Canon PIXMA MG2450 Online Manual
Add to My manuals176 Pages
Canon PIXMA MG2450 is a versatile inkjet printer that offers a wide range of features for home and office use. With its compact design, it can easily fit into any workspace. The MG2450 delivers high-quality prints, copies, and scans, making it an ideal choice for everyday printing needs. It is also equipped with Wi-Fi connectivity, allowing you to print wirelessly from your computer, smartphone, or tablet. Additionally, the MG2450 features a variety of paper handling options, including the ability to print on envelopes and specialty papers.
advertisement
MG2400 series
Online Manual
Printing
Copying
English
Contents
Printing
Printing with Application Software that You are Using (Printer Driver)
4
Printing from a Computer
Printing with Application Software that You are Using (Printer Driver)
5
Printing with Application Software that You are Using
(Printer Driver)
Basic
Changing the Print Quality and Correcting Image Data
Overview of the Printer Driver
Sharing the Printer on a Network
6
Printing with Easy Setup
This section describes the simple procedure for setting the
Quick Setup tab so that you can
carry out appropriate printing on this machine.
1.
Check that the machine is turned on
2.
Load paper on the machine
3.
Open the
4.
Select a frequently used profile
In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
When you select a printing profile, the Additional Features, Media Type, and
Printer Paper Size settings are automatically switched to the values that were preset.
5.
Select the print quality
For Print Quality, select High, Standard, or Draft according to your purpose.
7
Important
The print quality settings that can be selected may differ depending on a printing profile.
6.
Complete the setup
Click OK.
When you execute print, the document is printed with settings that match your purpose.
8
Important
When you select the Always Print with Current Settings check box, all settings specified on the Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from the next time as well.
In the Commonly Used Settings window, click Save... to register the specified settings.
9
Setting the Media Type with the Printer Driver
When you use this machine, selecting a media type that matches the print purpose will help you achieve the best print results.
You can use the following media types on this machine.
Commercially available papers
Media name
Plain Paper (including recycled paper)
Envelopes
Media Type in the printer driver
Plain Paper
Envelope
Canon genuine papers (Photo Printing)
Media name <Model No.>
Photo Paper Plus Glossy II <PP-201>
Photo Paper Glossy <GP-501/GP-601>
Media Type in the printer driver
Photo Paper Plus Glossy II
Glossy Photo Paper
10
Various Printing Methods
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order
Registering Image Data to be Used as a Background
Displaying the Print Results before Printing
Setting Paper Dimensions (Custom Size)
Editing the Print Document or Reprinting from the Print History
11
Setting a Page Size and Orientation
The paper size and orientation are essentially determined by the application software.
When the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application software, you do not need to select them on the Page Setup tab.
When you are not able to specify them with the application software, the procedure for selecting a page size and orientation is as follows:
You can also set page size and orientation on the Quick Setup tab.
1.
Open the
2.
Select the paper size
Select a page size from the Page Size list on the Page Setup tab.
3.
Set Orientation
Select Portrait or Landscape for Orientation. Check Rotate 180 degrees check box when you want to perform printing with the original being rotated 180 degrees.
4.
Complete the setup
Click OK.
When you execute print, the document will be printed with the selected page size and the orientation.
12
Note
If Normal-size is selected for Page Layout, then Automatically reduce large
document that the printer cannot output is displayed.
Normally, you can leave the Automatically reduce large document that the printer
cannot output check box checked. During printing, if you do not want to reduce large documents that cannot be printed on the printer, uncheck the check box.
13
Setting the Number of Copies and Printing Order
The procedure for specifying the number of copies and printing order is as follows:
You can also set the number of copies on the Quick Setup tab.
1.
Open the
2.
Specify the number of copies to be printed
For Copies on the Page Setup tab, specify the number of copies to be printed.
3.
Specify the print order
Check the Print from Last Page check box when you want to print from the last page in order, and uncheck the check box when you want to print from the first page.
Check the Collate check box when you are printing multiple copies of a document and want to print out all pages in each copy together. Uncheck this check box when you want to print all pages with the same page number together.
• Print from Last Page: /Collate:
• Print from Last Page: /Collate:
14
• Print from Last Page: /Collate:
• Print from Last Page: /Collate:
4.
Complete the setup
Click OK.
When you execute print, the specified number of copies will be printed with the specified printing order.
Important
When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software. When you specify the number of copies and the printing order with both the application software and this printer driver, the number of copies may be multiplied numbers of the two settings or the specified printing order may not be enabled.
Print from Last Page appears grayed out and is unavailable when Tiling/Poster is selected for Page Layout.
When Booklet is selected for Page Layout, Print from Last Page and Collate appear grayed out and cannot be set.
When Duplex Printing (Manual) is selected, Print from Last Page appears grayed out and cannot be set.
Note
By setting both Print from Last Page and Collate, you can perform printing so that papers are collated one by one starting from the last page.
15
These settings can be used in combination with Normal-size, Fit-to-Page, Scaled,
Page Layout, and Duplex Printing (Manual).
16
Setting the Stapling Margin
The procedure for setting the staple side and the margin width is as follows:
1.
Open the
2.
Specify the side to be stapled
Check the position of the stapling margin from Stapling Side on the Page Setup tab.
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best staple position. When you want to change the setting, select from the list.
3.
Set the margin width
If necessary, click Specify Margin... and set the margin width, and then click OK.
17
Note
The printer automatically reduces the print area depending on the staple position margin.
4.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified staple side and margin width.
Important
Stapling Side and Specify Margin... appear grayed out and are unavailable when:
•
Tiling/Poster or Booklet is selected for Page Layout
•
Scaled is selected for Page Layout (When Duplex Printing (Manual) is also selected, only Stapling Side can be specified.)
18
Fit-to-Page Printing
The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be used is as follows:
1.
Open the
2.
Set fit-to-page printing
Select Fit-to-Page from the Page Layout list on the Page Setup tab.
3.
Select the paper size of the document
Using Page Size, select the page size that is set with your application software.
4.
Select the print paper size
Select the size of the paper loaded in the machine from the Printer Paper Size list.
When the Printer Paper Size is smaller than the Page Size, the page image will be
19
reduced. When the Printer Paper Size is larger than the Page Size, the page image will be enlarged.
The current settings are displayed in the settings preview on the left side of the printer driver.
5.
Complete the setup
Click OK.
When you execute print, the document will be enlarged or reduced to fit to the page size.
20
Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:
1.
Open the
2.
Set scaled printing
Select Scaled from the Page Layout list on the Page Setup tab.
3.
Select the paper size of the document
Using Page Size, select the page size that is set with your application software.
4.
Set the scaling rate by using one of the following methods:
• Select a Printer Paper Size
21
When the printer paper size is smaller than the Page Size, the page image will be reduced. When the printer paper size is larger than the Page Size, the page image will be enlarged.
• Specify a scaling factor
Directly type in a value into the Scaling box.
The current settings are displayed in the settings preview on the left side of the printer driver.
5.
Complete the setup
22
Click OK.
When you execute print, the document will be printed with the specified scale.
Important
When the application software which you used to create the original has the scaled printing function, configure the settings on your application software. You do not need to configure the same setting in the printer driver.
Note
Selecting Scaled changes the printable area of the document.
23
Page Layout Printing
The page layout printing function allows you to print more than one page image on a single sheet of paper.
The procedure for performing page layout printing is as follows:
1.
Open the
2.
Set page layout printing
Select Page Layout from the Page Layout list on the Page Setup tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the machine from the Printer Paper Size list.
Setting the layout of two pages of the document from left to right is complete.
4.
Set the number of pages to be printed on one sheet and the page order
24
If necessary, click Specify..., specify the following settings in the Page Layout
Printing dialog box, and click OK.
Pages
To change the number of pages to be printed on a single sheet of paper, select the number of pages from the list.
Page Order
To change the page arrangement order, select a placement method from the list.
Page Border
To print a page border around each document page, check this check box.
5.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
25
Tiling/Poster Printing
The tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. You can also paste the pages together to create a large print like a poster.
The procedure for performing tiling/poster printing is as follows:
Setting Tiling/Poster Printing
1.
Open the
2.
Set tiling/poster printing
Select Tiling/Poster from the Page Layout list on the Page Setup tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
26
Select the size of the paper loaded in the machine from the Printer Paper Size list.
This completes the setup for dividing the document into 2 and performing tiling/poster printing.
4.
Set the number of image divisions and the pages to be printed
If necessary, click Specify..., specify the following settings in the Tiling/Poster
Printing dialog box, and then click OK.
Image Divisions
Select the number of divisions (vertical x horizontal). As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allow you to create a larger poster.
Print "Cut/Paste" in margins
To leave out words "Cut" and "Paste", uncheck this check box.
Note
This feature may be unavailable when certain printer drivers or operating environments are used.
Print "Cut/Paste" lines in margins
To leave out cut lines, uncheck this check box.
Print page range
Specifies the printing range. Select All under normal circumstances.
To reprint only a specific page, select Pages and enter the page number you want to print. To specify multiple pages, enter the page numbers by separating them with commas or by entering a hyphen between the page numbers.
Note
You can also specify the print range by clicking the pages in the settings preview.
27
5.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document will be divided into several pages during printing.
Printing Only Specific Pages
If ink becomes faint or runs out during printing, you can reprint only the specific pages by following the procedure below:
1.
Set the print range
In the settings preview on the left of the Page Setup tab, click the pages that do not need to be printed.
The pages that were clicked are deleted, and only the pages to be printed are displayed.
Note
Click the deleted pages to display them again.
Right-click the settings preview to select Print all pages or Delete all pages.
2.
Complete the setup
After completing the page selection, click OK.
When you execute print, only specified pages will be printed.
28
Important
Since tiling/poster printing enlarges the document when printing it, the print results may become coarse.
29
Booklet Printing
The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center.
The procedure for performing booklet printing is as follows:
1.
Open the
2.
Set booklet printing
Select Booklet from the Page Layout list on the Page Setup tab.
The current settings are displayed in the settings preview on the left side of the window.
3.
Select the print paper size
Select the size of the paper loaded in the machine from the Printer Paper Size list.
4.
Set the margin for stapling and the margin width
30
Click Specify... and specify the following settings in the Booklet Printing dialog box, and then click OK.
Margin for stapling
Select which side should the stapling margin be on when the booklet is completed.
Insert blank page
To leave one side of a sheet blank, check the check box, and select the page to be left blank.
Margin
Enter the margin width. The specified width from the center of the sheet becomes the margin width for one page.
Page Border
To print a page border around each document page, check the check box.
5.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document will be printed on one side of a sheet of paper. When the printing of one side is complete, set the paper correctly by following the message and click OK.
When the printing of the other side is complete, fold the paper at the center of the margin and make a booklet.
Important
Booklet cannot be selected when a media type other than Plain Paper is selected for
Media Type on the Main tab.
Note
The stamp and background are not printed on the inserted blank sheets with the
Insert blank page function of booklet printing.
31
Duplex Printing
The procedure for printing data on both sides of a sheet of paper is as follows:
You can also set duplex printing in Additional Features on the Quick Setup tab.
1.
Open the
2.
Set duplex printing
Check the Duplex Printing (Manual) check box on the Page Setup tab.
3.
Select the layout
Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list.
4.
Specify the side to be stapled
The best Stapling Side is selected automatically from the Orientation and Page
Layout settings. To change the setting, select another stapling side from the list.
5.
Set the margin width
32
If necessary, click Specify Margin... and set the margin width, and then click OK.
6.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document is first printed on one side of a sheet of paper.
After one side is printed, reload the paper correctly according to the message.
Then click Start Printing to print the opposite side.
Important
When a media type other than Plain Paper is selected from Media Type on the Main tab, Duplex Printing (Manual) appears grayed out and is unavailable.
When Tiling/Poster or Booklet is selected from the Page Layout list, Duplex
Printing (Manual) and Stapling Side appear grayed out and are unavailable.
Note
If the back side of the paper becomes smudged during duplex printing, perform
Bottom Plate Cleaning in the Maintenance tab.
Related Topics
Cleaning Inside the Machine
Changing the Machine Operation Mode
33
Stamp/Background Printing
Stamp or Background may be unavailable when certain printer drivers or operating environments are used.
The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name. The Background function allows you to print a light illustration behind the document data.
The procedure for performing stamp/background printing is as follows:
Printing a Stamp
"CONFIDENTIAL," "IMPORTANT," and other stamps that are used often in companies are pre-registered.
1.
Open the
2.
Click Stamp/Background... (Stamp...) on the Page Setup tab
The Stamp/Background (Stamp) dialog box opens.
34
Note
With the XPS printer driver, the Stamp/Background... button has become the
Stamp... button and only the stamp function can be used.
3.
Select a stamp
Check the Stamp check box, and select the stamp to be used from the list.
The current settings are displayed in the settings preview on the left side of the Page
Setup tab.
4.
Set the stamp details
If necessary, specify the following settings, and then click OK.
Define Stamp... button
To change the stamp text, bitmap, or position
, click this.
Place stamp over text
To print the stamp on the front of the document, check this check box.
Note
The stamp is given priority because the stamp is printed over the document data in the sections where the stamp and the document data overlap. When this check box is unchecked, the stamp is printed behind the document data and may be hidden in the overlapping sections depending on the application software used.
Place stamp over text cannot be used when the XPS printer driver is used.
When the XPS printer driver is used, the stamp is normally printed in the foreground of the document.
Print semitransparent stamp
Check this check box to print a semi-transparent stamp on the document.
This function is available only when the XPS printer driver is used.
Stamp first page only
To print the stamp only on the first page, check this check box.
35
5.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified stamp.
Printing a Background
Two bitmap files are pre-registered as samples.
1.
Open the
2.
Click Stamp/Background... on the Page Setup tab
The Stamp/Background dialog box opens.
3.
Select the background
Check the Background check box, and select the background to be used from the list.
The current settings are displayed in the settings preview on the left side of the Page
Setup tab.
4.
Set the background details
If necessary, complete the following settings, and then click OK.
Select Background... button
To use another background or change the layout or density of a background , click
this.
Background first page only
To print the background only on the first page, check this check box.
5.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified background.
Note
The stamp and background are not printed on blank sheets inserted with the Insert
blank page function of booklet printing.
Related Topics
Registering Image Data to be Used as a Background
36
Registering a Stamp
This feature may be unavailable when certain printer drivers or operating environments are used.
You can create and register a new stamp. You can also change and re-register some of the settings of an existing stamp. Unnecessary stamps can be deleted at any time.
The procedure for registering a new stamp is as follows:
Registering a New Stamp
1.
Open the
2.
Click Stamp/Background... (Stamp...) on the Page Setup tab
The Stamp/Background (Stamp) dialog box opens.
37
Note
With the XPS printer driver, the Stamp/Background... button has become the
Stamp... button and only the stamp function can be used.
3.
Click Define Stamp...
The Stamp Settings dialog box opens.
4.
Configure the stamp while viewing the preview window
• Stamp tab
Select Text, Bitmap, or Date/Time/User Name that matches your purpose for
Stamp Type.
• For Text registration, the characters must already be entered in Stamp Text. If necessary, change the TrueType Font, Style, Size, and Outline settings. You can select the color of the stamp by clicking Select Color....
• For Bitmap, click Select File... and select the bitmap file (.bmp) to be used. If necessary, change the settings of the Size and Transparent white area.
• For Date/Time/User Name, the creation date/time and user name of the printed object are displayed in Stamp Text. If necessary, change the settings of TrueType Font, Style, Size, and Outline. You can select the color of the stamp by clicking Select Color....
38
Important
Stamp Text appears grayed out and is unavailable when Date/Time/User
Name is selected.
• Placement tab
Select the stamp position from the Position list. You can also select Custom from the Position list and specify coordinates for X-Position and Y-Position.
You can also change the stamp position by dragging the stamp in the preview window.
