Duplex Printing. Canon PIXMA MG2450, Pixma MG 2455, PIXMA MG2440, PIXMA MG2400 serie

Duplex Printing

The procedure for printing data on both sides of a sheet of paper is as follows:

You can also set duplex printing in Additional Features on the Quick Setup tab.

1.

Open the

printer driver setup window

2.

Set duplex printing

Check the Duplex Printing (Manual) check box on the Page Setup tab.

3.

Select the layout

Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list.

4.

Specify the side to be stapled

The best Stapling Side is selected automatically from the Orientation and Page

Layout settings. To change the setting, select another stapling side from the list.

5.

Set the margin width

32

If necessary, click Specify Margin... and set the margin width, and then click OK.

6.

Complete the setup

Click OK on the Page Setup tab.

When you execute print, the document is first printed on one side of a sheet of paper.

After one side is printed, reload the paper correctly according to the message.

Then click Start Printing to print the opposite side.

Important

When a media type other than Plain Paper is selected from Media Type on the Main tab, Duplex Printing (Manual) appears grayed out and is unavailable.

When Tiling/Poster or Booklet is selected from the Page Layout list, Duplex

Printing (Manual) and Stapling Side appear grayed out and are unavailable.

Note

If the back side of the paper becomes smudged during duplex printing, perform

Bottom Plate Cleaning in the Maintenance tab.

Related Topics

Cleaning Inside the Machine

Changing the Machine Operation Mode

33