of Aperture and Shutter Speed (p.93)
1
Set the mode dial to a.
2
Press the | button.
The shutter speed and aperture value are automatically switched to obtain a proper exposure.
3
Turn the front e-dial (R) to adjust the shutter speed.
The shutter speed can be set within the range of 1/8000 to 30 seconds.
4
Turn the rear e-dial (S) to adjust the aperture value.
The set values are displayed in the status screen and viewfinder and on the LCD panel.
M
1/ 125
ISO 100
AF.S
F 5.6
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
While adjusting the shutter speed or aperture value, the difference from the proper exposure (EV value) is displayed in a bar graph. The proper exposure is set
Difference from the proper exposure when V is in the middle of the EV bar. If it is towards -, it is underexposed. If it is towards +, it is overexposed. If the value exceeds the range of the EV bar (±5.0), or if the subject is too bright or too dark, the “+” or “-” blinks.
4
113
114
• The sensitivity cannot be set to [AUTO] in a mode. When the sensitivity is set to [AUTO] and the exposure mode is changed to a mode, the sensitivity
is also changed to the lowest value set in “Setting the Range of Automatic
Sensitivity Correction” (p.96).
• The shutter speed and aperture value can be set in increments of 1/3 EV or
1/2 EV. Set the exposure steps in [1. EV Steps] of the [A Custom Setting 1]
• Since the bar graphs in the viewfinder and on the LCD panel display the amount of camera tilt to the left or right, the difference from the proper exposure is displayed as a number when [Electronic Level] is set to O (On).
4
Combining with L
When the exposure is locked (p.121) by pressing the L button in
a mode, if the shutter speed or aperture value is changed, the combination of shutter speed and aperture value changes while the exposure value is retained.
Example:If the shutter speed is 1/125 sec. and aperture is F5.6 and these settings are locked with the L button, the aperture automatically changes to F11 if the shutter speed is changed to 1/30 sec. with the front e-dial (R).
Using the p (Bulb) Mode
This setting is useful when shooting night scenes and fireworks which require long exposures.
1
Set the mode dial to p.
115
B
Bulb
ISO 100
AF.S
F 5.6
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
2
Press the shutter release button.
The shutter remains open as long as the shutter release button is kept pressed.
4
The following functions are not available in p mode.
- EV Compensation
- Exposure Bracketing
- Continuous Shooting
- Interval Shooting
- HDR Capture
116
4
• The aperture value can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [A Custom Setting 1] menu. (p.120)
• The Shake Reduction function is automatically turned off when the exposure mode is set to p mode.
• Use a sturdy tripod and the cable switch CS-205 (optional) or Remote Control
(optional) to prevent camera shake when using p mode. Connect the cable
switch to the cable release terminal (p.19).
• When using the remote control, set whether to start exposure with a press and stop it with another press of the shutter release button on the remote control, or to keep the shutter open as long as the release button on the
remote control is kept pressed. Set in [19. Remote Control in Bulb] of the
[A Custom Setting 3] menu (p.92).
• The sensitivity cannot be set to [AUTO] in p mode. When the sensitivity is set to [AUTO] and the exposure mode is changed to p mode, the sensitivity
is also changed to the lowest value set in “Setting the Range of Automatic
Sensitivity Correction” (p.96).
• When the exposure mode is set to p, the upper sensitivity limit is ISO 1600.
• There is no limit on exposure time for Bulb shooting. However, we recommend the use of the AC adapter kit K-AC50 (optional) when shooting with a long exposure setting as the battery is being drained while the shutter
Using the M (Flash X-Sync Speed) Mode
The shutter speed is locked at 1/180 second. Use this when using an external flash that does not automatically set the sync speed.
1
Set the mode dial to M.
X
1/ 180
ISO 100
AF.S
F 5.6
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
• Turn the rear e-dial (S) to adjust the aperture value.
• Press the | button to retain the shutter speed at 1/180 second and automatically adjust the aperture value.
• The sensitivity cannot be set to [AUTO] in M mode. When the sensitivity is set to [AUTO] and the exposure mode is changed to M mode, the sensitivity
is also changed to the lowest value set in “Setting the Range of Automatic
Sensitivity Correction” (p.96).
117
Selecting the Metering Method
Choose the part of the viewfinder to use for measuring brightness and determining exposure. The following three methods are available. The factory default setting is L (Multi-segment metering).
1
Turn the metering mode switching lever.
The set metering method is displayed in the status screen and viewfinder.
4
L Multi-segmented Metering
The scene in the viewfinder is metered in 77 different zones. Even in backlit locations, this mode automatically determines what level of brightness is in which portion and automatically adjusts exposure.
Center-weighted metering mode is automatically set even if you select multisegment metering mode when using a lens other than a DA, DA L, D FA, FA J,
FA, F or A lens, or when the lens aperture ring is set to a position other than s
(Auto). (Can only be used if [27. Using Aperture Ring] (p.339) in the [A Custom
Setting 4] menu is set to [Permitted].)
118
Linking AE to AF Point during Multi-segment
Metering
In [6. Link AE to AF Point] of the [A Custom Setting 1] menu (p.91),
you can link the exposure and AF point in the focusing area during multi-segment metering.
1 Off Exposure is set separately from the AF point. (default setting)
2 On Exposure is set in accordance with the AF point.
4
M Center-weighted Metering
Metering is weighted at the center of the viewfinder. Use this metering when you want to compensate for the exposure by experience, instead of leaving it to the camera. The illustration shows that sensitivity increases as the pattern height increases (center). This mode does not automatically compensate for backlit scenes.
N Spot Metering
The brightness is measured only within a limited area at the center of the viewfinder.
You can use this in combination with the AE
Lock (p.121) when the subject is extremely
small and the correct exposure is difficult to obtain.
Setting the Meter Operating Time
You can set the exposure metering time to [10 sec.] (default setting),
[3 sec.] or [30 sec.] in [4. Meter Operating Time] of the [A Custom
Adjusting Exposure
This allows you to deliberately overexpose (brighten) or underexpose
(darken) your picture.
The exposure steps can be selected from 1/3 EV or 1/2 EV in [1. EV Steps]
of the [A Custom Setting 1] menu. You can adjust the EV compensation value from -5 to +5 (EV).
1
Turn the rear e-dial (S) while
pressing the m button.
The exposure is adjusted.
4
119 m is displayed in the status screen and viewfinder and on the LCD panel during adjustment.
P
1/ 100
ISO 100
AF.S
F 5.6
Compensation value
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
±0EV
Press the m button to check the compensation value after adjustment.
Press the | button to reset the EV compensation value to 0.0.
EV compensation is not available when the exposure mode is set to
B (Green) or p (Bulb) mode.
• The compensation value can also be changed by pressing the m button once, taking your finger off the button and turning the rear e-dial (S). In this case, EV compensation is set when the m button is pressed again or the
exposure metering timer (p.118) elapses.
• The compensation value is not canceled by turning the camera off or by switching to another exposure mode.
120
EV Compensation for a and M modes
For example, if the EV compensation value is set to +1.5 for a
(Hyper-manual) and M (Flash X-sync speed) modes, an underexposure of 1.5 EV is displayed on the EV bar. If you set the exposure value so that the V is displayed at the center of the EV bar, the image will be captured with the compensated value.
4
Changing the Exposure Steps
Set the exposure compensation steps to
increments of 1/3 EV or 1/2 EV in [1. EV
Steps] of the [A Custom Setting 1] menu
1.
EV Steps
1
2
1/3 EV Steps
1/2 EV Steps
Exposure compensation steps now set to 1/3 EV
Step Interval
1/3 EV
1/2 EV
MENU Cancel OK OK
Exposure Setting Value
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0, ±3.3, ±3.7,
±4.0, ±4.3, ±4.7, ±5.0
±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0, ±3.5, ±4.0, ±4.5, ±5.0
Locking the Exposure Before Shooting (AE Lock)
AE Lock is a function that locks the exposure prior to taking a picture. Use this when the subject is too small or is backlit and a proper exposure setting cannot be obtained.
1
Set the exposure and press the
L button.
The camera locks the exposure
(brightness) at that instant.
@ is displayed in the status screen and viewfinder while the AE Lock is engaged.
4
121
• The exposure remains locked as long as the L button is kept pressed or the shutter release button is kept pressed halfway. The exposure remains
locked for twice the amount of the exposure metering timer (p.118) even after
taking your finger off the L button.
• You will hear a beep when the L button is pressed. The beep can be
• AE Lock is not available in B (Green), p (Bulb) or M (Flash X-sync Speed) mode.
• When any of the following operations are performed, AE Lock is canceled.
- the L button is pressed again
- the Q button, 3 button or M button is pressed
- the mode dial is turned
- the lens is changed
- a lens with an s (Auto) position is set to a position other than the s position
• The combination of shutter speed and aperture value changes depending on the zooming position even while the AE Lock is engaged when using a zoom lens whose maximum aperture value varies depending on the focal length.
However, the exposure value does not change and a picture is taken at a brightness level set when the AE Lock is activated.
• The exposure can also be locked when the focus is locked. Set in [5. AE-L
with AF Locked] of the [A Custom Setting 1] menu. (p.131)
Changing the Exposure Automatically when Shooting
Auto Bracketing is a function for continuously shooting images with the exposure automatically adjusted for underexposure and overexposure. Each time the shutter release button is pressed, 2, 3
or 5 shots are taken. Refer to “Shooting while Adjusting the Settings
122
Focusing
You can focus with the following methods.
= Autofocus
The camera automatically focuses on the subject when the shutter release button is pressed halfway.
\ Manual focus Manually adjust the focus.
Using the Autofocus
4
You can also choose the autofocus mode from l (Single mode) where the shutter release button is pressed halfway to focus on the subject and the focus is locked at that position, and k (Continuous mode) where the subject is kept in focus by continuous adjustment while the shutter release button is pressed halfway. The factory default setting is l.
1
Turn the focus mode lever to l
or A.
123 l
Single mode
When the shutter release button is pressed halfway and the subject comes into focus, the focus is locked (focus lock) at that position. To focus on another subject, take your finger off the shutter release button first, then press the shutter release button halfway again.
• The AF assist light turns on as necessary. (p.124)
• Set the action priority for when the shutter release button is
pressed fully in [15. AF.S Setting] of the [A Custom Setting 3] menu (p.92).
1
2
Focuspriority
Releasepriority
The shutter cannot be released until the subject is in focus. (default setting)
If the subject is too close to the camera, move back and take the picture. If the
subject is difficult to focus (p.75), adjust the
The shutter can be released even if the subject is not in focus.
k
Continuous mode
The subject is kept in focus by continuous adjustment while the shutter release button is pressed halfway. The focus indicator
] appears and you will hear a beep when the subject comes into focus. Even if the subject is not in focus, the shutter can be released when the shutter release button is pressed fully.
• When the shutter release button is pressed halfway to focus, the camera automatically tracks the subject if it is determined to be a moving object. The lens will automatically operate and continuously focus on the subject.
• Set the action priority for Continuous Shooting in [16. AF.C
Setting] of the [A Custom Setting 3] menu (p.92).
1 Focus-priority
2 FPS-priority
Takes pictures giving priority to keeping the subject in focus during Continuous
Shooting. (default setting)
Takes pictures giving priority to the shooting speed during Continuous
Shooting.
4
124
2
Look through the viewfinder and press the shutter release button halfway.
4
The focus indicator ] appears and you will hear a beep when the subject comes into focus. (When blinking, the subject is not in focus.)
1
Subjects that are difficult to focus on
Focus indicator
AF Assist Light
You can set whether or not to use the AF assist light during l mode
in [17. AF Assist Light] of the [A Custom Setting 3] menu (p.92).
1 On
To make focusing easier when the subject is in a dark location, the AF assist light turns on when the shutter release button is pressed halfway. (default setting)
2 Off The AF assist light will not be used.
Using the = Button to Focus on the Subject
You can set the camera so that focusing is performed when the = button is pressed.
1
Select [Button Customization] in the [A Rec. Mode 5]
menu and press the four-way controller (5).
The [Button Customization] screen appears.
2
Use the four-way controller (23) to select [AF Button]
and press the four-way controller (5).
The [AF Button] screen appears.
3
Press the four-way controller (5) and use the four-way controller
(23) to select [Enable AF].
AF Button
Enable AF
Cancel AF
AF is performed when the AF button is pressed
MENU Cancel OK OK
Enable AF
Cancel AF
Autofocus is performed by using the = button or the shutter release button. (default setting)
\ appears in the viewfinder while the = button is pressed. Autofocus is not performed when the shutter release button is pressed. (Take your finger off the = button to return to normal autofocus mode.)
4
Press the 4 button.
5
Press the 3 button three times.
The camera is ready to take a picture.
6
Press the = button while looking through the viewfinder.
Autofocus is performed.
125
4 l
Single mode k
Continuous mode
When the = button is pressed and the subject comes into focus, the Focus Lock function is activated while the button is pressed.
The subject is kept in focus while the = button is pressed.
7
Press the shutter release button.
When [Enable AF] is assigned to [Shutter Button Half Press] in [Button
Customization], press the shutter release button while holding down the
= button.
The picture is taken.
126
AF Fine Adjustment
4
You can adjust the AF focusing position.
• Be sure to use [AF Fine Adjustment] only when necessary. Care should be taken as adjusting the autofocus may make it difficult to capture images with the appropriate focus.
• Any camera shake during test shooting may make it difficult to obtain the accurate focusing position. Therefore, always use a tripod when taking test shots.
1
Select [26. AF Fine Adjustment] in the [A Custom Setting
4] menu and press the four-way controller (5).
2
Use the four-way controller (23) to select [On] and press
the four-way controller (5).
The [26. AF Fine Adjustment] screen appears.
3
Use the four-way controller (23) to select [Apply All] or
[Apply One].
Apply All Applies the same adjustment value to all lenses.
Apply One
This item will appear on the display only when the lens ID is obtained. Saves and applies a different adjustment value for each lens type. (Up to 20 lens types)
Reset Resets the saved adjustment value.
4
Press the four-way controller (5) and adjust the value with the rear
e-dial (S) or the four-way
controller (45).
26. AF Fine Adjustment
Apply All
Apply One
+5
Unset
Reset
MENU Cancel ±0 OK OK
Available operations
Four-way controller (5)/
Rear e-dial (S) to the right (y)
Four-way controller (4)/
Rear e-dial (S) to the left (f)
| button
Adjusts the focus to a closer position.
Adjusts the focus to a farther position.
Resets the adjustment value to ±0.
5
Press the 4 button.
The adjustment value is saved.
6
Press the 3 button three times.
The camera returns to Capture mode.
7
Take a test picture.
You can easily check the focusing point by enlarging the image during
Digital Preview (p.138) or Live View (p.165).
Even when an adjustment value has been saved using [Apply One], if you press the 4 button with [Apply All] selected in Step 3, the [Apply All] value is used instead of the [Apply One] value.
127
4
Selecting the Focusing Area (AF Point)
Choose the part of the viewfinder to set focus to. The factory default setting is S (Auto).
Selected AF point(s) light red in the viewfinder (Superimpose AF Area).
U Center jSelect
S Auto
Sets the focusing area to the center of the viewfinder.
Sets the focusing area to the user selected point from eleven points in the AF frame.
The camera selects the optimum AF point even if the subject is not centered. You can select from 11 AF points (default setting) or 5 points in [AUTO AF Point Setting] in the [A Rec.
Mode 1] menu.
1
Turn the AF point switching dial.
128
• AF point(s) are not illuminated red in the viewfinder when [Off] is selected for
[14. Superimpose AF Area] in the [A Custom Setting 2] menu (p.91).
• The focusing area is fixed to U regardless of this setting when using lenses
other than DA, DA L, D FA, FA J, FA or F lens. (p.337)
4
Setting the Focus Position in the Viewfinder
1
Set the AF point switching dial to j .
V appears in the viewfinder and the AF point can be changed.
2
Look through the viewfinder and check the position of the subject.
3
Use the four-way controller
(2345) to change the AF point.
The selected AF point appears in the status screen.
P AF.S
1/ 2000 F 2.8
ISO
AUTO
1600
±0.0
±0±0
-5 4 3 2 1 1 2 3 4 +5
AWB
JPEG 16
M
[ 37 ]
Available operations
4 button Returns the AF point to the center of the AF frame.
Press and hold 4 button Disables changing the AF point and enables direct key operation of the four-way controller
(2345). To enable changing the AF point, press the 4 button while direct key operation is enabled. You will hear a beep when switching between enabled and disabled.
129
The AF point(s) light red in the viewfinder
(Superimpose AF Area) and you can check where you set the AF point.
4
• The position of the changed AF point is stored even if the camera is turned off or the focusing area is switched to U or S.
• V appears in the viewfinder when the AF point can be changed.
• When any of the following operations are performed, changing of the AF point (in Step 3) is canceled.
- the main switch is turned off
- the mode dial is turned
- the AF point switching dial is turned
- the Q button, 3 button, M button or U button is pressed
130
4
Locking the Focus (Focus Lock)
If the subject is outside the range of the focusing area, the camera cannot automatically focus on the subject. In this case, focus the camera on the subject in the focusing area, lock the focus at that position (Focus Lock), and then recompose your picture.
1
Set the focus mode lever to l.
2
Frame the desired composition for your picture in the viewfinder.
Example) The person is out of focus and the background is focused instead.
3
Center the subject to focus in the viewfinder and press the shutter release button halfway.
The focus indicator ] appears and you will hear a beep when the subject comes into focus. (When blinking, the subject is not in focus.)
4
Lock the focus.
Keep the shutter release button pressed halfway. The focus will remain locked.
5
Recompose the picture while keeping the shutter release button pressed halfway.
• The focus is locked while the focus indicator ] is displayed.
• Turning the zoom ring with the focus locked may cause the subject to be out of focus.
• The beep that sounds when the image is focused can be turned off. (p.288)
4
Locking Exposure when the Focus is Locked
Set [5. AE-L with AF Locked] in the
[A Custom Setting 1] menu (p.91) to
lock the exposure value while the focus is locked.
5.
AE-L with AF Locked
1
2
Off
On
AE is locked when the focus is locked
MENU Cancel OK OK
1 Off Exposure is not locked when the focus is locked. (default setting)
2 On Exposure is locked when the focus is locked.
131
132
Adjusting the Focus Manually (Manual Focus)
When you adjust the focus manually, you can use either the focus indicator or the matte field in the viewfinder.
4
Using the Focus Indicator
The focus indicator ] appears in the viewfinder when the subject is in focus even during manual focus.
You can manually adjust the focus using the focus indicator ].
1
Set the focus mode lever to \.
2
Look through the viewfinder, press the shutter release button halfway and turn the focusing ring.
The focus indicator ] appears and you will hear a beep when the subject comes into focus.
Focus indicator
• Adjust the focus manually using the matte field in the viewfinder when the
subject is difficult to focus (p.75) and the focus indicator will not appear.
• The beep that sounds when the image is focused can be turned off. (p.288)
4
Using the Viewfinder Matte Field
You can manually adjust the focus using the matte field in viewfinder.
1
Set the focus mode lever to \.
133
2
Look through the viewfinder and turn the focusing ring until the subject is clearly visible in the viewfinder.
134
4
Shooting in Catch-in Focus Mode
When [25. Catch-in Focus] in the [A Custom Setting 4] menu (p.92)
is set to [On], if the focus mode is set to l and one of the following types of lenses is attached, catch-in focus shooting is enabled and the shutter is released automatically when the subject comes into focus.
• Manual focus lens
• DA or FA lens that has a = and \ setting on the lens (the setting on the lens must be set to \ before shooting)
How to Take Pictures
1 Attach a proper lens to the camera.
2 Set the focus mode lever to l.
3 Set the focus on a position the subject will pass.
4 Press the shutter release button fully.
The shutter is released automatically when the subject comes into focus at the set position.
Checking the Composition, Exposure and Focus Before Shooting (Preview)
135
You can use the preview function to check depth of field, composition, exposure and focus before taking a picture.
There are two preview methods.
Preview Method
| Optical Preview e Digital Preview
Description
For checking the depth of field with the viewfinder.
For checking the composition, exposure and focus on the monitor.
You can also use the Live View function to display a real-time image on the monitor and change the shooting function settings during display and check the
settings by enlarging the image. Refer to p.165 for details.
4
Selecting the Preview Method
Choose whether to use Optical Preview or Digital Preview when the main switch is turned to the preview position (|).
The default setting is Optical Preview.
1
Select [Button Customization] in the [A Rec. Mode 5]
menu and press the four-way controller (5).
The [Button Customization] screen appears.
2
Use the four-way controller (23) to select [Preview Dial]
and press the four-way controller (5).
The [Preview Dial] screen appears.
3
Press the four-way controller (5) and use the four-way controller
(23) to select [Optical Preview] or [Digital Preview].
Preview Dial
Optical Preview
Digital Preview
For checking depth of field with viewfinder
MENU Cancel OK OK
136
4
Press the 4 button.
5
Press the 3 button three times.
The camera is ready to take a picture.
• While shooting with Interval Shooting, Multi-exposure or Live View, Optical
Preview is used regardless of the setting.
• Digital Preview can also be assigned to the |/Y button. If Optical
Preview is assigned to the Preview dial and Digital Preview is assigned to the
|/Y button, you can use both preview functions easily. Refer to p.285
for assigning a function to the |/Y button.
4
Setting the Display for Digital Preview
For Digital Preview, you can set whether to display the histogram and
Bright/Dark Area warning, and whether to enable enlarging images.
1
Select [Digital Preview] in the [A Rec. Mode 5] menu and
press the four-way controller (5).
The [Digital Preview] screen appears.
2
Use the four-way controller
(23) to select [Histogram],
[Bright/Dark Area] or [Enlarge
Instant Review].
Digital Preview
Histogram
Bright/Dark Area
Enlarge Instant Review
MENU
3
Use the four-way controller (45) to select O or P.
4
Press the 3 button twice.
Displaying the Optical Preview
1
Position the subject inside the AF frame and press the shutter release button halfway to focus on the subject.
2
Turn the main switch to | while looking through the viewfinder.
You can check the depth of field in the viewfinder while the main switch is set to the position | .
During this time, no shooting information is displayed in the viewfinder, and the shutter cannot be released.
3
Take your finger off the main switch.
Optical Preview is ended and the camera is ready to take a picture.
4
137
138
Displaying the Digital Preview
1
Focus on the subject, then compose the picture in the viewfinder and turn the main
switch to |.
4
When Digital Preview is assigned to the
|/Y button, press the |/Y button.
The icon (|) appears on the monitor during preview and you can check the composition, exposure and focus.
AE.L
Available operations
Rear e-dial (S)
L button
Enlarges the preview image. (p.237)
Saves the preview image. Select [Save as] and press the 4 button.
2
Press the shutter release button halfway.
Digital Preview is ended and the autofocus system operates.
The maximum display time for Digital Preview is 60 seconds.
Using the Shake Reduction Function to Prevent Camera Shake
139
Using the Shake Reduction Function
The Shake Reduction function reduces camera shake that occurs when the shutter release button is pressed. This is useful for taking pictures in situations where camera shake is likely to occur. The Shake Reduction function allows you to take pictures at approximately 4 steps slower shutter speed without a risk of the camera shake.
The Shake Reduction function is ideal when taking pictures in the following situations.
• When taking pictures in dimly lit locations, such as indoors, at night, on cloudy days and in the shade
• When taking telephoto pictures
Blurred picture
Picture taken with the Shake
Reduction function
4
The Shake Reduction function can be used to reduce horizontal and vertical camera shake or keep the image level.
• The Shake Reduction function does not compensate for blurring caused by subject movement. To take pictures of a moving subject, increase the shutter speed.
• The Shake Reduction function may not fully reduce camera shake when taking close-up shots. In this case, it is recommended to turn off the Shake
Reduction function and use the camera with a tripod.
• The Shake Reduction function will not fully work when shooting with a very slow shutter speed, for example when panning or shooting night scenes. In this case, it is recommended to turn off the Shake Reduction function and use the camera with a tripod.
140
4
Reducing Vertical and Horizontal Camera Shake
1
Select [Shake Reduction] in the [A Rec. Mode 4] menu
and press the four-way controller (5).
2
Use the four-way controller (23) to select k or l and press
the 4 button.
1 2 3 4 5
Movie
Live View
Electronic Level
Horizon Correction
Shake Reduction
Input Focal Length k
Uses Shake Reduction. (default setting) l Does not use Shake Reduction.
3
Press the 3 button.
MENU Cancel OK OK
The screen that was displayed before selecting the menu appears again.
4
Aim the camera at the subject and press the shutter release button halfway.
k appears in the viewfinder and the
Shake Reduction function is activated.
Correcting the Tilt of the Images
When an image is tilted, it can be corrected up to a maximum of ±2 degrees.
1
Select [Horizon Correction] in the [A Rec. Mode 4] menu.
2
Use the four-way controller
(45) to select O or P.
1 2 3 4 5
Movie
Live View
Electronic Level
Horizon Correction
Shake Reduction
Input Focal Length 35mm
MENU Exit
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
4
Aim the camera at the subject and press the shutter release button halfway.
The following indicators appear on the status screen.
q Shake Reduction On + Horizon Correction On r Shake Reduction Off + Horizon Correction On
141
• Set [Shake Reduction] to l (Off) when using the camera with a tripod or when this function is not needed.
• The Shake Reduction function automatically turns off in the following situations. Note that the Shake Reduction function cannot be selected when the following functions are set.
- p (Bulb) mode
- Self-timer shooting
- Remote Control shooting
- Mirror Lock-up shooting
- when [Auto Align] is set to P (Off) in the [HDR Capture] setting
- when using the flash in wireless mode
4
• The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the
Shake Reduction function to become stable, and then press the shutter button gently. If k appears in the viewfinder when you press the shutter release button halfway, the camera is ready to take a picture.
• The Shake Reduction function is available with any X compatible
PENTAX lens. However, when the aperture ring is set to a position other than the s (Auto) position for a lens with a s position or a lens without an s
position is used, the camera will not operate unless [27. Using Aperture Ring]
is set to [Permitted] in the [A Custom Setting 4] menu. Set this beforehand.
In such cases, however, some functions will be restricted. Refer to “Notes on
[27. Using Aperture Ring]” (p.339) for details.
142
When the Focal Length Cannot Be Automatically Detected
The Shake Reduction function operates by obtaining the lens information such as focal length.
If the camera uses a DA, DA L, D FA, FA J, FA or F lens, the lens information is automatically obtained when the Shake Reduction function is activated.
If you use a lens whose information such as focal length cannot be
automatically obtained (p.337), the [Input Focal Length] setting screen
appears when the camera is turned on with the Shake Reduction function set to k (On).
Set the focal length manually in the [Input Focal Length] setting screen.
4
• The [Input Focal Length] setting screen does not appear when using a lens whose information such as focal length can be automatically obtained.
• When using a lens without the s position on the aperture or with the aperture
set to a position other than s, set [27. Using Aperture Ring] in the [A Custom
Setting 4] menu to [Permitted]. (p.339)
• The effect of Shake Reduction is influenced by the shooting distance as well as focal length information. The Shake Reduction function may not work as effectively as expected when shooting at close ranges.
1
Use the four-way controller
(45) or the rear e-dial (S) to set the focal length.
Select from the following 34 focal length values. (The default setting is 35 mm.)
8 10 12 15 18 20 24 28 30 35
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
Input Focal Length
100
120
135
MENU Cancel OK OK
• If the focal length for your lens is not listed above, select the value closest to the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
• When using a zoom lens, select the actual focal length at the zoom setting being used in the same manner.
2
Press the 4 button.
The camera is ready to take a picture.
To change the focal length setting, use [Input Focal Length] in the [A Rec.
143
Shooting with Self-timer
This camera has the following two types of self-timers.
g
Z
Self-timer
(12 sec.)
Self-timer
(2 sec.)
Shutter is released after about 12 seconds. Use this mode to include the photographer in the picture.
A mirror pops up immediately after the shutter release button is pressed. The shutter is released after about 2 seconds. Use this mode to avoid camera shake when the shutter release button is pressed.
1
Mount the camera onto a tripod.
4
2
Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
3
Use the four-way controller (45) to select g.
4
Press the four-way controller (3) and use the four-way controller
(45) to select g or Z.
Drive Mode
Self-timer (12 sec.)
MUP
5
Press the 4 button.
The camera is ready to take a picture.
MENU Cancel OK OK
144
4
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
7
Press the shutter release button fully.
For g, the front and back self-timer lamps start blinking slowly and blink rapidly 2 seconds before the shutter is released.
The beep is heard and the rate increases.
The shutter will be released about 12 seconds after the shutter release button is pressed fully.
For Z, the shutter will be released about
2 seconds after the shutter release button is pressed fully.
• Select a mode other than g or Z in the [Drive Mode] screen to cancel the
Self-timer shooting. The setting is canceled when the camera is turned off if
[Drive Mode] is set to P (Off) in [Memory] (p.312) of the [A Rec. Mode 5]
menu.
• The Shake Reduction function is automatically turned off when g or Z is set.
• You can set the camera so that the beep does not sound. (p.288)
• The exposure may be affected if light enters the viewfinder. Use the AE Lock
function (p.121) or attach the provided ME viewfinder cap. The light entering
the viewfinder has no effect on the exposure when the exposure mode is set to a (Manual).
145
Removing the Eyecup F
R
Attaching the ME Viewfinder cap
Shooting with Remote Control (Optional)
The shutter can be released from a distance by using the optional remote
You can select from the following three settings for Remote Control shooting.
h i i
Remote Control
Remote Control
(3s delay)
Remote
Continuous
Shooting
The shutter is released immediately after the shutter release button on the remote control unit is pressed.
The shutter is released about 3 seconds after the shutter release button on the remote control unit is pressed.
Continuous shooting starts when the shutter release button on the remote control unit is pressed. Press the shutter release button on the remote control unit again to exit continuous shooting.
4
146
1
Mount the camera onto a tripod.
4
2
Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
3
Use the four-way controller (45) to select h.
4
Press the four-way controller (3) and use the four-way controller
(45) to select h, i, or i.
Drive Mode
Remote Control
MUP
W appears on the LCD panel. The selftimer lamp will blink and the camera is in a stand-by status.
MENU Cancel OK OK
5
Press the 4 button.
The camera is ready to take a picture.
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
7
Point the remote control unit towards the remote control receiver on the front or back of the camera and press the shutter release button on the remote control.
The operating distance of the remote control unit is approximately 4 m from the front of the camera and approximately 2 m from the back of the camera.
After a picture is taken, the self-timer lamp lights for 2 seconds and then returns to blinking.
Approx.
4 m
147
Approx.