To change the stamp position angle, type a value in the Orientation box directly.
Important
Orientation cannot be changed when Bitmap is selected for Stamp Type on the Stamp tab.
5.
Save the stamp
Click the Save settings tab and enter a title in the Title box, and then click Save.
Click OK when the confirmation message appears.
Note
Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
6.
Complete the setup
Click OK. The Stamp/Background (Stamp) dialog box opens again.
The registered title appears in the Stamp list.
Changing and Registering Some of Stamp Settings
1.
Select the stamp for which the settings are to be changed
Select the Stamp check box in the Stamp/Background (Stamp) dialog box. Then from the list, select the title of the stamp to be changed.
2.
Click Define Stamp...
The Stamp Settings dialog box opens.
3.
Configure the stamp while viewing the preview window
4.
Overwrite save the stamp
39
Click Save overwrite on the Save settings tab.
When you want to save the stamp with a different title, type a new title in the Title box and click Save.
Click OK when the confirmation message appears.
5.
Complete the setup
Click OK. The Stamp/Background (Stamp) dialog box opens again.
The registered title appears in the Stamp list.
Deleting an Unnecessary Stamp
1.
Click Define Stamp... in the Stamp/Background (Stamp) dialog box
The Stamp Settings dialog box opens.
2.
Select the stamp to be deleted
Select the title of the stamp you want to delete from the Stamps list on the Save
settings tab. Then click Delete.
Click OK when the confirmation message appears.
3.
Complete the setup
Click OK. The Stamp/Background (Stamp) dialog box opens again.
40
Registering Image Data to be Used as a Background
This feature may be unavailable when certain printer drivers or operating environments are used.
You can select a bitmap file (.bmp) and register it as a new background. You can also change and register some of the settings of an existing background. An unnecessary background can be deleted.
The procedure for registering image data to be used as a background is as follows:
Registering New Background
1.
Open the
2.
Click Stamp/Background... on the Page Setup tab
The Stamp/Background dialog box opens.
41
Note
With the XPS printer driver, the Stamp/Background... button has become the
Stamp... button and Background cannot be used.
3.
Click Select Background...
The Background Settings dialog box opens.
4.
Select the image data to be registered to the background
Click Select File.... Select the target bitmap file (.bmp), and then click Open.
5.
Specify the following settings while viewing the preview window
Layout Method
Select how the background image data is to be placed.
When Custom is selected, you can set coordinates for X-Position and Y-Position.
You can also change the background position by dragging the image in the preview window.
Intensity
Set the intensity of the background image data with the Intensity slider. Moving the slider to the right darkens the background, and moving the slider to the left lightens the background. To print the background at the original bitmap intensity, move the slider to the rightmost position.
6.
Save the background
Click the Save settings tab and enter a title in the Title box, and then click Save.
Click OK when the confirmation message appears.
42
Note
Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
7.
Complete the setup
Click OK, then it returns to Stamp/Background dialog box.
The registered title appears in the Background list.
Changing and Registering Some Background Settings
1.
Select the background for which the settings are to be changed
Select the Background check box in the Stamp/Background dialog box. Then from the list, select the title of the background you want to change.
2.
Click Select Background...
The Background Settings dialog box opens.
3.
Specify each item on the Background tab while viewing the preview window
4.
Save the background
Click Save overwrite on the Save settings tab. When you want to save the background with a different title, enter a new title in the Title box and click Save.
Click OK when the confirmation message appears.
5.
Complete the setup
Click OK, then it returns to Stamp/Background dialog box.
The registered title appears in the Background list.
Deleting an Unnecessary Background
1.
Click Select Background... in the Stamp/Background dialog box
The Background Settings dialog box opens.
2.
Select the background to be deleted
Select the title of the background you want to delete from the Backgrounds list on the Save settings tab, and then click Delete.
Click OK when the confirmation message appears.
43
3.
Complete the setup
Click OK, then it returns to Stamp/Background dialog box.
44
Setting Up Envelope Printing
If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ
XPS Status Monitor" when reading this information.
The procedure for performing envelope printing is as follows:
1.
Load envelope on the machine
2.
Open the
3.
Select the media type
Select Envelope from Commonly Used Settings on the Quick Setup tab.
4.
Select the paper size
When the Envelope Size Setting dialog box is displayed, select Envelope Com 10,
Envelope DL, and then click OK.
5.
Set the orientation
To print the addressee horizontally, select Landscape for Orientation.
6.
Select the print quality
45
Select High or Standard that matches your purpose for Print Quality.
7.
Complete the setup
Click OK.
When you execute print, the information is printed on the envelope.
46
Displaying the Print Results before Printing
If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS
Preview" when reading this information.
You can display and check the print result before printing.
The procedure for displaying the print result before printing is as follows:
You can also set the print results display on the Quick Setup tab.
1.
Open the
2.
Set the preview
Check the Preview before printing check box on the Main tab.
3.
Complete the setup
Click OK.
When you execute print, the Canon IJ Preview opens and displays the print results.
Important
In the Manual Color Adjustment dialog box, the Color Adjustment tab contains the
Print a pattern for color adjustment check box. When this check box is selected, the
Preview before printing appears grayed out and is unavailable.
Related Topic
47
Setting Paper Dimensions (Custom Size)
You can specify the height and width of paper when its size cannot be selected from the
Page Size. Such a paper size is called "custom size."
The procedure for specifying a custom size is as follows:
You can also set a custom size in Printer Paper Size on the Quick Setup tab.
1.
Set the custom size in the application software
Specify the custom size in the paper size setting of your application software.
Important
When the application software that created the document has a function for specifying the height and width values, use the application software to set the values. When the application software does not have such a function or if the document does not print correctly, use the printer driver to set the values.
2.
Open the
3.
Select the paper size
Select Custom... for Page Size on the Page Setup tab.
The Custom Paper Size dialog box opens.
48
4.
Set the custom paper size
Specify Units, and enter the Width and Height of the paper to be used. Then click
OK.
5.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified paper size.
49
Editing the Print Document or Reprinting from the Print
History
This function is unavailable when the standard IJ printer driver is used.
In the Canon IJ XPS preview window, you can edit the print document or retrieve the document print history to print the document.
The procedure for using the Canon IJ XPS Preview is as follows:
Combine Documents
Delete Document
Reset Documents
View Thumbnails
Move Document
Undo
Move Page
Delete Page
Note
Click View Thumbnails to view all print pages of the print document selected from the Document Name list.
To hide the print pages, click View Thumbnails again.
Clicking Undo reverses the change that just performed.
50
Editing and Printing a Print Document
When printing multiple documents or pages, you can combine documents, change the print sequence of the documents or pages, or delete documents or pages.
1.
Open the
2.
Set the preview
Check the Preview before printing check box on the Main tab.
3.
Complete the setup
Click OK.
The Canon IJ XPS Preview will start and the print result will be displayed before printing.
4.
Editing print documents and print pages
• Combining print documents
You can combine multiple print documents to form a single document.
To select multiple print documents, hold down the Ctrl key and click the documents to be merged, or hold down the Shift key and press the upper arrow or lower arrow key.
You can also click a blank area in the document list and drag the mouse to select multiple documents.
By combining print documents, you can prevent blank pages from being inserted when you execute duplex printing or page layout printing.
From the Document Name list, select the documents to be combined. On the
Edit menu, select Combine Documents from Documents to combine the documents in the listed sequence. When you combine documents, the documents selected before the combining are deleted from the list and the combined document is added to the list.
• Changing the sequence of print documents or print pages
• To change the sequence of the print documents, go to the Document Name list, and select the print document to be moved. Next, on the Edit menu, select
Move Document from Documents, and select the appropriate item. You can also click and drag a print document to change the print sequence.
• To change the sequence of the print pages, click View Thumbnails from the
Option menu, and select the print page to be moved. Next, on the Edit menu,
51
select Move Page from Pages, and select the appropriate item. You can also click and drag a print page to change the print sequence.
• Deleting print documents and print pages
• To delete a print document, select the target document from the Document
Name list, and on the Edit menu, choose Documents and then Delete
Document.
• To delete a print page, click View Thumbnails from the Option menu, and select the print page to be deleted. Next, on the Edit menu, select Delete
Page from Pages.
• Print page recovery
You can recover pages that were deleted with Delete Page.
To recover pages, select the View Deleted Pages check box from the Option menu, and select the pages to be recovered from among the displayed thumbnail pages. Then from the Edit menu chose Pages and then Restore Page.
After editing the print documents or print pages, you can change the print settings on the Page Information, Layout and Manual Color Adjustment tabs as necessary.
Important
To display the multiple documents in the list, open the preview and execute print again.
To return the print documents to their original condition before they were edited in the preview, on the Edit menu, select Reset Documents from Documents.
If the documents to be combined have different print settings, a message may be displayed.
Check the contents of the displayed message before combining the documents.
If the documents to be combined have different output paper sizes and duplex printing or page layout printing is to be performed, the printer may not produce the expected print results for certain print pages.
Check the preview before printing.
Depending on the print settings of the print document, some functions may not be available in the Canon IJ XPS preview.
Note
You can rename Document Name to any name.
5.
Executing print
52
Click Print.
When you execute print, the printer uses the specified settings to print the data.
Reprinting from the Print History
When you click Save Print History on the File menu to enable the setting, the document printed from the preview is saved, and you can reprint the document with the same settings.
1.
Displaying the print history
Open the printer driver setup window
. Then on the Maintenance tab, select View
Print History.
The saved print document is displayed in the preview.
Important
To limit the number of print history registrations, click History Entry Limit on the File menu.
If the limit on the number of registration is exceeded, the print history registrations are deleted starting from the oldest one.
2.
Selecting a print document
From the Document Name list, select the document to be printed.
3.
Executing print
Click Print.
Related Topic
Displaying the Print Results before Printing
53
Changing the Print Quality and Correcting Image Data
Setting the Print Quality Level (Custom)
Printing a Color Document in Monochrome
Optimal Photo Printing of Image Data
Adjusting Colors with the Printer Driver
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
54
Setting the Print Quality Level (Custom)
The print quality level can be set in the Custom.
The procedure for setting the print quality level is as follows:
1.
Open the
2.
Select the print quality
On the Main tab, select Custom for Print Quality, and click Set....
The Custom dialog box opens.
3.
Setting the print quality level
Drag the slider bar to select the print quality level and click OK.
4.
Complete the setup
Click OK on the Main tab.
When you execute print, the image data is printed with the selected print quality level.
55
Important
Certain print quality levels cannot be selected depending on the settings of Media
Type.
Related Topics
56
Printing a Color Document in Monochrome
The procedure for printing a color document in monochrome is as follows:
You can also set a grayscale printing in Additional Features on the Quick Setup tab.
1.
Open the
2.
Set grayscale printing
Check the Grayscale Printing check box on the Main tab.
3.
Complete the setup
Click OK.
When you execute print, the document is converted to grayscale data. It allows you to print the color document in monochrome.
Important
When the Grayscale Printing check box is checked, the printer driver processes image data as sRGB data. In this case, actual colors printed may differ from those in the original image data.
57
When using the grayscale printing function to print Adobe RGB data, convert the data to sRGB data using an application software.
Note
During Grayscale Printing, color inks may be used as well as black ink.
58
Specifying Color Correction
You can specify the color correction method suited to the type of document to be printed.
Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer. This method is suitable for printing sRGB data.
When you want to print by using the color space (Adobe RGB or sRGB) of the image data effectively, select ICM (ICC Profile Matching). When you want to use an application software to specify a printing ICC profile, select None.
The procedure for specifying color correction is as follows:
You can also set color correction on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Select color correction
Click Matching tab, select Color Correction setting that matches your purpose from the following, and click OK.
59
Driver Matching
With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer.
ICM (ICC Profile Matching)
Adjusts the colors by using an ICC profile when printing.
Specify the input profile to be used.
None
The printer driver does not perform color correction. Select this value when you are specifying an individually created printing ICC profile in an application software to print data.
4.
Complete the setup
Click OK on the Main tab.
When you execute print, the document data is printed with the specified color correction.
Important
When ICM is disabled in the application software, ICM is unavailable for Color
Correction and the printer may not be able to print the image data properly.
When the Grayscale Printing check box on the Main tab is checked, Color
Correction appears grayed out and is unavailable.
Related Topics
Optimal Photo Printing of Image Data
60
Adjusting Colors with the Printer Driver
61
Optimal Photo Printing of Image Data
When people print images taken with digital cameras, they sometimes feel that the printed color tones differ from those of actual image or those displayed on the monitor.
To get the print results as close as possible to the desired color tones, you must select a printing method that is best suited to the application software used or to your purpose.
Color Management
Devices such as digital cameras, scanners, monitors, and printers handle color differently.
Color management (color matching) is a method that manages device-dependent "colors" as a common color space.
For Windows, a color management system called "ICM" is built into the operating system.
Adobe RGB and sRGB are popularly used as common color spaces. Adobe RGB has a wider color space than sRGB.
ICC profiles convert device-dependent "colors" into a common color space. By using an
ICC profile and carrying out color management, you can draw out the color space of the image data within the color reproduction area that the printer can express.
Selecting a Printing Method Suited to the Image Data
The recommended printing method depends on the color space (Adobe RGB or sRGB) of the image data or the application software to be used.
There are two typical printing methods.
Check the color space (Adobe RGB or sRGB) of the image data and the application software to be used, and then select the printing method suited to your purpose.
Adjusting Colors with the Printer Driver
Describes the procedure for printing sRGB data by using the color correction function of the printer driver.
• To print using Canon Digital Photo Color
The printer prints data with color tints that most people prefer, reproducing colors of the original image data and producing three-dimensional effects and high, sharp contrasts.
• To print by directly applying editing and touch-up results of an application software
When printing the data, the printer brings out subtle color difference between dark and light areas, while leaving the darkest and lightest areas intact.
When printing the data, the printer applies fine adjustment results, such as brightness adjustments made with an application software.
62
Describes the procedure for printing by using the color space of Adobe RGB or sRGB effectively.
You can print with a common color space by setting up the application software and the printer driver so that the color management matches the input ICC profile of the image data.
The method for setting up the printer driver differs depending on the application software to be used.
63
Adjusting Colors with the Printer Driver
You can specify the color correction function of the printer driver to print sRGB data with color tints that most people prefer through the use of Canon Digital Photo Color.
When printing from an application software that can identify ICC profiles and allows you to specify them, use a printing ICC profile in the application software, and select settings for color management.
The procedure for adjusting colors with the printer driver is as follows:
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Select color correction
Click Matching tab, and select Driver Matching for Color Correction.
4.
Set the other items
If necessary, click Color Adjustment tab, and adjust the color balance (Cyan,
Magenta, Yellow) and adjust Brightness, Intensity, and Contrast settings, and then click OK.
5.
Complete the setup
64
Click OK on the Main tab.
When you execute print, the printer driver adjusts the colors when printing the data.
Related Topics
Setting the Print Quality Level (Custom)
65
Printing with ICC Profiles
When the image data has a specified input ICC profile, you can print by using the color space (Adobe RGB or sRGB) of the data effectively.
The printer driver setting procedure varies depending on the application software used to print.
Specify an ICC Profile from the Application Software and Print the Data
When you print the editing and touch-up results of Adobe Photoshop, Canon Digital Photo
Professional, or any application software that allows you to specify input and printing ICC profiles, you print by effectively using the color space of the input ICC profile specified in the image data.
To use this printing method, use your application software to select color management items and specify an input ICC profile and a printing ICC profile in the image data.
Even if you print using a printing ICC profile that you created yourself from your application software, be sure to select color management items from your application software.
For instructions, refer to the manual of the application software you are using.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Select color correction
Click Matching tab, and select None for Color Correction.
66
4.
Set the other items
If necessary, click Color Adjustment tab, and adjust the color balance (Cyan,
Magenta, Yellow) and adjust Brightness, Intensity, and Contrast settings, and then click OK.
