246
Playing Back Images Continuously
You can play back all images saved on your SD Memory Card successively in the slideshow.
Setting the Slideshow Display
7
Sets how images will be displayed during the Slideshow.
1
Select [Slideshow] in the [Q Playback 1] menu and press
the four-way controller (5).
The screen to make the slideshow settings appears.
2
Use the four-way controller
(23) to select an item you want to change.
Slideshow starts
Start
The following items can be changed.
Interval
Screen Effect
Repeat Playback
3sec.
MENU OK OK
Item
Interval
Screen
Effect
Repeat
Playback
Description
Select an image display interval.
Select a transition effect when the next image is displayed.
Set whether to start the slideshow again from the beginning after the last image is displayed.
Setting
3sec. (default setting)/
5sec./10sec./30sec.
Off (default setting)/Fade/
Wipe/Stripe
P (default setting)/O
3
Press the four-way controller (5) and use the four-way controller
(23) to change the setting and
press the 4 button.
Start
Interval
Screen Effect
Repeat Playback
MENU Cancel
3sec.
5sec.
10sec.
30sec.
OK OK
247
Starting the Slideshow
1
Select [Start] in Step 2 on p.246 and press the 4 button.
Or, select u (Slideshow) in the playback mode palette
and press the 4 button.
The start screen is displayed and the slideshow begins.
Start
OK
7
Available operations
4 button
Four-way controller (4)
Four-way controller (5)
Four-way controller (3)
Pauses playback. Press again to resume playback.
Shows the previous image.
Shows the next image.
Stops playback.
248
2
Stop the slideshow.
Slideshow ends when one of the following operations is performed during playback or pause.
- the four-way controller (3) is pressed
*1
- the Q button is pressed
*1
- the 3 button is pressed
*1
- the shutter release button is pressed halfway or fully
*2
- the mode dial is turned
*2
- the = button is pressed
*2
- the main switch is turned to |
*2
*1 After slideshow ends, the camera switches to normal Playback mode.
*2 After slideshow ends, the camera switches to Capture mode.
For movies, only the first frame is displayed and then the next image is displayed after the set interval has elapsed. To play a movie during a slideshow, press the 4 button while the first frame is displayed. After the movie has finished playing, the slideshow will resume.
7