2 m
4
148
4
• By default, you cannot adjust the focus with the remote control unit. Focus on the subject first with the camera before operating with the remote control.
cannot be used with the remote control unit during Live View.)
• When using the Remote Control Waterproof O-RC1, AF can be operated with the S button. The { button cannot be used.
• Select a mode other than h, i or i in the [Drive Mode] screen to cancel the Remote Control shooting. The setting is canceled when the camera is
turned off if [Drive Mode] is set to P (Off) in [Memory] (p.312) of the [A Rec.
Mode 5] menu.
• The Shake Reduction function is automatically turned off when h, i or i is set.
• The exposure may be affected if light enters the viewfinder. Use the AE Lock
function (p.121) or attach the provided ME viewfinder cap. The light entering
the viewfinder has no effect on the exposure when the exposure mode is set to a (Manual).
Removing the Eyecup F
R
Attaching the
ME Viewfinder cap
• The remote control may not operate in backlit conditions.
• The Remote Control F can send a remote control signal about 30,000 times.
Contact a PENTAX Service Center to replace the battery (this will involve a fee).
Shooting with the Mirror Lock-up Function
Use the Mirror Lock-up function if camera shake is evident even when the remote control or cable switch is used with a tripod.
For Mirror Lock-up Shooting, press the shutter release button to raise the mirror up and press it again to release the shutter.
The following two types of Mirror Lock-up shooting are available.
d Mirror Up e
Mirror Up
Remote Control
Mirror Lock-up shooting with the shutter release button.
Mirror Lock-up shooting with the remote control. The shutter will be released immediately after the shutter release button on the remote control unit is pressed
1
Mount the camera onto a tripod.
4
149
2
Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
3
Use the four-way controller (45) to select d.
4
Press the four-way controller (3) and use the four-way controller
(45) to select d or e.
Drive Mode
Mirror Lock-up Shooting
MUP
MUP d appears in the status screen and on the LCD panel.
MENU Cancel OK OK
150
4
5
Press the 4 button.
The camera is ready to take a picture.
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
7
Press the shutter release button fully.
The mirror pops up and you will hear a beep. The AE Lock function is enabled with the exposure value set immediately before the mirror pops up.
8
Press the shutter release button fully again.
The shutter is released and the picture is taken.
• Select a mode other than d or e in the [Drive Mode] screen to cancel
Mirror Lock-up shooting. The setting is canceled when the camera is turned
off if [Drive Mode] is set to P (Off) in [Memory] (p.312) of the [A Rec. Mode
5] menu.
• The mirror automatically returns to its original position if 1 minute elapses after the mirror pops up when the shutter release button is pressed for the first time (except while using Multi-exposure).
• The Shake Reduction function is automatically turned off when d or e is set.
• The beep that sounds when the mirror pops up can be turned off. (p.288)
Taking Pictures Continuously
Continuous Shooting
Pictures can be taken continuously while the shutter release button is kept pressed.
The following two types of Continuous Shooting are available.
g
Continuous
Shooting (Hi) h
Continuous
Shooting (Lo)
For JPEG image with p/C, up to approx. 30 frames are taken continuously at a maximum of approx. 7.0 fps.
For JPEG image with p/C, pictures are taken continuously at a maximum of approx. 1.6 fps until the SD
Memory Card is full.
4
When the file format is [RAW] (PEF), up to approx. 8 frames for g and up to approx. 10 frames for h can be taken continuously.
1
Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select g.
3
Press the four-way controller (3) and use the four-way controller
(45) to select g or h.
Drive Mode
Continuous Shooting (Hi)
MUP
OK OK
4
Press the 4 button.
The camera is ready to take a picture.
MENU Cancel
151
152
5
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
6
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully pressed. Take your finger off the shutter release button to stop.
4
• If the focus mode is set to l (Single mode), the focus position is locked in the first frame and pictures are taken continuously at the same interval.
• Focusing is continuously activated during Continuous Shooting when the focus mode is set to k (Continuous mode).
• You can also use the remote control for Continuous Shooting. (p.145)
• The shutter cannot be released until charging is complete when using the built-in flash. You can set the camera to enable shutter release before the
built-in flash is ready in [20. Release While Charging] of the [A Custom
• Select a mode other than g or h in the [Drive Mode] screen to cancel the
Continuous Shooting. The setting is canceled when the camera is turned off
if [Drive Mode] is set to P (Off) in [Memory] (p.312) of the [A Rec. Mode 5]
menu.
• The shooting speed may be slower when [Lens Correction] (p.218) is set to
On.
Interval Shooting
During Interval Shooting, pictures are taken at a set interval from a set time.
• Interval Shooting is not available in the following situations.
- when the exposure mode is set to A, B (Green), p (Bulb), or C
(Movie)
- when Extended Bracketing, Digital Filter or HDR Capture is set
• When Interval Shooting is set, Multi-exposure is not available.
1
Select [Interval Shooting] in the [A Rec. Mode 2] menu
and press the four-way controller (5).
The [Interval Shooting] screen appears.
2
Use the four-way controller
(23) to select [Interval].
Interval Shooting
Start Shooting
00 00 00 " When taking two or more pictures, set the wait time until the next picture is taken.
Use the four-way controller (45) to select the number of hours, minutes, and seconds, and use the four-way controller
(23) to set the time.
Interval
Number of Shots
Start Interval
Start Time
MENU Cancel
You can set up to 24 hours, 00 minutes, and 00 seconds.
002images
Now
OK OK
3
Use the four-way controller (23) to select [Number of
Shots].
Set the number of shots to be taken.
Press the four-way controller (5) and use the four-way controller (23) to select the number of shots to be taken.
You can select between 1 and 999 shots.
4
Use the four-way controller (23) to select [Start Interval].
Set the time when the first picture is taken.
Press the four-way controller (5) and use the four-way controller (23) to select [Now] or [Set Time].
Now
Set Time
Shooting starts immediately. You can take two or more pictures.
Shooting starts at the set time. Press the four-way controller
(3) to select [Start Time], use the four-way controller (45) to select the time, and use the four-way controller (23) to set the start time.
5
Use the four-way controller (23) to select [Start
Shooting] and press the 4 button.
The camera is ready to take a series of interval pictures.
153
4
154
6
Press the shutter release button halfway.
The focus indicator ] appears when focused.
Press the shutter release button to start interval shooting
4
7
Press the shutter release button fully.
When [Start Interval] is set to [Now], the first picture is taken. When set to [Set Time], shooting starts at the set time.
For shooting multiple pictures, pictures are taken at the interval set in
Step 2.
After the set number of pictures is taken, the camera returns to normal
Capture mode.
• The camera cannot be operated during Interval Shooting. To cancel the
Interval Shooting, press any button on the back of the camera or press the shutter release button and the 3 button to display the exit confirmation screen, and then use the four-way controller (23) to select [Exit] and press the 4 button. You can also exit the Interval Shooting by turning the main switch off or turning the mode dial.
• [Single Frame Shooting] is selected regardless of the current drive mode setting.
• If the subject is not in focus with the focus mode set to l (Single mode) or if the [Interval] setting is too short and the previous image processing cannot be completed before taking the next picture, no picture may be taken.
• Although each shot taken is displayed on the monitor with Instant Review, they cannot be enlarged or deleted.
• The [Interval] setting is disabled when [Number of Shots] is set to [1].
• Interval Shooting is canceled when the SD Memory Card has no more available space.
• If the Auto Power Off function (p.304) turns the camera off during Interval
Shooting, the camera automatically turns on again when the shooting time approaches.
• It is recommended to use the AC adapter kit K-AC50 (optional) when using
the Interval Shooting over a long period of time. (p.53)
Multi-exposure
You can create a composite picture by taking multiple frames.
• Multi-exposure is not available in the following situations.
- when the exposure mode is set to B (Green) or C (Movie)
- when Digital Filter, HDR Capture or Cross Processing is set
• When Multi-exposure is set, the following functions are not available.
- Exposure Bracketing, Extended Bracketing or Interval Shooting (The function selected last is used)
- Lens Correction
1
Select [Multi-exposure] in the [A Rec. Mode 2] menu and
press the four-way controller (5).
The [Multi-exposure] screen appears.
2
Use the four-way controller (23) to select [Number of
Shots].
3
Press the four-way controller (5) and use the four-way controller
(23) to select the number of shots.
Select from 2 to 9 shots.
Multi-exposure
Start Shooting
Number of Shots
Auto EV Adjustment
2 times
4
155
MENU Cancel OK OK
4
Press the 4 button.
5
Use the four-way controller (23) to select [Auto EV
Adjustment] and use the four-way controller (45) to
select O or P.
When set to O (On), the exposure is adjusted automatically according to the number of shots.
6
Use the four-way controller (23) to select [Start
Shooting] and press the 4 button.
The camera is ready to take a picture.
156
7
Take a picture.
The composite picture is displayed in Instant Review each time the shutter release button is pressed. Press the i button during Instant
Review to discard pictures taken up to that point and take pictures again from the first frame.
The pictures are saved when the set number of shots is taken, and then the [Multi-exposure] screen appears again.
4
• If any of the following operations are performed while shooting, the pictures that have been already taken are saved and Multi-exposure is ended.
- when the Q button, 3 button, four-way controller (2345), M button or |/Y button is pressed
- when the mode dial is turned
- when Exposure Bracketing is set
• When shooting in Multi-exposure mode using Live View, a semi-transparent composite image of the pictures taken is displayed. (It is not displayed when the camera is connected to an AV device.)
Shooting while Adjusting the
Settings (Auto Bracketing)
157
Auto Bracketing is a function for shooting while automatically changing the camera settings. There are two Auto Bracketing modes: Exposure
Bracketing and Extended Bracketing.
You can set Auto Bracketing Order in [8. Auto Bracketing Order] in the
[A Custom Setting 2] menu (p.91).
1 0 - + Standard ´ Underexposed ´ Overexposed (default setting)
2 - 0 + Underexposed ´ Standard ´ Overexposed
3 + 0 Overexposed ´ Standard ´ Underexposed
4 0 + Standard ´ Overexposed ´ Underexposed
4
Shooting while the Exposure is Automatically
Changed (Exposure Bracketing)
You can take continuous pictures with different exposures when the shutter release button is pressed. You can select to take 2 images
(Standard/+), 2 images (Standard/-), 3 images or 5 images. When taking
3 pictures, the first image is exposed with no compensation, the second image is underexposed (negative compensation) and the third image is overexposed (positive compensation).
Standard exposure Underexposure Overexposure
• Exposure Bracketing is not available in the following situations.
- when the exposure mode is set to p (Bulb)
- when HDR Capture is set
• Exposure Bracketing and Multi-exposure cannot be used at the same time.
The function selected last is used.
158
1
Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select l.
3
Press the four-way controller (3) and use the four-way controller
(45) to select l, b, or c.
Drive Mode
Exposure Bracketing
MUP
4
-5 4 3 2 1
3image(s)
MENU Cancel
1 2 3 4 +5
±0.5EV
OK OK l b c
Exposure
Bracketing
Exposure
Bracketing +
Self-timer
Exposure
Bracketing +
Remote Control
Takes pictures with the shutter release button.
Takes pictures with the self-timer. Self-timer
operates according to the self-timer (p.143)
setting.
Takes pictures with the remote control. Remote control operates according to the remote control
(p.145) setting. When set to i (Remote
Continuous Shooting), the shutter is released immediately.
4
Turn the front e-dial (R) to set the number of shots.
Select [2 images (+)], [2 images (-)], [3 images] or [5 images].
5
Turn the rear e-dial (S) to set the bracketing amount.
The following values can be set according to the step interval set in [1.
EV Steps] (p.120) in the [A Custom Setting 1] menu.
Step Interval
1/3 EV
1/2 EV
Bracketing Amount
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0
±0.5, ±1.0, ±1.5, ±2.0
Available operations m button +
Rear e-dial (S)
| button
Adjusts the EV compensation when taking only underexposed or overexposed images with Exposure
Bracketing. Images are taken with an EV compensation value set to 0 (intermediate value). (Up to ±8 EV)
Resets the compensation value to ±0.
6
Press the 4 button.
The value for the first image blinks on the monitor.
The camera is ready to take a picture.
7
Press the shutter release button halfway.
When the subject is in focus, the focus indicator ] appears in the viewfinder and the EV compensation value appears on the status screen and LCD panel and in the viewfinder.
8
Press the shutter release button fully.
Continue to press the shutter release button until the set number of shots has been captured.
Consecutive images will be taken according to the order set in [8. Auto
Bracketing Order] of the [A Custom Setting 2] menu (p.91).
159
4
• When the focus mode is set to l (Single mode), the focus position is locked in the first image and is used for subsequent images.
• When you take your finger off the shutter release button during Exposure
Bracketing, the exposure setting will remain effective for twice the amount of
the exposure metering timer (default setting is about 20 seconds) (p.118) and
you can take a picture at the next compensation value. In this case, autofocus works for each image. After about twice the amount of the exposure metering timer elapses, the camera returns to settings for taking the first image.
• When [9. One-Push Bracketing] in the [A Custom Setting 2] menu (p.91) is
set to [On], even if the shutter release button is not continuously pressed fully, all images are automatically shot with one press of the shutter release button.
• You can combine Exposure Bracketing with the built-in flash or external flash
(P-TTL auto only) to change only the flash output continuously. However, when using an external flash, holding the shutter release button down to take consecutive images may cause the second and third images to be taken before the flash is fully charged. Take each image after confirming that charging is complete.
• If you use Exposure Bracketing frequently, you can assign it to the |/Y button. (p.279)
160
Shooting while Adjusting Other Settings
(Extended Bracketing)
4
You can save pictures with three different levels of White Balance,
Saturation, Hue, High/Low Key Adjustment, Contrast and Sharpness.
Unlike Exposure Bracketing, three pictures are saved each time the shutter is released.
• When Extended Bracketing is set, the file format is always set to [JPEG] and cannot be changed. You cannot use Extended Bracketing when the file format is set to [RAW] or [RAW+].
• When Extended Bracketing is set, the following functions are not available.
• Interval Shooting or Multi-exposure
• Cross Processing, Digital Filter or HDR Capture (The function selected last is used)
1
Select [Extended Bracketing] in the [A Rec. Mode 2]
menu and press the four-way controller (5).
The [Extended Bracketing] screen appears.
2
Press the four-way controller
(5).
Extended Bracketing
Off
Bracketing Amount
MENU
3
Use the four-way controller (23) to select an item and press the
4 button.
Extended Bracketing
WB
S
Off
White Balance
Saturation
Hue
High/Low Key Adj
Contrast
Sharpness
MENU Cancel OK OK
4
Use the four-way controller (23) to select [Bracketing
Amount] and press the four-way controller (5).
5
Use the four-way controller (23) to select the bracketing amount
and press the 4 button.
Select [±1] (default setting), [±2], [±3] or
[±4].
For [White Balance], select from [BA±1]
(default setting), [BA±2], [BA±3], [GM±1],
[GM±2] or [GM±3].
6
Press the 3 button twice.
The camera returns to Capture mode.
7
Take a picture.
Three images are saved.
Extended Bracketing
Saturation
Bracketing Amount ±1
±2
±3
±4
MENU Cancel OK OK
• Exposure Bracketing and Extended Bracketing can be used at the same time. When used at the same time, each time the shutter is released for
Exposure Bracketing, three images with Extended Bracketing applied are saved.
• Parameters that cannot be set due to the image finishing tone setting of
Custom Image also cannot be set for Extended Bracketing. (Example: When set to [Monochrome], Saturation and Hue cannot be selected for Extended
• When [Fine Sharpness] or [Extra Sharpness] is set for Custom Image, the sharpness of Extended Bracketing operates as Fine Sharpness or Extra
Sharpness.
• When [Contrast] is set for Custom Image, the contrast of Extended
Bracketing operates according to the [Contrast] setting.
161
4
162
Taking Pictures Using Digital Filters
4
You can apply a filter when taking pictures.
The following filters can be selected.
Filter Name
Toy Camera
Retro
High Contrast
Extract Color
Starburst
Fish-eye
For taking pictures that look as if taken with a toy camera.
Effect
For taking pictures with the look of old photos.
Parameter
Shading Level: +1 to +3
Blur: +1 to +3
Tone Break: Red/Green/Blue/Yellow
Toning: -3 to +3
Frame Composite: None/Thin/
Medium/Thick
For taking pictures with high contrasts.
+1 to +5
For extracting two specific colors and making the rest of the image black and white.
For taking pictures with a soft focus throughout the image.
Extracted Color 1: Red/Magenta/
Blue/Cyan/Green/Yellow
Extractable Range of Color 1:
-2 to +2
Extracted Color 2: Red/Magenta/
Blue/Cyan/Green/Yellow/OFF
Extractable Range of Color 2:
-2 to +2
Soft Focus: +1 to +3
Shadow Blur: OFF/ON
Shape: Cross/Star/Snow Crystal/
Heart/Musical Note For taking pictures of night scenes or lights reflected on water with a special sparkling look by adding extra glitter to the highlights.
Effect Density: Small/Medium/Large
Size: Small/Medium/Large
Angle: 0°/30°/45°/60°
For taking pictures that look as if taken with a fish-eye lens.
Weak/Medium/Strong
163
Filter Name
Custom Filter
Effect
Customize and save a filter to your own preferences.
Parameter
High Contrast: OFF/+1 to +5
Soft Focus: OFF/+1 to +3
Tone Break: OFF/Red/Green/Blue/
Yellow
Shading Type: 6 types
Shading Level: -3 to +3
Distortion Type: 3 types
Distortion Level: OFF/Weak/
Medium/Strong
Color
For taking pictures with the selected color filter.
Select from 18 filters (6 colors × 3 tones).
Invert Color: OFF/ON
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Density: Light/Standard/Dark
*1 Not available when the exposure mode is set to C (Movie).
*2 Available only when the exposure mode is set to C (Movie).
4
• When Digital Filter is set, the file format is always set to [JPEG] and cannot be changed. You cannot use Digital Filter when the file format is set to [RAW] or [RAW+].
• When Digital Filter is set, the following functions are not available.
- Interval Shooting, Multi-exposure, Continuous Shooting
- Extended Bracketing or HDR Capture (The function selected last is used)
Depending on the filter used, it may take longer to save images.
1
Select [Digital Filter] in the [A Rec. Mode 2] menu and
press the four-way controller (5).
The screen for selecting a filter appears.
164
2
Use the four-way controller
(45) to select a filter.
Starburst
MENU Cancel Check
AE.L
OK OK
4
3
Use the four-way controller
(23) to select the parameter and
the four-way controller (45) to adjust the parameter’s value.
Shape
MENU Cancel Check
AE.L
OK OK
Available operations
Main switch (|)
L button
Uses Digital Preview to preview the background image with the filter effect applied. (Not available when the exposure mode is set to C (Movie).)
Saves the background image. Select [Save as] and press the 4 button.
4
Press the 4 button.
The camera is ready to take a picture.
• When the exposure mode is set to C (Movie), change the settings from
[Movie] in the [A Rec. Mode 4] menu. (p.171)
• Select [Not use any filters] in Step 2 to finish shooting with digital filter.
• You can also apply digital filter after shooting them to JPEG/RAW images in
Shooting with Live View
165
You can shoot a picture while displaying the real-time image on the monitor.
• The image in Live View may differ from the captured image if the brightness of the subject is low or high.
• If any changes occur in the shooting light source during Live View, the image may flicker.
• If the camera position is changed rapidly during Live View, the image may not be displayed with the appropriate brightness. Wait for the display to become stable before shooting.
• Noise may appear on the Live View image when used in dark locations.
• Live View can be displayed for up to 5 minutes. When Live View is ended after the elapse of 5 minutes, Live View can be restarted by pressing the U button.
• If you continue shooting with Live View for a prolonged period, the internal temperature of the camera may increase, resulting in lower quality images. It is recommended that you turn off Live View when not shooting. To prevent the image quality from degrading, allow enough time for the camera to cool down while shooting with long exposures or recording movies.
• If the internal temperature of the camera becomes high, l (temperature warning) will appear on the monitor and Live View may not be available.
• If Live View is used in places where the camera may become hot, such as in direct sunlight, l (temperature warning) may appear on the monitor. Cancel
Live View, as the internal temperature of the camera is rising.
• If Live View is used even after l (temperature warning) appears, Live View may end before 5 minutes elapse. Shooting with the viewfinder is available even if Live View is ended.
• The higher the sensitivity, the more noise and color unevenness may occur in the Live View image and/or captured image.
4
• During Live View, nothing is displayed in the viewfinder.
• Holding the camera by hand and shooting while viewing the monitor may cause camera shake. Use of a tripod is recommended.
• The field of view of the image display is nearly 100%.
• You can use the provided AV cable (I-AVC7) or a commercially available
HDMI cable to display Live View images on a TV or monitor. (p.256)
• Live View is not displayed when data is being saved to an SD Memory Card.
166
Setting Live View
4
You can set the display and autofocus mode for Live View.
1
Select [Live View] in the [A Rec. Mode 4] menu and press
the four-way controller (5).
The [Live View] screen appears.
2
Press the four-way controller (5) and use the four-way controller
(23) to select an autofocus method.
Live View
Autofocus Method
Show Grid
Info Overlay
Histogram
Bright/Dark Area
MENU Cancel OK OK
I
Face Detection
AF i
Contrast AF
S
Phase Difference
AF
Gives autofocus priority to detected faces and performs contrast autofocus. A yellow frame appears for a main face (white frames appear for other faces), and autofocus and automatic exposure are performed for the main face. (default setting)
The face detection is not performed when the focus mode is set to \.
Displays Live View and performs autofocus based on the information obtained from the image sensor.
Cancels Live View and performs autofocus with the AF sensor.
If the shutter release button is pressed halfway during
Live View, the Live View image will disappear and the autofocus system operates. Once focused, the Live
View image will be displayed again.
3
Press the 4 button.
4
Use the four-way controller (23) to select [Show Grid]
and press the four-way controller (5).
5
Use the four-way controller (23) to select a grid display type and
press the 4 button.
Live View
Autofocus Method
Show Grid
Info Overlay
Histogram
Bright/Dark Area
Select from [Off] (default setting), e
(4x4 Grid), f (Golden Section) or g
(Scale).
OK OK MENU Cancel
6
Use the four-way controller (23) to select [Info Overlay],
[Histogram] or [Bright/Dark Area].
7
Use the four-way controller (45) to select O or P.
8
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
167
4
It takes more time to focus on the subject when using I or i than when using S. It is also difficult for the camera to focus on the following objects (or under the following conditions).
- objects with poor contrast
- objects with no vertical contrast, such as horizontal stripes
- objects with constantly changing brightness, shape, or color, such as a water fountain
- objects whose distance from the camera changes
- small objects
- objects appearing in both the foreground and background
- when using a special filter
- objects at the edge of the screen
168
Taking a Still Picture
1
Select an exposure mode.
Set the mode dial to any mode other than C.
2
Press the U button.
4
The mirror pops up and a real-time image is displayed on the monitor.
Press the U button again to exit Live View.
Live View display
(All of the indicators are displayed here for explanatory purposes.)
1 2 3 4 5 6 7 8
P USER
9
10
11
16
-5 4 3 2 1
2000 F2.8
1 2 3 4 +5
ISO 3200 [1234]
17 18 19 20 21
1 Exposure Mode
2 Flash Mode
3 Drive Mode
4 White Balance
5 Custom Image
6 Extended Bracketing/Multiexposure/Interval Shooting/
Digital Filter/HDR Capture
7 Number of shots using Multiexposure/Cross Processing
12
13
14
15
2000 F2.8
22
ISO 400
23
[ 37]
8 Battery level
9 Adjusting composition
10 Temperature warning
11 Electronic Level
12 Contrast AF frame
13 Phase Difference AF frame/AF point
14 EV Compensation
15 Histogram
16 AE Lock
17 Shutter speed
169
18 Aperture value
19 EV bar
20 Sensitivity
21 Remaining image storage capacity
22 Main face detection frame
(Face Detection AF)
23 Face detection frame (Face
Detection AF)
* Indicator 9 is displayed when switching to Live View after adjusting the
composition in [Composition Adjust.] (p.220) in the [A Rec. Mode 2] menu.
* Indicator 11 is displayed when [Electronic Level] is set to O (On) (p.299).
When the Electronic Level function is assigned to the |/Y button
(p.285), press the |/Y button to switch the display on/off.
* Indicator 13 (Phase Difference AF frame) is displayed in white during Live
View. When the subject is in focus, a green square frame is displayed instead. It turns red when the subject is not in focus. It is not displayed when the focus mode is set to \.
* When 17, 18, and 20 can be changed, 5 appears next to the set value.
* Indicators 22 and 23 are displayed when [Autofocus Method] is set to I and the camera detects person’s face(s). (Up to 16 face recognition frames are displayed on the monitor.) When the subject is in focus, a green frame is displayed. It turns red when the subject is not in focus.
4
Available operations
M button
| button
Press and hold 4 button *1
4 button *1
Four-way controller
(2345)
Enlarges the image.
2, 4, or 6 times original size (when the focus mode is
=)
2, 4, 6, 8 or 10 times original size (when the focus mode is \)
Returns the position of the display area to the center
(during enlarged view).
Switches the function of the four-way controller
(2345) to Change AF point or direct key operation.
Returns the position of the AF point to the center
(when Change AF point is enabled).
Changes the AF point (when Change AF point is enabled).
Moves the display area (during enlarged view).
*1 Available only when [Autofocus Method] is I or i, and the focus mode is l or the AF point switching dial is set to j (Select).
3
Position the subject on the monitor and press the shutter release button halfway.
The autofocus system operates.
When the focus mode is set to \, turn the focusing ring until the subject is clearly visible on the focusing screen.
170
4
Press the shutter release button fully.
The picture is taken.
• When the focus mode is set to k and [Autofocus Method] is set to i, the camera focuses on the center of the screen when autofocus starts and then automatically tracks the subject when it is in focus. When [Autofocus
Method] is set to I, the camera automatically tracks the detected face.
• Images captured in magnified display are recorded at normal size.
• You can check the depth of field on the monitor by turning the main switch to
| during Live View.
4
The status screen and control panel cannot be displayed during Live View. To change the settings, press the 3 button and change them from each menu.
Recording Movies
You can record movies using Live View.
Changing the Movie Settings
You can record movies with monaural audio in AVI file format.
1
Select [Movie] in the [A Rec. Mode 4] menu and press the
four-way controller (5).
The [Movie] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select the number of recorded pixels, and press the
4 button.
1280x720
Recorded Pixels
Quality Level
Sound
Cross Processing
Digital Filter
Movie Aperture Control
Shake Reduction
MENU Cancel
00:31'55"
FullHD
25
HD
30
HD
25
VGA
30
VGA
25
Fixed
OK OK
Recorded Pixels a b (default setting) b c c
Pixels
1920×1080
1280×720
1280×720
640×480
640×480
Aspect Ratio
16:9
16:9
16:9
4:3
4:3
Frame Rate
25 fps
30 fps
25 fps
30 fps
25 fps
3
Use the four-way controller (23) to select [Quality Level]
and press the four-way controller (5).
4
Use the four-way controller (23) to select the quality
level and press the 4 button.
Select from C (Best; default setting), D (Better) and E (Good).
When the recorded pixels and quality level are changed, the amount of recordable time at that setting appears at the top right of the screen.
4
171
172
5
Use the four-way controller (23) to select [Sound] and
press the four-way controller (5).
6
Use the four-way controller (23) to select g or Z and
press the 4 button.
4 g Records sound. (default setting)
Z Does not record sound.
7
Set Cross Processing and Digital Filter as necessary.
Refer to p.225 for details on Cross Processing and p.162 for Digital Filter.
8
Use the four-way controller (23) to select [Movie
Aperture Control] and press the four-way controller (5).
9
Use the four-way controller (23) to select the [Fixed] or
[Auto] and press the 4 button.
Fixed
The movie is recorded at the aperture value set before movie recording starts. (default setting)
The aperture is controlled automatically.
Auto
10
Use the four-way controller (23) to select [Shake
Reduction] and press the 5 button.
11
Use the four-way controller (23) to select k or l
and press the 4 button. k Uses Shake Reduction.
l Does not use Shake Reduction. (default setting)
12
Press the 3 button twice.
The camera is ready to record a movie.
Connecting a Microphone
You can connect a commercially available stereo microphone to the microphone terminal on the camera and record stereo sound. Using an external microphone can also help to reduce the possibility of recording camera operation sounds.
The following specifications are recommended for external microphones.
• Plug: Stereo mini plug (ø3.5 mm)
• Format:
• Power:
• Impedance:
Stereo electret condenser
Plug-in Power Method (operating voltage of 2.0 V or lower)
2.2 k Ω
1
Turn off the camera.
2
Open the microphone terminal cover and connect the plug of the microphone to the microphone terminal on the camera.
4
173
3
Turn the camera on.
If the external microphone is disconnected during recording, the camera cannot switch to the internal microphone until recording has stopped. No sound will be recorded.
If you used an external microphone to record movie sound in stereo, the sound can be played back in stereo when you use a commercially available HDMI
cable to output the movie to an HDMI-compatible AV device. (p.258) If you use
an AV cable to output the movie, monaural sound is played back.
174
Recording Movies
1
Set the mode dial to C.
4
Live View for movie recording is displayed.
Sound
F2.8
-2 1 1 +2
00:30'00"
Recordable Time
Shake Reduction
Available operations
Rear e-dial (S) Changes the aperture value when [Movie Aperture
Control] is set to [Fixed]. (default setting)
| button Sets the aperture value to obtain a proper exposure.
(default setting)
Returns the position of the display area to the center
(during enlarged view).
Performs EV compensation (up to ±2 EV).
m button +
Rear e-dial (S)
M button Enlarges the image.
2, 4, or 6 times original size (when the focus mode is
=)
2, 4, 6, 8 or 10 times original size (when the focus mode is \)
Press and hold 4 button *1
4 button *1
Switches the function of the four-way controller
(2345) to Change AF point or direct key operation.
Returns the position of the AF point to the center
(when Change AF point is enabled).
Four-way controller
(2345)
Changes the AF point (when Change AF point is enabled).
Moves the display area (during enlarged view).
*1 Available only when [Autofocus Method] is I or i, and the focus mode is l or the AF point switching dial is set to j (Select).
2
Position the subject on the monitor and press the shutter release button halfway.
The autofocus system operates.
When the focus mode is set to \, turn the focusing ring until the subject is clearly visible on the focusing screen.
3
Press the shutter release button fully.
Recording of the movie starts.
4
Press the shutter release button again.
Recording stops.
4
175
• When [Sound] is set to g (On), the camera operation sounds are also recorded. When recording a movie, mount the camera onto a tripod and do not operate the camera while recording.
• While recording a movie, the autofocus system does not operate.