5.
Complete the setup
Click OK on the Main tab.
When you execute print, the machine uses the color space of the image data.
Specify an ICC Profile with the Printer Driver, and then Print
Print from an application software that cannot identify input ICC profiles or does allow you to specify one by using the color space of the input ICC profile (sRGB) found in the data.
When printing Adobe RGB data, you can print the data with the Adobe RGB color space even if the application software does not support Adobe RGB.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Select color correction
Click Matching tab, and select ICM (ICC Profile Matching) for Color Correction.
67
4.
Select the input profile
Select an Input Profile that matches the color space of the image data.
• For sRGB data or data without an input ICC profile:
Select Standard.
• For Adobe RGB data:
Select Adobe RGB (1998).
Important
When the application software specifies an input profile, the input profile setting of the printer driver becomes invalid.
When no input ICC profiles are installed on your computer, Adobe RGB (1998) will not be displayed.
5.
Set the other items
If necessary, click Color Adjustment tab, and adjust the color balance (Cyan,
Magenta, Yellow) and adjust Brightness, Intensity, and Contrast settings, and then click OK.
6.
Complete the setup
Click OK on the Main tab.
When you execute print, the machine uses the color space of the image data.
68
Related Topics
Setting the Print Quality Level (Custom)
69
Adjusting Color Balance
You can adjust the color tints when printing.
Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software when you want to change the color balance significantly. Use the printer driver only when you want to adjust the color balance slightly.
The following sample shows the case when color balance is used to intensify cyan and to diminish yellow so that the overall colors are more uniform.
No adjustment Adjust color balance
The procedure for adjusting color balance is as follows:
You can also set color balance on the Quick Setup tab by choosing Photo Printing under
Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under
Additional Features.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
70
The Manual Color Adjustment dialog box opens.
3.
Adjust color balance
There are individual sliders for Cyan, Magenta, and Yellow. Each color becomes stronger when the corresponding slider is moved to the right, and becomes weaker when the corresponding slider is moved to the left. For example, when cyan becomes weaker, the color red becomes stronger.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver.
After adjusting each color, click OK.
71
Important
Adjust the slider gradually.
4.
Complete the setup
Click OK on the Main tab.
When you execute print, the document is printed with the adjusted color balance.
Important
When the Grayscale Printing check box on the Main tab is checked, the color balance (Cyan, Magenta, Yellow) appear grayed out and are unavailable.
Related Topics
Setting the Print Quality Level (Custom)
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
72
Adjusting Color Balance Using Sample Patterns (Printer
Driver)
You can look at the print results of pattern print and adjust the color balance.
When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values.
Described below is the procedure for adjusting the color balance while looking at the pattern.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Selecting pattern print
On the Color Adjustment tab, select the Print a pattern for color adjustment check box, and click Pattern Print preferences....
73
4.
Setting pattern print
When the Pattern Print dialog box opens, set the following items, and then click OK.
Parameters to Adjust
Select Cyan/Magenta/Yellow.
Important
When the Grayscale Printing check box on the Main tab is checked, Cyan/
Magenta/Yellow appear grayed out and are unavailable.
Printer Paper Size
Select the paper size to be used for pattern printing.
Note
Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected.
Amount of Pattern Instances
Select Largest, Large, or Small to set the number of patterns to be printed.
74
Note
Largest and Large cannot be selected when certain paper sizes or output paper sizes are selected.
Color Variation Between Instances
Set the amount of color change between neighboring patterns.
Note
Large is about double the size of Medium, and Small is about half the size of
Medium.
5.
Checking the print results of pattern print
On the Color Adjustment tab, select OK to close the Manual Color Adjustment dialog box.
On the Main tab, select OK, and then execute printing. The machine then prints a pattern in which the color balance that you set is the center value.
Important
Normally, patterns are printed with the color balance settings as the center values. However, when Black Only is selected for Ink Cartridge Settings on the
Maintenance tab, the color balance settings are not applied to pattern printing.
6.
Adjusting the color balance
75
Look at the print results and select the image that you like best. Then enter the color balance numbers indicated at the bottom of that image into the Cyan, Magenta, and
Yellow fields on the Color Adjustment tab.
Clear the Print a pattern for color adjustment check box, and click OK.
Note
You can also set color balance on the Quick Setup tab by choosing Photo
Printing under Commonly Used Settings, and then choosing Color/Intensity
Manual Adjustment under Additional Features.
7.
Complete the setup
Click OK on the Main tab.
Then when you execute printing, the document is printed with the color balance that was adjusted by the pattern print function.
Important
When Print a pattern for color adjustment is selected on the Color Adjustment tab, the following items are grayed out and cannot be set:
•
Preview before printing on the Main tab
•
Stapling Side and Specify Margin... on the Page Setup tab (When Duplex Printing
(Manual) is set, only Stapling Side can be set.)
You can print a pattern only if Normal-size is selected for Page Layout on the Page
Setup tab.
When the Grayscale Printing check box on the Main tab is checked, Cyan, Magenta, and Yellow appear grayed out and are unavailable.
Depending on your application software, this function may not be available.
76
Related Topics
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
77
Adjusting Brightness
You can change the brightness of the overall image data during printing.
This function does not change pure white or pure black but it changes the brightness of the intermediate colors.
The following sample shows the print result when the brightness setting is changed.
Light is selected Normal is selected Dark is selected
The procedure for adjusting brightness is as follows:
You can also set brightness on the Quick Setup tab by choosing Photo Printing under
Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under
Additional Features.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Specify the brightness
78
Select Light, Normal, or Dark for Brightness, and click OK. The current settings are displayed in the settings preview on the left side of the printer driver.
4.
Complete the setup
Click OK on the Main tab.
When you execute print, the data is printed at the specified brightness.
Related Topics
Setting the Print Quality Level (Custom)
79
Adjusting Intensity
You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing.
The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed.
No adjustment Higher intensity
The procedure for adjusting intensity is as follows:
You can also set intensity on the Quick Setup tab by choosing Photo Printing under
Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under
Additional Features.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Adjust intensity
80
Moving the Intensity slider to the right intensifies (darkens) the colors, and moving the slider to the left dilutes (brightens) the colors.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver.
After adjusting each color, click OK.
Important
Adjust the slider gradually.
4.
Complete the setup
Click OK on the Main tab.
When you execute print, the image data is printed with the adjusted intensity.
Related Topics
Setting the Print Quality Level (Custom)
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
81
Adjusting Contrast
You can adjust the image contrast during printing.
To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast.
No adjustment Adjust the contrast
The procedure for adjusting contrast is as follows:
You can also set contrast on the Quick Setup tab by choosing Photo Printing under
Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under
Additional Features.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Adjust the contrast
82
Moving the Contrast slider to the right increases the contrast, and moving the slider to the left decreases the contrast.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The current settings are displayed in the settings preview on the left side of the printer driver.
After adjusting each color, click OK.
Important
Adjust the slider gradually.
4.
Complete the setup
Click OK on the Main tab.
When you execute print, the image is printed with the adjusted contrast.
Related Topics
Setting the Print Quality Level (Custom)
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
83
Adjusting Intensity/Contrast Using Sample Patterns
(Printer Driver)
You can look at the print results of pattern print and adjust the intensity/contrast.
When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values.
Described below is the procedure for adjusting the intensity/contrast while looking at the pattern.
1.
Open the
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3.
Selecting pattern print
On the Color Adjustment tab, select the Print a pattern for color adjustment check box, and click Pattern Print preferences....
84
4.
Setting pattern print
When the Pattern Print dialog box opens, set the following items, and then click OK.
Parameters to Adjust
Select Intensity/Contrast.
Printer Paper Size
Select the paper size to be used for pattern printing.
Note
Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected.
Amount of Pattern Instances
Select Largest, Large, or Small to set the number of patterns to be printed.
Note
Largest and Large cannot be selected when certain paper sizes or output paper sizes are selected.
85
Color Variation Between Instances
Set the amount of color change between neighboring patterns.
Note
Large is about double the size of Medium, and Small is about half the size of
Medium.
5.
Checking the print results of pattern print
On the Color Adjustment tab, select OK to close the Manual Color Adjustment dialog box.
On the Main tab, select OK, and then execute printing. The machine then prints a pattern in which the intensity/contrast that you set is the center value.
6.
Adjusting the intensity/contrast
Look at the print results and select the image that you like best. Then enter the intensity/contrast numbers indicated at the bottom of that image into the Intensity and Contrast fields on the Color Adjustment tab.
Clear the Print a pattern for color adjustment check box, and click OK.
86
Note
You can also set intensity/contrast on the Quick Setup tab by choosing Photo
Printing under Commonly Used Settings, and then choosing Color/Intensity
Manual Adjustment under Additional Features.
7.
Complete the setup
Click OK on the Main tab.
Then when you execute printing, the document is printed with the intensity/contrast that was adjusted by the pattern print function.
Important
When Print a pattern for color adjustment is selected on the Color Adjustment tab, the following items are grayed out and cannot be set:
•
Preview before printing on the Main tab
•
Stapling Side and Specify Margin... on the Page Setup tab (When Duplex Printing
(Manual) is set, only Stapling Side can be set.)
You can print a pattern only if Normal-size is selected for Page Layout on the Page
Setup tab.
Depending on your application software, this function may not be available.
Related Topics
Adjusting Color Balance Using Sample Patterns (Printer Driver)
87
Overview of the Printer Driver
How to Open the Printer Driver Setup Window
Checking the Ink Status from Your Computer
Deleting the Undesired Print Job
Instructions for Use (Printer Driver)
88
Canon IJ Printer Driver
The Canon IJ printer driver (called printer driver below) is a software that is installed on your computer for printing data with this machine.
The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer.
Because different models support different print data formats, you need a printer driver for the specific model you are using.
Printer Driver Types
On Windows Vista SP1 or later, you can install the XPS printer driver in addition to the regular printer driver.
The XPS printer driver is suited to print from an application software that supports XPS printing.
Important
To use the XPS printer driver, the standard printer driver must already be installed on your computer.
Installing the Printer Driver
• To install the regular printer driver, load the Setup CD-ROM that comes with the machine, and then install the driver from Start Setup Again.
• To install the XPS printer driver, load the Setup CD-ROM that comes with the machine, and then select XPS Driver from Add Software.
Specifying the Printer Driver
To specify the printer driver, open the Print dialog box of the application software you are using, and select "XXX Printer" (where "XXX" is your model name) to specify the regular printer driver or select "XXX Printer XPS" (where "XXX" is your model name) to specify the
XPS printer driver.
Displaying the Manual from the Printer Driver
To display a description of a tab in the printer driver setup window, click the Help button found on the tab.
Related Topic
How to Open the Printer Driver Setup Window
89
How to Open the Printer Driver Setup Window
You can display the printer driver setup window from the application software in use or from the printer icon.
Open the Printer Driver Setup Window through the Application Software
Follow the procedure below to configure printing profile when printing.
1.
Select the command that you perform printing on the application software
In general, select Print on the File menu to open the Print dialog box.
2.
Select your model name and click Preferences (or Properties)
The printer driver setup window appears.
Note
Depending on application software you use, command names or menu names may vary and there may be more steps. For details, refer to the user's manual of your application software.
Opening the Printer Driver Setup Window from the Printer Icon
Follow the procedure below to perform machine maintenance operations such as print head cleaning, or to configure a printing profile that is common to all application software.
1.
Select as described below:
• If you are using Windows 8, from the Desktop charms, select Settings -> Control
Panel -> Hardware and Sound -> Devices and Printers.
• If you are using Windows 7, select the Start menu -> Devices and Printers.
• If you are using Windows Vista, select the Start menu -> Control Panel ->
Hardware and Sound -> Printers.
• If you are using Windows XP, select the start menu -> Control Panel -> Printers
and Other Hardware -> Printers and Faxes.
2.
Right-click your model name icon, and then select Printing preferences from the displayed menu
The printer driver setup window appears.
90
Important
Opening the printer driver setup window through Printer properties (Windows
8, Windows 7) or Properties (Windows Vista, Windows XP) displays such tabs regarding the Windows functions as the Ports (or Advanced) tab. Those tabs do not appear when opening through Printing preferences or application software.
For tabs regarding Windows functions, refer to the user's manual for the
Windows.
91
Canon IJ Status Monitor
If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ
XPS Status Monitor" when reading this information.
The Canon IJ Status Monitor is an application software that shows the status of the machine and the progress of printing. You will know the status of the machine with graphics, icons, and messages.
Launching the Canon IJ Status Monitor
The Canon IJ Status Monitor launches automatically when print data is sent to the machine.
When launched, the Canon IJ Status Monitor appears as a button on the task bar.
Click the button of the status monitor displayed on the task bar. The Canon IJ Status
Monitor appears.
Note
To open the Canon IJ Status Monitor when the machine is not printing, open the
and click View Printer Status on the Maintenance tab.
The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your machine.
When Errors Occur
The Canon IJ Status Monitor is automatically displayed if an error occurs (e.g., if the printer runs out of paper or if the ink is low).
92
In such cases, take the appropriate action as described.
93
Checking the Ink Status from Your Computer
If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ
XPS Status Monitor" when reading this information.
You can check the remaining ink level and the FINE cartridge types for your model.
1.
Open the
2.
Launching the Canon IJ Status Monitor
On the Maintenance tab, click View Printer Status.
The Canon IJ Status Monitor opens and displays an image of the ink status.
Note
The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your machine.
When you receive a notice about the remaining ink level, a mark appears above the ink icon.
for example:
The ink is running low. Prepare a new ink cartridge.
3.
If necessary, click Ink Details.
You can check the ink-related information.
If a warning or error related to the remaining ink amount occurs, a notification icon is displayed at the top of the image in the Ink Details dialog box.
In such cases, take the appropriate action as described on the screen.
Note
You can also display the Ink Details dialog box by selecting the ink icon on the
Canon IJ Status Monitor.
94
Canon IJ Preview
The Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed.
The preview reflects the information that is set within the printer driver and allows you to check the document layout, print order, and number of pages. You can also change the media type settings.
When you want to display a preview before printing, open the
, click the Main tab, and check the Preview before printing check box.
When you do not want to display a preview before printing, uncheck the check box.
Important
If you are using the XPS printer driver, see "
Editing the Print Document or Reprinting from the Print History
."
Related Topic
Displaying the Print Results before Printing
95
Deleting the Undesired Print Job
If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ
XPS Status Monitor" when reading this information.
If the printer does not start printing, canceled or failed print job data may be remaining.
Delete the undesired print job by using the Canon IJ Status Monitor.
1.
Display the Canon IJ Status Monitor
Click the button of the status monitor displayed on the task bar.
The Canon IJ Status Monitor appears.
2.
Display the print jobs
Click Display Print Queue.
The print queue window opens.
3.
Delete the print jobs
Select Cancel All Documents from the Printer menu.
When the confirmation message appears, click Yes.
The deletion of the print job is complete.
Important
Users who have not been granted access permission for printer management cannot delete the print job of another user.
Note
When you perform this operation, all print jobs are deleted. If the print queue list contained a necessary print job, start the printing process over from the beginning.
96
Instructions for Use (Printer Driver)
This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver.
Restrictions on the Printer Driver
• With some applications, the Copies setting in the Page Setup tab of the printer driver may not be enabled.
In this case, use the copies setting in the Print dialog box of the application software.
• If the selected Language in the About dialog box of the Maintenance tab does not match the operating system interface language, the printer driver setup window may not be displayed properly.
• Do not change the Advanced tab items of the printer properties. If you change any of the items, you will not be able to use the following functions correctly.
Also, if Print to file is selected in the Print dialog box of the application software and with applications that prohibit EMF spooling, such as Adobe Photoshop LE and MS
Photo Editor, the following functions will not operate.
