Saving Images on Your Computer
317
Setting the USB Connection Mode
Set the USB connection mode when connecting to a computer via the provided USB cable (I-USB7). The default setting is [MSC].
1
Select [USB Connection] in the [R Set-up 2] menu and
press the four-way controller (5).
2
Use the four-way controller (23) to select [MSC] or [PTP].
Refer to p.318 for details.
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
HDMI Out
USB Connection
Folder Name
Create New Folder
MENU Cancel
±0
NTSC
Auto
MSC
PTP
OK OK
3
Press the 4 button.
The setting is changed.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
10
318
MSC and PTP
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the computer via USB as a memory device. Also indicates a standard for controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage
Class, you can copy, read, and write files from a computer without installing a dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without installing a device driver.
Unless otherwise specified, select MSC when connecting the X to your computer.
10
Saving Images by Connecting Your Camera and Your Computer
1
Turn your computer on.
2
Turn off your camera and use the provided USB cable to connect your camera and your computer.
3
Turn your camera on.
The camera is recognized as a removable disk or an SD Memory Card with a volume label “K-5”.
If the “K-5” dialog appears when the camera is turned on, select [Open folder to view files using Windows Explorer] and click the OK button.
4
Save the captured images to your computer.
Drag and drop the image file(s) or the folder containing the image files in your camera to the hard disk of your computer or the desktop.
5
Disconnect your camera from your computer.
319
10