• The flash is not available.
• When recording movies using image processing, such as Digital Filter, some frames may be dropped from the recorded movie.
• If the internal temperature of the camera becomes high during movie recording, the recording may be terminated to protect the camera circuitry.
176
• You can record movies continuously up to 4 GB or 25 minutes. When the SD
Memory Card is full, recording stops and the movie is saved.
• Live View images in C mode are displayed according to the [Live View]
settings (p.166) made in the [A Rec. Mode 4] menu. However, the Bright/
Dark Area warning is not displayed during movie recording.
• You can set the functions for when the front/rear e-dial or the | button is
• If you intend to shoot continuously for a long period, use of the AC adapter
kit K-AC50 (optional) is recommended. (p.53)
• You can also use the optional remote control to record a movie. (p.145)
• The sensitivity is fixed to [AUTO].
• If you want to view a movie on an external monitor while recording it, connect
the camera to an AV device with the mini HDMI terminal (p.258). You cannot
output a movie using the PC/AV terminal while recording.
4
Playing Back Movies
Recorded movies can be played back in Playback mode in the same manner as saved images.
1
Press the Q button.
The camera switches to Playback mode.
2
Use the four-way controller (45) to choose a movie to play back.
The first frame of the movie is displayed on the monitor.
3
Press the four-way controller
(2).
Movie playback starts.
4
177
Available operations
Movie 10min00sec
Four-way controller (2)
Rear e-dial (S)
Four-way controller (5)
Press and hold four-way controller (5)
Four-way controller (4)
Pauses/Resumes playback.
Volume control (6 levels)
Forwards a frame (during pause).
Fast-forwards playback while pressed.
Reverses playback./
Reverses a frame (during pause).
Fast-reverses playback while pressed.
Press and hold four-way controller (4)
Four-way controller (3)
L button
Stops playback./
Displays the playback mode palette (when
Saves the displayed image in JPEG format
(during pause).
When the movie ends, playback stops and the first frame is displayed again.
178
• You can use the provided AV cable I-AVC7 or a commercially available HDMI cable to play back the recorded movies on a TV screen or other AV devices.
• Even if you used an external microphone to record movie sound in stereo, monaural sound is played back when you output the movie via the PC/AV terminal. When you output the movie via the mini HDMI terminal, sound is played back in stereo.
4
Capturing a Still Picture from a Movie
You can capture a single frame from a movie and save it as a JPEG still picture.
1
Press the four-way controller (2)
in Step 3 on p.177 to pause the
movie, and display the frame to save as a still picture.
While paused, you can advance the movie in one-frame increments using the four-way controller (45).
The frame number and total number of frames appear at the top right of the screen.
2
Press the L button.
The save confirmation screen appears.
Frame number/Total number of frames
Movie 10min00sec
AE-L
3
Use the four-way controller (23) to select [Save as] and press the
4 button.
The captured image is saved as a new image.
Save as
Cancel
OK OK
Editing Movies
Movies can be divided and unwanted segments can be deleted.
1
Press the Q button.
The camera switches to Playback mode.
2
Use the four-way controller (45) to choose a movie to play back.
The first frame of the movie is displayed on the monitor.
3
Press the four-way controller (3).
The playback mode palette appears.
4
Use the four-way controller (2345) to select [ (Movie
Editing) and press the 4 button.
The movie editing screen appears.
5
Select point(s) where you want to divide the movie.
Up to four points can be selected.
00 min
00 sec
10 min 00 sec
4
179
MENU Exit OK OK
Available operations
Four-way controller (2)
Four-way controller (5)
Four-way controller (4)
Rear e-dial (S)
| button
Plays back/Pauses a movie.
Moves forward 1 second (during pause).
Moves to the next dividing point (during playback).
Moves backward 1 second (during pause).
Moves to the previous dividing point (during playback).
Volume control (6 levels)
Confirms/cancels a dividing point.
180
6
Press the i button to delete unwanted segments.
The screen to select segment(s) to delete is displayed.
00 min
02 sec
10 min 00 sec
4
Select segments for deletion
MENU OK
Available operations
Four-way controller (45) Moves the selection frame
4 button Confirms/cancels a selection of a segment to delete
3 button Exits the screen to select segments to delete
7
Press the 4 button.
The save confirmation screen appears.
00 min
00 sec
10 min 00 sec
MENU Exit OK OK
8
Use the four-way controller (23) to select [Save as] and press the
4 button.
The movie is divided at the specified points and the unwanted segments are deleted from it. And then the divided movie is saved as separate files and displayed on the screen.
MENU
Saves divided movie as separate files
Save as
Cancel
OK OK
Specify the dividing points in chronological order from the beginning of the movie. When canceling the selected dividing points, cancel each of them in reverse order (from the end of the movie to the beginning). While specifying dividing point(s), you cannot select the frames prior to the last selected frame as a dividing point, or cancel the selections of the dividing point(s).
5
Using the Flash
This chapter provides details on the built-in flash of X and describes how to take pictures with the external flash.
Flash Characteristics in Each Exposure
Mode ....................................................................182
Distance and Aperture when Using the
Built-in Flash .......................................................185
Lens Compatibility with the Built-in Flash .......186
Using an External Flash (Optional) ...................187
182
Flash Characteristics in Each
Exposure Mode
Using the Flash in b (Shutter Priority) Mode
• When taking a moving subject, you can use the flash to change the blur effect.
• Any desired shutter speed of 1/180 sec. or slower can be set for taking a flash photograph.
• The aperture value automatically changes according to the ambient brightness.
• The shutter speed is locked at 1/180 sec. when a lens other than a DA,
DA L, D FA, FA J, FA, F or A lens is used.
5
Using the Flash in c (Aperture Priority) Mode
• You can set the desired aperture value to take a flash photograph when you want to change the depth of field or shoot a subject farther away.
• The shutter speed automatically changes with the ambient brightness.
• The shutter speed shifts automatically anywhere from 1/180 sec. to a
slow shutter speed (p.70) that reduces camera shake. The slowest
shutter speed depends on the focal length of the lens in use.
• The shutter speed is locked at 1/180 sec. when a lens other than a DA,
DA L, D FA, FA J, FA or F lens is used.
Using the Slow-speed Sync
You can use slow-speed-sync in b (Shutter Priority) mode when shooting portraits with the sunset in the background. Both the portrait and the background are captured beautifully.
• Slow-speed Sync slows the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake. The picture will also blur if the subject moves.
• Slow-speed Sync shooting can also be performed with an external flash.
Using e/K/c Mode
1
Set the mode dial to e, K or c.
2
Press the E button.
The built-in flash pops up.
3
Press the four-way controller (3).
The [Flash Mode] screen appears.
4
Select G or H and press the 4 button.
The shutter speed is set slower to give a proper exposure for the background.
5
Take a picture.
Using b/L/a Mode
1
Set the mode dial to b, L or a.
2
Press the four-way controller (3).
The [Flash Mode] screen appears.
3
Select E or F and press the 4 button.
4
Set the shutter speed (for b mode) or shutter speed and
aperture value (for L or a mode).
Set so a proper exposure is obtained at a shutter speed of 1/180 second or slower.
5
Press the E button.
The built-in flash pops up.
6
Take a picture.
5
183
184
Using the Trailing Curtain Sync
Trailing Curtain Sync discharges the flash immediately before the shutter curtain closes. When shooting moving objects with a slow shutter speed,
Trailing Curtain Sync and Slow-speed Sync produce different effects depending on when the flash is discharged.
For example, when shooting a moving car with Trailing Curtain Sync, trailing light is captured while the shutter is open and the flash captures the car immediately before the shutter is closed. Therefore, the picture will include a sharp, well-lit car with trailing light behind it.
5
Slow-speed Sync
(Leading Curtain Sync)
Trailing Curtain Sync
1
Set the mode dial to any mode other than B, M or C.
2
Press the four-way controller (3).
The [Flash Mode] screen appears.
3
Select I or k and press the 4 button.
4
Press the E button.
The built-in flash pops up.
5
Take a picture.
Trailing Curtain Sync slows the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake.
Distance and Aperture when Using the Built-in Flash
185
Relationships between the guide number, aperture and distance must be considered when shooting with the flash to obtain a correct exposure.
Calculate and adjust the shooting conditions if the flash output is not sufficient.
Sensitivity Built-in Flash Guide Number Sensitivity Built-in flash guide number
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
Approx. 13
Approx. 18.4
Approx. 26
Approx. 36.8
Approx. 52
ISO 3200
ISO 6400
ISO 12800
Approx. 73.5
Approx. 104
Approx. 147
Approx. 208
Approx. 294
*1 This can be used when [3. Expanded Sensitivity] in the [A Custom Setting 1] menu is set to [On].
Calculating Shooting Distance from Aperture Value
The following equation calculates the distance of the flash for aperture values.
Maximum flash distance L1 = Guide number ÷ Aperture value
Minimum flash distance L2 = Maximum flash distance ÷ 5 *
* The value 5 used in the formula above is a fixed value which applies only when using the built-in flash alone.
Example: When the sensitivity is ISO 100 and the aperture value is F2.8
L1 = 13 ÷ 2.8 = approx. 4.6 (m)
L2 = 4.6 ÷ 5 = approx. 0.9 (m)
Therefore, the flash can be used in a range of about 0.9 m to 4.6 m.
However, the built-in flash in this camera cannot be used when the distance is 0.7 m or less. When the flash is used at closer than 0.7 m, it causes vignetting in the picture corners, light is distributed unevenly and a picture may be overexposed.
5
Calculating Aperture Value from Shooting Distance
The following equation calculates the aperture value for shooting distances.
Aperture value F = Guide number ÷ Shooting distance
Example: When the sensitivity is ISO 100 and shooting distance is 4 m, the aperture value is:
F = 13 ÷ 4 = 3.25
If the resulting number (3.25, in the above example) is not available as a lens aperture, the smaller number that is closest (2.8, in the above example) is generally used.
186
Lens Compatibility with the Built-in
Flash
Depending on the lens used with the X, even if a lens without a hood is attached, the use of the built-in flash may not be available or may be limited due to vignetting.
DA, DA L, D FA, FA J, and FA lenses not listed below can be used without problems.
* The following lenses were evaluated without a hood.
5
Unavailable due to vignetting
Lens Name
DA FISH-EYE 10-17mm F3.5-4.5ED (IF)
DA12-24mm F4ED AL
DA14mm F2.8ED (IF)
FA E 300mm F2.8ED (IF)
FA E 600mm F4ED (IF)
FA E 250-600mm F5.6ED (IF)
Available depending on other factors
Lens Name
F FISH-EYE 17-28mm F3.5-4.5
DA16-45mm F4ED AL
DA E 16-50mm F2.8ED AL (IF) SDM
DA17-70mm F4AL (IF) SDM
DA18-250mm F3.5-6.3ED AL (IF)
FA E 28-70mm F2.8AL
FA SOFT 28mm F2.8
FA SOFT 85mm F2.8
Restrictions
Vignetting may occur if the focal length is less than 20 mm.
When the focal length is less than 28 mm or when the focal length is 28 mm and the shooting distance is 1 m or less, vignetting may occur.
When the focal length is 20 mm or less or when the focal length is 35 mm and the shooting distance is less than 1.5 m, vignetting may occur.
When the focal length is less than 24 mm or when the focal length is 24 mm and the shooting distance is 1 m or less, vignetting may occur.
Vignetting may occur if the focal length is less than 35 mm.
Vignetting may occur if the focal length is
28 mm and the shooting distance is less than
1 m.
Built-in flash always discharges fully.
Built-in flash always discharges fully.
Using an External Flash (Optional)
187
Using an optional external flash AF540FGZ, AF360FGZ, AF200FG or
AF160FC enables a variety of flash modes, such as P-TTL auto flash mode, depending on the external flash being used. See the chart below for details.
(z: Available #: Restricted ×: Not available)
Flash
Camera Function
Red-eye reduction flash
Auto flash discharge
After the flash is charged, the camera automatically switches to the flash sync speed.
Aperture value is automatically set in e mode and b mode.
P-TTL auto flash (appropriate sensitivity:
ISO 100 to 3200)
Slow-speed Sync
Flash exposure compensation
AF assist light of external flash
Trailing Curtain Sync
Contrast-control-sync flash mode
Slave flash
High-speed flash sync
Wireless flash
Built-in
Flash z z z z
z z z
× z
×
×
AF540FGZ
AF360FGZ z z z z
z z z z z z z
AF200FG
AF160FC z z z z
z z
×
×
#
×
×
×
*1 Available only when using a DA, DA L, D FA, FA J, FA, F or A lens.
*2 Shutter speed of 1/90 sec. or slower.
*3 When combined with the AF540FGZ or AF360FGZ, 1/3 of the flash discharge can be output by the built-in flash and 2/3 can be output by the external flash.
*4 Available only when combined with the AF540FGZ or AF360FGZ.
*5 Multiple AF540FGZ or AF360FGZ units, or a combination of an AF540FGZ or AF360FGZ unit and the built-in flash is required.
5
Flashes with reversed polarity (the center contact on the hot shoe is minus) cannot be used due to the risk of damaging the camera and flash.
188
5
About the Display Panel for AF360FGZ
The AF360FGZ itself does not have the function to set the FORMAT size to [DIGITAL]. However, when it is used with a SLR Digital Camera, the difference in focal length between a 35 mm camera and the X is automatically calculated based on the difference in angle of view and is displayed on the panel (when using DA, DA L, D FA, FA J, FA or F lens).
The conversion indicator appears and the FORMAT size indicator disappears when the exposure metering timer of the X is on (it returns to 35 mm format display when the exposure metering timer is turned off).
85mm
/77mm
50mm 35mm
28mm
/24mm
20mm 18mm Lens Focal Length
Exposure metering timer
Off
Exposure metering timer
On
85mm 70mm 50mm 35mm 28mm 24mm *
58mm 48mm 34mm 24mm 19mm 16mm *
* Using wide-angle panel
Using P-TTL Auto Mode
You can use [P-TTL Auto] with the AF540FGZ, AF360FGZ, AF200FG or
AF160FC flash unit. The flash pre-flashes before the actual flash and confirms the subject (the distance, brightness, contrast, whether it is backlit, etc.) using the camera 77-segment metering sensor. The flash output for the actual flash is adjusted based on the information obtained from the pre-flash, enabling flash photography with more accurate exposure for the subject than with normal TTL auto.
1
Remove the cover of the hot shoe and attach the external flash.
2
Turn on the camera and the external flash.
3
Set the external flash mode to [P-TTL Auto].
4
Confirm that the external flash is fully charged and then take a picture.
• P-TTL Auto is only available with an AF540FGZ, AF360FGZ, AF200FG or
AF160FC flash unit.
• The b will light in the viewfinder when the flash is ready (fully charged).
• For details such as operation method and effective distance, please refer to the external flash manual.
• The flash does not discharge if the subject is bright enough when the flash mode is C or i. Therefore, it may not be suitable for Daylight-Sync shooting.
• Never press the E button when any external flash unit is attached to the camera. The built-in flash will hit the external flash. If you want to use both at once, set the wireless mode or connect them using the extension cord.
189
Using High-Speed Flash Sync Mode
With the AF540FGZ or AF360FGZ, you can discharge the flash to take a picture at a shutter speed faster than 1/180 second.
1
Remove the cover of the hot shoe and attach the external flash (AF540FGZ or AF360FGZ) to the camera.
2
Set the exposure mode to b or a.
3
Turn on the camera and the external flash.
4
Set the external flash sync mode to HSb (High-speed flash sync).
5
Confirm that the external flash is fully charged and then take a picture.
5
• The b will light in the viewfinder when the flash is ready (fully charged).
• High-speed flash sync is available only when the shutter speed is set faster than 1/180 sec.
• High-speed flash sync is not available when the exposure mode is set to p
(Bulb).
190
Using Flash in Wireless Mode
By using two external flashes (AF540FGZ or AF360FGZ) or using the built-in flash with one or more external flashes, you can shoot in P-TTL flash mode without connecting the flash units with a cord.
• Set the power switch of the external flash to WIRELESS.
• Two or more AF540FGZ/AF360FGZ external flashes are required to use high-speed flash sync in wireless mode. This function cannot be used in combination with the built-in flash.
• Set the wireless mode of the external flash not directly connected to the camera to SLAVE.
5
Setting the Channel for the External Flash
First, set the channel for the external flash unit.
1
Set the channel for the external flash unit.
2
Remove the cover of the hot shoe and attach the external flash.
3
Turn on the camera and the external flash, and press the shutter release button halfway.
The built-in flash is set to the same channel as the external flash unit.
• When set to r mode, the channel currently set for the built-in flash is displayed in the viewfinder for 10 seconds.
• Be sure to set all the flashes to the same channel. Refer to the manual of the
AF540FGZ or AF360FGZ for details on how to set the channel on the external flash.
Using the Built-in Flash in Wireless Mode
Set the camera to wireless flash mode when using an external flash in combination with the built-in flash.
1
Press the four-way controller (3).
The [Flash Mode] screen appears.
2
Select r and press the 4 button.
The camera is ready to take a picture.
The channel for the built-in flash is displayed in the viewfinder and on the
LCD panel. The factory default setting is
CH1.
Flash Mode
Wireless Mode
MENU Cancel
0.0
OK OK
• r cannot be set when the exposure mode is set to B (Green).
• When the drive mode is set to i (Remote Control (3s delay)), d (Mirror
Lock-up) or e (Mirror Lock-up remote control), or the lens aperture is not set to the s position, r cannot be selected.
5
191
Changing the Built-in Flash Discharge Method
You can change the built-in flash discharge method used in wireless mode.
Set in [21. Flash in Wireless Mode] of the [A Custom Setting 3] menu
1
2
On
Off
Discharges the built-in flash as a master. (default setting)
Discharges the built-in flash as a control flash.
HSb (High-speed flash sync) is not available with the built-in flash.
192
Wireless Shooting
Using a Combination of the Built-in Flash and an External Flash
Unit
1
Remove the external flash unit after the channel is set on the camera, and place it at the desired location.
2
Set the camera flash to r mode, and press the E button.
3
Confirm that both flashes are fully charged and then take a picture.
5
Using a Combination of External Flash Units
1
Set the wireless mode of the external flash directly connected to the camera to [MASTER] or [CONTROL].
MASTER
CONTROL
Sets the camera to discharge both the flash directly connected to the camera and the wireless flash unit.
Sets the camera to discharge the flash directly connected to the camera as a control flash only, not as the main flash.
2
On the wireless remote flash unit, set the wireless flash mode to [SLAVE] and set the channel to the same channel as the flash directly connected to the camera. Then, place it at the desired location.
3
Confirm that both flashes are fully charged and then take a picture.
• The Shake Reduction function is automatically turned off in wireless mode.
• When using multiple AF540FGZ/AF360FGZ external flashes and performing high-speed flash sync shooting in wireless mode, set the flash directly connected to the camera to high-speed flash sync mode.
193
Wireless Flash Control (P-TTL Flash Mode)
When using external flash units (AF540FGZ or AF360FGZ) for wireless shooting, the following information is exchanged between the flash units before the flash is discharged.
Press the shutter release button fully.
È
1 The flash directly connected to the camera emits a control flash
(relays the flash mode of the camera).
2 The wireless remote flash emits a test flash (relays confirmation of subject).
3 The flash directly connected to the camera emits a control flash
(relays flash output to the wireless remote flash).
* The flash directly connected to the camera will emit a control flash one more time after this to relay the flash duration time when HSb
(High-speed flash sync) is set.
4 The wireless remote flash discharges.
When the wireless mode of the external flash directly connected to the
camera is set to [MASTER] or [21. Flash in Wireless Mode] (p.191) is set
to [On] for the built-in flash, all the flashes will discharge simultaneously.
5
Red-Eye Reduction
As with the built-in flash, the red-eye reduction function is available with an external flash. However, this function may not be available on some flashes or may have restrictions for usage conditions. Refer to
• The red-eye reduction function works by discharging the flash twice
even when only an external flash is used. (p.80)
• If the red-eye reduction function of the built-in flash is used when the external flash is set as the slave unit or with the wireless function, the pre-flash for red-eye reduction will trigger the external flash. Do not use the red-eye reduction function when using a slave unit.
194
Trailing Curtain Sync
When using the built-in flash with an external flash (AF540FGZ or
AF360FGZ) that is set to the Trailing Curtain Sync mode, the built-in flash will also use this mode. Confirm that both flash units are fully charged before shooting.
Connecting an External Flash with an
Extension Cord
5
When using the built-in flash with an external flash that does not have a wireless flash mode function such as AF200FG, attach the Hot Shoe
Adapter F
G
(optional) to the camera hot shoe and an Off-Camera Shoe
Adapter F (optional) to the bottom of the external flash, and connect these with the Extension Cord F5P (optional) as shown in the illustration below.
The Off-Camera Shoe Adapter F can be mounted to your tripod using the tripod screw.
Only a P-TTL auto flash can be used in combination with the built-in flash.
When combining with the built-in flash
Multiple Flash Shooting Using Extension
Cords
You can combine two or more external flashes (AF540FGZ, AF360FGZ or
AF200FG) or you can use two or more external flashes in combination with the built-in flash. You can use the extension cord connection terminal on the flash to connect the AF540FGZ. You can connect AF360FGZ or
AF200FG units as shown in the illustration below. Connect an external flash and the Hot Shoe Adapter F (optional) to the Off-Camera Shoe
Adapter F (optional) and then connect another Off-Camera Shoe Adapter
F with external flash using the Extension Cord F5P (optional).
Refer to the manual of the flash for details.
When combining two or more external flashes
195
5
• Do not combine with accessories that have a different number of contacts, such as a Hot Shoe Grip, as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using the AF540FGZ, AF360FGZ or AF200FG.
When using multiple external flashes or using an external flash with the built-in flash, P-TTL is used for flash control.
196
Contrast-Control-Sync Flash
Combining two or more external flashes (AF540FGZ, AF360FGZ or
AF200FG) or using an external flash in combination with the built-in flash allows multiple flash photography (contrast-control-sync flash photography). This is based on the difference between the amounts of light discharged from multiple units.
• The AF200FG must be combined with the AF540FGZ or AF360FGZ.
• Do not combine with accessories that have a different number of contacts, such as a Hot Shoe Grip, as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using the AF540FGZ, AF360FGZ or AF200FG.
5
1
Connect the external flash to the camera indirectly.
2
Set the sync mode for the external flash to contrastcontrol-sync mode.
3
Confirm that both the external flash and built-in flash are fully charged and then take a picture.
• When using two or more external flashes and the contrast-control-sync mode is set on the external master flash unit, the flash output ratio is 2 (master unit)
: 1 (slave units). When an external flash is used in combination with the builtin flash, the flash output ratio is 2 (external flash) : 1 (built-in flash).
• When using multiple external flashes or using an external flash with the builtin flash, P-TTL is used for flash control.
197
X-sync Socket
You can connect an external flash to the camera with a sync cord by using the X-sync socket.
Remove the Sync socket 2P cap and connect a sync cord to the X-sync socket.
• The use of high-voltage or high-current external flashes may cause a camera breakdown.
• Flashes with reversed polarity (the center of the sync plug is minus) cannot be used due to the risk of damaging the camera and flash.
• When a sync cord is connected to the X-sync socket, linked functions will not work.
• To prevent vignetting caused from Trailing Curtain Sync, it is recommended to take a test shot using a shutter speed one level slower than the flash sync speed.
• The contact of the X-sync socket is not dust-proof and water-resistant. Attach the provided Sync socket 2P cap when not in use.
5
198
Memo
6
Shooting Settings
This chapter describes how to set the save format for pictures taken and other settings.
Setting a File Format ..........................................200
Setting the White Balance .................................205
Correcting Images ..............................................214
Setting the Image Finishing Tone .....................222
Storing Frequently Used Settings ....................227
200
Setting a File Format
Setting the JPEG Recorded Pixels
You can select the number of recorded pixels from p, J, P and i.
The more pixels there are, the larger the picture and the bigger the file size. The file size will also vary according to the [JPEG Quality] setting.
The default setting is p.
Recorded Pixels p
J
P i
Pixels Paper Size
4928×3264 14"×17" / A2 paper
3936×2624 10"×12" / A3 paper
3072×2048 8"×10" / A4 paper
1728×1152 5"×7" / A5 paper
6
The paper sizes above are references for optimal printing by recorded pixels. The quality of the captured photo or printed picture depends on the quality level, exposure control, resolution of the printer and a variety of other factors.
1
Select [JPEG Recorded Pixels] in the [A Rec. Mode 1]
menu and press the four-way controller (5).
2
Use the four-way controller (23) to select the number of recorded
pixels and press the 4 button.
When the number of recorded pixels is changed, the number of pixels appears at the top left of the screen and the number of recordable images for that setting appears at the top right of the screen.
3
Press the 3 button.
The camera is ready to take a picture.
4928x3264
File Format
JPEG Recorded Pixels
JPEG Quality
AUTO AF Point Setting
D-Range Setting
Lens Correction
120
JPEG
16
M
10
M
6
M
2
M
MENU Cancel OK OK
Setting the JPEG Quality Level
You can set the image quality level (compression ratio). The file size will also vary according to the [JPEG Recorded Pixels] setting. The default setting is C (Best).
Z Premium
C Best
D Better
E Good
Images will be clearer but file size will be larger.
Images will be grainier but file size will be smaller.
1
Select [JPEG Quality] in the [A Rec. Mode 1] menu and
press the four-way controller (5).
2
Use the four-way controller (23) to select a quality level and press
the 4 button.
When the quality level is changed, the number of recordable images at that quality level appears at the top right of the screen.
3
Press the 3 button.
The camera is ready to take a picture.
File Format
JPEG Recorded Pixels
JPEG Quality
AUTO AF Point Setting
D-Range Setting
Lens Correction
120
JPEG
16
M
MENU Cancel OK OK
6
201
202
Setting a File Format
You can set the format of image files.
JPEG
RAW
RAW+
Captures images in JPEG format. (default setting)
You can change the number of recorded pixels in [JPEG Recorded
Pixels] and the image quality level in [JPEG Quality].
RAW format is a CMOS sensor output format saved without processing.
Effects of White Balance, Custom Image and Color Space are not applied to the captured images, but they are saved as actual original information. When you perform the development process by using
RAW Development function (p.271), or using the provided software
(PENTAX Digital Camera Utility 4) after transferring RAW data to a computer, you can create JPEG images with these effects.
Images are saved in both RAW and JPEG formats.
When [One Push File Format] is assigned to the |/Y button, you can press the |/Y button to temporarily change the file format and
save an image in both file formats. (p.203)
6
When Extended Bracketing, Digital Filter, HDR Capture or Cross Processing is set, the file format is set to [JPEG] and cannot be changed. To change the file format, turn these functions off.
1
Select [File Format] in the [A Rec. Mode 1] menu and
press the four-way controller (5).
2
Use the four-way controller (23) to select a file format.
When the file format is changed, the number of recordable images appears at the top right of the screen.
120
File Format
JPEG Recorded Pixels
JPEG Quality
RAW
RAW+
D-Range Setting
Lens Correction
MENU Cancel OK OK
3
Press the 4 button.
4
Press the 3 button.
The camera is ready to take a picture.
Setting the RAW File Format
You can select PEF or DNG format in [RAW
File Format] of the [A Rec. Mode 3] menu
(p.90) when capturing images in RAW
format.
1 2 3 4 5
D-Range Setting
ISO AUTO Setting
High-ISO NR
Slow Shutter Speed NR
Program Line
Color Space
RAW File Format
ISO
NR
AUTO
NR
AUTO
DNG
MENU Cancel OK OK
PEF PENTAX’s original RAW file format (default setting)
DNG
General-purpose, publicly available RAW file format designed by
Adobe Systems
203
Temporarily Changing the File Format using the
|/Y Button
When [One Push File Format] is assigned to the |/Y button, you can temporarily change the file format.
1
Select [Button Customization] in the [A Rec. Mode 5]
menu and press the four-way controller (5).
The [Button Customization] screen appears.
2
Use the four-way controller (23) to select [|/Y
Button] and press the four-way controller (5).
The [|/Y Button] screen appears.
3
Press the four-way controller (5).
4
Use the four-way controller (23) to select [One Push File Format]
and press the 4 button.
RAW/Fx Button
RAW One Push File Format
Exposure Bracketing
Digital Preview
Electronic Level
Composition Adjust.
6
MENU Cancel OK OK
204
6
5
Use the four-way controller
(23) to select [Cancel after 1 shot] and use the four-way
controller (45) to select O or P.
RAW/Fx Button
RAW One Push File Format
Cancel after 1 shot
JPEG
RAW
RAW+
RAW+
RAW+
RAW+
MENU
O
P
The recording format returns to the original file format after a picture is taken. (default setting)
The setting is canceled when the following operations are performed.
- the |/Y button is pressed again
- the Q button or 3 button is pressed
- the main switch is turned off
- the mode dial is turned
6
Use the four-way controller (23) to choose a file format.
The left side is the [File Format] setting and the right side is the file format when the |/Y button is pressed.
7
Press the four-way controller
(5), and use the four-way
controller (23) to select a file
format when the |/Y button is pressed.
RAW/Fx Button
RAW One Push File Format
Cancel after 1 shot
JPEG
RAW
RAW+
RAW+
RAW+
RAW+
MENU Cancel OK OK
8
Press the 4 button.
9
Press the 3 button three times.
The screen that was displayed before selecting the menu appears again.
Setting the White Balance
205
White balance is a function for adjusting the color of an image so that white objects appear white. Set the white balance if you are not satisfied with the color balance of pictures taken with white balance set to F (Auto), or to intentionally apply a creative effect to your images.
Item
F Auto
Setting
Automatically adjusts the white balance.
(default setting)
Color Temperature
Approx. 4,000 to
8,000K
G Daylight For use when taking pictures in sunlight.
Approx. 5,200K
H Shade
For use when taking pictures in the shade.
It reduces the bluish color tones in a picture.
Approx. 8,000K
^ Cloudy
J
I
For use when taking pictures on cloudy days. Approx. 6,000K
Fluorescent
Light
Tungsten
Light
For use when taking pictures under fluorescent lighting. Select the type of fluorescent light.
D Fluorescent Light Daylight Color
N Fluorescent Light Daylight White
W Fluorescent Light Cool White
L Fluorescent Light Warm White
For use when taking pictures under light bulbs or other tungsten light. It reduces the reddish color tones in a picture.
Approx. 6,500K
Approx. 5,000K
Approx. 4,200K
Approx. 3,000K
Approx. 2,850K
L
CTE
K
Flash
Manual 1-3
For use when taking pictures using the built-in flash.
Use this to keep and strengthen the color tone of the light source in the image.