• Preview before printing on the Main tab
• Prevention of Print Data Loss in the Print Options dialog box on the Page Setup tab
• Page Layout, Tiling/Poster, Booklet, Duplex Printing (Manual), Specify Margin...,
Print from Last Page, Collate, and Stamp/Background... (Stamp...) on the Page
Setup tab
• Print a pattern for color adjustment on the Color Adjustment tab in the Manual
Color Adjustment dialog box
• Since the resolution in the preview display differs from the printing resolution, text and lines in the preview display may appear different from the actual print result.
• With some applications, the printing is divided into multiple print jobs.
To cancel printing, delete all divided print jobs.
• If image data is not printed correctly, display the Print Options dialog box from the
Page Setup tab and change the setting of Disable ICM required from the application
software. This may solve the problem.
97
Note
Disable ICM required from the application software cannot be used when the
XPS printer driver is used.
Points to Note About Applications with Restrictions
• There are following restrictions in Microsoft Word (Microsoft Corporation).
• When Microsoft Word has the same printing functions as the printer driver, use Word to specify them.
• When Fit-to-Page, Scaled, or Page Layout is used for Page Layout on the Page
Setup tab of the printer driver, the document may not print normally in certain versions of Word.
• When Page Size in Word is set to "XXX Enlarge/Reduce", the document may not print normally in certain versions of Word.
If this happens, follow the procedure below.
1. Open Word's Print dialog box.
2. Open the
printer driver setup window , and on the Page Setup tab, set Page Size
to the same paper size that you specified in Word.
3. Set the Page Layout that you want, and then click OK to close the window.
4. Without starting printing, close the Print dialog box.
5. Open Word's Print dialog box again.
6. Open the printer driver setup window and click OK.
7. Start printing.
• If bitmap printing is enabled in Adobe Illustrator (Adobe Systems Incorporated), printing may take time or some data may not be printed. Print after unchecking the Bitmap
Printing check box in the Print dialog box.
98
Printer Driver Description
Canon IJ XPS Preview Description
Canon IJ Status Monitor Description
99
Quick Setup tab Description
The Quick Setup tab is for registering commonly used print settings. When you select a registered setting, the machine automatically switches to the preset items.
Commonly Used Settings
The names and icons of frequently used printing profiles are registered. When you select a printing profile according to the purpose of the document, settings that match the purpose are applied.
In addition, functions that are thought to be useful for the selected printing profile are displayed in Additional Features.
You can also change a printing profile and register it under a new name. You can delete the registered printing profile.
You can rearrange the profiles either by dragging the individual profiles or by holding down the Ctrl key and pressing the up or down arrow keys.
Standard
These are the factory settings.
If Page Size, Orientation, and Copies were set from the application software, those settings have priority.
Photo Printing
If you select this setting when printing a photo, the photo paper and photo size generally used are set.
If Orientation and Copies were set from the application software, those settings have priority.
100
Business Document
Select this setting when printing a general document.
If Page Size, Orientation, and Copies were set from the application software, those settings have priority.
Paper Saving
Select this setting to save paper when printing a general document. The 2-on-1
Printing and Duplex Printing (Manual) check boxes are checked automatically.
If Page Size, Orientation, and Copies were set from the application software, those settings have priority.
Envelope
If you select this setting for printing an envelope, Media Type is set automatically to
Envelope. In the Envelope Size Setting dialog box, select the size of the envelope to be used.
Note
The combination of the Additional Features that was displayed for the printing profile that had been selected when the added printing profile was saved is also displayed when that added printing profile is selected.
Save...
Displays the
Save Commonly Used Settings dialog box .
Click this button when you want to save the information that you set on the Quick Setup,
Main, and Page Setup tabs to Commonly Used Settings.
Save Commonly Used Settings dialog box
This dialog box allows you to save the information that you set on the Quick Setup,
Main, and Page Setup tabs and add the information to the Commonly Used Settings list on the Quick Setup tab.
Name
Enter the name for the printing profile you wish to save.
Up to 255 characters can be entered.
The name appears, with its associated icon, in the Commonly Used Settings list on the Quick Setup tab.
Options...
Opens the
Save Commonly Used Settings dialog box .
Changes the details of printing profile to be saved.
Save Commonly Used Settings dialog box
Select the icons of the printing profiles to be registered to Commonly Used
Settings, and change the items to be saved in the printing profiles.
101
Icon
Select the icon for the printing profile you wish to save.
The selected icon appears, with its name, in the Commonly Used Settings list on the Quick Setup tab.
Save the paper size setting
Saves the paper size to the printing profile in Commonly Used Settings.
To apply the saved paper size when the printing profile is selected, check this check box.
If this check box is unchecked, the paper size is not saved, and consequently the paper size setting is not applied when the printing profile is selected. Instead the printer prints with the paper size specified with the application software.
Save the orientation setting
Saves the Orientation to the printing profile in Commonly Used Settings.
To apply the saved print orientation when the printing profile is selected, check this check box.
If this check box is unchecked, the print orientation is not saved, and consequently the Orientation setting is not applied when the printing profile is selected. Instead the printer prints with the print orientation specified with the application software.
Save the copies setting
Saves the Copies setting to the printing profile in Commonly Used
Settings.
To apply the saved copies setting when the printing profile is selected, check this check box.
If this check box is unchecked, the copies setting is not saved, and consequently the Copies setting is not applied when the printing profile is selected. Instead the printer prints with the copies setting specified with the application software.
Delete
Deletes a registered printing profile.
Select the name of the setting to be deleted from Commonly Used Settings, and click
Delete. When a confirmation message is displayed, click OK to delete the specified printing profile.
Note
Printing profiles that are registered in the initial settings cannot be deleted.
102
Settings Preview
The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
Preview before printing
Shows what the print result will look like before you actually print the data.
Check this check box to display a preview before printing.
Uncheck this check box if you do not want to display a preview.
Important
To use the Canon IJ XPS Preview, you must have Microsoft .NET Framework 4 Client
Profile installed on your computer.
Additional Features
Displays the frequently used, convenient functions for the printing profile that you selected for Commonly Used Settings on the Quick Setup tab.
When you move the mouse pointer near a function that can be changed, a description of that function is displayed.
To enable a function, check the corresponding check box. To disable a function, uncheck the check box.
For some functions, you can set detailed settings from the Main and Page Setup tabs.
2-on-1 Printing
Prints two pages of the document, side by side, on one sheet of paper.
To change the page sequence, click the Page Setup tab, select Page Layout for Page
Layout, and click Specify.... Then in the
Page Layout Printing dialog box that appears,
specify the Page Order.
4-on-1 Printing
Prints four pages of the document, side by side, on one sheet of paper.
To change the page sequence, click the Page Setup tab, select Page Layout for Page
Layout, and click Specify.... Then in the
Page Layout Printing dialog box that appears,
specify the Page Order.
Duplex Printing (Manual)
Select whether to print the document to both sides of the paper manually or to one side of the paper.
To change the staple side or the margins, set the new values from the Page Setup tab.
Grayscale Printing
This function converts the data to monochrome data when printing your document.
103
Draft
This setting is appropriate for test printing.
Rotate 180 degrees
Prints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other application software will be reversed vertically and horizontally.
Color/Intensity Manual Adjustment
Select when you set the Color Correction method and individual settings such as
Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast, etc.
Important
Depending on the printing profiles that were selected in Commonly Used Settings, certain function may be grayed out and you will not be able to change them.
Media Type
Selects a type of printing paper.
Select a media type that matches the paper that is loaded in the printer. This ensures that printing is carried out properly for the specified paper.
Printer Paper Size
Selects the size of paper actually loaded into the machine.
Normally, the paper size is set automatically according to the output paper size setting, and the document is printed with no scaling.
When you set 2-on-1 Printing or 4-on-1 Printing in Additional Features, you can manually set the paper size with Page Size on the Page Setup tab.
If you select a paper size that is smaller than the Page Size, the page image will be reduced.
If you select a paper size that is larger than the Page Size, the page image will be enlarged.
Custom Paper Size dialog box
This dialog box allows you to specify the size (width and height) of the custom paper.
Units
Select the unit for entering a user-defined paper size.
Paper Size
Specifies the Width and the Height of the custom paper. Measurement is shown according to the units specified in Units.
104
Orientation
Selects the printing orientation.
If the application used to create your document has a similar function, select the same orientation that you selected in that application.
Portrait
Prints the document so that its top and bottom positions are unchanged relative to the paper feed direction. This is the default setting.
Landscape
Prints the document by rotating it 90 degrees relative to the paper feed direction.
You can change the rotation direction by going to the Maintenance tab, opening the
Custom Settings dialog box, and then using Rotate 90 degrees left when orientation
is [Landscape] check box.
To rotate the document 90 degrees to the left when printing, select the Rotate 90
degrees left when orientation is [Landscape] check box.
To rotate the document 90 degrees to the right when printing, clear the Rotate 90
degrees left when orientation is [Landscape] check box.
Print Quality
Selects your desired printing quality.
Select one of the following to set the print quality level that is appropriate for the purpose.
To set the print quality level individually, click the Main tab, and for Print Quality, select
Custom. The Set... becomes enabled. Click Set... to open the
specify the desired settings.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality.
Draft
This setting is appropriate for test printing.
Paper Source
Shows the source from which paper is supplied.
Copies
Specifies the number of copies you want to print. You can specify a value from 1 to 999.
105
Important
When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software.
Always Print with Current Settings
Prints documents with the current settings starting from the next print execution.
When you select this function and then close the
printer driver setup window , the
information that you set on the Quick Setup, Main, and Page Setup tabs are saved and printing with the same settings is possible starting from the next print execution.
Important
If you log on with a different user name, the settings that were set when this function was enabled are not reflected in the print settings.
If a setting was specified on the application software, it has priority.
Defaults
Restores all the settings you have changed to their default values.
Click this button to return all settings on the Quick Setup, Main, and Page Setup tabs to their default values (factory settings).
Related Topics
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order
Displaying the Print Results before Printing
Setting Paper Dimensions (Custom Size)
Printing a Color Document in Monochrome
Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
Registering a Frequently Used Printing Profile
106
Main tab Description
The Main tab allows you to create a basic print setup in accordance with the media type.
Unless special printing is required, normal printing can be performed just by setting the items on this tab.
Settings Preview
The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
Media Type
Selects a type of printing paper.
Select a media type that matches the paper that is loaded in the machine. This ensures that printing is carried out properly for the specified paper.
Paper Source
Shows the source from which paper is supplied.
Print Quality
Selects your desired printing quality.
Select one of the following to set the print quality level that is appropriate for the purpose.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality.
107
Draft
This setting is appropriate for test printing.
Custom
Select this when you want to set the printing quality level individually.
Set... is enabled and you can open the
Custom dialog box to specify custom settings.
Set...
Open the Custom dialog box. You can then individually set the print quality level.
Select Custom for Print Quality to enable this button.
Custom dialog box
Set the quality level, and select the desired print quality.
Quality
You can use the slider bar to adjust the print quality level.
Important
Certain print quality levels cannot be selected depending on the settings of
Media Type.
Note
The High, Standard, or Draft print quality modes are linked with the slider bar. Therefore when the slider bar is moved, the corresponding quality and value are displayed on the left. This is the same as when the corresponding radio button is selected for Print Quality on the Main tab.
Color/Intensity
Selects color adjustment method.
Auto
Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast, and so on are adjusted automatically.
Manual
Select when you set the Color Correction method and individual settings such as
Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast, etc.
Set... is enabled and you can open the
of the
Manual Color Adjustment dialog box to specify the desired settings.
Set...
In the Manual Color Adjustment dialog box, you can adjust individual color settings such as Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast on the Color
Adjustment tab, and select the Color Correction method on the Matching tab.
108
Note
If you want to use an ICC profile to adjust colors, use the Manual Color
Adjustment dialog box to set the profile.
Color Adjustment Tab
This tab allows you to adjust the color balance by changing the settings of the Cyan,
Magenta, Yellow, Brightness, Intensity, and Contrast options.
Preview
Shows the effect of color adjustment.
The color and brightness change when each item is adjusted. You can check the color adjustment status easily by changing the preview image to one similar to the results to be printed with Sample Type.
Sample Type
Selects a preview image displayed on the Color Adjustment tab.
If necessary, select a preview image from Standard, Portrait, Landscape, or Graphics, whichever is most similar to the print results.
View Color Pattern
Displays a pattern for checking color changes produced by color adjustment.
If you want to display the preview image with a color pattern, check this check box.
If you want to display the preview image with a sample type, uncheck this check box.
Note
The graphic is in monochrome when the Grayscale Printing check box is checked.
Cyan / Magenta / Yellow
Adjusts the strengths of Cyan, Magenta, and Yellow.
Moving the slider to the right makes a color stronger, and moving the slider to the left makes a color weaker.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
This adjustment changes the relative amount of ink of each color used, which alters the total color balance of the document. Use your application if you want to change the total color balance significantly. Use the printer driver only if you want to adjust the color balance slightly.
109
Brightness
Selects the brightness of your print.
You cannot change the levels of pure white and black. However, the brightness of the colors between white and black can be changed.
Intensity
Adjusts the overall intensity of your print.
Moving the slider to the right increases the intensity, and moving the slider to the left decreases the intensity.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Contrast
Adjusts the contrast between light and dark in the image to be printed.
Moving the slider to the right increases the contrast, moving the slider to the left decreases the contrast.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Important
When Grayscale Printing is checked on the Main tab, Cyan, Magenta, and
Yellow appear grayed out and are unavailable.
Print a pattern for color adjustment
When the color balance or intensity/contrast is changed, the pattern printing function prints a list of the adjustment results along with the adjustment values.
Select this function when printing a pattern for color adjustment. The Pattern
Print preferences... becomes enabled, the
Pattern Print dialog box opens, and
a pattern can be set.
Pattern Print preferences...
The Pattern Print dialog box opens and allows you to set adjustment items and pattern printing settings such as number of patterns.
Pattern Print dialog box
Performs the setup for printing of patterns that allow you to check the color balance and intensity/contrast of documents.
Parameters to Adjust
Select the item to be checked by pattern printing.
Cyan/Magenta/Yellow
Prints a pattern that allows you to check the cyan/magenta/yellow balance.
110
Intensity/Contrast
Prints a pattern that allows you to check the intensity/contrast balance.
Important
When Grayscale Printing is checked on the Main tab, Cyan/
Magenta/Yellow appear grayed out and are unavailable.
Printer Paper Size
Selects the paper size to be used for pattern printing.
This setting is linked to Printer Paper Size on the Page Setup tab.
Note
Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected.
Amount of Pattern Instances
Sets the number of patterns to be printed.
You can select from Largest, Large, and Small. When you select a pattern size, the number of patterns that can be printed is as follows:
Largest
Cyan/Magenta/Yellow 37
Intensity/Contrast 49
Large
Cyan/Magenta/Yellow 19
Intensity/Contrast 25
Small
Cyan/Magenta/Yellow 7
Intensity/Contrast 9
Note
Largest and Large cannot be selected when certain paper sizes or output paper sizes are selected.
The setting preview on the Main tab displays an image that allows you to check the overall layout.
Color Variation Between Instances
Sets the amount of color change between neighboring patterns.
Select from Large, Medium, and Small. Large produces a large amount of change, and Small produces a small amount of change.
111
Note
Large is about double the size of Medium, and Small is about half the size of Medium.
Matching Tab
Allows you to select the method for adjusting colors to match the type of document to be printed.
Color Correction
Allows you to select Driver Matching, ICM (ICC Profile Matching), or None to match the purpose of the print operation.
Driver Matching
With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer.
ICM (ICC Profile Matching)
Adjusts the colors by using an ICC profile when printing.
Specify the input profile to be used.
None
Disables color adjustment with the printer driver.
Note
In the XPS printer driver, ICM has become ICC Profile Matching.
Input Profile
Specifies the input profile to be used when you select ICM (ICC Profile
Matching) for Color Correction.
Standard
The standard printer profile (sRGB), which supports the color space of ICM, is used. This is the default setting.
Adobe RGB (1998)
The Adobe RGB profile, which supports a wider color space than sRGB, is used.
Important
Adobe RGB (1998) is not displayed when input profiles of Adobe RGB are not installed.
112
Note
In the XPS printer driver, ICM has become ICC Profile Matching.
Important
If the application software is set so that ICM is disabled, ICM is unavailable for
Color Correction and the printer may not be able to print the image data properly.
When Grayscale Printing is checked on the Main tab, Color Correction appears grayed out and is unavailable.
Grayscale Printing
This function converts the data to monochrome data when printing your document.
Check this check box to print a color document in monochrome.
Uncheck this check box to print a color document in color.
Important
Depending on the Media Type settings, the same print results may be produced even if the Print Quality is changed.
Preview before printing
Shows what the print result will look like before you actually print the data.
Check this check box to display a preview before printing.
Uncheck this check box if you do not want to display a preview.
Important
To use the Canon IJ XPS Preview, you must have Microsoft .NET Framework 4 Client
Profile installed on your computer.
Defaults
Restores all the settings you have changed to their default values.
Clicking this button restores all the settings on the current screen to their default values
(factory settings).
Features
Setting the Print Quality Level (Custom)
Adjusting Color Balance Using Sample Patterns (Printer Driver)
113
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
Adjusting Colors with the Printer Driver
Printing a Color Document in Monochrome
Displaying the Print Results before Printing
114
Page Setup tab Description
The Page Setup tab allows you to determine how a document is to be arranged on the paper. Also, this tab allows you to set the number of copies and the order of printing. If the application which created the document has a similar function, set them with the application.
Settings Preview
The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
Page Size
Selects a page size.
Ensure that you select the same page size as you selected within the application.
Custom Paper Size dialog box
This dialog box allows you to specify the size (width and height) of the custom paper.
Units
Select the unit for entering a user-defined paper size.
Paper Size
Specifies the Width and the Height of the custom paper. Measurement is shown according to the units specified in Units.
115
Orientation
Selects the printing orientation.
If the application used to create your document has a similar function, select the same orientation that you selected in that application.
Portrait
Prints the document so that its top and bottom positions are unchanged relative to the paper feed direction. This is the default setting.
Landscape
Prints the document by rotating it 90 degrees relative to the paper feed direction.
You can change the rotation direction by going to the Maintenance tab, opening the
Custom Settings dialog box, and then using Rotate 90 degrees left when orientation
is [Landscape] check box.
To rotate the document 90 degrees to the left when printing, select the Rotate 90
degrees left when orientation is [Landscape] check box.
To rotate the document 90 degrees to the right when printing, clear the Rotate 90
degrees left when orientation is [Landscape] check box.
Rotate 180 degrees
Prints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other application software will be reversed vertically and horizontally.
Printer Paper Size
Selects the size of paper actually loaded into the machine.
The default setting is Same as Page Size to perform normal-sized printing.
You can select a printer paper size when you select Fit-to-Page, Scaled, Page Layout,
Tiling/Poster, or Booklet for Page Layout.
If you select a paper size that is smaller than the Page Size, the document size will be reduced. If you select a paper size that is larger than the Page Size, the document size will be enlarged.
Page Layout
Selects the size of the document you want to print and the type of printing.
Normal-size
This is the normal printing method. Select this when you do not specify any page layout.
Automatically reduce large document that the printer cannot output
If the printer cannot print the paper size of a document, the machine can automatically reduce the size when it prints the document.
116
Check this check box to reduce the size when printing the document.
Uncheck this check box to print the document with the original document size.
Fit-to-Page
This function enables you to automatically enlarge or reduce documents to fit to the paper size loaded in the printer without changing the paper size you specified in your application software.
Scaled
Documents can be enlarged or reduced to be printed.
Specify the size in Printer Paper Size, or enter the scaling ratio in the Scaling box.
Scaling
Specifies an enlargement or reduction ratio for the document you want to print.
Page Layout
Multiple pages of document can be printed on one sheet of paper.
Click Specify... to display the
Page Layout Printing dialog box and specify how to
allocate pages.
Specify...
Opens the Page Layout Printing dialog box.
Click this button to set details on page layout printing.
Page Layout Printing dialog box
This dialog box allows you to select the number of document pages to be placed on one sheet of paper, the page order, and whether a page border line is to be printed around each document page.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.
Preview Icon
Shows the settings made on the Page Layout Printing dialog box.
You can check what the print result will look like before you actually print the data.
Pages
Specifies the number of document pages to fit on one sheet.
Page Order
Specifies the document orientation to be printed on a sheet of paper.
117
Page Border
Prints a page border line around each document page.
Check this check box to print the page border line.
Uncheck this check box if you do not want to print the line.
Tiling/Poster
This function enables you to enlarge the image data and divide the enlarged data into several pages to be printed. You can also glue together these sheets of paper to create large printed matter, such as a poster.
Click Specify... to display the
Tiling/Poster Printing dialog box and specify the number
of pages that you want to divide the image data into.
Specify...
Opens the Tiling/Poster Printing dialog box.
Click this button to set details on tiling/poster printing.
Tiling/Poster Printing dialog box
This dialog box allows you to select the size of the image to be printed. You can also make settings for cut lines and paste markers which are convenient for pasting together the pages into a poster.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.
Preview Icon
Shows the settings of the Tiling/Poster Printing dialog box.
You can check what the print result will look like.
Image Divisions
Select the number of divisions (vertical x horizontal).
As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allow you to create a larger poster.
Print "Cut/Paste" in margins
Specifies whether to print the words "Cut" and "Paste" in the margins. These words serve as guidelines for pasting together the pages into a poster.
Check this check box to print the words.
Uncheck this check box if you do not want to print the words.
Note
Depending on the type of printer driver you are using and the environment, this function may not be available.
118
Print "Cut/Paste" lines in margins
Specifies whether to print cut lines that serve as guidelines for pasting together the pages into a poster.
Check this check box to print the cut lines.
Uncheck this check box if you do not want to print the lines.
Print page range
Specifies the printing range. Select All under normal circumstances.
Select Pages to specify a specific page or range.
Note
If some of the pages have not been printed well, specify the pages that do not need to be printed by clicking them in the settings preview of the Page
Setup tab. Only the pages shown on the screen will be printed this time.
You can also select Pages in the Print page range and enter the print page range.
Booklet
Booklet printing is the convenient function to create a booklet. Data is printed on both sides of a sheet of paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center.
Click Specify... to display the
Booklet Printing dialog box and specify how to fold.
Specify...
Opens the Booklet Printing dialog box.
Click this button to set details on booklet printing.
Booklet Printing dialog box
This dialog box allows you to set how to bind the document as a booklet.
Printing only on one side and printing a page border, can also be set in this dialog box.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.
Preview Icon
Shows the settings made on the Booklet Printing dialog box.
You can check what the document will look like when printed as a booklet.
Margin for stapling
Specifies which side of the booklet is to be stapled.
119
Insert blank page
Selects whether to print the document on one side or both sides of the booklet.
Check this check box to print the document on one side of the booklet and select the side to be left blank from the list.
Uncheck this check box to print the document on both sides of the booklet.
Margin
Specifies the width of the stapling margin.
The specified width becomes the stapling margin from the center of the sheet.
Page Border
Prints a page border line around each document page.
Check this check box to print the page border line.
Uncheck this check box if you do not want to print the line.
Duplex Printing (Manual)
Select whether to print the document to both sides of the paper manually or to one side of the paper.
Check this check box to print the document on both sides.
Uncheck this check box to print the document on one side only.
This function can be used only when Plain Paper is selected for Media Type and one of
Normal-size, Fit-to-Page, Scaled, or Page Layout is selected.
Stapling Side
Selects the stapling margin position.
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best stapling margin position. Check Stapling Side, and select from the list to change it.
You can specify the stapling margin width in the
Specify Margin dialog box that is opened
by clicking Specify Margin....
Specify Margin...
Opens the Specify Margin dialog box.
You can specify the width of the margin.
Specify Margin dialog box
This dialog box allows you to specify the margin width for the side to be stapled. If a document does not fit on one page, the document is reduced when printed.
Margin
Specifies the width of the stapling margin.
The width of the side specified by Stapling Side becomes the stapling margin.
120
Copies
Specifies the number of copies you want to print. You can specify a value from 1 to 999.
Important
If the application used to create your document has a similar function, specify the number of copies with the application without specifying it here.
Print from Last Page/Collate
Specifies the order in which to print document pages.
Print from Last Page
Check this check box when you want to print from the last page in order. If you do this, you do not need to sort the pages into their correct order after printing.
Uncheck this check box to print your document in normal order, starting from the first page.
Collate
Check this check box to group together the pages of each copy when you want to print multiple copies.
Uncheck this check box when you want to print with all pages of the same page number grouped together.
Important
When the application software that you used to create the document has the same function, give priority to the printer driver settings. However, if the print results are not acceptable, specify the function settings on the application software. When you specify the number of copies and the printing order with both the application and this printer driver, the number of copies may be multiplied numbers of the two settings or the specified printing order may not be enabled.
Print Options...
Opens the
Changes detailed print driver settings for print data that is sent from applications.
Print Options dialog box
Makes changes to print data that is sent to the printer.
Depending on the type of printer driver you are using and the environment, this function may not be available.
Disable ICM required from the application software
Disables the ICM function required from the application software.
When an application software uses Windows ICM to print data, unexpected colors
121
may be produced or the printing speed may decrease. If these problems occur, checking this check box may resolve the problems.
Important
Uncheck this check box under normal circumstances.
This function does not work when ICM is selected for Color Correction on the
Matching tab of the Manual Color Adjustment dialog box.
Note
Disable ICM required from the application software tab cannot be used with the XPS printer driver.
Disable the color profile setting of the application software
Checking this check box disables information in the color profile that was set on the application software.
When the information in the color profile set on the application software is output to the printer driver, the print result may contain unexpected colors. If this happens, checking this check box may resolve the problem.
Important
Even when this check box is checked, only some of the information in the color profile is disabled, and the color profile can still be used for printing.
Uncheck this check box under normal circumstances.
Ungroup Papers
Sets the display method of Media Type, Page Size, and Printer Paper Size.
To display the items separately, select the check box.
To display the items as a group, clear the check box.
Do not allow application software to compress print data
Compression of the application software print data is prohibited.
If the print result has missing image data or unintended colors, selecting this check box may improve the condition.
Important
Uncheck this check box under normal circumstances.
Note
Do not allow application software to compress print data tab cannot be used with the XPS printer driver.
122
Print after creating print data by page
The print data is created in page units, and printing starts after the processing of one page of print data is complete.
If a printed document contains unintended results such as streaks, selecting this check box may improve the results.
Important
Uncheck this check box under normal circumstances.
Scale images using nearest-neighbor interpolation
When an image is to be enlarged or reduced when printed, the printer uses a simple interpolation process to enlarge or reduce the image.
If the image data in a printed document is not printed clearly, selecting this check box may improve the results.
Important
Uncheck this check box under normal circumstances.
Note
Scale images using nearest-neighbor interpolation can be used only with the XPS printer driver.
Prevention of Print Data Loss
You can reduce the size of the print data that was created with the application software and then print the data.
Depending on the application software being used, the image data may be cut off or may not be printed properly. In such cases, select On. If you will not be using this function, select Off.
Important
When using this function, the print quality may drop depending on the print data.
Unit of Print Data Processing
Selects the processing unit of the print data to be sent to the machine.
Select Recommended under normal circumstances.
Important
A large amount of memory may be used for certain settings.
Do not change the setting if your computer has a small amount of memory.
123
Note
Unit of Print Data Processing tab cannot be used with the XPS printer driver.
Stamp/Background... (Stamp...)
Opens the
Stamp/Background (Stamp) dialog box .
The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name. The Background function allows you to print a light illustration behind the document data.
Note
With the XPS printer driver, the Stamp/Background... button has become the
Stamp... button and only the stamp function can be used.
Depending on the type of printer driver you are using and the environment, Stamp and
Background may not be available.
Stamp/Background (Stamp...) dialog box
The Stamp/Background (Stamp...) dialog box allows you to print a stamp and/or background over or behind the document pages. In addition to the pre-registered ones, you can register and use your original stamp or background.
Note
With the XPS printer driver, the Stamp/Background... button has become the
Stamp... button and only the stamp function can be used.
Stamp
Stamp printing is a function that prints a stamp over a document.
Check this check box and select a title from the list to print a stamp.
Click Define Stamp... to open the Stamp Settings dialog box, and then you can configure the details of the stamp.
Uncheck this check box if you do not want to print a stamp.
Define Stamp...
Opens the Stamp Settings dialog box.
You can check the details of a selected stamp or save a new stamp.
Stamp Tab
The Stamp tab allows you to set the text and bitmap file (.bmp) to be used for a stamp.
Preview Window
Shows the status of the stamp configured in each tab.
124
Stamp Type
Specifies the stamp type.
Select Text to create a stamp with characters. Select Bitmap to create with a bitmap file. Select Date/Time/User Name to display the creation date/time and user name of the printed document.
The setting items in the Stamp tab change depending on the selected type.
When Stamp Type is Text or Date/Time/User Name
Stamp Text
Specifies the stamp text string.
Up to 64 characters can be entered.
For Date/Time/User Name, the creation date/time and user name of the printed object are displayed in Stamp Text.
Important
Stamp Text appears grayed out and is unavailable if Date/Time/User
Name is selected.
TrueType Font
Selects the font for the stamp text string.
Style
Selects the font style for the stamp text string.
Size
Selects the font size for the stamp text string.
Outline
Selects a frame that encloses the stamp text string.
If a large font size is selected for Size, characters may extend outside of the stamp border.
Color/Select Color...
Shows the current color for the stamp.
To select a different color, click Select Color... to open the Color dialog box, and select or create a color you wish to use as a stamp.
When Stamp Type is Bitmap
File
Specifies the name of the bitmap file to be used as the stamp.
125
Select File...
Opens the dialog box to open a file.
Click this button to select a bitmap file to be used as a stamp.
Size
Adjusts the size of the bitmap file to be used as a stamp.
Moving the slider to the right increases the size, moving the slider to the left decreases the size.
Transparent white area
Specifies whether to make white-filled areas of the bitmap transparent.
Check this check box to make white-filled areas of the bitmap transparent.
Uncheck this check box if you do not want to make white-filled areas of the bitmap transparent.
Note
Click Defaults to set Stamp Type to text, Stamp Text to blank, TrueType
Font to Arial, Style to Regular, Size to 36 points, Outline unchecked, and
Color to gray with the RGB values (192, 192, 192).
Placement Tab
The Placement tab allows you to set the position where the stamp is to be printed.
Preview Window
Shows the status of the stamp configured in each tab.
Position
Specifies the stamp position on the page.
Selecting Custom from the list allows you to enter values for the X-Position and Y-Position coordinates directly.
Orientation
Specifies the angle of rotation for the stamp. The angle can be set by entering the number of degrees.
Negative values rotate the stamp clockwise.
Note
Orientation is enabled only when Text or Date/Time/User Name is selected for Stamp Type on the Stamp tab.
Note
Click Defaults to set the stamp position to Center and the orientation to 0.
126
Save settings Tab
The Save settings tab allows you to register a new stamp or delete an unnecessary stamp.
Title
Enter the title to save the stamp you created.
Up to 64 characters can be entered.
Note
Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
Stamps
Shows a list of saved stamp titles.
Specify a title to display the corresponding stamp in Title.
Save/Save overwrite
Saves the stamp.
Enter a title in Title, and then click this button.
Delete
Deletes an unnecessary stamp.
Specify the title of an unnecessary stamp from the Stamps list, and click this button.
Place stamp over text
Sets how the stamp is to be printed over the document.