Use this to manually adjust the white balance according to the lighting so that white objects appear as a natural white.
You can save three settings.
Approx. 5,400K
-
-
K
Color
Temperature
1~3
Use figures to set the color temperature.
You can save three settings.
-
*1 The color temperatures (K) shown above are all estimates. These do not indicate precise colors.
*2 CTE = Color Temperature Enhancement
White balance is fixed to F when Cross Processing is set.
6
206
1
Press the four-way controller (4) in Capture mode.
The [White Balance] screen appears.
After the power is turned on, the last image taken is displayed in the background.
2
Use the four-way controller
(23) to select the white balance.
White Balance
Auto
6
CTE
K1
MENU Cancel Check
AE.L
OK OK
Available operations
Main switch (|)
L button
Uses Digital Preview to preview the background image with the setting applied.
Saves the background image. Select [Save as] and press the 4 button.
3
Press the 4 button.
The camera is ready to take a picture.
• The camera automatically performs fine-tuning even when the light source is
specified. The color temperature of the light source is fixed when [10. WB
Adjustable Range] is set to [Fixed] in the [A Custom Setting 2] menu (p.91).
• Because the light source changes when a flash discharges, you can set the white balance for when the flash discharges. Select [Auto White Balance],
[Unchanged] or [Flash] in [11. WB When Using Flash] of the [A Custom
Fine-tuning the White Balance
You can fine-tune the white balance setting.
1
Perform the desired settings in Step 2 on p.206.
2
Press the four-way controller (5).
The fine-tuning screen appears.
3
Fine-tune the white balance.
Seven levels (225 patterns) are available on the G-M and B-A axes.
Shade
G1 ±0
±0
MENU Cancel Check OK OK
Available operations
Four-way controller (23) Adjusts the tone of the colors between green
(G) and magenta (M).
Four-way controller (45) Adjusts the tone of the colors between blue (B) and amber (A).
| button Resets the adjustment value.
4
Press the 4 button.
The camera returns to the [White Balance] screen.
5
Press the 4 button.
The camera is ready to take a picture.
6
207
When set to K, the white balance can also be measured by pressing the shutter release button fully (except while recording a movie).
208
Adjusting the White Balance Manually
6
You can adjust the white balance depending on the light source when taking pictures. With the manual white balance, the camera can store delicate shades that cannot be precisely adjusted with the white balance preset values provided in the camera. This provides the optimum white balance for your surroundings. Up to three settings can be saved.
1
Select K in Step 2 on p.206 and press the four-way
controller (5).
2
Use the four-way controller
(23) to select K1 to K3 and press the four-way controller
(5).
White Balance
Manual 1
CTE
1
K1
1
2
3
MENU Cancel
AE.L
OK OK Check
3
Under the light to measure the white balance, fully display a white sheet of paper in the viewfinder or select a white area as the subject.
4
Press the shutter release button fully.
Set the focus mode to \ when the shutter cannot be released.
The screen to select the measuring range is displayed.
5
Use the rear e-dial (S) to select the entire screen or spot area for the measuring range.
MENU Cancel OK OK
6
When a spot area is selected, use the four-way controller
(2345) to move the frame to the position you want to measure.
7
Press the 4 button.
The white balance fine-tuning screen appears when measuring is completed.
Adjust the white balance as necessary.
Manual
White Balance
SHUTTER Adjust
±0 ±0
±0
MENU Cancel
8
Press the 4 button.
The camera returns to the [White Balance] screen.
9
Press the 4 button.
The camera is ready to take a picture.
Check
AE.L
OK OK
209
6
• No image is recorded when the shutter release button is pressed to adjust the white balance.
• The message [The operation could not be completed correctly] appears when measuring is unsuccessful. Press the 4 button while displayed to remeasure the white balance.
• If a picture is extremely overexposed or underexposed, the white balance may not be adjusted. In this case, adjust exposure to the correct amount level before adjusting the white balance.
• When the mode dial is set to C (Movie), the white balance cannot be measured. Adjust the white balance in any exposure mode other than C before recording a movie.
210
Adjusting the White Balance with Color
Temperature
6
Use figures to set the color temperature. Up to three settings can be saved.
1
Select K in Step 2 on p.206 and press the four-way
controller (5).
2
Use the four-way controller (23) to select K1 to K3 and
press the four-way controller (5).
The [Color Temperature] screen appears.
3
Adjust the color temperature with the front or rear e-dial.
Color
Temperature
K1
5000K
±0 ±0
±0
MENU Cancel Check OK OK
Color temperature steps vary depending on the e-dial.
E-dial Kelvin
Front (R) 1 Step (100K)
Rear (S) 10 Steps (1,000K)
Mired
1 Step (20M)
5 Steps (100M)
*1 The default setting for Color Temperature step units is [Kelvin]. You can change the
You can also use the steps in “Fine-tuning the White Balance” (p.207) for
fine-tuning.
4
Press the 4 button.
The settings are saved and the camera returns to the [White Balance] screen.
Turn the main switch to | to display Digital Preview with the set color temperature.
5
Press the 4 button.
The camera is ready to take a picture.
211
Color Temperature
The color of light shifts towards blue as the color temperature rises, and towards red as the color temperature falls. Color temperature describes this change in light color in terms of absolute temperature
(K: Kelvin). This camera is capable of setting the white balance to enable taking pictures with natural coloring under a variety of lighting conditions.
Red tint Blue tint
2000 3000 4000 5000 6000 8000 10000 12000 [ K ]
6
212
Setting the Color Space
You can select a color space to use.
sRGB Sets to sRGB color space. (default setting)
AdobeRGB Sets to AdobeRGB color space.
6
Set in [Color Space] of the [A Rec. Mode 3] menu (p.90).
1 2 3 4 5
D-Range Setting
ISO AUTO Setting
High-ISO NR
Slow Shutter Speed NR
Program Line
Color Space
RAW File Format
ISO
NR
AUTO
NR
AUTO sRGB
MENU Cancel OK OK
The file naming system changes depending on the color space setting as shown below.
For sRGB: IMGPxxxx.JPG
For AdobeRGB: _IGPxxxx.JPG
“xxxx” indicates the file number. This is displayed as a four-digit sequential
Color Space
Color ranges for various input/output devices, such as digital cameras, monitors, and printers, differ. This color range is called the
Color Space.
To recreate different color spaces in different devices, standard color spaces have been proposed. This camera supports sRGB and
AdobeRGB.
sRGB is mainly used for devices such as a computer.
AdobeRGB covers a wider range of color than sRGB and is used for occupational uses such as industrial printing.
An image created in AdobeRGB may appear lighter than an image created in sRGB when output from an sRGB compatible device.
Saving the White Balance Setting of a
Captured Image
You can copy the white balance setting of a captured image and save it as
Manual White Balance. Up to three settings can be saved.
Only the white balance setting of still pictures captured with this camera can be copied. The following images cannot be selected.
- Multi-exposure image
- Index image
- Still pictures captured from a movie
1
In Playback mode, display the image with the white balance setting you want to copy.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select K (Save
as Manual WB) and press the 4 button.
The save confirmation screen appears.
You can turn the front e-dial (R) to select a different image.
4
Use the four-way controller (23) to select a number and press the
4 button.
The white balance setting of the selected image is saved to Manual White Balance and the camera switches to Capture mode. The white balance setting is K
(Manual).
Save as Manual 1
Save as Manual 2
Save as Manual 3
MENU Cancel OK OK
6
213
214
Correcting Images
The camera and lens properties can be automatically adjusted for when taking pictures.
Adjusting Brightness
Adjusts the brightness and reduces the occurrence of overexposed and underexposed areas.
6
D-Range Setting
Expands the dynamic range and enables a more ample gradation expression by the CMOS sensor and reduces the occurrence of overexposed and underexposed areas.
1
Select [D-Range Setting] in the [A Rec. Mode 3] menu and
press the four-way controller (5).
The [D-Range Setting] screen appears.
2
Use the four-way controller (23) to select [Highlight
Correction] and press the four-way controller (5).
3
Use the four-way controller (23) to select [Off] or [On] and press
the 4 button.
D-Range Setting
Highlight Correction
Shadow Correction
Available sensitivity range is currently ISO 100-12800
MENU Cancel
4
Use the four-way controller (23) to select [Shadow
Correction] and press the four-way controller (5).
OK OK
5
Use the four-way controller
(23) to select [Off], [Low],
[Medium] or [High] and press the
4 button.
D-Range Setting
Highlight Correction
Shadow Correction
MENU Cancel OK OK
6
Press the 3 button twice.
The camera is ready to take a picture.
When [Highlight Correction] is set to [On], the minimum sensitivity is set to ISO
200. When [3. Expanded Sensitivity] is set to [On] in the [A Custom Setting 1]
menu (p.91), the minimum sensitivity is set to ISO 160.
HDR Capture
Enables capturing images at high dynamic range. Takes three images
(-3EV underexposed, standard (proper exposure) and +3EV overexposed) to create a single composite image with them.
• HDR Capture is not available in the following situations.
- when the file format is set to [RAW] or [RAW+] (fixed to [JPEG])
- when the exposure mode is set to p (Bulb) or M (Flash X-sync Speed)
• When HDR Capture is set, the following functions are not available.
- Drive modes other than 9 (Single Frame Shooting), g (Self-timer (12s)),
Z (Self-timer (2s)), h (Remote Control) or i (Remote Control (3s delay))
- Interval Shooting or Multi-exposure
- Extended Bracketing, Digital Filter or Cross Processing (The function selected last is used.)
• During HDR Capture, multiple images are combined together to create a single image, so it will take time to save an image.
1
Select [HDR Capture] in the [A Rec. Mode 2] menu and
press the four-way controller (5).
The [HDR Capture] screen appears.
6
215
216
2
Press the four-way controller (5) and use the four-way controller
(23) to select [Off], [Auto],
[Standard], [Strong 1], [Strong 2] or [Strong 3].
HDR Capture
HDR Capture
Auto Align
MENU Cancel
3
Press the 4 button.
4
Use the four-way controller (23) to select [Auto Align] and use the
four-way controller (45) to
select P or O.
HDR Capture
HDR Capture
Auto Align
OK OK
6
MENU
P
O
[Shake Reduction] is fixed to l (Off). Use a tripod to prevent camera shake when taking pictures. (default setting)
The Shake Reduction function operates according to the Shake
Reduction setting at that point. HDR Capture can be used without a tripod.
[Program Line] (p.102) is fixed to l (Hi-speed Priority) and
[AUTO ISO Parameters] (p.97) is fixed to a (Fast).
5
Press the 3 button twice.
The camera is ready to take a picture.
• During HDR Capture, pressing the 3 button while an image is being saved cancels the process and saves the image as a standard image.
• When both [Shake Reduction] and [Auto Align] are set to on, be careful of the following points.
- Make sure to hold the camera firmly so that the composition of the picture does not change while the three images are taken. If there is a great difference of the composition between three images, [Auto Align] may not be possible.
- Images taken with HDR Capture are susceptible to camera shake and blur.
Be sure to set a higher shutter speed and a higher ISO sensitivity.
- When the exposure mode is set to e (Hyper-program), [Program Line] is set to l (Hi-speed Priority).
- When the ISO sensitivity is set to AUTO, the sensitivity can be raised more easily than normal.
- [Auto Align] may not be possible for lenses that have a focal length exceeding 100 mm.
- When the entire subject is checkered or has a uniform surface, [Auto Align] may not be possible.
217
6
218
Lens Correction
Reduces distortions and lateral chromatic aberrations occurring due to lens properties.
Distortion
Distortion is the phenomenon in which the center of the image appears inflated (barrel distortion) or the center of the image appears pinched
(pincushion distortion). Distortion occurs more easily when using a zoom lens or a small diameter lens, and straight walls or the horizon in the image appear curved.
6
Pincushion distortion Barrel distortion
Lateral chromatic aberration
Lateral chromatic aberration is the phenomenon in which the magnification of the image varies according to the colors (wavelengths of light) when a picture was taken, and may cause a blurred image.
Lateral chromatic aberration occurs more easily at shorter focal lengths.
• Corrections can only be made when using DA, DA L, D FA or some FA lenses
(p.337). [Lens Correction] cannot be selected when an incompatible lens is
attached.
• [Distortion Correction] is disabled when using a DA FISH-EYE 10-17mm.
• The Lens Correction function is disabled when using an accessory such as a close-up ring or rear converter that is attached between the camera and the lens.
• When the Lens Correction function is activated, it may take longer to display
Instant Review and the shooting speed for continuous shooting may be slower.
• The effect of the Lens Correction function may be barely noticeable in some cases due to the shooting conditions or other factors.
1
Select [Lens Correction] in the [A Rec. Mode 1] menu and
press the four-way controller (5).
The [Lens Correction] screen appears.
2
Use the four-way controller (23) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj].
3
Press the four-way controller (5) and use the four-way controller
(23) to select [OFF] or [ON].
Lens Correction
Distortion Correction
Lat-Chromatic-Ab Adj
6
219
MENU Cancel OK OK
4
Press the 4 button.
5
Press the 3 button twice.
The camera is ready to take a picture.
When a compatible lens is attached and the file format is set to [RAW] or
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.274)
220
Adjusting the Composition
6
Adjusts the Shake Reduction unit in the X-Y direction or rotation direction for a better composition position and a more level camera. Use this when you want to adjust the composition, such as when using a tripod.
1
Select [Composition Adjust.] in the [A Rec. Mode 2] menu
and press the four-way controller (5).
The [Composition Adjust.] screen appears.
2
Select [Start Adjustment] and
press the 4 button.
Composition Adjust.
Start Adjustment
Recall Previous Position To start adjusting the composition from the previous position, use the four-way controller (23) to select [Recall
Previous Position] and use the four-way controller (45) to switch to O.
Live View is displayed and the composition can be adjusted.
3
Adjust the composition.
The amount of compensation (the number of steps) is displayed at the top right of the screen.
Please note: depending on the lens, adjusting the composition may cause vignetting
MENU OK OK
MENU Cancel OK OK
Available operations
Four-way controller
(2345)
Rear e-dial (S)
| button
Moves the composition up, down, left or right.
Adjust up to 24 steps (approximately ±1.5 mm) on the image sensor.
Adjusts the level of the composition when the amount of adjustment is less than 16 steps (±1.0 mm) up or down, or to the left or right. Up to 8 steps (approximately ±1°) can be adjusted.
Resets the adjustment value.
4
Press the 4 button.
The camera returns to normal Live View and is ready to take a picture.
• The saved adjustment value is reset when Live View is ended.
• When using the composition adjustment function frequently, you can assign
the function to the |/Y button. (p.285)
221
6
222
Setting the Image Finishing Tone
Setting Custom Image
6
You can set the image finishing tone before shooting. Select from the following nine modes for the image finishing tone: Bright (default setting),
Natural, Portrait, Landscape, Vibrant, Muted, Bleach Bypass, Reversal
Film and Monochrome. You can adjust the following parameters.
Parameter
Saturation
Hue
High/Low
Key Adj
Contrast
Sharpness
Filter Effect
Toning
Setting
Sets the color saturation.
• Not available when [Reversal Film] or
[Monochrome] is selected.
Sets the color.
• Not available when [Bleach Bypass],
[Reversal Film] or [Monochrome] is selected.
Changes the brightness of the image.
• Not available when [Reversal Film] is selected.
Sets the image contrast.
• Not available when [Reversal Film] is selected.
Sets the sharpness of the image outlines.
You can switch to [Fine Sharpness] or
[Extra Sharpness], which makes image outlines even thinner and sharper. (Not available when the exposure mode is set to C (Movie).)
Changes the contrast to appear as if a
B&W color filter was used. Set the filter color.
• Available only when [Monochrome] is selected.
Sets a color tone for [Bleach Bypass].
Sets the level for cold tone adjustment
(- direction) and warm tone adjustment
(+ direction) for [Monochrome].
• Available only when [Bleach Bypass] or
[Monochrome] is selected.
Setting Values
-4 to +4
-4 to +4
-4 to +4
-4 to +4
-4 to +4
None/Green/Yellow/
Orange/Red/Magenta/
Blue/Cyan/Infrared
Filter
Bleach Bypass: Off/
Green/Yellow/Orange/
Red/Magenta/Purple/
Blue/Cyan
Monochrome: -4 to +4
Image finishing tone is fixed to [Bright] and the parameters cannot be changed in the following conditions.
- when the exposure mode is set to B (Green)
- when Cross Processing is set
1
Press the four-way controller (5) in Capture mode.
The screen to select a custom image appears.
After the power is turned on, the last image taken is displayed in the background.
2
Use the four-way controller (45) to select an image finishing tone.
223
3
Use the four-way controller (23) to choose a parameter you want to change.
MENU Cancel
AE.L
Check OK OK
6
MENU Cancel
AE.L
Check OK OK
4
Use the four-way controller (45) to change the setting.
The background image changes according to the settings.
You can visually check the saturation and hue with the radar chart.
224
Available operations
Front e-dial (R)
Rear e-dial (S)
| button
Main switch (|)
L button
Switches between enabling and disabling contrast settings.
Switches between [Sharpness], [Fine Sharpness] and [Extra Sharpness]. When set to [Fine
Sharpness] or [Extra Sharpness], image outlines can be captured with more detail.
Resets the set value.
Uses Digital Preview to preview the background image with the setting applied. (Not available during
Live View.)
Saves the background image. Select [Save as] and press the 4 button. (Not available during Live
View.)
5
Press the 4 button.
The camera is ready to take a picture.
6
Setting Cross Processing
Cross processing is the procedure of deliberately processing a film in the wrong type of chemicals to create an image with different colors and contrast. This camera features digital cross processing, which is done internally.
• When Cross Processing is set, the file format is fixed to [JPEG] and cannot be changed. You cannot use Cross Processing when the file format is set to
[RAW] or [RAW+].
• When Cross Processing is set, the following functions and operation are not available.
- Multi-exposure
- Extended Bracketing or HDR Capture (The function selected last is used.)
- Changing the settings of White Balance and Custom Image
1
Select [Cross Processing] in the [A Rec. Mode 2] menu
and press the four-way controller (5).
When the exposure mode is set to C (Movie), select from [Movie] in the
The [Cross Processing] screen appears.
2
Press the four-way controller (5) and use the four-way controller
(23) to select an item and press
the 4 button.
Cross Processing
Cross Processing
Save Settings
Select from [Off], [Preset 1-3], [Random] and [Favorite 1-3].
MENU Cancel OK OK
3
Press the 3 button twice.
The camera is ready to take a picture.
6
225
226
Saving the Cross Processing Setting of a Captured Image
The outcome of cross processing varies each time a picture is taken. If you are able to take a cross processed image that you like, you can save the
Cross Processing settings used in that image. A total of 3 Cross
Processing settings can be saved for still pictures and movies.
To save Cross Processing setting for movies, set from [Movie] in the [A Rec.
Mode 4] menu with the mode dial set to C (Movie).
6
1
Use the four-way controller
(23) to select [Save Settings] in
four-way controller (5).
Cross Processing
Cross Processing
Save Settings
The camera will search for cross processed images starting from the most recent image taken. (An hourglass icon is displayed while searching.) When a cross
MENU processed image is found, the screen to save the settings appears.
If there are no cross processed images, the message [No cross processed image] appears.
2
Turn the front e-dial (R) to select a cross processed image.
Save as Favorite 1
Save as Favorite 2
Save as Favorite 3
MENU Cancel OK OK
3
Use the four-way controller (23) to select [Save as
Favorite 1], [Save as Favorite 2] or [Save as Favorite 3] and
press the 4 button.
The setting of the selected image is saved to [Favorite 1 - 3].
4
Press the 3 button twice to finish saving.
Storing Frequently Used Settings
You can save the current camera settings in the A mode and easily retrieve them.
The following settings can be stored.
• Exposure Mode (other than B and C) • High-ISO NR
• Drive Mode • Slow Shutter Speed NR
• Flash Mode/Flash Exposure Compensation • D-Range Setting
• White Balance
• Sensitivity/ISO AUTO Setting
• HDR Capture
• Custom Image
• EV compensation value
• Program Line
• Exposure Bracketing
• Extended Bracketing (Bracketing Amount/Type)
• Cross Processing
• Digital Filter
• Shake Reduction/
Horizon Correction
• JPEG Recorded Pixels
• JPEG Quality
• File Format
• RAW File Format
• AUTO AF Point Setting
• Lens Correction
• Color Space
• E-Dial Programming/
Button Customization
• [A Custom Setting 1-4] menu settings
6
The A mode cannot be set when the mode dial is set to B (Green) or C
(Movie) mode.
Saving the Settings
Saves the settings to A. Up to five different settings can be saved.
1
Make the necessary settings.
2
Select [Save USER Mode] in the [A Rec. Mode 5] menu
and press the four-way controller (5).
The [Save USER Mode] screen appears.
227
228
3
Use the four-way controller
(23) to select [Save Settings] and press the four-way controller
(5).
The [Save Settings] screen appears.
Save USER Mode
Save Settings
Rename USER Mode
Check Saved Settings
Reset USER Mode
6
5
Press the four-way controller (2) to select [Save] and press the
4 button.
The settings are saved and the camera returns to the [Save USER Mode] screen.
MENU
4
Use the four-way controller
(23) to select [A1] to [A5] and press the four-way controller
(5).
Save Settings
USER1
USER1
USER2 USER2
USER3
USER3
USER4 USER4
USER5 USER5
MENU
USER1 Save Settings
Saves current settings in
USER1 custom mode
Save
Cancel
MENU OK OK
Editing a Setting Name
You can change the name of the A mode in which you saved settings.
1
Select [Rename USER Mode] in Step 3 of “Saving the
Settings” and press the four-way controller (5).
The [Rename USER Mode] screen appears.
2
Use the four-way controller (23) to select [A1] to
[A5] and press the four-way controller (5).
The text-entry screen appears.
3
Enter the text.
Up to 18 single-byte alphanumeric characters and symbols can be entered.
Text selection cursor
Text input cursor
USER1 Rename USER Mode
Finish
USER1
Delete One Character
MENU Cancel OK Enter
Available operations
Four-way controller
(2345)
Rear e-dial (S)
| button
4 button i button
Moves the text selection cursor.
Moves the text input cursor.
Switches between upper and lower case letters.
Enters a character selected with the text selection cursor at the position of the text input cursor.
Deletes a character at the position of the text input cursor.
4
After entering the text, move the text selection cursor to
[Finish] and press the 4 button.
The name is changed.
Repeat Steps 2 to 4 to change the names of other A modes.
5
Press the 3 button.
229
6
Checking the Saved USER Settings
1
Select [Check Saved Settings] in Step 3 of “Saving the
Settings” (p.227) and press the four-way controller (5).
The [Check Saved Settings] screen appears.
2
Use the four-way controller (23) to select [A1] to
[A5] and press the four-way controller (5).
The current settings saved in the selected A mode are displayed.
230
3
Press the 4 button.
The camera returns to the [Save USER
Mode] screen.
USER1 USER1
P 2.0x5
ISO
AUTO
AWB
200-800
G1 A1
-0.5
+1.0
WB
JPEG 16
M
MENU
AdobeRGB
ISO
NR
AUTO
NR
ON
BA ±1
± 0
± 0
± 0
± 0
± 0
± 0
± 0
OK OK
Using Saved USER Settings
6
You can easily retrieve saved settings.
1
Set the mode dial to A.
The A mode guide appears.
2
Use the four-way controller
(45) or the rear e-dial (S) to
select [A1] to [A5].
Use the four-way controller (23) to check the saved settings.
The saved settings are retrieved.
USER1
P
USER1
RAW
AF
RAW
Cancel AF
09/09/2010
P
10:30AM
Tv
Av
3
Change the settings as necessary.
The exposure mode can be changed in
[Exposure Mode] of the [A Rec. Mode 1] menu.
1 2 3 4
P
USER Mode
Exposure Mode
File Format
JPEG Recorded Pixels
JPEG Quality
AUTO AF Point Setting
Lens Correction
MENU Cancel
Av
TAv
M
B
X
OK OK
4
Take a picture.
• The A mode guide appears for 30 seconds regardless of the [Guide
Display] setting in the [R Set-up 1] menu.
• [A1] to [A5] can also be selected from [USER Mode] in the [A Rec. Mode
1] menu.
• [USER Mode] and [Exposure Mode] are displayed in the [A Rec. Mode 1] menu only when the mode dial is set to A.
• The settings changed in Step 3 are not saved as A mode settings. When the camera is turned off, settings return to the original saved settings.
ABCDEFGHIJKLMNOPQR
USER Mode
Exposure Mode
File Format
JPEG Recorded Pixels
JPEG Quality
AUTO AF Point Setting
Lens Correction
MENU Cancel
USER3
USER4
USER5
OK OK
231
Changing the Settings
Changes the settings saved in A1 to A5.
1
Perform Steps 1 to 3 of “Using Saved USER Settings”
2
Perform Steps 2 to 5 of “Saving the Settings” (p.227).
The settings are changed and resaved.
6
232
Resetting to Default Settings
6
Resets the settings saved in A1 to A5 to the default settings.
1
Select [Reset USER Mode] in Step 3 of “Saving the
Settings” (p.227) and press the four-way controller (5).
The [Reset USER Mode] screen appears.
2
Use the four-way controller (23) to select [A1] to
[A5] and press the four-way controller (5).
3
Press the four-way controller (2) to select [Reset] and press the
4 button.
The A mode settings return to the default values.
USER1 Reset USER Mode
Resets USER1 custom mode to default settings and name
Reset
Cancel
MENU OK OK
7
Playback Functions
This chapter describes how to use the various playback functions in Playback mode.
Playback Functions Operation ..........................234
Setting the Playback Display Method ...............236
Enlarging Images ...............................................237
Displaying Multiple Images ...............................238
Playing Back Images Continuously ..................246
Rotating Images .................................................249
Deleting Multiple Images ...................................250
Protecting Images from Deletion (Protect) ......254
Connecting the Camera to an AV Device .........256
234
Playback Functions Operation
Make settings related to playing back images in the playback mode palette or [Q Playback] menu.
Refer to “Using the Menus” (p.42) for details on how to use the menus.
Playback Mode Palette Setting Items
Press the four-way controller (3) in
Playback mode to display the playback mode palette.
You can display the playback mode palette even when a movie is paused.
7
Image Rotation
Item s Image Rotation
D Digital Filter
n Resize
o Cropping
u Slideshow
Rotates captured images.
Useful for image playback on
TV and other display devices
MENU Exit OK OK
Rotates images.
Function Page
Changes the color tone of images, adds softening and slimming effects, or adjusts the brightness.
Changes the number of recorded pixels and quality level of the captured image and saves it as a new file.
Cuts out only the desired area of the picture and saves it as a new image.
Plays back the images one after another. p.246
K h p g
Z
Item
Save as Manual WB
RAW Development
Protect
Function Page
You can copy the white balance setting of a captured image and save it as
Manual White Balance.
Converts RAW images to JPEG format.
Joins a number of images together and creates a new image with them.
Displays two images side-by-side.
Divides a movie and extracts segments from it. p.179
Protects images from being accidentally erased.
Sets the DPOF settings.
r DPOF
*1 This cannot be performed when a movie is displayed.
*2 This cannot be performed when a RAW image is displayed.
*3 This can be performed only when a movie is displayed.
235
Playback Menu Setting Items
You can perform the following settings in the
[Q Playback] menu.
Press the 3 button in Playback mode to display the [Q Playback 1] menu.
7
Menu
Q 1
Item
Slideshow
Quick Zoom
Bright/Dark Area
Auto Image Rotation
Delete All Images
Function
Plays back the images one after another.
You can set how images will be displayed in the slideshow.
Page
Sets the initial magnification when enlarging images.
Sets whether or not to display the Bright/
Dark Area warning during playback.
Sets whether to rotate images shot with the camera held vertically when playing back.
You can delete all saved images at once. p.253
236
Setting the Playback Display Method
7
You can set the initial magnification when enlarging images, whether to display the Bright/Dark Area warning, and whether to automatically rotate images that are shot with the camera held vertically in Playback mode.
1
Select [Quick Zoom] in the [Q Playback 1] menu and
press the four-way controller (5).
2
Use the four-way controller (23) to select the magnification and
press the 4 button.
Select from [Off] (default setting), [×2],
[×4], [×8], [×16] or [×32].
1
Slideshow
Quick Zoom
Bright/Dark Area
Auto Image Rotation
Delete All Images
Off
X2
X4
X8
X16
X32
OK OK MENU Cancel
3
Use the four-way controller (23) to select [Bright/Dark Area] and
use the four-way controller (45)
to select O or P.
1
Slideshow
Quick Zoom
Bright/Dark Area
Auto Image Rotation
Delete All Images
Off
MENU Exit
4
Use the four-way controller (23) to select [Auto Image
Rotation] and use the four-way controller (45) to select
O or P.
O
During playback, the image is automatically rotated based on the
rotation information when [23. Saving Rotation Info] in the [A Custom
Setting 3] menu (p.92) is set to [On] or image rotation information is
saved in [Image Rotation] (p.249). (default setting)
P The image is not automatically rotated during playback.
5
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Enlarging Images
Images can be magnified up to 32 times in Playback mode.
1
Use the four-way controller (45) to select an image in Playback mode.
2
Turn the rear e-dial (S) to the
right (toward y).
The image enlarges at each click (1.2 times to 32 times).
JPEG 1/ 2000 F5.6
ISO 200
Available operations
Four-way controller (2345)
Rear e-dial (S) to the right (y)
/m button
Rear e-dial (S) to the left (f)
/| button
4 button
Front e-dial (R)
Moves the area to enlarge.
Enlarges the image (up to 32 times).
Reduces the image (up to 1.2 times*).
M button
Returns to the original size.
Retains the magnification and the position of the magnified area and shows the previous/next image.
Switches information display on/off.
*The default setting for the first click (minimum magnification) is 1.2 times. You can
change this in [Quick Zoom] of the [Q Playback 1] menu. (p.236)
• You can enlarge the image by following the same procedure during Instant
Review (p.73), Digital Preview (p.138) or Live View (p.168).
• The initial full display of vertical images is displayed with a magnification of
0.675 times that of horizontal images, therefore, magnification at the first click starts at 1.0 times.
7
237
238
Displaying Multiple Images
Multi-image Display Screen
You can display 4, 9, 16, 36 or 81 thumbnail images on the monitor at the same time. The default setting is nine image-display.
1
Turn the rear e-dial (S) to the
left (toward f) in Playback mode.
7
The multi-image display screen appears.
Up to nine thumbnail images are displayed at once.
Selection frame
INFO 100-0001
Scroll bar
Available operations
Four-way controller
(2345)
M button
Moves the selection frame.