Check the Stamp check box to enable this.
Check this check box to print a stamp over the printed document page. The printed data may be hidden behind the stamp.
Uncheck this check box to print the document data over the stamp. The printed data will not be hidden behind the stamp.
Note
The stamp is given priority because the stamp is printed over the document data in the sections where the stamp and the document data overlap. When this check box is unchecked, the stamp is printed behind the document data and may be hidden in the overlapping sections depending on the application software used.
Print semitransparent stamp
Sets how the stamp is to be printed over the document.
Check the Stamp check box to enable this.
127
Check this check box to print a semi-transparent stamp over the printed document page.
Uncheck this check box to print the stamp over the document data. The printed data may be hidden behind the stamp.
Note
You can use Print semitransparent stamp only with the XPS printer driver.
Stamp first page only
Selects whether the stamp is to be printed on the first page only or on all pages when the document has two or more pages.
Check the Stamp check box to enable this.
Check this check box to print a stamp on the first page only.
Uncheck this check box to print a stamp on all pages.
Background
Background printing is a function that allows you to print an illustration or a similar object (bitmap, etc.) behind the document.
Check this check box to print a background and select a title from the list.
Click Select Background... to open the Background Settings dialog box, and then you can configure the details of the background.
Uncheck this check box if you do not want to print a background.
Select Background...
Opens the Background Settings dialog box.
You can register a bitmap as a background, and change layout method and intensity of the selected background.
Background Tab
The Background tab allows you to select a bitmap file (.bmp) to be used as a background or determine how to print the selected background.
Preview Window
Shows the status of the bitmap set on the Background tab.
File
Specifies the name of the bitmap file to be used as the background.
Select File...
Opens the dialog box to open a file.
Click this button to select a bitmap file (.bmp) to be used as the background.
128
Layout Method
Specifies how the background image is to be placed on the paper.
When Custom is selected, you can set coordinates for X-Position and Y-
Position.
Intensity
Adjusts the intensity of the bitmap to be used as a background.
Moving the slider to the right increases the intensity, and moving the slider to the left decreases the intensity. To print the background at the original bitmap intensity, move the slider to the rightmost position.
Note
Depending on the type of printer driver you are using and the environment, this function may not be available.
Click Defaults to set File to blank, Layout Method to Fill page, and the
Intensity slider to the middle.
Save settings Tab
The Save settings tab allows you to register a new background or delete an unnecessary background.
Title
Enter the title to save the background image you specified.
Up to 64 characters can be entered.
Note
Spaces, tabs, and returns cannot be entered at the beginning or end of a title.
Backgrounds
Shows a list of registered background titles.
Specify a title to display the corresponding background in Title.
Save/Save overwrite
Saves the image data as a background.
After inserting the Title, click this button.
Delete
Deletes an unnecessary background.
Specify the title of an unnecessary background from the Backgrounds list, and then click this button.
129
Background first page only
Selects whether to print the background on the first page only or print on all pages when the document has two or more pages.
Check the Background check box to enable this.
Check this check box to print a background on the first page only.
Uncheck this check box to print a background on all pages.
130
Maintenance tab Description
The Maintenance tab allows you to perform machine maintenance or change the settings of the machine.
Cleaning
Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels are sufficiently high.
Deep Cleaning
Performs deep cleaning.
Perform deep cleaning when two cleaning attempts do not resolve the print head problem.
Note
Deep Cleaning consumes a larger amount of ink than Cleaning.
Cleaning the print heads frequently will rapidly deplete your printer's ink supply.
Therefore, perform cleaning only when necessary.
Ink Group
When you click Cleaning or Deep Cleaning, the Ink Group window is displayed.
131
Selects the ink group that you want to clean the print head for.
Click Initial Check Items to display the items that you need to check before you execute cleaning or deep cleaning.
Initial Check Items
Check that the machine power is on, and open the cover of the machine.
Check the following items for each ink. Then, if necessary, perform Nozzle Check or Cleaning.
•
Check the amount of ink remaining in the cartridge.
• Make sure that you push in the ink cartridge completely until you hear a clicking sound.
• If an orange tape is adhered to the ink cartridge, peel it off completely.
Any remaining tape will hinder ink output.
• Check that the ink cartridges are installed in their correct positions.
Print Head Alignment
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.
Align the print head immediately after installing the print head.
Start Print Head Alignment dialog box
When you click Print Head Alignment, the Start Print Head Alignment dialog box is displayed.
This dialog box allows you to adjust the attachment position for the print head, or to print the current setting value for the print head position.
Align Print Head
Aligns the print head.
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.
Align the print head immediately after installing the print head.
Print Alignment Value
Click this button to check the current setting value of the print head position.
Prints the current setting value for the print head position.
Print Head Alignment dialog box
To adjust the print head position manually, click Align Print Head in the Start Print
Head Alignment dialog box, and perform the operations instructed in the
132
messages. The Print Head Alignment dialog box is then displayed.
This dialog box allows you to check the printed pattern and adjust the print head position.
Preview Window
Displays the pattern of Print Head Alignment, and checks the position of the selected pattern.
You can also change the setting by clicking the pattern on the screen directly.
Select the Pattern Number
Compare the printed adjustment patterns, and enter the pattern number of the pattern with the least visible streaks or horizontal stripes into the corresponding box.
Note
If you do not know how to analyze the printed pattern, see Aligning the Print
Head Position from Your Computer.
Nozzle Check
Prints a nozzle check pattern.
Perform this function if printing becomes faint or a specific color fails to print. Print a nozzle check pattern, and check whether the print head is working properly. If the print result for a specific color is fainted, or if there are any unprinted sections, click Cleaning to clean the print head.
To display a list of items that you should check before printing the nozzle check pattern, click Initial Check Items.
Print Check Pattern
This function prints a pattern that allows you to check whether the any of the ink nozzles are clogged.
Click Print Check Pattern. When the confirmation message is displayed, click OK. The
Pattern Check dialog box is then displayed.
left-side bitmap(good)
The print head nozzles are not clogged.
right-side bitmap(bad)
The print head nozzles may be clogged.
Exit
Closes the Pattern Check dialog box, and returns to the Maintenance tab.
133
Cleaning
Performs print head cleaning.
Print head cleaning removes any blockage in the print head nozzles.
Perform cleaning when printing becomes faint, or if a specific color fails to print, even though all ink levels are sufficiently high.
Initial Check Items
Check that the machine power is on, and open the cover of the machine.
Check the following items for each ink. Then, if necessary, perform Nozzle Check or
Cleaning.
•
Check the amount of ink remaining in the cartridge.
• Make sure that you push in the ink cartridge completely until you hear a clicking sound.
• If an orange tape is adhered to the ink cartridge, peel it off completely.
Any remaining tape will hinder ink output.
• Check that the ink cartridges are installed in their correct positions.
Ink Cartridge Settings
Opens the
Ink Cartridge Settings dialog box .
Use this function to specify the FINE cartridge you want to use.
Ink Cartridge Settings dialog box
When you click Ink Cartridge Settings, the Ink Cartridge Settings dialog box is displayed.
This feature enables you to specify the most appropriate FINE cartridge among installed cartridges according to an intended use.
When one of the FINE cartridges becomes empty and cannot be replaced immediately by a new one, you can specify the other FINE cartridge that still has ink and continue printing.
Ink Cartridge
Selects the FINE cartridge you use for printing.
Color Only
Uses the color FINE cartridge only.
Black Only
Uses the black FINE cartridge only.
134
Both Black and Color
Uses the FINE cartridges installed on the machine, which are color and black.
Important
When a setting other than Plain Paper or Envelope is selected for Media
Type on the Main tab, Black Only is disabled because the machine uses the color FINE cartridge to print documents.
Do not detach the FINE cartridge that is not in use. Printing cannot be performed while either FINE cartridge is detached.
Bottom Plate Cleaning
Performs cleaning of the bottom plate of the machine.
To prevent smudges on the back side of a sheet of paper, perform Bottom Plate Cleaning before you perform duplex printing.
Also perform Bottom Plate Cleaning if ink smudges caused by something other than print data appear on the printed page.
Roller Cleaning
Cleans the paper feed rollers.
Paper feeding may fail if paper dust has stuck to the printer's paper feed rollers. In this case, clean the paper feed rollers to improve the print result.
Power Off
Turns off the printer from the machine driver.
Perform this function to turn off the machine when you cannot press the ON button
(POWER button) on the printer because the machine is out of your reach.
You must press the ON button (POWER button) on the printer to turn the machine on again after clicking this button. When you use this function, you will not be able to turn the printer on from the printer driver.
Auto Power
Opens the
Auto Power Settings dialog box .
Specify settings for operating the machine power automatically. Perform this function if you want to change the auto power settings.
135
Note
If the machine is off or if communication between the machine and the computer is disabled, an error message may appear because the computer cannot collect the machine status.
If this happens, click OK to display the most recent settings specified on your computer.
Auto Power Settings dialog box
When you click Auto Power, the Auto Power Settings dialog box is displayed.
This dialog box allows you to manage the machine power from the printer driver.
Auto Power On
Selects the auto power-on setting.
Specify Disable to prevent the machine from turning on automatically when print data is sent to it.
Make sure the printer is on and then click OK to change the machine settings.
Specify Enable to turn the machine on automatically when print data is sent to it.
Auto Power Off
Selects the auto power-off setting.
If a printer driver operation or a machine operation is not performed within the specified time, the machine turns off.
Quiet Settings
Opens the
Quiet Settings dialog box allows you to specify a setting that reduces the operating noise of the machine. This mode comes in handy when the operating noise of the machine becomes a concern, such when printing at night. Perform this operation when you want to change the quiet mode setting.
Quiet Settings dialog box
When you click Quiet Settings, the Quiet Settings dialog box is displayed.
Quiet Settings dialog box allows you to specify a setting that reduces the operating noise of the machine.
Select when you wish to reduce the operating noise of the machine at night, etc.
Using this function may lower the print speed.
Do not use quiet mode
Select this option when you wish to use the machine with volume of normal operating noise.
Always use quiet mode
Select this option when you wish to reduce the operating noise of the machine.
136
Use quiet mode during specified hours
Select this option when you wish to reduce the operating noise of the machine during a specified period of time.
Set the Start time and the End time of the quiet mode you wish to be activated. If both are set to the same time, the quiet mode will not function.
Important
You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver).
No matter how you use to set the quiet mode, the mode is applied when you perform operations from the operation panel of the machine or printing and scanning from the computer.
If you specify a time for Use quiet mode during specified hours, quiet mode is not applied to operations (copy, direct print, etc.) performed directly from the machine.
Custom Settings
Opens the
Perform this function to change the settings of this printer.
Note
If the printer is off or bi-directional communication is disabled, a message may appear because the computer cannot collect the printer status.
If this happens, click OK to display the most recent settings specified on your computer.
Custom Settings dialog box
When you click Custom Settings, the Custom Settings dialog box is displayed.
If necessary, switch between various modes of machine operation.
Align heads manually
Usually, the Print Head Alignment function on the Maintenance tab is set to automatic head alignment, but you can change it to manual head alignment.
If the printing results are unsatisfactory even after you execute automatic head alignment, execute manual head alignment.
Check this check box to perform the manual head alignment.
Uncheck this check box to perform the automatic head alignment.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation.
137
To rotate the document 90 degrees to the left when printing, select the check box.
To rotate the document 90 degrees to the right when printing, clear the check box.
Ink Drying Wait Time
The machine can pause before printing a subsequent page. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
View Print History
This function starts the Canon IJ XPS preview, and displays the print history.
Note
You can use this function only with the XPS printer driver.
View Printer Status
Starts the Canon IJ Status Monitor.
Perform this function when you want to check the printer status and how a print job is proceeding.
Note
If you are using the XPS printer driver, the "Canon IJ Status Monitor" becomes the
"Canon IJ XPS Status Monitor".
About
Opens the
The version of the printer driver, plus a copyright notice, can be checked.
In addition, the language to be used can be switched.
About dialog box
When you click About, the About dialog box is displayed.
This dialog box displays the version, copyright, and module list of the printer driver. You can select the language to be used and switch the language displayed in the setup window.
Modules
Lists the printer driver modules.
Language
Specifies the language you wish to use in the
138
Important
If the font for displaying the language of your choice is not installed in your system, the characters will be garbled.
Features
Cleaning the Print Heads from Your Computer
Aligning the Print Head Position from Your Computer
Use Your Computer to Print a Nozzle Check Pattern
Setting the Ink Cartridge to be Used
Cleaning Inside the Machine
Cleaning the Paper Feed Rollers from Your Computer
Managing the Machine Power
Related Features
Reducing the Machine Noise
Changing the Machine Operation Mode
139
Canon IJ Preview Description
Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed.
The preview reflects the information that is set within the printer driver and allows you to check the document layout, print order, and number of pages. You can also change the media type.
When you want to display a preview before printing, open the
, and check the Preview before printing check box on the Main tab.
If you do not want to display a preview before printing, uncheck the check box.
File Menu
Selects the print operation.
Start Printing
Ends the Canon IJ Preview and then starts printing the document that is displayed on the preview screen.
This command has the same function as the Start Printing on the toolbar.
Cancel Printing
Ends the Canon IJ Preview and cancels the printing of the document that is displayed on the preview screen.
This command has the same function as the Cancel Printing on the toolbar.
Exit
Ends the Canon IJ Preview.
140
Page Menu
This menu includes the following commands to select page to be displayed.
All of these commands except Select Page can also be selected from the toolbar.
First Page
Displays the first page of the document.
If the currently displayed page is the first page, this command is grayed out and cannot be selected.
Previous Page
Displays the page located before the currently displayed page.
If the currently displayed page is the first page, this command is grayed out and cannot be selected.
Next Page
Displays the page located after the currently displayed page.
If the currently displayed page is the last page, this command is grayed out and cannot be selected.
Last Page
Displays the last page of the document.
If the currently displayed page is the last page, this command is grayed out and cannot be selected.
Page Selection...
Displays the Page Selection dialog box.
This command allows you to specify the page number of the page to be displayed.
Note
If the pages are being spooled, the last spooled page becomes the last page.
If the Page Layout setting on the Page Setup tab is specified to Page Layout, Tiling/
Poster, or Booklet, the number of pages is the number of sheets to be used for printing, and not the number of pages in the original document created with the application software.
If duplex printing manually has been set, the front pages which will be printed first are all displayed together, and then the back pages are displayed.
Zoom Menu
Selects the ratio of the actual size printed on the paper to the preview display size.
You can also select the ratio from the drop-down list box located on the toolbar.
Whole
Displays the entire page of data as one page.
141
50%
Reduces the displayed data to 50% of the actual size to be printed.
100%
Displays the data at the actual size to be printed.
200%
Enlarges the displayed data to 200% of the actual size to be printed.
400%
Enlarges the displayed data to 400% of the actual size to be printed.
Option Menu
This menu includes the following command:
Displays Print Page Information
Displays print setup information (including printer paper size, media type, and page layout) for each page at the left side of the preview screen.
This screen also allows you to change the media type and paper source settings.
Help Menu
When you select this menu item, the Help window for Canon IJ Preview is displayed, and you can check the version and copyright information.
Start Printing button
Prints the documents selected in the document list.
The printed documents are deleted from the list, and when all documents are printed, the
Canon IJ XPS Preview closes.
Cancel Printing button
Ends the Canon IJ Preview, and cancels the printing of the document that is displayed on the preview screen.
You can click this button while spooling.
Print Page Information Screen
Displays print setup information for each page at the left side of the preview screen.
This screen also allows you to change the media type and paper source settings.
Printer Paper Size
Displays the paper size of the document to be printed.
Media Type
Displays the media type of the document to be printed.
Paper Source
Displays the paper source of the document to be printed.
142
Page Layout
Displays the page layout of the document to be printed.