Displays the [Multi-img Display Setting] screen. Use the four-way controller (45) to select the number of images to display at the same time.
239
Multi-img Display Setting
Display Type i button
MENU Cancel INFO OK OK
(Display Type cannot be selected when
developing multiple RAW images (p.272).)
Selects multiple images and deletes them.
2
Press the 4 button.
A full screen display of the selected image appears.
Icons such as C and ? are not displayed with thumbnail images for 81-image display.
7
Displaying Images by Folder
Images will be grouped and displayed by folder in which they are saved.
1
In the multi-image display
screen, turn the rear e-dial (S)
to the left (toward f) again.
The folder display screen appears.
240
2
Select the folder you want to display.
The number of images saved in the selected folder appears at the top right of the screen.
100
103
101
104
12345
102
105
100_0105
Available operations
(
Four-way controller
2345 ) i button
Moves the selection frame.
Deletes the selected folder and all the images in it. (p.252)
3
Press the 4 button.
The multi-image display screen for the selected folder appears.
Displaying Images by the Shooting Date
(Calendar Display)
7
Images will be grouped and displayed by the shooting date.
1
In the multi-image display
screen, press the M button.
The [Multi-img Display Setting] screen appears.
2
Press the M button again.
Multi-img Display Setting
Display Type
MENU Cancel INFO OK OK
The calendar display screen appears.
Only the dates when pictures were taken are displayed.
Number of images shot on this date
2/5
2010.
WED
9
22
FRI
MON
24
27
2010.
10
THU
WED
SAT
7
10
13
16
Delete INFO
Shooting Thumbnail
Available operations
Four-way controller (23) Selects a shooting date.
Four-way controller (45) Selects an image taken on the selected shooting date.
Rear e-dial (S) to the right (y)
M button i button
Displays the selected image. Turn to the left
(f) to return to the calendar display.
The camera returns to the multi-image display screen.
Deletes selected images.
3
Press the 4 button.
A full screen display of the selected image appears.
241
7
Comparing Images
You can display two images side-by-side.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select g (Image
Comparison) and press the 4 button.
The last image displayed will be displayed twice side-by-side.
242
3
Select two images you want to compare using the e-dials and compare them at left and right.
7
OK MENU
Available operations
4 button
Four-way controller
(2345)
| button
Front e-dial (R)
Rear e-dial (S)
M button i button
Moves the selection frame to the right image, both images, and left image each time the button is pressed.
Moves the area to enlarge. When the selection frame is placed on both images, you can manipulate both images at the same time.
Returns a position of the enlarged area to the center.
When the selection frame is placed on the left or right image, the previous or next image is displayed.
Enlarges or reduces the image. When the selection frame is placed on both images, you can manipulate both images at the same time.
Switches information display On/Off.
When the selection frame is placed on the left or right image, the selected image is deleted.
4
Press the 3 button.
The camera returns to the normal playback mode.
Joining Multiple Images (Index)
Join a number of images together and display them as an index print. You can also save the displayed index print as a new image. You can select the images to include in the index print or have them randomly-arranged.
This function is not available for movies.
243
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select p (Index)
and press the 4 button.
The [Index] screen appears.
3
Press the four-way controller (5).
4
Use the four-way controller (23) to select a layout and press the
4 button.
You can select o (Thumbnail), p (Square), q (Random1), r (Random2), s (Random3) or p (Bubble).
Index
Layout
Images
Backgrnd.
Selection
Create an index image
Images are displayed according to the file number (from the smallest number) for
MENU Cancel o , and are displayed in random order for other layouts.
OK OK
5
Use the four-way controller (23) to select [Images] and
press the four-way controller (5).
6
Use the four-way controller (23) to select the number of images
and press the 4 button.
You can select 12, 24 or 36 images.
When the number of saved images is smaller than the number selected, empty spaces will appear when [Layout] is set to o and some images may be duplicated for other layouts.
Index
Layout
Images
Backgrnd.
Selection
12
24
36
Create an index image
MENU Cancel OK OK
7
244
7
Use the four-way controller (23) to select [Backgrnd.]
and press the four-way controller (5).
8
Use the four-way controller (23) to select the background color
and press the 4 button.
You can select a white or black background.
Index
Layout
Images
Backgrnd.
Selection
12
Create an index image
MENU Cancel OK OK
9
Use the four-way controller (23) to select [Selection] and
press the four-way controller (5).
10
Use the four-way controller (23) to select a type of image
selection and press the 4 button.
Index
Layout
Images
Backgrnd.
Selection
12
7
Create an index image
MENU Cancel OK OK u All images w Manual x Folder name
Picks images automatically from all of the images saved.
Individually select images you want to include in the index. Continue by selecting [Select image(s)] and select the individual images.
Picks images automatically from the folder selected. Continue by selecting [Select a folder] and select the folder.
11
Use the four-way controller (23) to select [Create an index image]
and press the 4 button.
The index image is created and a confirmation screen appears.
Index
Layout
Images
Backgrnd.
Selection
12
Create an index image
MENU OK OK
12
Use the four-way controller (23) to select [Save] or [Reshuffle]
and press the 4 button.
Save
Reshuffle
Cancel
MENU OK OK
Save
Reshuffle
The index image is saved as a P and C file.
Reselects the images to be included in the index and displays a new index image. However, if [Thumbnail] is selected for [Layout], this item is not displayed.
After the index image is saved, the camera returns to Playback mode and the index image is displayed.
Processing may take a while when creating an index image.
245
7
246
Playing Back Images Continuously
You can play back all images saved on your SD Memory Card successively in the slideshow.
Setting the Slideshow Display
7
Sets how images will be displayed during the Slideshow.
1
Select [Slideshow] in the [Q Playback 1] menu and press
the four-way controller (5).
The screen to make the slideshow settings appears.
2
Use the four-way controller
(23) to select an item you want to change.
Slideshow starts
Start
The following items can be changed.
Interval
Screen Effect
Repeat Playback
3sec.
MENU OK OK
Item
Interval
Screen
Effect
Repeat
Playback
Description
Select an image display interval.
Select a transition effect when the next image is displayed.
Set whether to start the slideshow again from the beginning after the last image is displayed.
Setting
3sec. (default setting)/
5sec./10sec./30sec.
Off (default setting)/Fade/
Wipe/Stripe
P (default setting)/O
3
Press the four-way controller (5) and use the four-way controller
(23) to change the setting and
press the 4 button.
Start
Interval
Screen Effect
Repeat Playback
MENU Cancel
3sec.
5sec.
10sec.
30sec.
OK OK
247
Starting the Slideshow
1
Select [Start] in Step 2 on p.246 and press the 4 button.
Or, select u (Slideshow) in the playback mode palette
and press the 4 button.
The start screen is displayed and the slideshow begins.
Start
OK
7
Available operations
4 button
Four-way controller (4)
Four-way controller (5)
Four-way controller (3)
Pauses playback. Press again to resume playback.
Shows the previous image.
Shows the next image.
Stops playback.
248
2
Stop the slideshow.
Slideshow ends when one of the following operations is performed during playback or pause.
- the four-way controller (3) is pressed
- the Q button is pressed
- the 3 button is pressed
- the shutter release button is pressed halfway or fully
*2
- the mode dial is turned
- the = button is pressed
- the main switch is turned to |
*1 After slideshow ends, the camera switches to normal Playback mode.
*2 After slideshow ends, the camera switches to Capture mode.
For movies, only the first frame is displayed and then the next image is displayed after the set interval has elapsed. To play a movie during a slideshow, press the 4 button while the first frame is displayed. After the movie has finished playing, the slideshow will resume.
7
Rotating Images
When pictures are taken with X held vertically, the vertical position sensor activates and rotation information is added to the image to enable playback with the correct image orientation. You can change the rotation information and save the image using the following procedure.
• When [23. Saving Rotation Info] in the [A Custom Setting 4] menu (p.92) is
set to [Off], the image rotation information is not saved when shooting.
• When [Auto Image Rotation] (p.236) in the [Q Playback 1] menu is set to O
(On), an image with rotation information is automatically rotated during playback.
You cannot change the image rotation information in the following conditions.
- when the image is protected
- when the image rotation information tag is not saved with the image
- when [Auto Image Rotation] (p.236) in the [Q Playback 1] menu is set to
P (Off)
1
Select the image you want to rotate in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select s (Image
Rotation) and press the 4 button.
The selected image is rotated in 90° increments and the four thumbnail images are displayed.
4
Use the four-way controller
(2345) to select a desired rotation direction and press the
4 button.
The image rotation information is saved.
7
MENU Cancel OK OK
249
250
Deleting Multiple Images
Deleting Selected Images
You can delete multiple images in the multi-image display at once.
Deleted images cannot be restored.
• Protected images cannot be deleted.
• You can select up to 100 images at a time.
1
Turn the rear e-dial (S) to the
left (toward f) in Playback mode.
The multi-image display screen appears.
7
2
Press the i button.
The screen to select the images to delete is displayed.
The screen temporarily changes to 36image display when [Multi-img Display
Setting] (p.239) is set to 81-image
display.
3
Select the images to delete.
INFO 100-0001
MENU Delete OK
Available operations
Four-way controller
(2345)
4 button
Moves the selection frame.
Rear e-dial (S)
Adds O and selects an image. Press again to return to P. Protected images (Z) cannot be selected.
Displays a full screen display of the image selected with the selection frame. When the image is displayed full screen, press the four-way controller (45) to display the previous or next image.
4
Press the i button.
The delete confirmation screen appears.
5
Press the four-way controller (2) to select [Select & Delete].
All selected images will be deleted
251
Select&Delete
Cancel
MENU OK OK
7
6
Press the 4 button.
The selected images are deleted.
252
Deleting a Folder
You can delete a selected folder and all the images in it.
1
Turn the rear e-dial (S) two
clicks to the left (toward f) in
Playback mode.
The folder display screen appears.
2
Use the four-way controller
(2345) to select a folder to
delete and press the i button.
The delete folder confirmation screen appears.
100
103
101
104
12345
102
105
100_0105
7 3
Press the four-way controller (2) to select [Delete].
100_0105
All images in selected folder will be deleted
Delete
Cancel
OK OK
4
Press the 4 button.
The selected folder and all images in it are deleted.
The confirmation screen appears when there are protected images. Use the fourway controller (23) to select [Delete All] or [Leave All] and press the 4 button.
When [Delete All] is selected, protected images are also deleted.
3image(s)
Protected images are found
Delete All
Leave All
OK OK
Deleting All Images
You can delete all saved images at once.
Deleted images cannot be restored.
1
Select [Delete All Images] in the [Q Playback 1] menu
and press the four-way controller (5).
The confirmation screen for deleting all images is displayed.
2
Press the four-way controller (2) to select [Delete All Images].
All images will be deleted from memory
Delete All Images
Cancel
OK OK
3
Press the 4 button.
All images are deleted.
The confirmation screen appears when there are protected images. Use the fourway controller (23) to select [Delete All] or [Leave All] and press the 4 button.
When [Delete All] is selected, protected images are also deleted.
3image(s)
Protected images are found
Delete All
Leave All
OK OK
7
253
254
Protecting Images from Deletion
(Protect)
You can protect images from being accidentally deleted.
Even protected images are deleted if the inserted SD Memory Card is formatted.
Protecting a Single Image
7
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select
Z (Protect) and press the 4 button.
The screen to select the protection setting method is displayed.
3
Use the four-way controller (23) to select [Single Image] and
press the 4 button.
Single Image
All Images
OK OK MENU
4
Use the four-way controller (45) to select an image to protect.
5
Press the four-way controller (2) to select [Protect].
Select [Unprotect] to cancel the protection of the image.
Protect
Unprotect
MENU OK OK
6
Press the 4 button.
The image is protected and the Y icon appears at the top right of the screen.
Repeat Steps 4 to 6 to protect other images.
7
Press the 3 button.
The camera returns to Playback mode.
255
Protecting All Images
1
Select [All Images] in Step 3 on p.254 and press the 4
button.
2
Press the four-way controller (2) to select [Protect] and press the
4 button.
All images saved on the SD Memory Card are protected.
Select [Unprotect] to cancel the protection of all images.
MENU
Protects all images
Protect
Unprotect
OK OK
7
256
Connecting the Camera to an AV
Device
You can connect the camera to a TV or other device with a video input terminal or HDMI terminal and play back images.
• If you intend to use the camera continuously for a long period, use of the AC
adapter kit K-AC50 (optional) is recommended. (p.53)
• For an AV device with multiple video input terminals, check the operating manual of the AV device, and select a suitable video input terminal for connecting the camera.
• You cannot output composite and HDMI video at the same time.
• You cannot adjust the volume on the camera while the camera is connected to the AV device. Adjust the volume on the AV device.
• If you want to view a movie on an external monitor while recording it, connect the camera to an AV device with the mini HDMI terminal. You cannot output a movie using the video input terminal while recording.
Connecting the Camera to a Video Input Terminal
7
Use the provided AV cable I-AVC7 to connect the camera to a device with a video input terminal.
1
Turn the AV device and camera off.
2
Open the terminal cover, face the arrow on the AV cable
toward the 2 mark on the camera, and connect the cable to the PC/AV terminal.
3
Connect the other end of the AV cable to the video input terminal on the AV device.
4
Turn the AV device and camera on.
The camera turns on in video mode, and the camera information is displayed on the screen of the connected AV device.
Even if you used an external microphone to record movie sound in stereo, monaural sound is played back.
Selecting the Video Output Format
When the hometown is set at the time of initial setting (p.63), the video
output format is set in accordance with that region. Depending on the country or region, images may fail to be played back with the set video output format. If this happens, change the video output format setting.
1
Select [Video Out] in the [R Set-up 2] menu and press the
four-way controller (5).
2
Use the four-way controller (23) to select [NTSC] or [PAL] and
press the 4 button.
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name
Create New Folder
MENU Cancel
±0
NTSC
PAL
MSC
Date
OK OK
3
Press the 3 button.
The video output format is set.
7
The video output format differs depending on the region. When you set [Setting
the Time] in the World Time setting (p.289) to X (Destination), the video output
setting changes to the video output format for that city.
257
258
Connecting the Camera to an HDMI Terminal
Use a commercially available HDMI cable to connect the camera to a device with an HDMI terminal.
1
Turn the AV device and camera off.
2
Open the terminal cover and connect the HDMI cable to the mini HDMI terminal.
7
3
Connect the other end of the HDMI cable to the HDMI input terminal on the AV device.
4
Turn the AV device and camera on.
The camera turns on in HDMI mode, and the camera information is displayed on the screen of the connected AV device.
• The camera has a mini HDMI terminal (Type C). Use a commercially available HDMI cable that matches your AV device.
• Nothing is displayed on the camera monitor during HDMI output.
• If you used an external microphone to record movie sound in stereo, the sound is played back in stereo.
Selecting the HDMI Output Format
Set the output signal format of the HDMI terminal.
1
Select [HDMI Out] in the [R Set-up 2] menu and press the
four-way controller (5).
2
Use the four-way controller (23) to select the HDMI output format.
Auto
1080i
720p
480p
The maximum size corresponding to the AV device and camera is automatically selected.
(default setting)
1920×1080i
1280×720p
720×480p
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name
Create New Folder
MENU Cancel
±0
NTSC
Auto
720p
OK OK
*1 This depends on the selected video output format; [480p] for NTSC and [576p]
(720×576p) for PAL.
3
Press the 4 button.
4
Press the 3 button.
The HDMI output format is set.
7
259
• When the HDMI output format is set to [1080i] or [720p], the display of the AV device may appear with a screen design that differs from that displayed on the camera.
• The Bright/Dark Area warning is not displayed during Live View.
• When the exposure mode is set to C (Movie), the output format is fixed to
[480p] regardless of the HDMI output format setting.
260
Memo
8
Processing Images
This chapter describes how to process pictures taken and edit RAW images.
Changing the Image Size ...................................262
Processing Images with Digital Filters .............265
Developing RAW Images ...................................271
262
Changing the Image Size
Changes the number of recorded pixels and quality level of the image, and saves the image as a new file.
Changing the Number of Recorded Pixels and
Quality Level (Resize)
Changes the number of recorded pixels and quality level of the selected image and saves it as a new image. The number of recorded pixels can be reduced while still obtaining an image with good quality.
8
• Only JPEG files captured with this camera can be resized.
• You cannot select a larger resolution than that of the original image.
• Images already resized to S or Z with this camera cannot be resized.
1
Select an image to resize in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select n (Resize) and press the 4 button.
The screen to select the recorded pixels and quality level appears.
4
Use the four-way controller (45) to select the desired image size.
You can select one of the image sizes starting from one size smaller than that of the original image. The selectable sizes vary according to the original image size and aspect ratio.
MENU
16
M
10
M
OK OK
5
Press the four-way controller (3) and use the four-way
controller (45) to select the quality level.
You can select Z, C, D or E.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as] and press the
4 button.
The resized image is saved as a new image.
Save as
Cancel
MENU OK OK
Cutting Out Part of the Image (Cropping)
Cuts out only the desired area of the selected image and saves it as a new image.The aspect ratio can also be changed.
• Only JPEG and RAW files captured with this camera can be cropped.
• Images already resized to S or Z with this camera cannot be cropped.
1
Select an image to crop in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select o (Cropping) and press the 4 button.
The cropping frame to specify the size and position of the area to crop appears on the screen.
8
263
264
4
Specify the size and position of the area to crop by using cropping frame.
MENU INFO
3:2
OK
Available operations
Rear e-dial (S)
Four-way controller
(2345)
M button
Changes the size of the cropping frame.
Moves the cropping frame.
Changes the aspect ratio. Select from [3:2], [4:3],
[16:9] or [1:1]. The image can also be rotated from -45° to +45° in increments of 1°.
Aspect Ratio
Image Rotation
3:2
±0°
8
MENU
| button Rotates the cropping frame in 90° increments.
| appears only when the cropping frame can be rotated.
5
Press the 4 button.
The save confirmation screen appears.
6
Use the four-way controller (23) to select [Save as] and press the
4 button.
The cropped image is saved as a new image.
Save as
Cancel
MENU OK OK
Processing Images with Digital
Filters
265
You can edit captured images using digital filters.
The following filters are available.
Filter Name
Toy Camera
Retro
High
Contrast
Effect
Creates an image that looks as though it was shot with a toy camera.
Creates an image with the look of an old photo.
Parameter
Shading Level: +1 to +3
Blur: +1 to +3
Tone Break: Red/Green/Blue/Yellow
Toning (B-A): 7 levels
Frame Composite: None/Thin/
Medium/Thick
Enhances the contrast in the image.
+1 to +5
Sketch Filter
Creates an image that looks as though it was drawn with a pencil.
Contrast: Low/Medium/High
Scratch Effect: OFF/ON
Water Color
Pastel
Posterization
Miniature
Base
Parameter
Adj
Monochrome
Creates an image that looks as though it was painted.
Blurs part of the image to create a fake miniature scene.
Adjusts the parameters to create the desired image.
Creates a monochrome image such as a black-andwhite photo.
Intensity: +1 to +3
Saturation: OFF/Low/Medium/High
Creates an image that looks as though it was drawn with a crayon.
Lessens the tone of the image to create an image that looks as though it was hand-drawn.
Weak/Medium/Strong
+1 to +5
In-Focus Plane: -3 to +3
In-Focus Width: Narrow/Middle/Wide
In-Focus Plane Angle: Side/Vertical/
Positive Slope/Negative Slope
Blur: +1 to +3
Brightness: -8 to +8
Saturation: -3 to +3
Hue: -3 to +3
Contrast: -3 to +3
Sharpness: -3 to +3
Filter Effect: OFF/Red/Green/Blue/
Infrared Filter
Toning (B-A): 7 levels
8
266
8
Filter Name
Color
Extract
Color
Soft
Starburst
Fish-eye
Slim
HDR
Custom
Filter
Effect
Adds a color filter to the image. Select from 18 filters
(6 colors × 3 tones).
Extracts two specific colors and shoots the rest of the image in black and white.
Parameter
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Density: Light/Standard/Dark
Extracted Color 1: Red/Magenta/
Blue/Cyan/Green/Yellow
Extractable Range of Color 1: -2 to +2
Extracted Color 2: Red/Magenta/
Blue/Cyan/Green/Yellow/OFF
Extractable Range of Color 2: -2 to +2
Soft Focus: +1 to +3 Creates an image with a soft focus throughout the image.
Shadow Blur: OFF/ON
For taking pictures of night scenes or lights reflected on water with a special sparkling look by adding extra glitter to the highlights.
Shape: Cross/Star/Snow Crystal/
Heart/Musical Note
Effect Density: Small/Medium/Large
Size: Small/Medium/Large
Angle: 0°/30°/45°/60°
Creates an image that looks as though it was shot with a fish-eye lens.
Changes the horizontal and vertical ratio of images.
Creates an image that looks like a high dynamic range image.
Weak/Medium/Strong
-8 to +8
Weak/Medium/Strong
Customize and save a filter to your own preferences.
High Contrast: OFF/+1 to +5
Soft Focus: OFF/+1 to +3
Tone Break: OFF/Red/Green/Blue/
Yellow
Shading Type: 6 types
Shading Level: -3 to +3
Distortion Type: 3 types
Distortion Level: OFF/Weak/
Medium/Strong
Invert Color: OFF/ON
Only JPEG and RAW files captured with this camera can be edited using the
Digital Filter.
267
Applying the Digital Filter
1
Select an image for applying the digital filter in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select D (Digital
Filter) and press the 4 button.
The screen to select a filter appears.
4
Use the four-way controller
(2345) to select a filter and
press the 4 button.
After selecting a filter, you can check the effect on the screen.
You can turn the front e-dial (R) to select a different image.
MENU Exit OK OK
5
Use the four-way controller (23) to select a parameter
and the four-way controller (45) to adjust the value.
8
MENU
Color Filter
OK MENU
Slim Filter
OK
268
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Use filters in combination] or [Save as].
Select [Use filters in combination] when you want to apply additional filters to the same image.
Use filters in combination
Save as
Cancel
MENU OK OK
8
Press the 4 button.
If [Use filters in combination] was selected, the camera returns to Step 4.
If [Save as] was selected, the filter-processed image is saved as a new image.
Up to 20 filters, including a digital filter used during shooting (p.162), can be
combined to the same image.
Recreating Filter Effects
8
Retrieves the setting of an image with filter effects and applies the same filter effects to other images.
1
Select a filter-processed image in Playback mode.
2
Select D (Digital Filter) in the playback mode palette.
3
Use the four-way controller (23) to select [Recreating filter
effects] and press the 4 button.
Applying the digital filter
Recreating filter effects
Searching for the original image The history of the filter set for the selected image appears.
MENU OK OK
4
To check the parameter details,
press the M button.
You can check the filter parameters.
1.
2.
3.
4.
MENU
5.
6.
7.
8.
9.
10.
11.
12.
INFO Details
13.
14.
15.
16.
17. - -
18. - -
19. - -
20. - -
OK OK
5
Press the 4 button.
The image selection screen appears.
6
Use the four-way controller (45) to select an image for applying the same filter effects and press
the 4 button.
You can only select an image that has not been processed with a filter.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as] and press the
4 button.
The filter-processed image is saved as a new image.
MENU
Save as
Cancel
OK OK
MENU OK OK
269
8
270
Searching for the Original Image
Searches for and displays the original image prior to digital filter application.
1
Select [Searching for the original
press the 4 button.
The original image prior to digital filter application is retrieved.
Applying the digital filter
Recreating filter effects
Searching for the original image
MENU OK OK
If the original image is no longer stored on the SD Memory Card, the message
[Original image, prior to digital filter application, is not found] appears.
8
Developing RAW Images
You can convert captured RAW files into JPEG or TIFF files.
Only RAW files captured with this camera can be edited. RAW files and JPEG files captured with other cameras cannot be edited on this camera.
Developing One RAW Image
1
Select a RAW image in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select h (RAW
Development) and press the 4 button.
The screen to select a development method is displayed.
4
Use the four-way controller (23) to select [Developing a Single
Image] and press the 4 button.
Developing a Single Image
Developing Multiple Images
8
The parameters recorded in the image file appear.
You can turn the front e-dial (R) to select a different image.
To specify the parameters before
developing, refer to “Specifying the
MENU
RAW JPEG
MENU OK
OK OK
16
M
ISO
NR
100-0001
271
272
5
Press the 4 button.
The save confirmation screen appears.
6
Use the four-way controller (23) to select [Save as] and press the
4 button.
The RAW image is developed and saved as a new image.
RAW JPEG
Saves the image as a new file
Save as
Cancel
MENU OK OK
7
Use the four-way controller (23) to select [Continue] or [Exit].
Select [Continue] to edit other images.
Image developed and stored.
Continue developing?
8
Continue
Exit
OK OK
8
Press the 4 button.
If you select [Continue] in Step 7, the screen for selecting the parameters in Step 4 appears again.
Developing Multiple RAW Images
You can develop multiple RAW images with the same settings.
1
Select [Developing Multiple Images] in Step 4 on p.271 and
press the 4 button.
The multi-image display screen appears.
Refer to p.238 for details on operations in the multi-image display screen.
2
Use the four-way controller (2345) to select the RAW
images to be developed and press the 4 button.
3
Press the L button.
The development confirmation screen appears.
4
Use the four-way controller (23) to select [Develop images as shot] or [Develop images with modified settings].
To change parameters, select [Develop images with modified settings]. Refer to
“Specifying the Parameters” (p.274) for
details.
The screen to select a parameter appears.
5
Use the four-way controller
(2345) to set [File Format],
[Recorded Pixels] and [Quality
Level].
You can select [JPEG] or [TIFF] for the file format. If [TIFF] is selected, the
[Recorded Pixels] and [Quality Level] settings are not available.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as] and press the
4 button.
The selected RAW images are developed and saved as new images.
MENU
Develop images as shot
Develop images with modified settings
RAW JPEG
MENU
Save as
Cancel
OK OK
JPEG
16
M
OK OK
RAW JPEG
Selected images are saved as new files
MENU OK OK
8
273
274
Specifying the Parameters
8
Specify the parameters for developing RAW images.
The following parameters can be changed.
Parameter
File Format
Recorded Pixels
Custom Image
Sensitivity
High-ISO NR
Shadow Correction
Distortion Correction
Lat-Chromatic-Ab Adj
Color Space
Value
JPEG/TIFF p (4928×3264)/J (3936×2624)/
P (3072×2048)/i (1728×1152)
Z (Premium) / C (Best) / D
(Better) / E (Good)
Bright/Natural/Portrait/Landscape/Vibrant/
Muted/Bleach Bypass/Reversal Film/
Monochrome
F (Auto)/G (Daylight)/H (Shade)/
^ (Cloudy)/JD (Fluorescent Light
Daylight Color)/JN (Fluorescent Light
Daylight White)/JW (Fluorescent Light
Cool White)/ JL (Fluorescent Light Warm
White)/I (Tungsten Light)/L (Flash)/ f /K (Manual)/K (Color Temperature)
-2.0 to +2.0
Auto/Off/Low/Medium/High
Off/Low/Medium/High
Off/On
Off/On sRGB/AdobeRGB
Page
-
*1 This cannot be set when [File Format] is set to [TIFF]. (The setting is fixed to p.)
*2 This cannot be set for RAW files taken in Multi-exposure mode.
*3 This can be selected only when a compatible lens is attached. (p.337)
-
1
Press the four-way controller
choose the parameter you want to change.
RAW JPEG
16
M
ISO
NR
100-0001 MENU OK
2
Use the four-way controller (45) to change the value.
Press the four-way controller (5) to display the setting screen for White
Balance and Custom Image.
3
Press the 4 button.
The save confirmation screen appears.
4
Use the four-way controller (23) to select [Save as] and
press the 4 button.
The RAW image is developed and saved as a new image.
275
• You cannot save the background image and use Digital Preview with White
Balance and Custom Image.
• When the white balance is set to K (Manual), press the M button to display the measuring screen.
8
276
Memo
9
Changing Additional
Settings
This chapter describes how to change additional settings.
How to Operate the Set-up Menu ......................278
Formatting the SD Memory Card ......................281
Customizing Buttons and Dials ........................282
Setting the Beep, Date and Time, and Display
Language ............................................................288
Adjusting the Monitor and the Menu Display.....293
Setting the Folder/File Number .........................300
Selecting the Power Settings ............................304
Setting the Photographer Information .............307
Setting the DPOF Settings .................................309
Correcting Defective Pixels in the CMOS
Sensor (Pixel Mapping) ......................................311
Selecting Settings to Save in the Camera
(Memory) .............................................................312
278
How to Operate the Set-up Menu
Perform general settings related to the camera in the [R Set-up] menu.
Refer to “Using the Menus” (p.42) for details on how to use the menus.
9
Set-up Menu Setting Items
Perform the following settings in the [R Set-up 1-4] menus.
Press the 3 button in Capture/Playback mode and use the four-way controller (45) to display the [R Set-up 1-4] menus.
Menu
R 1
Item
Language/ u
Date Adjustment
World Time
Text Size
Beep
Guide Display
Status Screen
Function
Changes the language in which menus and messages appear.
Sets the date format and time.
Sets the display of the local date and time of the specified city so they can be displayed on the monitor in addition to the present location when traveling overseas.
Sets the text size of an item selected on the respective menu screens.
Switches the beep tone on/off.
Sets whether to display indicators on the monitor.
Sets the display color of the status screen and control panel.
Page
279
Menu
R 2
R 3
R 4
Item Function
Brightness Level Changes the brightness of the monitor.
LCD Color Tuning Adjusts the color of the monitor.
Video Out
HDMI Out
Sets the output format when connecting to an AV device with a video input terminal.
Sets the HDMI output format when connecting to an AV device with an HDMI terminal.
USB Connection
Folder Name
Create New Folder
File Name
Copyright
Information
Auto Power Off
Select Battery
Reset
Pixel Mapping
Dust Alert
Dust Removal
Sensor Cleaning
Format
Sets the USB connection mode when connecting to a computer.
Sets the naming system of the folder for storing images.
Creates a new folder on the SD Memory
Card.
Sets the method used to assign file names for images.
Sets the photographer and copyright information embedded in Exif.
Sets the time until the camera turns off automatically.
Sets the battery to use when the optional battery grip (D-BG4) is attached.
Resets all settings.
Maps out and corrects any defective pixels in the CMOS sensor.
Detects dust adhering to the CMOS sensor.
Cleans the CMOS sensor using ultrasonic vibrations.
Locks the mirror in the up position for cleaning the CMOS sensor with a blower.
Formats an SD Memory Card.
Page
9
280
[R Set-up 1] menu
1 2 3 4
English
Date Adjustment
World Time
Text Size
Beep
Guide Display
Status Screen
MENU Exit
Standard
3sec.
[R Set-up 3] menu
1 2 3 4
File Name
Copyright Information
Auto Power Off
Select Battery
Reset
IMGP
1min.
MENU Exit
[R Set-up 2] menu
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name
Create New Folder
MENU Exit
±0
NTSC
Auto
MSC
Date
[R Set-up 4] menu
1 2 3 4
Pixel Mapping
Dust Alert
Dust Removal
Sensor Cleaning
Format
MENU Exit
9
Formatting the SD Memory Card
Use this camera to format (initialize) an SD Memory Card that is unused or has been used on other cameras or digital devices.
Formatting deletes all the data saved on the SD Memory Card.
• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.
• Formatting deletes all data, either protected or unprotected. Be aware.
1
Select [Format] in the [R Set-up 4] menu and press the
four-way controller (5).
The [Format] screen appears.
2
Press the four-way controller (2) to select [Format].
Format
All data will be deleted
Format
Cancel
OK OK
3
Press the 4 button.
Formatting starts.
When formatting is completed, the screen that was displayed before selecting the menu appears again.
9
When an SD Memory Card is formatted, the volume label assigned to the card is “K-5”. When the X is connected to a computer, the SD Memory Card is
recognized as a removable disk with the name “K-5”. (p.318)
281
282
Customizing Buttons and Dials
You can set the functions for when the |/Y button, = button or
Preview dial is operated, or when the shutter release button is pressed halfway.
Setting the Function for the E-dials
9
For each exposure mode, you can set the functions for when the front and rear e-dials or | button are operated.
1
Select [E-Dial Programming] in the [A Rec. Mode 5] menu
and press the four-way controller (5).
The [E-Dial Programming 1] screen appears.
2
Use the four-way controller
(23) to select an exposure mode.
Turn the rear e-dial (S) to display the
[E-Dial Programming 2] screen.
E-Dial Programming
P Tv
Sv - -
Tv
Av
TAv
Tv
- -
Tv
Av
ISO
- -
Av
Av
1 2
P
- -
- -
- -
P LINE
MENU
3
Press the four-way controller (5).
The screen for the selected exposure mode appears.
4
Press the four-way controller (5) and use the four-way controller
(23) to select a function.
You can perform the following settings for each exposure mode.
E-Dial Programming
Tv
Av - -
Av
Tv
P SHIFT
P SHIFT
- - -
P
P
P
P LINE
P LINE
- -
MENU Cancel OK OK
283
Exposure
Mode e
R Front E-dial b
(Shutter speed) c
(Aperture) m
(EV Compensation) e SHIFT
(Program Shift)
–
–
K b o
(Sensitivity) e SHIFT
(Program Shift) o
(Sensitivity) m
(EV Compensation) o
(Sensitivity) b
(Shutter speed)
– b
(Shutter speed) m
(EV Compensation) b
(Shutter speed) o
(Sensitivity)
S Rear E-dial c
(Aperture) b
(Shutter speed) e SHIFT
(Program Shift) m
(EV Compensation)
– o
(Sensitivity)
– o
(Sensitivity) e SHIFT
(Program Shift) o
(Sensitivity) m
(EV Compensation)
– b
(Shutter speed) m
(EV Compensation) b
(Shutter speed) o
(Sensitivity) b
(Shutter speed)
| Button
}e
(Return to e)
}e
(Return to e) e LINE
(Program Line) e LINE
(Program Line)
–
–
– e LINE
(Program Line) e LINE
(Program Line)
–
–
–
–
–
– o AUTO o AUTO
9
284
9
Exposure
Mode c
R Front E-dial
– c
(Aperture) m
(EV Compensation) c
(Aperture) o
(Sensitivity) c
(Aperture) b
(Shutter speed) c
(Aperture)
L
/a p
M
– c
(Aperture) o
(Sensitivity) c
(Aperture)
– c
(Aperture) o
(Sensitivity) c
(Aperture) c
(Aperture)
– c
(Aperture) o
(Sensitivity) c
(Aperture)
– c
(Aperture) o
(Sensitivity)
S Rear E-dial c
(Aperture)
– c
(Aperture) m
(EV Compensation) c
(Aperture) o
(Sensitivity) c
(Aperture) b
(Shutter speed)
| Button
–
–
–
– o AUTO o AUTO e LINE
(Program Line) b SHIFT
(Shutter speed shift) c SHIFT
(Aperture shift)
–
–
–
–
– c SHIFT
(Aperture shift)
–
Exposure
Mode
C
R Front E-dial
– c
(Aperture) m
(EV Compensation) c
(Aperture)
S Rear E-dial c
(Aperture)
– c
(Aperture) m
(EV Compensation)
| Button c SHIFT
(Aperture shift)
–
5
Press the 4 button.
6
Press the 3 button three times.
The camera is ready to take a picture.
Setting the Function for the Buttons
You can set the functions for when the |/Y button, = button,
Preview dial (main switch |) is operated, or when the shutter release button is pressed halfway.
1
Select [Button Customization] in the [A Rec. Mode 5]
menu and press the four-way controller (5).
The [Button Customization] screen appears.
2
Use the four-way controller
(23) to select a button to set a function to and press the four-
way controller (5).
Button Customization
RAW/Fx Button
AF Button
Preview Dial
Shutter Button Half Press
The screen to set the function for the selected button is displayed.
MENU
9
285
286
9
3
Press the four-way controller (5) and use the four-way
controller (23) to select a function.
The following functions can be assigned to each button.
Button
|/Y
button
= button
Preview
Dial
Shutter release button pressed halfway
Setting
One Push File
Format
Exposure Bracketing
Digital Preview
Electronic Level
Composition Adjust.
Enable AF
Cancel AF
Optical Preview
Digital Preview
Enable AF
Off
Off
(Live View only)
Function
Temporarily changes the file format.
Sets the Exposure
Bracketing.
Displays the Digital
Preview.
Displays the Electronic
Level on the monitor.
Displays the [Composition
Adjust.] screen.
The autofocus system operates.
Disables autofocus with the shutter release button while the button is pressed.
Displays the Optical
Preview when the main switch is turned to the preview position (|).
Displays the Digital Preview when the main switch is turned to the preview position (|).
The autofocus system operates.
The autofocus system does not operate when the shutter release button is pressed halfway.
Only during Live View, the autofocus system does not operate when the shutter release button is pressed halfway.
Page
-
4
Press the 4 button.
5
Press the 3 button three times.
The camera is ready to take a picture.
287
9
288
Setting the Beep, Date and Time, and
Display Language
Setting the Beep
9
You can turn the camera operation beep on or off, or change its volume.
By default, all available items are set to O (On), and the volume level is set to [3].
The following items can be set.
• In-focus
• AE-L (AE Lock operation sound)
• Self-timer
• Remote Control
• Mirror Up
• One Push File Format (operation sound when [One Push File Format] is assigned to the |/Y button)
• Press OK for 1 sec. (operation sound when Change AF point is enabled or disabled)
1
Select [Beep] in the [R Set-up 1] menu and press the four-
way controller (5).
The [Beep 1] screen appears.
2
Press the four-way controller (3) and use the four-way
controller (45) to adjust the volume.
Select from six levels. When set to 0, you can turn all the beeps off.
3
Use the four-way controller
(23) to choose an item.
Turn the rear e-dial (S) to display the
[Beep 2] screen.
Beep
Volume
In-focus
AE-L
Self-timer
Remote Control
Mirror Up
1 2
MENU
4
Use the four-way controller (45) to select O or P.
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
289
Changing the Date and Time Display
You can change the initial date and time settings, and set their display formats. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd] for the date display format, and [12h] (12-hour display) or [24h] (24-hour display) for the time display format.
Set in [Date Adjustment] in the [R Set-up 1] menu (p.278).
Date Adjustment
24h
1
Setting the Date and Time (p.67)
Date Format
Date 01 / 01 / 2010
Time
Settings complete
MENU Cancel
Setting the World Time
The date and time selected in “Initial Settings” (p.63) serve as the date and
time of your present location.
Setting the destination in [World Time] enables you to display the local date and time on the monitor when traveling overseas.
1
Select [World Time] in the [R Set-up 1] menu and press
the four-way controller (5).
The [World Time] screen appears.
2
Use the four-way controller (45)
to select X (Destination) or W
(Hometown) for [Setting the
Time].
This setting is reflected on the date and time that appear in the guide display and control panel.
World Time
Setting the Time
Destination
London
Hometown
New York
MENU
9
290
9
3
Press the four-way controller (3).
The selection frame moves to X (Destination setting).
4
Press the four-way controller (5).
The [X Destination] screen appears.
5
Use the four-way controller (45) to select a destination city.
Destination
Turn the rear e-dial (S) to change the region.
The location, time difference and current time of the selected city appear.
London
DST
MENU Cancel
6
Press the four-way controller (23) to select [DST].
+06:00
16:00
OK OK
7
Use the four-way controller (45) to select O or P.
Select O if the destination city uses daylight saving time (DST).
8
Press the 4 button.
The settings are saved and the camera returns to the [World Time] screen.
9
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• Refer to “List of World Time Cities” (p.291) for cities that can be selected as
a destination.
• Select W (Hometown) in Step 2 to set the city and DST setting.
• X appears in the guide display if [Setting the Time] is set to X (Destination).
• When you switch [Setting the Time] to X (Destination), the video output
(p.257) setting changes to the video output format for that city.
291
List of World Time Cities
Region
North
America
Central and
South
America
Europe
Buenos Aires
Sao Paulo
Rio de Janeiro
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Athens
Helsinki
Moscow
City
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Mexico City
Lima
Santiago
Caracas
Region
Africa/
West Asia
East Asia
City
Dakar
Algiers
Johannesburg
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
9
292
Region
Oceania
City
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Setting the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
The camera supports the following languages: English, French, German,
Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish,
Czech, Hungarian, Turkish, Greek, Russian, Korean, Traditional Chinese,
Simplified Chinese and Japanese.
Set in [Language/ u] of the [R Set-up 1] menu (p.278).
1
Setting the Display Language (p.63)
MENU Cancel OK OK
9
Adjusting the Monitor and the Menu
Display
293
Setting the Text Size
You can set the text size of an item selected on the respective menu screens to [Standard] (normal display) or [Large] (magnified display).
Set in [Text Size] of the [R Set-up 1] menu
1 2 3 4
English
Date Adjustment
World Time
Text Size
Beep
Guide Display
Status Screen
MENU Cancel
Standard
Large
3sec.
OK OK
Setting the Guide Display Time
Set the length of time that the guides are displayed on the monitor when
the camera is turned on or the exposure mode is changed. (p.24)
Select from [3 sec.] (default setting), [10 sec.], [30 sec.] and [Off].
Set in [Guide Display] of the [R Set-up 1] menu (p.278).
1 2 3 4
English
Date Adjustment
World Time
Text Size
Beep
Guide Display
Status Screen
MENU Cancel
3sec.
30sec.
Off
OK OK
9
294
Setting the Initial Menu Tab Displayed
Set the initial menu tab displayed on the monitor when the 3 button is pressed.
1
Select [24. Save Menu Location] in the [A Custom
Setting 4] menu and press the four-way controller (5).
The [24. Save Menu Location] screen appears.
2
Use the four-way controller (23) to select [Reset Menu Location] or [Save Menu Location] and
press the 4 button.
24.
Save Menu Location
1
2
Reset Menu Location
Save Menu Location
Pressing the menu button accesses the last used menu tab
MENU Cancel OK OK
9
1
Reset Menu
Location
The [A Rec. Mode 1] menu ([A Rec. Mode 4] menu when the exposure mode is set to C (Movie), and [Q Playback 1] menu when in Playback mode) is always displayed first. (default setting)
2
Save Menu
Location
The menu tab last selected is displayed first.
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Setting the Status Screen Display
You can set whether to display the status screen on the monitor and set the display color of the status screen, control panel and playback mode palette.
1
Select [Status Screen] in the [R Set-up 1] menu and press
the four-way controller (5).
The [Status Screen] screen appears.
2
Use the four-way controller (45) to select O or P.
O Displays the status screen. (default setting)
P Does not display the status screen.
3
Use the four-way controller (23) to select [Auto Screen
Rotation] and use the four-way controller (45) to select
O or P.
O
If the camera is held vertically while measuring the brightness, the status screen/control panel is displayed vertically. (default setting)
P The status screen/control panel is always displayed horizontally.
4
Use the four-way controller
(23) to select [Display Color] and use the four-way controller
(45) to select from six display colors.
Status Screen
Enable
Auto Screen Rotation
Display Color
1/ 125
1
F 5.6
MENU
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
9
295
296
Setting the Display for Instant Review
You can set the Instant Review display settings.
1
Select [Instant Review] in the [A Rec. Mode 5] menu and
press the four-way controller (5).
The [Instant Review] screen appears.
2
Press the four-way controller (5) and use the four-way controller
(23) to select a display time.
Instant Review
Display Time
Histogram
Bright/Dark Area
Enlarge Instant Review
1sec.
3sec.
5sec.
Off
9
MENU Cancel OK OK
3
Press the 4 button.
4
Use the four-way controller (23) to select [Histogram],
[Bright/Dark Area] or [Enlarge Instant Review].
5
Use the four-way controller (45) to select O or P.
When [Enlarge Instant Review] is set to O (default setting), you can
magnify the image with the rear e-dial (S). (p.237)
6
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Adjusting the Brightness of the Monitor
You can adjust the brightness of the monitor. Adjust the settings when the monitor is hard to see.
1
Select [Brightness Level] in the [R Set-up 2] menu and
press the four-way controller (5).
The [Brightness Level] screen appears.
2
Use the four-way controller (45) to adjust the brightness.
You can select from 15 brightness levels.
The value is reset to ±0 when the | button is pressed.
Brightness Level
MENU Cancel ±0 OK OK
3
Press the 4 button.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
297
9
298
Adjusting the Color of the Monitor
You can adjust the color of the monitor.
1
Select [LCD Color Tuning] in the [R Set-up 2] menu and
press the four-way controller (5).
The [LCD Color Tuning] screen appears.
2
Adjust the color.
Seven levels (225 patterns) are available on the G-M and B-A axes.
9
±0 ±0
MENU Cancel ±0 OK OK
Available operations
Four-way controller (23) Adjusts the tone of the colors between green (G) and magenta (M).
Four-way controller (45) Adjusts the tone of the colors between blue (B) and amber (A).
| button Resets the adjustment value.
Front e-dial (R) Displays a saved image in the background so you can adjust the color while viewing the image. This is useful for matching the color of the monitor with that of a computer.
3
Press the 4 button.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Setting the Electronic Level Display
This camera is equipped with an electronic level for detecting whether the camera is level, as indicated on the bar graph in the viewfinder and on the
LCD panel and monitor. Select whether to display the bar graph.
1
Select [Electronic Level] in the [A Rec. Mode 4] menu.
2
Use the four-way controller
(45) to select O or P.
O
P
Displays the bar graph of the electronic level.
Does not display the bar graph of the electronic level. (default setting)
1 2 3 4 5
Movie
Live View
Electronic Level
Horizon Correction
Shake Reduction
Input Focal Length 35mm
MENU Exit
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
The bar graph can be displayed on the monitor when the M button is pressed in the control panel. When [Electronic Level] is assigned to the |/
Y
button (p.285), press the |/Y button while the status screen or Live
View is displayed to display the electronic level. (p.168)
299
9
300
Setting the Folder/File Number
Changing the Naming System of the Folder
You can select a naming system of the folder for storing images.
Date
PENTX
The two digits of the month and day on which the picture was taken are assigned as the folder name in the form of [xxx_MMDD]. [xxx] is a sequential number from 100 to 999. [MMDD] (month and day) appears
according to the display style set in [Date Adjustment] (p.289). (default
setting)
Example) 101_0125: Folder for images taken on January 25th
The folder name is assigned in the form of [xxxPENTX].
Example) 101PENTX
Set in [Folder Name] in the [R Set-up 2] menu (p.279).
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name
Create New Folder
MENU Cancel
±0
NTSC
Auto
MSC
Date
OK OK
Creating New Folders
9
Creates a new folder on an SD Memory Card. A folder is created with the number following the number of the folder currently being used.
1
Select [Create New Folder] in the [R Set-up 2] menu and
press the four-way controller (5).
The [Create New Folder] screen appears.
2
Use the four-way controller (23) to select [Create folder] and
press the 4 button.
A folder with a new number is created.
Create New Folder
Creates a new storage folder with the following name:
101 PENTX
Create folder
Cancel
OK OK
301
Only one folder can be created using this operation. Multiple empty folders cannot be created consecutively.
Selecting the File Number Setting
You can select a method for assigning the file number of an image when
saved to a new folder. Set in [File No.] of [Memory] (p.312) in the [A Rec.
Mode 4] menu.
O
P
The file number of the last image saved to the previous folder is saved and subsequent images are assigned sequential file numbers even if a new folder is created.
The file number of the first image saved to a folder returns to 0001 each time a new folder is created for saving images.
When the number of storable images exceeds 500, captured images are divided into folders of 500 images each. However, in Auto Bracketing shooting, images will be stored in the same folder until shooting is completed, even if the number of images exceeds 500.
9
302
Setting the File Name
9
You can change the file names of images.
The default naming conventions are as follows depending on the [Color
Space] (p.212) setting in the [A Rec. Mode 3] menu.
“xxxx” indicates the file number. This is displayed as a four-digit sequential
Color Space sRGB
File Name
IMGPxxxx.JPG
AdobeRGB _IGPxxxx.JPG
For sRGB, you can change [IMGP] (4 characters) to the desired characters.
For AdobeRGB, of the 4 characters you selected, the first 3 are assigned in place of [IGP].
Example: When set to [ABCDxxxx.JPG], files are named
[_ABCxxxx.JPG] for AdobeRGB.
1
Select [File Name] in the [R Set-up 3] menu and press the
four-way controller (5).
The [File Name] screen appears.
2
Use the four-way controller (23) to select [Change] and press the
four-way controller (5).
The text-entry screen appears.
File Name sRGB
AdobeRGB
Change
I M G P xxxx.jpg
_ I G P xxxx.jpg
Reset File Name
MENU
3
Change the text.
File Name
Text selection cursor
Finish
Text input cursor
MENU Cancel OK Enter
Available operations
Four-way controller
(2345)
Rear e-dial (S)
4 button
Moves the text selection cursor.
Moves the text input cursor.
Enters a character selected with the text selection cursor at the position of the text input cursor.
4
After entering the text, move the text selection cursor to
[Finish] and press the 4 button.
The file name is changed.
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
303
Resetting the File Name
You can reset a changed file name to its default setting.
1
Select [Reset File Name] in Step 2 on p.302 and press the
four-way controller (5).
The [Reset File Name] screen appears.
2
Press the four-way controller (2) to select [Reset] and
press the 4 button.
The file name is reset.
3
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
9
304
Selecting the Power Settings
9
Setting the Auto Power Off Function
You can set the camera to turn off automatically if unused after a certain length of time. Select from [1min.] (default setting), [3min.], [5min.],
[10min.], [30min.] or [Off].
Set in [Auto Power Off] of the [R Set-up 3] menu (p.279).
1 2 3 4
File Name
Copyright Information
Auto Power Off
Select Battery
Reset
MENU Cancel
IMGP
1min.
3min.
5min.
10min.
30min.
Off
OK OK
• The Auto Power Off function does not work in the following situations.
- when the Live View image is displayed
- when the slideshow is played back
- when the camera is connected to a computer with an USB cable
• If the camera turns off after the set length of time, perform one of the following operations to reactivate it.
- Turn on the camera again.
- Press the shutter release button halfway.
- Press the Q button, 3 button or M button.
Selecting a Battery
You can set the battery priority to the camera or the battery grip when the
optional battery grip D-BG4 (p.345) is attached.
1
Select [Select Battery] in the [R Set-up 3] menu and press
the four-way controller (5).
The [Select Battery] screen appears.
2
Press the four-way controller
(5).
Select Battery
Auto Select
305
MENU
3
Use the four-way controller (23) to select a battery to be
prioritized and press the 4 button.
Auto Select
Body First/
Grip First
Priority is given to the battery with the most remaining power. (default setting)
Priority is given to the selected battery.
4
When using AA batteries in the battery grip, use the four-way
controller (23) to select [AA
Battery Type] and press the four-
way controller (5).
Select Battery
Auto Select
Body First
Grip First
MENU Cancel
Select Battery
Auto Select
AA Battery Type
MENU
OK OK
9
AUTO
306
5
Use the four-way controller (23) to select the AA battery type and
press the 4 button.
When set to [Auto-detect], the camera will automatically detect the type of batteries being used.
Select Battery
AA Battery Type
AUTO
Ni-MH
AL
Li
AUTO
Auto-detect
Nickel-Metal Hydride
Alkaline
Lithium
MENU Cancel OK OK
6
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• If batteries are inserted into both the body and grip, the battery levels of both are checked when the power is turned on. Regardless of the [Select Battery] setting, both batteries are slightly used.
• When the currently selected battery runs out as a result of the check, the message [Battery depleted] appears on the monitor. Turn the camera off and on again, and the camera will switch to the remaining battery.
• You can check the battery usage condition on the status screen and LCD
When the type of AA batteries inserted in the battery grip differs from the battery type setting in Step 5, the battery level will not be correctly determined.
Please set the correct battery type. Usually, there is no problem using [Autodetect]. However in low temperatures and when using batteries that were stored for long periods of time, set the appropriate battery type so the camera can correctly determine the remaining battery level.
9
Setting the Photographer Information
307
The camera type, shooting conditions and other information are automatically embedded in captured images in the Exif data format. You can embed photographer information in this Exif.
Use the provided “PENTAX Digital Camera Utility 4” software (p.322) to check
the Exif information.
1
Select [Copyright Information] in the [R Set-up 3] menu
and press the four-way controller (5).
The [Copyright Information] screen appears.
2
Use the four-way controller
(45) to select O or P.
Copyright Information
Embed Copyright Data
O
P
Embeds copyright information in the
Exif.
Does not embed copyright information in the Exif. (default setting)
Photographer
Copyright Holder
MENU
3
Use the four-way controller (23) to select [Photographer]
and press the four-way controller (5).
The text-entry screen appears.
9
308
4
Enter the text.
Up to 32 single-byte alphanumeric characters and symbols can be entered.
Text selection cursor
Text input cursor
Photographer
F i n i s h
Delete One Character
MENU Cancel OK Enter
Available operations
Four-way controller
(2345)
Rear e-dial (S)
| button
4 button i button
Moves the text selection cursor.
Moves the text input cursor.
Switches between upper and lower case letters.
Enters a character selected with the text selection cursor at the position of the text input cursor.
Deletes a character at the position of the text input cursor.
5
After entering the text, move the text selection cursor to [Finish]
and press the 4 button.
Copyright Information
Embed Copyright Data
Photographer
The camera returns to the [Copyright
Information] screen.
Copyright Holder
9
MENU
6
Use the four-way controller (23) to select [Copyright
Holder] and enter the text in the same way as
[Photographer].
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Setting the DPOF Settings
You can order conventional photograph prints by taking the SD Memory
Card with recorded images to a store for printing.
DPOF (Digital Print Order Format) settings allow you to specify the number of copies and whether to imprint the date.
• DPOF settings cannot be applied to RAW images.
• You can make DPOF settings for up to 999 images.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select r (DPOF)
and press the 4 button.
The screen to select how to change the settings is displayed.
3
Use the four-way controller (23) to select [Single Image] or [All
Images] and press the 4 button.
Single Image
All Images
MENU OK OK
9
4
When [Single Image] is selected in Step 3, use the four-way
controller (45) to select an image to set DPOF settings.
MENU
Copies 00 Date
Date OK OK
309
310
5
Use the four-way controller (23) to select the number of copies.
You can set up to 99 copies.
K appears at the top right of the screen for images with DPOF settings.
To cancel the DPOF settings, set the number of copies to [00].
6
Turn the rear e-dial (S) to
select O or P for printing the date.
9
O The date will be printed.
P
The date will not be printed.
Copies 01 Date
MENU Date OK OK
Repeat Steps 4 to 6 to make DPOF settings for other images (up to 999).
7
Press the 4 button.
The DPOF settings for the selected image is saved and the camera returns to Playback mode.
• Depending on the printer or printing equipment at the photo processing lab, the date may not be printed on the pictures even if the date for DPOF setting is set to O.
• The number of copies specified in the All Images setting applies to all the images, and that specified in the Single Image setting is canceled. Before printing, check that the specified number is correct.
Correcting Defective Pixels in the
CMOS Sensor (Pixel Mapping)
Pixel Mapping is a function for mapping out and correcting defective pixels in the CMOS sensor.
1
Select [Pixel Mapping] in the [R Set-up 4] menu and press
the four-way controller (5).
The [Pixel Mapping] screen appears.
2
Press the four-way controller (2) to select [Pixel Mapping] and
press the 4 button.
Defective pixels are mapped and corrected, and the screen that was displayed before selecting the menu appears again.
Pixel Mapping
Checks the image sensor and corrects defective pixels
Pixel Mapping
Cancel
OK OK
When the battery level is low, the message [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC50 (optional) or change to the battery with ample power remaining.
311
9
312
Selecting Settings to Save in the
Camera (Memory)
You can select which function settings to save when the camera is turned off. The following function settings can be saved.
Function
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Flash Exposure Comp.
Default
Setting
O
O
O
O
O
O
O
Function
Cross Processing
Extended Bracketing
Digital Filter
HDR Capture
Playback Info Display
File No.
Default
Setting
P
O
P
P
O
O
[Memory] cannot be selected when the mode dial is set to A.
9
1
Select [Memory] in the [A Rec. Mode 5] menu and press
the four-way controller (5).
The [Memory 1] screen appears.
2
Use the four-way controller (23) to choose an item.
Turn the rear e-dial (S) to display the
[Memory 2] screen.
Memory
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Flash Exposure Comp.
MENU
3
Use the four-way controller (45) to select O or P.
1 2
O
P
Settings are saved even when the camera is turned off.
Settings are cleared and returned to their default values when the camera is turned off.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
313
• Set [File No.] to O (On) to continue the sequential numbering for the file
name even if a new folder is created. Refer to “Selecting the File Number
• When the [R Set-up] menu is reset (p.335), all Memory settings return to the
default values.
9
314
Memo
10
Connecting to a
Computer
This chapter explains how to connect the camera to your computer, install the supplied CD-ROM, etc.
Manipulating Captured Images on a
Computer ............................................................316
Saving Images on Your Computer ....................317
Using the Provided Software ............................320
316
Manipulating Captured Images on a
Computer
The captured still pictures and movies can be transferred to a computer by connecting the X using a USB cable and can be managed using the provided software.
We recommend the following system requirements to connect your camera to a computer or to use the software “PENTAX Digital Camera
Utility 4” included on the CD-ROM (S-SW110).
Windows
OS
Monitor
Others
Windows XP (SP3 or later), Windows Vista, or Windows 7 (can be run as a 32-bit application on any x64 Edition of Windows.)
CPU
RAM
Pentium D 3.0 GHz equivalent or higher (Intel Core 2 Duo processor 2.0 GHz equivalent or higher recommended)
2.0 GB or more (3.0 GB or more recommended)
Free Disk Space 1 GB or more (8 GB or more recommended)
1280×800 pixels or more (1920×1200 or more recommended) with 24-bit full color (approximately 16.77 million colors)
USB 2.0 port must be standard equipment
10
Macintosh
OS
Monitor
Others
Mac OS X 10.4.11, 10.5, or 10.6
CPU
RAM
PowerPC G5 Dual-core 2.0 GHz or higher (Intel Core 2 Duo processor 2.0 GHz or higher recommended. Universal Binary format.)
2.0 GB minimum (4.0 GB or more recommended)
Free Disk Space 1 GB minimum (8 GB or more recommended)
1280×800 pixels or more (1920×1200 or more recommended) with 24-bit full color (approximately 16.77 million colors)
USB 2.0 port must be standard equipment
Saving Images on Your Computer
317
Setting the USB Connection Mode
Set the USB connection mode when connecting to a computer via the provided USB cable (I-USB7). The default setting is [MSC].
1
Select [USB Connection] in the [R Set-up 2] menu and
press the four-way controller (5).
2
Use the four-way controller (23) to select [MSC] or [PTP].
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name
Create New Folder
MENU Cancel
±0
NTSC
Auto
MSC
PTP
OK OK
3
Press the 4 button.
The setting is changed.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
10
318
MSC and PTP
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the computer via USB as a memory device. Also indicates a standard for controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage
Class, you can copy, read, and write files from a computer without installing a dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without installing a device driver.
Unless otherwise specified, select MSC when connecting the X to your computer.
10
Saving Images by Connecting Your Camera and Your Computer
1
Turn your computer on.
2
Turn off your camera and use the provided USB cable to connect your camera and your computer.
3
Turn your camera on.
The camera is recognized as a removable disk or an SD Memory Card with a volume label “K-5”.
If the “K-5” dialog appears when the camera is turned on, select [Open folder to view files using Windows Explorer] and click the OK button.
4
Save the captured images to your computer.
Drag and drop the image file(s) or the folder containing the image files in your camera to the hard disk of your computer or the desktop.
5
Disconnect your camera from your computer.
319
10
320
Using the Provided Software
“PENTAX Digital Camera Utility 4” is included on the CD-ROM (S-
SW110). Using the PENTAX Digital Camera Utility 4, you can manage images saved on your computer, and develop RAW files taken with the
X and adjust the color of the images.
Compatible file formats: .bmp (BMP)/.jpg (JPEG)/.pef (files recorded in
PENTAX’s original RAW format)/.png (PNG)/.tif
(TIFF)/.dng (DNG format RAW file)
Installing the Software
10
You can install the software from the provided CD-ROM.
When multiple accounts have been setup on your computer, log on with an account that has administrative rights before installing the software.
1
Turn your computer on.
Make sure no other software is running.
2
Place the CD-ROM (S-SW110) into the CD-ROM drive on your computer.
The [PENTAX Software Installer] screen appears.
If the [PENTAX Software Installer] screen does not appear
• For Windows
1 Click [My Computer] from the Start menu.
2 Double-click the [CD-ROM drive (S-SW110)] icon.
3 Double-click the [Setup.exe] icon.
• For Macintosh
1 Double-click the CD-ROM (S-SW110) icon on the desktop.
2 Double-click the [PENTAX Installer] icon.
3
Click [PENTAX Digital Camera
Utility 4].
For Windows, proceed to Step 4.
For Macintosh, follow the instructions on the screen to perform subsequent steps.
4
Select the desired language in the [Choose Setup Language] screen and click [OK].
5
When the [InstallShield
Wizard] screen appears in the selected language, click
[Next].
Follow the instructions on the screen to perform subsequent steps.