Important
If the media type and paper source are set from the application software, those settings have priority and the changed settings may become ineffective.
143
Canon IJ XPS Preview Description
Canon IJ XPS Preview is an application software that displays what the print result will look like before a document is actually printed.
The preview reflects the information which is set within the printer driver and allows you to check the document layout, print order, and number of pages. The preview also allows you to edit the print document, edit the print pages, change the print settings, and perform other functions.
When you want to display a preview before printing, open the
, and check the Preview before printing check box on the Main tab.
If you do not want to display a preview before printing, uncheck the check box.
Important
To use the Canon IJ XPS Preview, you must have Microsoft .NET Framework 4 Client
Profile installed on your computer.
File Menu
Selects print operation and print history settings:
Prints the documents selected in the document list.
The printed documents are deleted from the list, and when all documents are printed, the Canon IJ XPS Preview closes.
This command has the same function as the Print on the toolbar and (Print) in the print settings area.
144
Print All Documents
Prints all documents in the document list and closes the Canon IJ XPS Preview.
Save Print History
Switches whether the documents printed from the Canon IJ XPS Preview are to be saved as print history entries.
History Entry Limit
Switches the maximum number of print history registrations.
Select 10 Entries, 30 Entries, or 100 Entries.
Important
If the limit on the number of registration is exceeded, the print history registrations are deleted starting from the oldest one.
Add documents from history to the list
Adds the document saved in the print history to the document list.
Exit
Ends the Canon IJ XPS Preview. The documents remaining in the document list will be deleted from the list.
This command has the same function as the Exit in the print settings area.
Edit Menu
Selects the method for editing multiple documents or pages.
Undo
Reverses the previous change.
If the change cannot be reversed, this function is grayed out and cannot be selected.
This command has the same function as the (Undo) on the toolbar.
Documents
Selects the method for editing print documents.
Combine Documents
Combines the document selected in the document list into one document.
If only one document is selected, this command is grayed out and cannot be selected.
This command has the same function as the (Combine Documents) on the toolbar.
Reset Documents
Returns the document selected in the document list to their status before they were added to the Canon IJ XPS Preview.
145
The combined documents are separated, and the original documents are restored.
This command has the same function as the (Reset Documents) on the toolbar.
Move Document
Use the following command to change the order of the documents selected in the document list.
Move to First
Moves the selected print document to the beginning of the document list.
If the currently selected document is the first document, this command is grayed out and cannot be selected.
Move Up One
Moves the selected print document one up from its current position.
If the currently selected document is the first document, this command is grayed out and cannot be selected.
Move Down One
Moves the selected print document one down from its current position.
If the currently selected document is the last document, this command is grayed out and cannot be selected.
Move to Last
Moves the selected print document to the end of the document list.
If the currently selected document is the last document, this command is grayed out and cannot be selected.
Delete Document
Deletes the selected document from the document list.
If the document list contains only one document, the document is grayed out and cannot be selected.
This command has the same function as the (Delete Document) on the toolbar.
Grayscale Printing
Allows you to change the monochrome print settings.
This command has the same functionality as the Grayscale Printing check box in the print settings area.
Page Layout Printing...
Opens the Page Layout Printing dialog box.
This dialog box allows you to set Page Layout Printing, Pages, Page Order, and
Page Border.
146
Duplex Printing...
Opens the Duplex Printing dialog box.
This dialog box allows you to set Duplex Printing (Manual), Stapling Side, and
Margin.
Copies...
Opens the Copies dialog box.
This dialog box allows you to set Copies, Collate, and Print from Last Page.
Pages
Selects the method for editing print pages.
Delete Page
Deletes the currently selected page.
If page layout printing is set, the pages enclosed with red frame will be deleted.
This command has the same function as the (Delete Page) on the toolbar.
Restore Page
Restores pages that were deleted with the Delete Page function.
To restore pages, you must select the View Deleted Pages check box on the
Option menu and display the deleted pages as thumbnails.
Move Page
Use the following command to change the order of the currently selected pages.
Move to First
Moves the currently selected page to the beginning of the document.
If the currently selected page is the first page, this command is grayed out and cannot be selected.
Move Forward One
Moves the currently selected page one position in front of its current position.
If the currently selected page is the first page, this command is grayed out and cannot be selected.
Move Backward One
Moves the currently selected page one position after its current position.
If the currently selected page is the last page, this command is grayed out and cannot be selected.
Move to Last
Moves the currently selected page to the end of the document.
If the currently selected page is the last page, this command is grayed out and cannot be selected.
147
View Menu
Selects the documents and pages to be displayed.
Documents
Use the following command to select the document to display.
First Document
Displays the first document in the document list.
If the currently selected document is the first document, this command is grayed out and cannot be selected.
Previous Document
Displays the document located before the currently displayed document.
If the currently selected document is the first document, this command is grayed out and cannot be selected.
Next Document
Displays the document located after the currently displayed document.
If the currently selected document is the last document, this command is grayed out and cannot be selected.
Last Document
Displays the last document in the document list.
If the currently selected document is the last document, this command is grayed out and cannot be selected.
Pages
Use the following command to select the page to be displayed.
First Page
Displays the first page of the document.
If the currently displayed page is the first page, this command is grayed out and cannot be selected.
Previous Page
Displays the page located before the currently displayed page.
If the currently displayed page is the first page, this command is grayed out and cannot be selected.
Next Page
Displays the page located after the currently displayed page.
If the currently displayed page is the last page, this command is grayed out and cannot be selected.
148
Last Page
Displays the last page of the document.
If the currently displayed page is the last page, this command is grayed out and cannot be selected.
Page Selection...
Displays the Page Selection dialog box.
This command allows you to specify the page number of the page to be displayed.
Note
If the Page Layout setting in the printer driver is specified to Tiling/Poster, or
Booklet, the number of pages is the number of sheets to be used for printing, and not the number of pages in the original document created with the application software.
Zoom Menu
Selects the ratio of the actual size printed on the paper to the preview display size.
You can also select the ratio from the drop-down list box located on the toolbar.
Whole
Displays the entire page of data as one page.
50%
Reduces the displayed data to 50% of the actual size to be printed.
100%
Displays the data at the actual size to be printed.
200%
Enlarges the displayed data to 200% of the actual size to be printed.
400%
Enlarges the displayed data to 400% of the actual size to be printed.
Option Menu
Toggles the show / hide status of the following information.
View Thumbnails
Reduces all pages in the document selected in the document list and displays them at the bottom of the preview window.
This command has the same function as the (View Thumbnails) on the toolbar.
View Document List
Displays the print document list at the top of the preview window.
149
View Print Settings Area
Displays the print settings area at the right side of the preview window.
View Deleted Pages
When the thumbnails are displayed, this function displays pages that were deleted with the Delete Page function.
To check deleted pages, you must first select the View Thumbnails check box.
Keep printed documents on the list
Leaves the printed document in the document list.
Print Settings Displayed at Startup
Switches the tab of the print settings area to be displayed when the Canon IJ XPS
Preview is started.
Select Page Information, Layout, or Manual Color Adjustment.
Help Menu
When you select this menu item, the Help window for Canon IJ XPS Preview is displayed, and you can check the version and copyright information.
(Print)
Prints the documents selected in the document list.
The printed documents are deleted from the list, and when all documents are printed, the
Canon IJ XPS Preview closes.
(Combine Documents)
Combines the document selected in the document list into one document.
If only one document is selected, this command is grayed out and cannot be selected.
(Delete Document)
Deletes the selected document from the document list.
If the document list contains only one document, the document is grayed out and cannot be selected.
(Reset Documents)
Returns the document selected in the document list to their status before they were added to the Canon IJ XPS Preview.
The combined documents are separated, and the original documents are restored.
(View Thumbnails)
Reduces all pages in the document selected in the document list and displays them at the bottom of the preview window.
To hide the print pages, click View Thumbnails again.
150
Move Document
Use the following command to change the order of the documents selected in the document list.
(Move to First)
Moves the selected print document to the beginning of the document list.
If the currently selected document is the first document, this command is grayed out and cannot be selected.
(Move Up One)
Moves the selected print document one up from its current position.
If the currently selected document is the first document, this command is grayed out and cannot be selected.
(Move Down One)
Moves the selected print document one down from its current position.
If the currently selected document is the last document, this command is grayed out and cannot be selected.
(Move to Last)
Moves the selected print document to the end of the document list.
If the currently selected document is the last document, this command is grayed out and cannot be selected.
(Undo)
Reverses the previous change.
If the change cannot be reversed, this function is grayed out and cannot be selected.
(Delete Page)
Deletes the currently selected page.
If page layout printing is set, the pages enclosed with red frame will be deleted.
Document list
Displays the list of the print documents.
The document selected in the document list becomes the target for preview display and editing.
Document Name
Displays the name of the print document.
If you click the name of the selected print document, a text box is displayed, and you can rename the document to any name.
Pages
Displays the number of pages in the print document.
151
Important
The number displayed in Pages and the output page count are different.
To check the output page count, check the status bar at the bottom of the preview window.
Status
Displays the status of the print documents.
Documents that are undergoing data processing are displayed as Processing data.
Important
Documents showing Processing data cannot be printed or edited.
Wait until the data processing ends.
Print Settings Area Screen
Allows you to check and change the print settings of the documents selected in the document list.
Print Settings Area is displayed on the right side of the preview window.
Page Information tab
The print settings are displayed for each page.
You can change the media type and paper source settings.
Printer Paper Size
Displays the paper size of the document to be printed.
Media Type
Allows you to select the media type of the document to be printed.
Paper Source
Allows you to select the paper source of the document to be printed.
Page Layout
Displays the page layout of the document to be printed.
Layout tab
You can specify settings for page layout printing.
To apply the specified settings, click Apply.
If the page layout print settings cannot be changed for the print document, the individual items are grayed out and cannot be selected.
Manual Color Adjustment tab
This tab allows you to adjust the color balance by changing the settings of the Cyan,
Magenta, Yellow, Brightness, Intensity, and Contrast options.
152
Cyan/Magenta/Yellow
Adjusts the strengths of Cyan, Magenta, and Yellow.
Moving the slider to the right makes a color stronger, and moving the slider to the left makes a color weaker.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
This adjustment changes the relative amount of ink of each color used, which alters the total color balance of the document. Use your application software if you want to change the total color balance significantly. Use the printer driver only if you want to adjust the color balance slightly.
Brightness
Selects the brightness of your print.
Pure white and black will not change, but colors between white and black will change.
Intensity
Adjusts the overall intensity of your print.
Moving the slider to the right increases the intensity, and moving the slider to the left decreases the intensity.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Contrast
Adjusts the contrast between light and dark in the image to be printed.
Moving the slider to the right increases the contrast, moving the slider to the left decreases the contrast.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
Defaults
Restores all the settings you have changed to their default values.
Clicking this button restores all the settings on this tab to their default values (factory settings).
Important
When Grayscale Printing is checked, Cyan, Magenta, and Yellow appear grayed out and are unavailable.
Grayscale Printing
Allows you to change the monochrome print settings.
153
Duplex Printing (Manual)
Select whether to print the document to both sides of the paper manually or to one side of the paper.
If the duplex print settings cannot be changed for the print document, this item is grayed out and is unavailable.
Important
When you select Booklet for Page Layout, Duplex Printing (Manual) of the print settings area will be set automatically. In this case, Duplex Printing (Manual) is grayed out and is unavailable.
Copies
Specifies the number of copies you want to print. You can specify a value from 1 to 999.
If the numbers of copies cannot be changed for the print document, this item is grayed out and is unavailable.
Exit
Ends the Canon IJ XPS Preview.
The documents remaining in the document list will be deleted from the list.
Prints the documents selected in the document list.
The printed documents are deleted from the list, and when all documents are printed, the Canon IJ XPS Preview closes.
154
Canon IJ Status Monitor Description
The Canon IJ Status Monitor displays the status of the machine and the printing progress.
The monitor uses graphics, icons, and messages to let you know the machine status.
Canon IJ Status Monitor Features
The Canon IJ Status Monitor offers the following advantages:
You can check the status of the printer on the screen.
The status of the machine is shown on the screen in real time.
You can check the printing progress of each printing document (print job).
Error types and solutions are shown on the screen.
Shown when a machine error occurs.
You can immediately check how to respond.
You can check the ink status.
This function displays graphics showing the FINE cartridge type and the estimated ink levels.
Icons and messages are displayed when ink is running low (ink level warning).
Canon IJ Status Monitor Overview
Canon IJ Status Monitor allows you to check the status of the machine and ink with graphics and messages.
You can check the information on the printing document and the printing progress during printing.
When a printer error occurs, it shows the cause and solution. Follow the instruction in the message.
Printer
Canon IJ Status Monitor shows an icon when a warning or error occurs to the printer.
: Indicates that a warning (operator call error) has occurred or the printer is working.
: There has been an error which requires a service.
155
FINE cartridge
Canon IJ Status Monitor shows an icon when a low ink warning or a no ink error occurs.
In addition, this function displays graphics showing the estimated ink levels of the FINE cartridge.
In this case, click the graphics to open the Ink Details dialog box. You can check the detail information such as the remaining ink level and the FINE cartridge types for your printer.
Document Name
Shows the name of the document to be printed.
Owner
Shows the owner's name of the document to be printed.
Printing Page
Shows the number of printing page and total printing pages.
Display Print Queue
Shows the print window used to manage the print job that is being printed or being in the print queue.
Cancel Printing
Cancels the current print job.
Important
The Cancel Printing button is enabled only while print data is being sent to the machine. Once the print data has been sent, the button is grayed out and becomes unavailable.
Option Menu
If you select Enable Status Monitor, when a machine related message is generated the Canon IJ Status Monitor starts.
When Enable Status Monitor is selected, following commands are available.
Always Display Current Job
Displays the Canon IJ Status Monitor during printing.
Always Display on Top
Displays the Canon IJ Status Monitor in front of other windows.
Display Warning Automatically
When a Low Ink Warning Occurs
Starts the Canon IJ Status Monitor window automatically and displays it in front of the other windows when a low ink warning occurs.
156
Start when Windows is Started
Starts the Canon IJ Status Monitor automatically when you start Windows.
Ink Details Menu
Select this menu to display the Ink Details dialog box. Check the detail information such as the remaining ink level and the FINE cartridge types for your machine.
Ink Details dialog box
This function displays graphics and messages showing the FINE cartridge type and the estimated ink levels.
Ink Information (displayed at left)
Shows the FINE cartridge types with graphics.
If a warning or error related to the remaining ink level occurs, the print driver displays an icon to let you know.
If the icon is displayed, operate the printer according to the instructions displayed on the screen.
Message (displayed at right)
Shows information such as the ink status and ink colors with sentences.
Ink Model Number button
Shows the FINE cartridge types for your machine.
Close
Closes the Ink Details dialog box to return to Canon IJ Status Monitor.
Help Menu
When you select this menu item, the Help window for Canon IJ Status Monitor is displayed, and you can check the version and copyright information.
157
Updating the MP Drivers
Obtaining the Latest MP Drivers
Deleting the Unnecessary MP Drivers
Before Installing the MP Drivers
158
Obtaining the Latest MP Drivers
The MP Drivers include a printer driver and ScanGear (scanner driver).
By updating the MP Drivers to the latest version of the MP Drivers, unresolved problems may be solved.
You can access our website and download the latest MP Drivers for your model.
Important
You can download the MP Drivers for free, but any Internet access charges incurred are your responsibility.
Before installing the latest MP Drivers, delete the previously installed version
.
Related Topics
Before Installing the MP Drivers
159
Deleting the Unnecessary MP Drivers
The MP Drivers which you no longer use can be deleted.
When deleting the MP Drivers, first exit all programs that are running.
The procedure to delete the unnecessary MP Drivers is as follows:
1.
Start the uninstaller
• If you are using Windows 8, from the Desktop charms, select Settings -> Control
Panel -> Programs -> Programs and Features.
From the program list, select "XXX MP Drivers" (where "XXX" is your model name) and then click Uninstall.
• If you are using Windows 7 or Windows Vista, select Start menu -> Control
Panel -> Programs -> Programs and Features.
From the program list, select "XXX MP Drivers" (where "XXX" is your model name) and then click Uninstall.
• If you are using Windows XP, select Start menu -> Control Panel -> Add or
Remove Programs.
From the program list, select "XXX MP Drivers" (where "XXX" is your model name) and then click Remove.
The confirmation window for uninstalling the model appears.
Important
In Windows 8, Windows 7, or Windows Vista, a confirmation/warning dialog box may appear when starting, installing or uninstalling software.
This dialog box appears when administrative rights are required to perform a task.
When you are logged on to an administrator account, click Yes (or Continue,
Allow) to continue.
Some applications require an administrator account to continue. When you are logged on to a standard account, switch to an administrator account, and restart the operation from the beginning.
2.
Execute the uninstaller
Click Execute. When the confirmation message appears, click Yes.
When all the files have been deleted, click Complete.
The deletion of the MP Drivers is complete.
160
Important
Printer driver, XPS printer driver, and ScanGear (scanner driver) will be deleted when you uninstall the MP Drivers.
161
Before Installing the MP Drivers
This section describes the items that you should check before installing the MP Drivers.
You should also refer to this section if the MP Drivers cannot be installed.
Checking the Machine Status
• Confirm that the USB port of this machine and the computer are firmly connected with the USB cable.
• Turn off the machine.
Checking the Personal Computer Settings
• Terminate all running applications.
• In Windows 8, Windows 7, or Windows Vista, log on as a user who has the administrator account.
In Windows XP, log on as the computer administrator.
Important
Before installing the latest MP Drivers, delete the previously installed version
.
Related Topics
Obtaining the Latest MP Drivers
162
Installing the MP Drivers
You can access our web site through the Internet and download the latest MP Drivers and
XPS printer driver for your model.
The procedure for installing the downloaded MP Drivers is as follows:
1.
Turn off the machine
2.
Start the installer
Double-click the icon of the downloaded file.
The installation program starts.
Important
In Windows 8, Windows 7, or Windows Vista, a confirmation/warning dialog box may appear when starting, installing or uninstalling software.
This dialog box appears when administrative rights are required to perform a task.
When you are logged on to an administrator account, click Yes (or Continue,
Allow) to continue.
Some applications require an administrator account to continue. When you are logged on to a standard account, switch to an administrator account, and restart the operation from the beginning.
3.
Install the MP Drivers
Take the appropriate action as described on the screen.
Note
To use a network printer from a client machine, you must manually select the connection destination from the client.
To manually select a connection destination, click Cancel in the Connect Cable window. When the confirmation message appears, click Yes.
In the Installation Incomplete window, select the Select printer port check box, click Manual Selection, and then select the appropriate port.
4.
Complete the installation
Click Complete or Finish.
The procedure for installing the MP Drivers is complete.
Depending on the environment you are using, a message prompting you to restart the computer may be displayed. To complete the installation properly, restart the computer.
163
Important
You can install the XPS printer driver with the same procedure for installing the MP
Drivers. However, when installing the XPS printer driver, first complete installation of the
MP Drivers.
You can download the MP Drivers and XPS printer driver for free, but any Internet access charges incurred are your responsibility.
Before installing the latest MP Drivers, delete the previously installed version
.
Related Topics
Obtaining the Latest MP Drivers
Deleting the Unnecessary MP Drivers
Before Installing the MP Drivers
164
Sharing the Printer on a Network
When multiple computers are being used in the network environment, you can share the printer connected to one computer with the other computers.
The Windows versions of the computers connected to the network do not necessarily have to be the same.
•
This section describes the procedure for setting a computer that connects with this printer directly through a USB cable.
•
This section describes the procedure for setting a computer that uses this printer though a network.
When you execute print, the data is sent to the printer through the print server system.
Important
In case an error occurred when a document is printed by the client system to a shared printer, the error message of Canon IJ Status Monitor will be displayed both on the client system and the print server system. For regular printing, Canon IJ Status Monitor will be displayed only on the client system.
Note
You must install a print driver in the print server and in each client.
Related Topic
Restrictions on Printer Sharing
165
Settings on Print Server
When you use the printer on a network, set up the printer driver for sharing on the print server system.
The procedure for setting up the print server systems is as follows:
1.
Install the MP Drivers on the print server system
2.
Select as described below:
• If you are using Windows 8, from the Desktop charms, select Settings -> Control
Panel -> Hardware and Sound -> Devices and Printers.
• If you are using Windows 7, select the Start menu -> Devices and Printers.
• If you are using Windows Vista select the Start menu -> Control Panel ->
Hardware and Sound -> Printers.
• If you are using Windows XP, select the start menu -> Control Panel -> Printers
and Other Hardware -> Printers and Faxes.
The Devices and Printers window (Windows 8, Windows 7), Printers window
(Windows Vista) or Printers and Faxes window (Windows XP) is displayed.
3.
Click the icon for the model name of printer to be shared
• If you are using Windows 8, press the Alt key, and from the displayed File menu, click Printer properties -> "Your model name" -> Sharing tab.
• If you are using Windows 7, press the Alt key on your keyboard and then select
Printer properties -> Sharing tab from the displayed File menu.
• If you are using Windows Vista, press the Alt key on your keyboard and then select Run as administrator -> Sharing... from the displayed File menu.
• If you are using Windows XP, select Sharing... from the File menu.
Important
In Windows 8, Windows 7, or Windows Vista, a confirmation/warning dialog box may appear when starting, installing or uninstalling software.
This dialog box appears when administrative rights are required to perform a task.
166
When you are logged on to an administrator account, click Yes (or Continue,
Allow) to continue.
Some applications require an administrator account to continue. When you are logged on to a standard account, switch to an administrator account, and restart the operation from the beginning.
Note
Windows XP may display a message recommending the user to use the
Network Setup Wizard to set up sharing.
When this message appears, choose not to use the wizard and then set up sharing.
4.
Set sharing
Select Share this printer on the Sharing tab to set a shared name if necessary, and click OK.
The setup on the print server system is complete. Next, set up the client systems.
167
Settings on Client PC
After setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
If you are using Windows 8, Windows 7, or Windows Vista
1.
Install the MP Drivers on the client systems
Note
You must manually select the connection destination on the client computer.
During installation, click Cancel in the Connect Cable window. When the confirmation message appears, click Yes.
In the Installation Incomplete window, select the Select printer port check box, click Manual Selection, and then select the appropriate port.
2.
Start the wizard
• If you are using Windows 8, from the Desktop charms, select Settings -> Control
Panel -> Hardware and Sound -> Devices and Printers -> Add a printer.
• If you are using Windows 7, select the Start menu -> Devices and Printers ->
Add a printer.
• If you are using Windows Vista, select the Start menu -> Network -> Add
Printer.
The Add Printer window appears.
3.
Add a printer
Select Add a network, wireless or Bluetooth printer, and click the icon for the printer that you have configured on the print server system to be shared, and then click Next.
Note
If the icon for the printer is not displayed, check that the printer is actually connected to the print server.
It may take some time for the icon for the printer to appear.
4.
Complete the setup
168
Take the appropriate action as described on the screen and then click Finish.
• If you are using Windows 8 or Windows 7, the icon for the shared printer will be created in the Devices and Printers window.
• If you are using Windows Vista, the icon for the shared printer will be created in the Printers window.
The setup on the client systems is complete. You can now share the printer in the network.
If you are using Windows XP
1.
Install the printer driver on the client systems
For installation instructions, see "
Note
You must manually select the connection destination on the client computer.
During installation, click Cancel in the Connect Cable window. When the confirmation message appears, click Yes.
In the Installation Incomplete window, select the Select printer port check box, click Manual Selection, and then select the appropriate port.
2.
Start the wizard
Select the start menu -> Control Panel -> Printers and Other Hardware ->
Printers and Faxes -> Add a printer.
When Welcome to the Add Printer Wizard screen appears, click Next.
3.
Add a printer
Select A network printer, or a printer attached to another computer, then click
Next.
On the Specify a Printer window, click Next and then search for the print server system.
Click the icon for the printer that you have configured on the print server system to be shared, and then click Next.
Note
If the icon for the printer is not displayed, check that the printer is actually connected to the print server.
169
4.
Complete the setup
Take the appropriate action as described on the screen and then click Finish.
The icon for the shared printer will be created in the Printers and Faxes window.
The setup on the client systems is complete. You can now share the printer in the network.
170
Restrictions on Printer Sharing
If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS
Preview" when reading this information.
These are restrictions that apply when you are using a printer in a network environment.
Check the restrictions for the environment you are using.
When You Are Sharing a Printer in a Network
• A print completion message may be displayed. To disable the message from being displayed, follow the procedure below.
• If you are using Windows 8:
In the Devices and Printers window of the client, select the printer from Printers, and click Print server properties on the command bar.
Uncheck Show informational notifications for network printers on the Advanced tab, and then restart the computer.
• If you are using Windows 7:
In the Devices and Printers window of the client, select the printer from Printers and
Faxes, and click Print server properties on the command bar.
Uncheck Show informational notifications for network printers on the Advanced tab, and then restart the computer.
• If you are using Windows Vista:
Press the Alt key from the Printers window on the client system. Open Run as
administrator -> Server Properties... from the displayed File menu.
Uncheck Show informational notifications for network printers on the Advanced tab, and then restart the computer.
• If you are using Windows XP:
Open Server Properties from the File menu of the Printers and Faxes window on the print server system.
Uncheck Notify when remote documents are printed on the Advanced tab, and then restart the computer.
• The bi-directional communication function is disabled and the correct printer status may not be recognized.
171
If a client user opens the printer driver properties (to display the properties when using
Windows 8 or Windows 7, press the Alt key, and select Printer properties from the displayed File menu) and then clicks OK with the Enable bidirectional support check box cleared on the Ports tab, the bidirectional communication function of the print server may also be disabled.
In this case, check Enable bidirectional support check box on both the print server system and the client system.
• When you print from a client system, you cannot use Canon IJ Preview.
• When the functions on the Maintenance tab cannot be set properly from a client system, they may be grayed out. In this case, change the settings from the print server.
When you change the settings of the print server, you should delete the icon of the shared printer from the client system, and then specify the shared settings again in the client system.
When the Same Printer Driver is Installed in the Print Server System and the Client System as the Local Printer
• The net crawl function may automatically create a network printer icon on the client system.
172
Copying
Basic
Switching the Page Size between A4 and Letter
173
Making Copies
Load the original on the platen glass to copy.
1. Make sure that the machine is turned on.
2. Load A4 or Letter-sized plain paper.
3. Load the original on the platen glass.
Note
• You can switch the size of paper loaded in the rear tray between A4 and Letter.
Switching the Page Size between A4 and Letter
4. Press the Color button for color copying, or the Black button for black & white copying.
The machine starts copying.
Remove the original on the platen glass after copying is complete.
To make multiple copies
Press the Color button or the Black button repeatedly according to the number of copies you want.
Press the same button (Color button or Black button) as the one which you previously pressed.
Important
• Do not open the document cover or remove the original from the platen glass until scanning is completed.
While the machine is scanning the original, the ON lamp keeps flashing.
• If the original covers the whole page, area (B) in the figure below cannot be printed.
(A) The direction in which the paper is ejected
(B) Unprintable area
For details on the printable area:
• For A4 sized paper:
Other Sizes than Letter, Legal, Envelopes
• For Letter-sized paper:
Letter, Legal
174
Note
• To cancel copying, press the Stop button.
• To set the print quality to "Draft" (speed priority)
You can set the print quality to "Draft" (speed priority) following the procedure below.
1. Press and hold down the Color or Black button for 2 or more seconds in step 4.
The ON lamp flashes once.
2. Release the button.
The machine starts copying.
When the print quality is set to "Draft", print speed is given priority over quality. To give priority to quality, press the Color or Black button for less than 2 seconds to copy in the print quality "Standard".
175
Switching the Page Size between A4 and Letter
You can switch the size of paper loaded on the rear tray between A4 and Letter.
This setting is useful if you usually load Letter-sized paper in the rear tray.
1. Make sure that the machine is turned on.
2. Press and hold the Stop button until the Alarm lamp flashes 10 times.
3. Release the Stop button.
The ON lamp starts flashing instead of remaining lit.
4. Press the Black button to select A4, or the Color button to select Letter.
The ON lamp stops flashing and remains lit, then the paper size is changed.
Note
• When you switch the page size to A4 or Letter, load paper of the selected size.
When the page size is set to A4, load A4 plain paper.
When the page size is set to Letter, load Letter-sized plain paper.
• This setting is retained even if the machine is turned off.
176
advertisement
Key Features
- Compact and space-saving design
- High-quality printing, copying, and scanning
- Wi-Fi connectivity for wireless printing
- Versatile paper handling options
- Easy-to-use control panel
- Affordable and budget-friendly
Related manuals
Frequently Answers and Questions
How do I connect the MG2450 to my Wi-Fi network?
What types of paper can I use with the MG2450?
How do I troubleshoot printing problems?
What is the print quality of the MG2450?
Can I print from my smartphone with the MG2450?
advertisement
Table of contents
- 4 Printing
- 5 Printing from a Computer
- 6 Printing with Application Software that You are Using (Printer Driver)
- 7 Printing with Easy Setup
- 10 Setting the Media Type with the Printer Driver
- 11 Various Printing Methods
- 12 Setting a Page Size and Orientation
- 14 Setting the Number of Copies and Printing Order
- 17 Setting the Stapling Margin
- 19 Fit-to-Page Printing
- 21 Scaled Printing
- 24 Page Layout Printing
- 26 Tiling/Poster Printing
- 30 Booklet Printing
- 32 Duplex Printing
- 34 Stamp/Background Printing
- 37 Registering a Stamp
- 41 Registering Image Data to be Used as a Background
- 45 Setting Up Envelope Printing
- 47 Displaying the Print Results before Printing
- 48 Setting Paper Dimensions (Custom Size)
- 50 Editing the Print Document or Reprinting from the Print History
- 54 Changing the Print Quality and Correcting Image Data
- 55 Setting the Print Quality Level (Custom)
- 57 Printing a Color Document in Monochrome
- 59 Specifying Color Correction
- 62 Optimal Photo Printing of Image Data
- 64 Adjusting Colors with the Printer Driver
- 66 Printing with ICC Profiles
- 70 Adjusting Color Balance
- 73 Adjusting Color Balance Using Sample Patterns (Printer Driver)
- 78 Adjusting Brightness
- 80 Adjusting Intensity
- 82 Adjusting Contrast
- 84 Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
- 88 Overview of the Printer Driver
- 89 Canon IJ Printer Driver
- 90 How to Open the Printer Driver Setup Window
- 92 Canon IJ Status Monitor
- 94 Checking the Ink Status from Your Computer
- 95 Canon IJ Preview
- 96 Deleting the Undesired Print Job
- 97 Instructions for Use (Printer Driver)
- 99 Printer Driver Description
- 100 Quick Setup tab Description
- 107 Main tab Description
- 115 Page Setup tab Description
- 131 Maintenance tab Description
- 140 Canon IJ Preview Description
- 144 Canon IJ XPS Preview Description
- 155 Canon IJ Status Monitor Description
- 158 Updating the MP Drivers
- 159 Obtaining the Latest MP Drivers
- 160 Deleting the Unnecessary MP Drivers
- 162 Before Installing the MP Drivers
- 163 Installing the MP Drivers
- 165 Sharing the Printer on a Network
- 166 Settings on Print Server
- 168 Settings on Client PC
- 171 Restrictions on Printer Sharing
- 173 Copying
- 174 Making Copies
- 176 Switching the Page Size between A4 and Letter