321
10
322
Screens of the PENTAX Digital Camera Utility 4
When PENTAX Digital Camera Utility 4 is launched, the following screen
(browser) appears.
The screenshots used in this explanation are for Windows.
Browser tab set (default setting)
You can perform the file management functions such as viewing and organizing the images.
1
2
3 4 3
10
1 Menu Bar
This executes functions or makes various settings.
For Macintosh, the Menu bar appears at the top of the desktop.
2 Tool Bar
Frequently used functions are provided as Tool bar buttons.
5
3 Control Panel
Shooting information and settings of the selected image appear in this panel. The set of tab pages displayed in Control Panel can be changed by pressing the Browser, Laboratory and Custom buttons on the Tool bar.
4 File Display Pane
The file list and the images in the selected folder appear here.
5 Status Bar
Information on the selected item appears.
323
Laboratory tab set (default setting)
The control panel for adjusting the image appears here.
10
324
Custom tab set (default setting)
The screen display can be customized here.
The Custom tab pages enable you to customize whether to show/hide the various tab pages in accordance with your needs. By default, all tab pages are displayed.
Viewing Detailed Information on the Software
Refer to Help for details on using the software program.
10
1
Click the button on the Tool bar.
Or, select [PENTAX Digital Camera
Utility Help] from the [Help] menu.
Regarding Product Registration
To better serve you, please take a moment to register your software.
Click [Product Registration] on the
325
A world map for Internet Product
Registration is displayed. If your computer is connected to the
Internet, click the displayed country or region and then follow the instructions to register your software.
Note that you can only register online if your country or area is shown.
10
326
Memo
11
Appendix
Default Settings ..................................................328
Resetting the Menus ..........................................335
Functions Available with Various Lens
Combinations .....................................................337
Cleaning the CMOS Sensor ...............................340
Optional Accessories .........................................345
Error Messages ..................................................351
Troubleshooting .................................................354
Main Specifications ............................................356
Glossary ..............................................................362
Index ....................................................................367
WARRANTY POLICY ..........................................373
328
Default Settings
The table below shows the factory default settings.
The functions set in Memory (p.312) are saved even when the camera is
turned off.
Reset Setting
Yes: The setting returns to the default setting with the reset function
No : The setting is saved even after reset.
Direct Keys
Item Default Setting
Reset
Setting
Page
Drive Mode
Flash Mode
9 (Single Frame
Shooting)
Yes
Yes
White Balance
Custom Image
Depends on the capture mode
F (Auto)
Bright
Yes
Yes
11
[A Rec. Mode] Menu
Item
Exposure Mode
File Format
JPEG Recorded Pixels
JPEG Quality
AUTO AF Point Setting
Lens
Correction
Distortion Correction
Lat-Chromatic-Ab Adj
Cross Processing
Default Setting
A 1 e (Hyper-program)
JPEG p (4928×3264)
11 AF Points
Off
Off
Off
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
329
Item Default Setting
Extended
Bracketing
Type
Bracketing Amount
Digital Filter
HDR
Capture
Multiexposure
HDR Capture
Auto Align
Number of Shots
Auto EV Adjustment
Interval
Number of Shots Interval
Shooting Start Interval
Start Time
Composition
Adjust.
X-Y direction
Rotation
Recall Previous Position
D-Range
Setting
ISO AUTO
Setting
Highlight Correction
Shadow Correction
Sensitivity limit
AUTO ISO Parameters
High-ISO NR
Slow Shutter Speed NR
Program Line
Color Space
RAW File Format
Recorded Pixels
Off
BA±1 (White Balance)/
±1 (other than White
Balance)
Not use any filters
Off
P (Off)
2 times
P (Off)
1 sec.
2 images
Now
12:00AM / 00:00
Center
±0°
P (Off)
Off
Off
100 – 3200 s (Standard)
Auto
Auto k (Normal) sRGB
PEF b (1280×720,
16:9, 30 fps)
Movie
Quality Level
Sound
Cross Processing
Digital Filter
Movie Aperture Control
Shake Reduction g (On)
Off
Not use any filters
Fixed l (Off)
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
11
330
11
Item
Live
View
Autofocus Method
Show Grid
Info Overlay
Histogram
Bright/Dark Area
Electronic Level
Horizon Correction
Shake Reduction
Input Focal Length
Instant
Review
Display Time
Histogram
Bright/Dark Area
Enlarge Instant
Review
Histogram
Digital
Preview
Bright/Dark Area
Enlarge Instant
Review e
K b c
E-Dial
Programming L /a p
M
C
Button
Customization
|/Y Button
= Button
Preview Dial
Shutter Button Half
Press
Default Setting
I (Face Detection AF)
Off
O (On)
P (Off)
P (Off)
P (Off)
P (Off) k (On)
35 mm
1 sec.
P (Off)
P (Off)
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
O (On)
P (Off)
P (Off)
O (On)
Rb , Sc,
|´e
R –, So, |–
Rb , S–, |–
R –, Sc, |–
Rb , Sc,
|eLINE
R –, Sc, |–
R –, Sc, |–
R –, Sc,
|cSHIFT
One Push File Format
Enable AF
Optical Preview
Enable AF
Yes
Yes
Page
331
Item Default Setting
Reset
Setting
Page
Memory
Cross Processing,
Digital Filter, HDR
Capture
Other than the above functions
P
O
(Off)
(On)
Yes
Yes
Save USER Mode – Yes
*1 Appears only when the mode dial is set to A.
*2 The saved settings are reset only with [Reset USER Mode] in the [Save USER Mode] screen.
Playback Mode Palette
Item Default Setting
Image Rotation
Digital Filter
Resize
Cropping
Slideshow
Save as Manual WB
RAW Development
Index
Image Comparison
Movie Editing
Protect
DPOF
–
Toy Camera
Maximum size according to the setting
Maximum size according to the setting
–
–
File Format: JPEG
Recorded Pixels: p
Quality Level: C
–
–
–
–
–
*3 The parameters specified in [Digital Filter] are also reset.
Reset
Setting
–
Yes
–
–
–
–
Yes
–
–
–
No
No
Page
11
332
[Q Playback] Menu
Item
Slideshow
Interval
Screen Effect
Repeat Playback
Quick Zoom
Bright/Dark Area
Auto Image Rotation
Delete All Images
Default Setting
3 sec.
Off
P (Off)
Off
P (Off)
O (On)
–
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
–
Page
11
[R Set-up] Menu
Item Default Setting
Language/ u
Date Adjustment
Setting the Time
Destination (City)
World Time Destination (DST)
Hometown (City)
Hometown (DST)
Text Size
Beep
Volume
Setting
Guide Display
Status
Screen
Status Screen
Auto Screen Rotation
Display Color
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name
According to default setting
According to default setting
W (Hometown)
Same as Hometown
Same as Hometown
According to default setting
According to default setting
According to default setting
3
All O (On)
3 sec.
O (On)
O (On)
1
±0
±0
According to default setting
Auto
MSC
Date
Reset
Setting
No
No
Yes
No
No
No
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
333
Item
Create New Folder
File Name
Embed Copyright
Data
Copyright
Information Photographer
Copyright Holder
Auto Power Off
Select
Battery
Select Battery
AA Battery Type
Reset
Pixel Mapping
Dust Alert
Dust
Removal
Dust Removal
Start-up Action
Sensor Cleaning
Format
Default Setting
–
IMGP/_IGP
P (Off)
–
–
1 min.
Auto Select
Auto-detect
–
–
–
–
O (On)
–
–
Reset
Setting
–
No
No
Yes
Yes
Yes
–
–
–
–
Yes
–
–
*4 The setting can be reset only with [Reset File Name] in the [File Name] screen.
Page
[A Custom Setting] Menu
Item
1. EV Steps
2. Sensitivity Steps
3. Expanded Sensitivity
4. Meter Operating Time
5. AE-L with AF Locked
6. Link AE to AF Point
7. Auto EV Compensation
8. Auto Bracketing Order
9. One-Push Bracketing
10. WB Adjustable Range
11. WB When Using Flash
12. AWB in Tungsten Light
13. Color Temperature Steps
Default Setting
1/3 EV Steps
1 EV Step
Off
10 sec.
Off
Off
Off
0 - +
Off
Auto Adjustment
Auto White Balance
Subtle Correction
Kelvin
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
–
–
11
334
Item
14. Superimpose AF Area
15. AF.S Setting
16. AF.C Setting
17. AF Assist Light
18. AF with Remote Control
19. Remote Control in Bulb
20. Release While Charging
21. Flash in Wireless Mode
22. LCD Panel Illumination
23. Saving Rotation Info
24. Save Menu Location
25. Catch-in Focus
26. AF Fine Adjustment
27. Using Aperture Ring
Reset Custom Functions
Default Setting
On
Focus-priority
Focus-priority
On
Off
Mode1
Off
On
High
On
Reset Menu Location
Off
Off
Prohibited
–
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
–
Page
*5 The saved adjustment value is reset only with [Reset] in the [26. AF Fine Adjustment]
screen.
11
Resetting the Menus
335
Resetting the Rec. Mode/Playback/Set-up
Menus
Settings in the [A Rec. Mode] menu, [Q Playback] menu, [R Set-up] menu, direct keys and playback mode palette can be reset to default settings.
Language/ u, Date Adjustment, the city and DST settings for World Time,
Text Size, Video Output, Copyright Information and [A Custom Setting] menu settings are not reset.
[Reset] cannot be selected when the mode dial is set to A.
1
Select [Reset] in the [R Set-up 3] menu and press the four-
way controller (5).
The [Reset] screen appears.
2
Press the four-way controller (2) to select [Reset] and press the
4 button.
The settings are reset, and the screen that was displayed before selecting the menu appears again.
Reset
Returns to default settings
Reset
Cancel
OK OK
11
336
Resetting the Custom Menu
Reset settings in [A Custom Setting] menu to default values.
1
Select [Reset Custom Functions] in the [A Custom
Setting 4] menu and press the four-way controller (5).
The [Reset Custom Functions] screen appears.
2
Press the four-way controller (2) to select [Reset] and press the
4 button.
Reset Custom Functions
Returns the custom function settings to default values
The settings are reset, and the screen that was displayed before selecting the menu appears again.
Reset
Cancel
OK OK
11
Functions Available with Various
Lens Combinations
337
Only DA, DA L and FA J lenses and D FA/FA/F/A lenses which have an s
(Auto) position on the aperture ring can be used with factory default settings.
Refer to “Notes on [27. Using Aperture Ring]” (p.339) for other lenses and
D FA/FA/F/A lenses with aperture ring set to a position other than s.
z : Functions are available when the aperture ring is set to the s position.
# : Some functions are restricted.
× : Functions are unavailable.
Function
Lens
[Mount type]
DA
DA L
D FA
[K
AF
]
[K
AF2
]
[K
AF3
]
Autofocus
(Lens only)
(With AF adapter 1.7×)
Manual focus
(With the focus indicator)
(With matte field)
Quick-Shift Focus System
Eleven AF points/Five AF points z
– z z
#
z
Multi-segment metering e b
(Hyper-program) mode
K (Sensitivity Priority) mode
(Shutter Priority) mode z z z c (Aperture Priority) mode z
L (Shutter & Aperture Priority) mode z a (Hyper-manual) mode
P-TTL Auto Flash
z z z
– Power Zoom
Automatically obtaining the lens focal length information when using the
Shake Reduction function
Lens Correction function
z z
FA J
FA
[K
AF
]
[K
AF2
] z
– z z z z z z
× z z z z z
z
×
F
[K
AF
] [K
A
] z
– z z z
×
A
–
#
× × z #
z z z z z z z z
– z z z z
×
× z × z
z
z
z
z
z z
–
#
×
–
×
×
M
P
[K]
–
×
×
11
338
*1 Lenses with a maximum aperture of F2.8 or faster. Only available at the s position.
*2 Lenses with a maximum aperture of F5.6 or faster.
*3 When using the built-in flash and AF540FGZ, AF360FGZ, AF200FG or AF160FC.
*4 Aberration correction is available in [Lens Correction] of the [A Rec. Mode 1] menu. The
[Distortion Correction] setting is disabled when using the DA 10-17mm FISH-EYE lens.
*5 Only available with compatible lenses.
*6 To use an FA/F SOFT 85 mm F2.8 lens or FA SOFT 28 mm F2.8 lens, set [27. Using
Aperture Ring] to [Permitted] in the [A Custom Setting 4] menu. Pictures can be taken
with the aperture you set, but only within manual aperture range.
*7 Only available with K
AF2
mount FA lenses.
*8 Only available with compatible lenses (FA 31mm F1.8 Limited, FA 43mm F1.9 Limited, or FA 77mm F1.8 Limited).
*9 The focusing area is fixed to U (Center).
*10 c (Aperture Priority) Automatic Exposure with the aperture open. (Adjusting the aperture ring has no effect on the actual aperture value.)
Lens Names and Mount Names
DA lenses with an ultrasonic motor and FA zoom lenses with power zoom use the K
AF2
mount. DA lenses with an ultrasonic motor and no AF coupler use the K
AF3
mount.
FA single focal length lenses (non-zoom lenses), DA or DA L lenses without an ultrasonic motor and D FA, FA J and F lenses use the K
AF mount.
Refer to respective lens manuals for details.
Lenses and Accessories that Cannot be Used with this Camera
11
When the aperture ring is set to other than the s (Auto) position or a lens without an s position or accessories such as an auto extension tube or
auto bellows are used, the camera will not operate unless [27. Using
Aperture Ring] is set to [Permitted] in the [A Custom Setting 4] menu.
Refer to “Notes on [27. Using Aperture Ring]” (p.339) for restrictions that
apply.
All camera exposure modes are available when using DA/DA L/FA J or lenses with an s position set to the s position.
Lens and Built-in Flash
The built-in flash cannot be regulated and fully discharges when A lenses not set to the s (Auto) position, pre A lenses or soft focus lenses are used.
Note that the built-in flash cannot be used as an Auto Flash.
339
Notes on [27. Using Aperture Ring]
When [27. Using Aperture Ring] is set to
[Permitted] in the [A Custom Setting 4] menu, the shutter can be released even if the aperture ring of the D FA, FA, F or A lens is not set to the s (Auto) position or a lens without an s position is attached. However, some features will be restricted as shown below.
27.
Using Aperture Ring
1
2
Prohibited
Permitted
Shutter will release when aperture ring is not set to the
"A" position
MENU Cancel OK OK
Restrictions on using lenses with aperture ring set to a position other
than s
Lens Used
Exposure
Mode
Restriction
D FA, FA, F, A, M (lens only or with auto diaphragm accessories such as auto extension tube K) c (Aperture
Priority)
The aperture remains open regardless of the aperture ring position. The shutter speed changes in relation to the open aperture but an exposure error may occur. In the viewfinder,
[F--] appears for the aperture indicator.
D FA, FA, F, A, M, S (with diaphragm accessories such as extension tube K)
Manual diaphragm lens such as reflex lens (lens only) c (Aperture
Priority) c (Aperture
Priority)
Pictures can be taken with a specified aperture value but an exposure error may occur. In the viewfinder, [F--] appears for the aperture indicator.
FA, F SOFT 85mm, FA
SOFT 28mm (lens only)
All lenses c (Aperture
Priority) a (Hypermanual)
Pictures can be taken with a specified aperture value in the manual aperture range. In the viewfinder,
[F--] appears for the aperture indicator.
When the depth of field is checked
(Optical Preview), exposure metering starts and the exposure can be checked.
Pictures can be taken with a set aperture value and shutter speed. In the viewfinder,
[F--] appears for the aperture indicator.
When the depth of field is checked
(Optical Preview), exposure metering starts and the exposure can be checked.
11
The camera operates in c (Aperture Priority) mode even if the mode dial is at
B , e, K, b or L when the aperture is set to other than the s position.
340
Cleaning the CMOS Sensor
If the CMOS sensor becomes dirty or dusty, shadows may appear in the image in certain situations such as when shooting against a white background. This indicates that the CMOS sensor must be cleaned.
Removing Dust with Ultrasonic Vibrations
(Dust Removal)
Dust adhering to the CMOS sensor is removed by applying ultrasonic vibrations to the filter on the front surface of the CMOS sensor for approximately one second.
1
Select [Dust Removal] in the [R Set-up 4] menu and press
the four-way controller (5).
The [Dust Removal] screen appears.
2
Press the 4 button.
The Dust Removal function is activated.
Set [Start-up Action] to O (On) to turn the
Dust Removal function on every time the camera is turned on.
When Dust Removal is completed, the camera returns to the [R Set-up 4] menu.
Dust Removal
Dust Removal
Start-up Action
MENU OK Start
11
Detecting Dust on the CMOS Sensor
(Dust Alert)
Dust Alert is a function that detects dust adhering to the CMOS sensor and visually displays the location of the dust.
You can save an image indicating the dust location and display it when
performing sensor cleaning (p.343).
The following conditions must be met before using the Dust Alert function:
- A DA, DA L, FA J lens or a D FA, FA or F lens that has an s (Auto) position is attached.
- The aperture is set to the s position when using a lens with an aperture ring.
- The mode dial is set to any mode other than C (Movie).
- The focus mode lever is set to l or A.
• The exposure time may be extremely long when using the Dust Alert function. Note that if the direction of the lens is changed before processing is complete, dust will not be detected properly.
• Depending on the subject conditions or temperature, dust may not be detected properly.
• The Dust Alert image can only be displayed during sensor cleaning within 30 minutes from the time the image is saved. If more than 30 minutes elapse, save a new Dust Alert image and then perform sensor cleaning.
• The saved Dust Alert image cannot be displayed in Playback mode.
• The Dust Alert image is saved only when an SD Memory Card is inserted.
1
Select [Dust Alert] in the [R Set-up 4] menu and press the
four-way controller (5).
The [Dust Alert] screen appears.
341
11
342
2
Fully display a white wall or other bright subject with no detail in the viewfinder and press the shutter release button fully.
Dust Alert
Checks for dust on the sensor.
Press shutter release button to reveal dust location
After image processing is performed, the
Dust Alert image appears.
If the message [The operation could not be completed correctly] is displayed,
MENU press the 4 button and take another picture.
3
Check the sensor for dust.
SHUTTER Check
11
OK
Available operations
Rear e-dial (S)/
M button
Displays the Dust Alert image at full screen display.
4
Press the 4 button.
The Dust Alert image is saved and the camera returns to the [R Set-up
4] menu.
Regardless of the camera settings, the Dust Alert image will be taken with specific shooting conditions.
343
Removing Dust with a Blower
Raise the mirror up and open the shutter when cleaning the CMOS sensor with a blower.
Please contact a PENTAX Service Center for professional cleaning because the CMOS sensor is a precision part. Cleaning services involve a fee.
You can use the optional Imagesensor Cleaning kit O-ICK1 (p.350) when
cleaning the CMOS sensor.
• Do not use a spray type blower.
• Do not perform Sensor Cleaning during Bulb shooting. The shutter may accidentally close and may cause damage to the camera’s internal parts.
• To prevent dirt and dust from accumulating on the CMOS sensor, keep the lens mount cap on the camera when a lens is not attached.
• When the battery level is low, the message [Not enough battery power remaining to clean sensor] is displayed on the monitor.
• It is recommended to use the AC adapter kit K-AC50 (optional) when cleaning the sensor. If you are not using the AC adapter kit K-AC50, please install the battery with ample capacity remaining. If the battery capacity becomes low during cleaning, a warning beep will sound. In this case, stop cleaning immediately.
• Do not put the tip of the blower inside the lens mount area. If the power is turned off, this may cause damage to the shutter, CMOS sensor and the mirror.
• The self-timer lamp blinks, and [d] and [Cln] appear on the LCD panel while cleaning the sensor.
• This camera may generate a vibration sound while cleaning the CMOS sensor. It is not a malfunction.
1
Turn the camera off and remove the lens.
2
Turn the camera on.
3
Select [Sensor Cleaning] in the [R Set-up 4] menu and
press the four-way controller (5).
The [Sensor Cleaning] screen appears.
11
344
4
Press the four-way controller (2) to select [Mirror Up] and press
the 4 button.
The mirror is locked in the up position.
If you used Dust Alert to detect dust on the sensor within the last 30 minutes, the
Dust Alert image appears on the monitor.
Clean the sensor while checking the location of the dust.
5
Clean the CMOS sensor.
Use a brush-less blower to remove dirt and dust from the CMOS sensor. Using a blower with a brush may scratch the
CMOS sensor. Do not wipe the CMOS sensor with a cloth.
Sensor Cleaning
Raises mirror and opens shutter for access to clean sensor.
Turn the power off to finish
Mirror Up
Cancel
OK OK
6
Turn off the camera.
7
Attach the lens after the mirror returns to its original position.
11
Optional Accessories
A number of dedicated accessories are available for this camera. Contact a PENTAX Service Center for details regarding accessories.
Products marked with an asterisk (*) are the same as those supplied with the camera.
Power Supply Accessories
Battery Charger kit K-BC90 (*)
(Kit includes Battery Charger D-BC90 and AC plug cord.)
Rechargeable Lithium-ion Battery D-LI90 (*)
AC Adapter kit K-AC50
(Kit includes AC Adapter D-AC50 and AC plug cord.)
Lets you power your camera from an AC outlet.
Battery Grip D-BG4
The Battery Grip has features such as a shutter release button, front e-dial, rear e-dial, and L button to accommodate shooting vertically. In addition to the rechargeable lithium-ion battery D-LI90, AA lithium/Ni-MH/ alkaline batteries can also be used in the battery grip to power the camera.
The battery charger and AC adapter are only sold as a kit respectively.
345
11
346
Flash Accessories
Auto Flash AF540FGZ
Auto Flash AF360FGZ
The AF540FGZ and AF360FGZ are P-
TTL auto flash units with a maximum guide number of 54 and 36 (ISO 100/m), respectively. Their features include slave-sync flash, contrast-control-sync flash, high-speed sync flash, wireless flash, slow-speed sync and trailing curtain sync flash.
AF540FGZ
AF360FGZ
11
Auto Flash AF200FG
The AF200FG is a P-TTL auto flash unit with a maximum guide number of 20
(ISO 100/m). It features contrastcontrol-sync flash and slow-speed sync flash when combined with an
AF540FGZ or AF360FGZ unit.
Auto Macro Flash AF160FC
The AF160FC is a flash system especially designed for macro photography to take close, shadowless pictures of small objects. It is compatible with existing TTL auto flash functions and it can be used with a wide range of
PENTAX cameras by using provided adapter rings.
AF200FG
AF160FC
347
Hot Shoe Adapter F
G
Extension Cord F5P
Hot Shoe Adapter F
G
Off-camera Shoe Adapter F
Use the adapters and cords to use the external flash away from the camera.
Off-camera Shoe Adapter F
Off-camera Shoe Clip CL-10
When using the AF540FGZ or
AF360FGZ as a wireless flash, this large clip is used for setting the external flash on a desk or table.
Off-camera Shoe Clip CL-10
For Viewfinder
Magnifier Eyecup O-ME53
This viewfinder accessory is for magnifying up to approximately 1.18 times.
When the eyecup is attached to the X with a viewfinder magnification of approximately 0.92 times, the combined magnification becomes approximately 1.09 times, making manual focusing much easier.
Magnifier F
B
This viewfinder accessory is for magnifying the central area of the viewfinder 2×.
You can see the entire view by simply flipping up the accessory from the eyepiece, as it is a hinge-type magnifier.
Magnifier Eyecup O-ME53
Magnifier F
B
11
348
Ref-converter A
This is an accessory that changes the viewfinder viewing angle at 90° intervals. The viewfinder magnification can be switched between 1× and 2×.
Ref-converter A
Diopter correction lens adapter M
This accessory adjusts the diopter.
Install it on the viewfinder.
If it is difficult to see the viewfinder image clearly, choose one of the eight correction of approximately -5 to +3m -1
(per meter).
ME Viewfinder Cap (*)
Eyecup F
R
(*)
Diopter correction lens adapter M
Interchangeable Focusing Screen
AF Frame Matte MF-60 (*) AF Divided Matte ML-60
11
M60
AF Scale Matte MI-60
M60
M60
Plain Matte ME-60
M60
349
Cable Switch CS-205
Connect to the cable release terminal and operate the camera shutter release button. The cord length is 0.5 m.
Remote Control
Used for Remote Control shooting.
Operating distance for remote control
From the front of camera: approx. 4 m
From the back of camera: approx. 2 m
Remote Control F
Remote Control Waterproof O-RC1
Camera Case/Strap
Camera Case O-CC90
Camera Strap O-ST53 (*)
11
350
Imagesensor Cleaning Kit O-ICK1
Use this kit to clean the optical parts such as the CMOS sensor and lens of this camera.
Others
Body Mount Cap K
Hot Shoe Cover F
K
(*)
USB Cable I-USB7 (*)
AV Cable I-AVC7 (*)
Sync Socket 2P Cap (*)
11
Error Messages
351
Error message
Memory card full
No image
This image cannot be displayed
No card in the camera
Cannot use this card
Memory card error
Card is not formatted
Card is locked
The card is electronically locked
This image cannot be enlarged
This image is protected
Description
The SD Memory Card is full and no more images can be saved. Insert a new SD Memory
Card or delete unwanted images. (p.55, p.84)
Data may be saved when you perform the following operations.
• Change the file format to JPEG. (p.202)
• Change the JPEG Recorded Pixels or JPEG
Quality setting. (p.200, p.201)
There are no images that can be played back on the SD Memory Card.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on another brand of camera or your computer.
The SD Memory Card is not inserted in the
The inserted SD Memory Card is not compatible with this camera.
The SD Memory Card has a problem, and image capture and playback are impossible. It may be viewable on a computer but not with this camera.
The SD Memory Card you have inserted is unformatted or has been formatted on another device and is not compatible with this camera.
Use the card after formatting it with this camera.
The write-protect switch on an SD Memory
Card you have inserted is locked. Unlock the
Data is protected by an SD Memory Card security feature.
You are trying to enlarge an image that cannot be enlarged.
You are trying to delete an image that is protected. Remove protection from the image.
11
352
11
Error message
Battery depleted
Not enough battery power remaining to clean sensor
Not enough battery power remaining to activate Pixel Mapping
Image folder cannot be created
Unable to store image
Settings not stored
The operation could not be completed correctly
No more images can be selected
No image can be processed
This image cannot be processed
The camera failed to create an image
Camera overheated.
Disabling Live View temporarily to protect circuitry
Description
The battery is exhausted. Install a fully charged
Appears during sensor cleaning if the battery level is insufficient. Install a fully charged battery or use an AC adaptor kit K-AC50
Appears during pixel mapping if the battery level is insufficient. Install a fully charged battery or use an AC adaptor kit K-AC50
The maximum folder number (999) and file number (9999) are being used, and no more images can be saved. Insert a new SD Memory
Card or format the card. (p.281)
The image could not be saved because of an
SD Memory Card error.
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted
images and perform DPOF setting again. (p.84)
The camera was unable to measure the manual white balance or detect dust on the sensor. Try
the operation again. (p.208, p.341)
You cannot select 100 or more images at a time
for Index (p.243) and Select & Delete (p.250).
There are no images that can be processed
using Digital Filter (p.265) or RAW
Appears when you try to perform Save as
Manual WB (p.213), Resize (p.262), Cropping
(p.263), Digital Filter (p.265), or RAW
Development (p.271) for images captured with
other cameras, or when you try to perform
Resize or Cropping for minimum file size images.
The creation of an index print image failed.
Live View cannot be used because the camera’s internal temperature is too high.
Press the 4 button and try using Live View again when the camera has cooled down.
Error message
Cannot start Live View
This function is not available in the current mode
Description
Appears if Live View is started when [27. Using
Aperture Ring] is set to [Prohibited] in the [A
Custom Setting 4] menu and the lens aperture ring is set to a position other than s, or a lens without an s position is being used.
You are trying to set a function that is not available in B (Green) or C (Movie) mode.
353
11
354
Troubleshooting
11
In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the battery out and putting it back in again. When the mirror remains in the up position, take the battery out and put it back in again. Then, the mirror will retract when the camera is turned on again. After these procedures are done, if the camera operates correctly, it does not require any repairs.
We recommend checking the following items before contacting a service center.
The camera does not turn on
Problem
The shutter cannot be released
Autofocus does not work
The battery is not installed
The battery power is low
Cause
The lens aperture ring is set to other than the s position
Remedy
Check if a battery is installed. If not, install a fully charged battery.
Replace with a fully charged battery or use
the AC adapter kit K-AC50 (optional). (p.53)
Set the lens aperture ring to the s position
(p.102) or select [Permitted] in [27. Using
Aperture Ring] of the [A Custom Setting 4]
The built-in flash is charging
There is no available space on the SD
Memory Card
Recording
The subject is difficult to focus on
The subject is not in the focusing area
The subject is too close
Wait until charging is finished.
Insert an SD Memory Card with available
space or delete unwanted images. (p.55,
Wait until recording is finished.
Autofocus cannot focus well on subjects that have low contrast (the sky, white walls, etc.), dark colors, intricate designs, rapidlymoving objects or scenery shot through a window or a net-like pattern. Lock focus on another object located at the same distance as your subject, then aim at the target and press the shutter release button fully.
Alternatively, use manual focus. (p.132)
Position the subject in the focus frame in the middle of the viewfinder. If the subject is outside the focusing area, aim the camera at the subject and lock the focus, then compose a picture and
press the shutter release button fully. (p.130)
Move away from the subject and take a picture.
355
Problem
Autofocus does not work
The focus cannot be locked
The AE Lock function does not operate
The built-in flash does not discharge
The exposure mode is set to B, p or M mode
The exposure mode is set to B mode
Cause
The focus mode is set to \
The focus mode is set to k
Remedy
Set the focus mode lever to l or A.
Autofocus is not locked (focus lock) when the focus mode is set to k (A). The camera will continue focusing on the subject while the shutter release button is pressed halfway. If there is a subject that you wish to focus on, slide the focus mode lever to l
and use the focus lock. (p.130)
Set the exposure mode to any mode other than B (Green), p (Bulb) or M (Flash Xsync Speed).
Only C (Auto Flash Discharge) and D
(Auto Flash+Red-eye Reduction) are available for the flash mode when the exposure mode is B (Green). The flash will not discharge when the subject is bright in these modes. In the exposure modes other than B, only the flash mode that discharges every time the flash recharges is available. Try different exposure modes.
The USB connection with a computer does not work properly
The USB connection mode is set to [PTP]
The Shake
Reduction function is off
Set [USB Connection] to [MSC] in the [R
Set [Shake Reduction] to k (On) in the
Shake
Reduction does not work
The Shake
Reduction function is not set properly
Shutter speed is too low for the Shake
Reduction function to be effective when panning or shooting night scenes, etc.
The subject is too close
If a lens for which the focal length information cannot be obtained is used, set the focal length in the [Input Focal Length]
Turn off the Shake Reduction function and use a tripod.
Move away from the subject, or turn off the
Shake Reduction function and use a tripod.
11
356
Main Specifications
11
Model Description
Type
Lens Mount
Compatible Lens
TTL autofocus, auto-exposure SLR digital-still camera with built-in retractable P-TTL flash
PENTAX K
AF2
bayonet mount (AF coupler, lens information contacts, K-mount with power contacts)
K
AF3
, K
AF2
(power zoom compatible), K
AF
, K
A
mount lenses
Image Capture Unit
Image Sensor
Effective Pixels
Total Pixels
Dust Removal
Sensitivity (Standard
Output)
Primary color filter, CMOS, Size: 23.7 x 15.7 (mm)
Approx. 16.28 megapixels
Approx. 16.93 megapixels
Image sensor cleaning using ultrasonic vibrations “DR II” with the Dust Alert function
AUTO/100 to 12800 (EV steps can be set to 1 EV, 1/2 EV or 1/
3 EV), expandable from ISO 80 to ISO 51200. Up to ISO 1600 in p mode.
Image Stabilizer
Type
Effective
Compensation
Range
CMOS image sensor shift
Up to 4 EV (depending on the used lens type and shooting conditions)
File Formats
File Format
Recorded Pixels
Quality Level
Color Space
Storage Medium
Storage Folder
RAW (PEF/DNG), JPEG (Exif 2.21), DCF2.0 compliant
JPEG: p (4928×3264 pixels), J (3936×2624 pixels), P
(3072×2048 pixels), i (1728×1152 pixels)
RAW: p (4928×3264 pixels)
RAW (14bit): PEF, DNG JPEG: Z (Premium), C
(Best), D (Better), E (Good), RAW + JPEG simultaneous capturing compatible sRGB, AdobeRGB
SD/SDHC Memory Card
Date (100_1018,101_1019...)/
PENTX (100PENTX, 101PENTX...)
Viewfinder
Type
Coverage (FOV)
Pentaprism Finder
Approx. 100%
Magnification Approx. 0.92× (50 mm F1.4 • ∞)
Eye-Relief Length
Approx. 21.7 mm (from the view window), Approx. 24.5 mm
(from the center of lens)
Diopter Adjustment Approx. -2.5 to +1.5m
-1
Focusing Screen Interchangeable Natural-Bright-Matte III focusing screen
Live View
Type
Focusing Mechanism
Display
TTL method using CMOS image sensor
Contrast detection + Face detection, Contrast detection, Phase matching
Field of View approx. 100%, Magnified view (= mode: 2×, 4×,
6×/\ mode: 2×, 4×, 6×, 8×, 10×), Grid display (4×4 Grid,
Golden Section, Scale display), Bright/dark area warning,
Histogram
357
LCD Monitor
Type
Size
Dots
Adjustment
Preview
Type
Wide viewing angle TFT color LCD
3.0 inches
Approx. 921,000 dots
Brightness and colors adjustable
Optical preview, digital preview
White Balance
Auto
Preset
Manual
Fine Adjustment
TTL method using CMOS image sensor
Daylight, Shade, Cloudy, Fluorescent Light (D: Daylight Color,
N: Daylight White, W: Cool White, L: Warm White), Tungsten
Light, Flash, f, Manual, Color Temperature
Configuration using the display screen (up to 3 settings can be saved), Color Temperature settings (up to 3 settings can be saved), Copying the white balance setting of a captured image
Adjustable ±7 steps on A-B axis and/or G-M axis
11
358
Autofocus System
Type
Focus Sensor
Brightness Range
AF Mode
AF Point Selection
AF Assist Light
TTL: phase-matching autofocus
SAFOX IX+, 11 points (9 cross type focus points in the center)
EV-1 to 18 (ISO100)
Single AF (l), Continuous AF (k)
Focus priority or shutter priority mode for l
Focus priority or FPS priority mode for k
Auto: 5 points, Auto: 11 points, Select, Center
Dedicated LED AF assist light
Metering
Type
Exposure
Compensation
Exposure Mode
EV Compensation
Steps
AE Lock
TTL open aperture, 77 segmented metering, center-weighted and spot metering
EV0 to 22 (ISO100 50mm F1.4)
Green, Program, Sensitivity Priority, Shutter Priority, Aperture
Priority, Shutter & Aperture Priority, Manual, Bulb, Flash X-sync
Speed
±5 EV (1/2 EV steps or 1/3 EV steps can be selected)
Available via dedicated AE Lock button (timer type: two times the meter operating time set in Custom Setting); Continuous as long as the shutter button is halfway pressed.
Shutter
Type
Shutter Speed
Electronically controlled vertical-run focal-plane shutter
Auto: 1/8000 to 30 sec., Manual: 1/8000 to 30 sec. (1/3 EV steps or 1/ 2EV steps), Bulb
11
Drive Modes
Mode Selection
Continuous Shooting
Single frame, Continuous (Hi, Lo), Self-timer (12s, 2s), Remote
Control (immediately, 3 sec., continuous), Auto Bracketing (2, 3 or
5 frames), Auto Bracketing + Self-timer, Auto Bracketing +
Remote Control, Mirror Lock-up, Mirror Lock-up + Remote Control
Max. approx. 7.0 fps, JPEG (p•C•Continuous Hi): up to approx. 30 frames, RAW: up to approx. 8 frames
Max. approx. 1.6 fps, JPEG (p•C•Continuous Lo): until
SD Memory Card is full, RAW: up to approx. 10 frames
Flash
Built-in Flash
Built-in P-TTL flash with serial control, GN: approx. 13 (ISO100/m)
Angle of view: equivalent to angle of view of 28mm lens (35mm format equivalent)
P-TTL, Red-eye Reduction, Slow-speed Sync, Trailing Curtain
Sync, High-Speed Sync and Wireless Sync are also available with PENTAX dedicated external flash.
1/180 sec.
-2.0 to +1.0EV
359
Flash Mode
Sync Speed
Flash Exposure
Compensation
Capture Functions
Custom Image
Bright, Natural, Portrait, Landscape, Vibrant, Muted, Bleach
Bypass, Reversal Film, Monochrome
Slow Shutter Speed NR, High-ISO NR Noise Reduction
Dynamic Range
Setting
Lens Correction
Cross Processing
Digital Filter
Highlight Correction, Shadow Correction
Distortion Correction, Lateral Chromatic Aberration Correction
Random, Preset 1-3, Favorite 1-3
Toy Camera, Retro, High Contrast, Extract Color, Soft,
Starburst, Fish-eye, Custom Filter
HDR Capture
Multi-exposure
Auto, Standard, Strong 1, Strong 2, Strong 3, Automatic composition correction function
Select the number of shots between 2 and 9. Auto EV adjustment available.
Interval Shooting
Extended Bracketing
Capture Interval setting (1 sec. to 24 hr.), Start Interval setting
(immediate, designated time), Captures up to 999 images
White Balance, Saturation, Hue, High/Low Key Adj, Contrast,
Sharpness
Horizon Correction SR On: adjusts up to 1 degree, SR Off: adjusts up to 2 degrees
Composition
Adjustment
Electronic Level
Adjustment range of ±1.5 mm up, down, left or right (1 mm when rotated); rotating range of 1 degree
Displayed in viewfinder (horizontal direction only); displayed on
LCD monitor (horizontal direction and vertical direction)
Movie
File Format
Recorded Pixels
Quality Level
Sound
Recording Time
Custom Image
Cross Processing
Motion JPEG (AVI) a (1920×1080, 16:9, 25 fps), b (1280×720, 16:9, 30 fps/
25 fps), c (640×480, 4:3, 30 fps/25 fps)
C (Best), D (Better), E (Good)
Built-in monaural microphone, external stereo microphone terminal
Up to 25 minutes; automatically stops recording if the internal temperature of the camera becomes high.
Bright, Natural, Portrait, Landscape, Vibrant, Muted, Bleach
Bypass, Reversal Film, Monochrome
Random, Preset 1-3, Favorite 1-3
11
360
Digital Filter Toy Camera, Retro, High Contrast, Extract Color, Color
Playback Functions
Playback View
Delete
Digital Filter
RAW Development
Edit
Single frame, image comparison, multi-image display (4, 9, 16,
36, 81 segmentation), display magnification (up to 32x, scrolling and quick magnification available), rotating, histogram
(Y histogram, RGB histogram), bright/dark area warning, detailed information display, copyright information display
(photographer, copyright holder), folder display, calendar display, slideshow
Delete single image, delete all, select & delete, delete folder, delete instant review image
Toy Camera, Retro, High Contrast, Sketch Filter, Water Color,
Pastel, Posterization, Miniature, Base Parameter Adjustment,
Monochrome, Color, Extract Color, Soft, Starburst, Fish-eye,
Slim, HDR, Custom Filter
File Format (JPEG, TIFF), Custom Image, White Balance,
Sensitivity, High-ISO NR, Shadow Correction, Distortion
Correction, Lateral Chromatic Aberration Correction, Color
Space
Resize, Cropping (Aspect ratio and Slant adjustment available), Index, Movie Edit (Divide or delete selected frames),
Capturing a JPEG still picture from a movie
11
Customization
User Mode
Custom Functions
Mode Memory
Custom Button
Text Size
World Time
Language
AF Fine Adjustment
Copyright Information
Up to 5 settings can be saved.
27 items
13 items
|/Y button (One Push File Format, Exposure Bracketing,
Digital Preview, Electronic Level, Composition Adjustment)
= button (Enable AF, Cancel AF)
Electrical dial customizable specifically to each exposure mode.
Standard, Large
World Time settings for 75 cities (28 time zones)
English, French, German, Spanish, Portuguese, Italian, Dutch,
Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish,
Greek, Russian, Korean, Traditional Chinese, Simplified
Chinese, and Japanese
±10 steps, uniform adjustment, individual adjustment (up to 20 can be saved)
Names of “Photographer” and “Copyright Holder” are embedded to the image file.
Revision history can be checked using the provided software.
Power Supply
Battery Type
AC Adapter
Battery Life
Rechargeable Lithium-ion Battery D-LI90
AC Adapter kit K-AC50 (optional)
Number of recordable images (with 50% flash usage): approx.
740 images,
(without flash usage): approx. 980 images
Playback time: approx. 440 minutes
* Tested in compliance with CIPA standard. Actual results may vary depending on the shooting conditions/circumstances.
Interfaces
Connection Port
USB 2.0 (high-speed compatible)/AV output, DC input, Cable switch, X-sync socket, HDMI output, Stereo microphone
USB Connection MSC/PTP
Video Output Format NTSC/PAL
361
Dimensions and
Weight
Dimensions
Weight
Approx. 131 mm (W) × 97 mm (H) × 73 mm (D) (excluding protrusions)
Approx. 660 g (body only), Approx. 740 g (including dedicated battery and SD Memory Card)
Accessories
Package Contents
Software
USB Cable I-USB7, AV Cable I-AVC7, Strap O-ST53, ME
Viewfinder Cap, Rechargeable Lithium-ion Battery D-LI90,
Battery Charger D-BC90, AC plug cord, Software (CD-ROM)
S-SW110
<Mounted on the camera> Eyecup F
R
, Hot shoe cover F
K
, Body mount cover, Sync socket 2P cap
PENTAX Digital Camera Utility 4
11
362
Glossary
AdobeRGB
Color space recommended by Adobe Systems, Inc. for commercial printing. Wider range of color reproduction than sRGB. Covers most of the color range so colors only available when printed are not lost when editing images on a computer. When an image is opened by non-compatible software, the colors look lighter.
Auto Bracketing
For automatically changing exposure. When the shutter release button is pressed, several images are captured. One has no compensation, one or more are underexposed, and one or more are overexposed. This camera features Exposure Bracketing that captures images in different exposures, and Extended Bracketing that captures images with set White Balance,
Saturation, Hue, High/Low Key Adjustment, Contrast and Sharpness levels.
AE Metering
Brightness of subject is measured to determine exposure. In this camera, select from [Multi-segment Metering], [Center-weighted Metering] and [Spot Metering].
AF point
Position in the viewfinder that determines focus. In this camera, select from [Auto], [Select] and [Center].
Aperture
The aperture increases or reduces the light beam (thickness) passing through the lens to the CMOS sensor.
Bright Portion
Overexposed area in an image loses contrast and appears white.
11
Camera Shake (Blur)
When the camera moves while the shutter is open, the entire image appears blurred. This occurs more often when shutter speed is low.
Prevent camera shake by raising the sensitivity, using the flash, and raising the shutter speed. Alternatively, use a tripod to stabilize the camera. As camera shake is most likely to occur when pressing the shutter release button, use the Shake Reduction function, Self-timer or Remote
Control shooting to prevent camera movement.
363
CMOS sensor
Photography element which converts light entering through the lens into electric signals that create an image.
Color Space
A defined range of colors from the spectrum which are used. In digital cameras, [sRGB] is defined as the standard by Exif. In this camera,
[AdobeRGB], which supports a wider color gamut than sRGB, can be also used.
Color Temperature
This numerically expresses the color of the light source illuminating the subject. This is indicated in absolute temperature, using Kelvin (K) units.
The color of light shifts to a bluish color as the color temperature rises, and to a reddish color as the color temperature falls.
Dark Portion
Underexposed area in an image loses contrast and appears black.
DCF (Design rule for Camera File system)
A digital camera file system standard established by the Japan Electronics and Information Technology Industries Association (JEITA).
Depth of field
Area of focus. This depends on the aperture value, lens focal length, and distance to the subject. For example, select a smaller aperture value
(higher number) to increase the depth of field or use a larger aperture value (smaller number) to decrease the depth of field.
DNG RAW file
DNG (Digital Negative) is a general-purpose RAW file format designed by
Adobe Systems. When images captured in proprietary RAW formats are converted to DNG format, support and compatibility for the images increases significantly.
11
DPOF (Digital Print Order Format)
Rules for writing information onto a card with recorded images regarding the specific images and number of copies to be printed. Prints can easily be made by taking the images to a DPOF photo printing store.
364
Dynamic Range (D-Range)
Indicated with a value expressing the light level reproducible in an image.
This is the same as the term “Exposure latitude” used with silver halide film.
Generally, when the dynamic range is wide, overexposed and/or underexposed areas are less likely to occur within the image, and when the dynamic range is narrow, all image tones can be reproduced sharply and accurately.
EV (Exposure Value)
Exposure value is determined by a combination of the aperture value and the shutter speed.
EV Compensation
Process of adjusting the image brightness by changing the shutter speed and/or aperture value.
Exif (Exchangeable image file format for digital still camera)
A standard digital camera file format established by the Japan Electronics and Information Technology Industries Association (JEITA).
Exif-JPEG format
Exif stands for Exchangeable Image File Format. This image file format is based on the JPEG image data format, and allows thumbnail images and image properties to be embedded into the data. Software that does not support this format processes the image as a regular JPEG image.
Exif-TIFF format
Exif stands for Exchangeable Image File Format. This image file format is based on the TIFF image data format, and allows thumbnail images and image properties to be embedded into the data. Software that does not support this format processes the image as a regular TIFF image.
11
Histogram
A graph that shows the darkest and brightest points in an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. This is useful when you check the exposure level of an image.
365
ISO Sensitivity
The level of sensitivity to light. With a high sensitivity, images can be shot with a high shutter speed even in dark places, reducing camera shake.
However, images taken with a high sensitivity are more susceptible to noise.
JPEG
An image compression format. Although the image quality deteriorates a little, images can be compressed to a smaller file size than with TIFF and other formats. In this camera, select from Z (Premium), C (Best),
D (Better), or E (Good). Images recorded in JPEG format are suited for viewing on your computer or attaching to e-mail.
Mired
Proportional scale of measurement that consistently shows color change per unit. Determined by multiplying the inverse of the color temperature by
1,000,000.
ND (Neutral Density) Filter
A filter with many saturation levels that adjusts the brightness without affecting the color tone of pictures.
Noise Reduction
Process to reduce noise (image roughness or unevenness) caused by slow shutter speed or high sensitivity shooting.
NTSC/PAL
These are video output formats. NTSC is mainly used in Japan, North
America, and South Korea. PAL is mainly used in Europe and China.
Quality Level
This refers to the image compression ratio. The lower the compression, the more detailed the image. The image becomes rougher as the compression rate rises.
11
366
RAW data
Unedited image data output from the CMOS sensor. RAW data is data before being internally processed by the camera. Camera settings at the time of capture, such as White Balance, Contrast, Saturation, and
Sharpness can be set for each frame after shooting. In addition, RAW data is 14 bit data that contain 64 times the information of 8 bit JPEG data. Rich gradations are possible. Transfer RAW data to your computer and use the provided software to create image data with different settings, such as
JPEG or TIFF.
Recorded Pixels
Indicates the size of the image by the number of pixels. The more pixels that compose a picture, the larger the image size.
Shutter Speed
The length of time that the shutter is open and light strikes the CMOS sensor. The amount of light that strikes the CMOS sensor can be changed by altering the shutter speed.
sRGB (standard RGB)
International standard of color space established by the IEC (International
Electrotechnical Commission). This is defined from color space for computer monitors and is also used as the standard color space for Exif.
Vignetting
The picture edges are blackened when part of the light coming from the subject is blocked by the hood or filter ring, or when the flash is partially blocked by the lens.
White Balance
While shooting, color temperature is adjusted to match the light source so that the subject appears to have the correct color.
11
Index
367
Symbols
| (Green) button .............21, 23
| (Preview) .........................135
.......................................91, 333
(Green) mode ...........71, 103
...................................21, 23, 83
[Q Playback] Menu ....235, 332
[A Rec. Mode] Menu .....89, 328
i (Delete) button .............23, 84
[R Set-up] Menu ..........278, 332
(Flash pop-up) button ...21, 79
.................................20, 23, 119
A
AC adapter .............................53
Accessories ..........................345
Adding the date ....................310
AdobeRGB ...................212, 362
AE Lock ........................121, 131
AE Metering .................117, 362
L button ..........21, 114, 121
AF Assist Light .........19, 72, 124
= (Autofocus) ....................122
= button ..............21, 124, 286
AF coupler ..............................19
AF Fine Adjustment ..............126
AF point switching dial ...21, 127
AF160FC ......................187, 346
AF200FG ......................187, 346
AF360FGZ ...................187, 346
AF540FGZ ...................187, 346
Aperture .........................93, 362
Aperture Priority Mode c ....109
Aperture ring ................102, 339
Aspect Ratio .................171, 263
Auto Bracketing ............ 157, 362
Auto Image Rotation ............ 236
Auto Power Off ..................... 304
Auto Screen Rotation ........... 295
F (White Balance) ......... 205
Autofocus = ...................... 122
Automatic sensitivity correction
............................................... 96
............................................. 109
AV cable ............................... 256
AV device ............................. 256
B
p (Bulb) Mode ..................... 115
Filter) .................................... 265
Battery .................................... 49
Battery grip contacts .............. 19
Beep ..................................... 288
Bright portions .............. 214, 362
Bright/Dark Area warning ..... 236
Brightness adjustment ......... 214
Brightness Level .................. 297
Brightness of the monitor ..... 297
Built-in flash ........................... 77
Bulb Mode p ........................ 115
Button Customization ........... 285
C
Cable release terminal ........... 19
Cable switch ................. 116, 349
Calendar display .................. 240
Camera shake ...................... 362
Card access lamp .................. 19
Catch-in Focus ..................... 134
Center-weighted metering .... 118
Charging the battery .............. 49
11
368
11
City names ...........................291
Cloudy (White Balance) .......205
CMOS sensor .......................363
Color (Digital Filter) ......163, 266
Color of the monitor ..............298
Color Space .................212, 363
.............................210, 211, 363
Composition Adjustment ......220
Computer .............................315
Continuous Shooting ............151
Contrast (Custom Image) .....222
Contrast AF ..........................166
(flash) ...................................196
Control panel ....................27, 40
Copyright Holder ..................307
Correct exposure ....................93
Creating folders ....................300
Cropping ...............................263
Cross Processing .................225
f (White Balance) ...........205
Custom Filter (Digital Filters)
.....................................163, 266
Custom Image ......................222
.......................................91, 333
.............................................282
D
Dark portions ................214, 363
Date Adjustment .....................67
Date change .........................289
Daylight (White Balance) ......205
Daylight-Sync shooting ..........81
DCF ......................................363
Default settings ....................328
Delete .............................84, 250
Delete all images ..................253
i (Delete) button .............23, 84
Delete folder ......................... 252
Deleting a single image .......... 84
Depth of field .................. 94, 363
Destination ........................... 289
Detailed information display ... 30
Developing RAW images ..... 271
Digital Filter .................. 162, 265
Digital Preview ..................... 138
Diopter adjustment ................. 61
Direct keys ............... 39, 88, 328
Display Color ........................ 295
Display language ................. 292
Distortion .............................. 218
DNG ..................................... 363
DPOF ................................... 363
DPOF settings ...................... 309
D-Range ....................... 214, 364
Drive Mode ............................. 88
Dust Alert ............................. 341
Dust Removal ...................... 340
Dynamic Range ........... 214, 364
E
E-Dial Programming ............. 282
E-dials .................................. 282
Electronic Level .............. 38, 299
Electronic level display ........... 28
Enlarging images ................. 237
Error message ..................... 351
EV ........................................ 364
EV Compensation ........ 119, 364
................................. 20, 23, 119
EV Steps .............................. 120
Exif ............................... 307, 364
Exposure ................................ 93
Exposure Bracketing ............ 157
Exposure Mode .............. 45, 100
............................. 108, 110, 112
Extended Bracketing ............ 160
External flash .......................187
Extra Sharpness ...................222
Extract Color (Digital Filter)
.....................................162, 266
Eyecup ...................................61
F
Face Detection AF ...............166
File Format ...........................202
File Name .............................302
File number ..........................301
Filter .............................162, 265
.............................................222
.....................................162, 266
Flash ..............................77, 181
Flash (White Balance) ..........205
...............................................82
(Flash pop-up) button ...21, 79
.............................................116
Balance) ...............................205
Focal length ..........................142
Focus indicator ...............72, 132
Focus Lock ...........................130
Focus Mode .........................122
Focus mode lever ...........21, 122
Focus point ...................127, 362
Focusing ...............................122
Folder display .......................239
Folder Name ........................300
Format ..................................281
.........................................22, 23
Frame rate ............................171
Front e-dial .......................20, 23
G
Green button ....................21, 23
369
Green mode B ............. 71, 103
Guide Display ................. 24, 293
Guide indicator ....................... 34
H
HDMI terminal ...................... 258
HDR (Digital Filter) ............... 266
HDR Capture ....................... 215
Help ...................................... 324
High Contrast (Digital Filter)
..................................... 162, 265
High dynamic range ............. 215
(Custom Image) ................... 222
High-ISO NR .......................... 98
Highlight Correction ............. 214
(flash) ................................... 189
Histogram ....................... 32, 364
Hometown ...................... 64, 289
Horizon Correction ............... 140
Hot shoe ................................. 19
Hue (Custom Image) ............ 222
Hyper-manual Mode a ........ 112
Hyper-program Mode e ...... 104
I
Image Comparison ............... 241
Image finishing tone ............. 222
Image plane indicator ............. 19
Index .................................... 243
....................... 21, 23, 25, 29, 83
Initial settings ......................... 63
Initializing ............................. 281
Input Focal Length ............... 142
Installing software ................ 320
Instant Review ............... 73, 296
Interval Shooting .................. 152
button ........................ 20, 95
ISO Sensitivity ...................... 365
11
370
11
J
JPEG ....................................365
JPEG Quality ..................57, 201
JPEG Recorded Pixels ...57, 200
K
Kelvin ...................................210
L
Language setting ............63, 292
.............................................218
LCD Color Tuning ................298
LCD panel ..............................37
Lens ...............................59, 337
Lens Correction ....................218
Lens information contacts ......19
Lens mount index ...................19
Lens unlock button ...........20, 60
Live View ..............................165
Locking the exposure ...121, 131
Locking the focus .................130
button .......................21, 168
M
a (Hyper-manual) Mode ......112
Macintosh .............................316
Main switch ................20, 23, 62
Manual focus \ .................132
Manual White Balance .........208
Mass Storage Class .............318
Matte field .............................133
Memory ................................312
Memory card ..........................55
3 button .............22, 23, 42
Menu operation ......................42
Menu page display ...............294
Meter Operating Time ..........118
.......................................21, 117
\ (Manual focus) ..............132
Microphone ....................19, 173
Miniature (Digital Filter) ........ 265
Mired ............................ 210, 365
Mirror ...................................... 19
Mirror Lock-up ...................... 149
Mirror Up .............................. 344
Mode dial ......................... 21, 45
Mode dial lock button ............. 21
Monitor ................................... 24
............................................. 265
Movie ................................... 171
Movie Editing ....................... 179
Movie playback .................... 177
MSC ..................................... 318
Multi-exposure ..................... 155
Multi-image display .............. 238
Multiple flash shooting ......... 195
Multi-segment metering ....... 117
N
ND (Neutral density) filter ..... 365
Noise Reduction ............. 98, 365
NTSC ........................... 257, 365
O
4 button ........................ 21, 23
One Push File Format .......... 203
Optical Preview .................... 137
Optional accessories ............ 345
P
e (Hyper-program) Mode .... 104
PAL .............................. 257, 365
Pastel (Digital Filter) ............. 265
PC/AV terminal .................... 256
PENTAX Digital Camera Utility 4
............................................. 320
Phase Difference AF ............ 166
Photographer information .... 307
Picture Transfer Protocol ..... 318
Pixel Mapping ...................... 311
Pixels ................................... 200
Playback .................................83
...................................21, 23, 83
Playback display ....................29
.....................................234, 331
Playback time .........................52
Playing back images continuously .........................246
Posterization (Digital Filter)
.............................................265
Power supply ..........................62
Press fully ...............................74
Press halfway .........................74
Preview ................................135
Preview Dial .........................286
Print settings ........................309
Product registration ..............325
Program Line ........................102
Program Mode e .................104
Protect ..................................254
Provided software ................320
PTP ......................................318
P-TTL (Flash) .......................193
P-TTL Auto (Flash) ...............188
Q
Quality Level ..........57, 201, 365
Quick Zoom ..........................236
R
RAW .............................202, 366
RAW Development ...............271
RAW File Format ..................203
|/Y button ...............21, 286
Rear e-dial ........................21, 23
Recorded Pixels .....57, 200, 366
Red-eye reduction ..........80, 193
Remaining image storage capacity ............................52, 58
Remote Control ............145, 349
Reset ....................................335
371
Resize .................................. 262
Retro (Digital Filter) ...... 162, 265
Rotate .................................. 249
S
............................................. 222
Save as Manual WB ............ 213
Save Settings ....................... 227
SD Memory Card ................... 55
Select & Delete .................... 250
Select Battery ....................... 305
Self-timer .............................. 143
Sensitivity ............................... 95
............................................. 105
Sensor Cleaning .......... 340, 343
Shade (White Balance) ........ 205
Shadow Correction .............. 214
Shake Reduction .................. 139
............................................. 222
Shooting information .............. 25
Show Grid ............................ 167
Shutter & Aperture Priority Mode
L ...................................... 110
Shutter Button Half Press .... 286
Shutter Priority Mode b ...... 107
................................... 20, 23, 74
Shutter speed ................. 93, 366
Sketch Filter (Digital Filter) ... 265
Slideshow ............................. 246
Slim (Digital Filter) ................ 266
Slow Shutter Speed NR ......... 99
Slow-speed Sync ................. 182
Soft (Digital Filter) ........ 162, 266
Sound ................................... 288
Speaker .................................. 19
Spot Metering ....................... 118
sRGB ........................... 212, 366
11
372
11
.....................................162, 266
Status display .......................295
Status screen .........................26
Strap .......................................48
Superimpose AF Area ....36, 127
.............................................105
T
L (Shutter & Aperture Priority) mode ....................................110
Text Size ........................64, 293
Toning (Custom Image) .......222
.....................................162, 265
Trailing Curtain Sync ....184, 194
Tungsten Light (White Balance)
.............................................205
TV .........................................256
b (Shutter Priority) Mode ....107
U
USB Connection ...................317
USB Connection mode .........317
USER Mode .........................227
V
Vertical position ......................29
Video input terminal .............256
Video output format ..............257
Viewfinder ........................35, 61
Vignetting .......................77, 366
W
Water Color (Digital Filter) ....265
White Balance ..............205, 366
Windows ...............................316
Wireless flash control ...........193
Wireless Mode (Flash) .........190
World Time ...........................289
Write-protect ...........................56
X
............................................. 116
X-sync socket ....................... 197
Z
Zoom lens .............................. 76
WARRANTY POLICY
373
All PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by nonauthorized PENTAX service facilities.
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there are no representatives of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner.
If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer’s authorized
11
374 representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
11
The CE Mark is a Directive conformity mark of the European
Union.
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
375
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply.
The lithium battery used in this camera contains perchlorate material, which may require special handling.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
11
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: PENTAX Imaging Company
A Division of PENTAX of America, Inc.
Located at: 600 12 Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number: X
Contact person: Customer Service Manager
Date and Place: October, 2010, Colorado
Information for Users on Collection and Disposal of Old
Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batteries should not be mixed with general household waste.
Used electrical/electronic equipments and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Following the implementation by member states, private households within the EU states may return their used electrical/electronic equipments and batteries to designated collection facilities free of charge*.
In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one.
*Please contact your local authority for further details.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don't purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a designation for the chemical element or compound in use. In this case you have to comply with the requirement set by the Directive for the chemicals involved.
Memo
Memo
Memo
HOYA CORPORATION
PENTAX Imaging Systems Division
PENTAX Europe Imaging
Systems S.A.S.
(European Headquarters)
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(HQ - http://www.pentaxeurope.com)
(France - http://www.pentax.fr)
PENTAX Imaging Systems
GmbH
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(http://www.pentax.de)
PENTAX Imaging Systems
Limited
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401,
U.S.A.
(PENTAX Service Department)
250 North 54th Street Chandler, Arizona 85226, U.S.A.
(http://www.pentaximaging.com)
PENTAX Canada Inc.
PENTAX Trading
(SHANGHAI) Limited
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn) http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
58192 Copyright © HOYA CORPORATION 2010
H01-201009 Printed in Philippines
SLR Digital Camera
Operating Manual
For optimum camera performance, please read the
Operating Manual before using the camera.
Download
Offentligt link opdateret
Det offentlige link til din chat er blevet opdateret. You may view and manage your chat links after registration here.
Dokument offentligt link
Annonce