Restrictions on Printer Sharing. Canon PIXMA MG2450, Pixma MG 2455, PIXMA MG2440, PIXMA MG2400 serie

Restrictions on Printer Sharing

If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS

Preview" when reading this information.

These are restrictions that apply when you are using a printer in a network environment.

Check the restrictions for the environment you are using.

When You Are Sharing a Printer in a Network

• A print completion message may be displayed. To disable the message from being displayed, follow the procedure below.

• If you are using Windows 8:

In the Devices and Printers window of the client, select the printer from Printers, and click Print server properties on the command bar.

Uncheck Show informational notifications for network printers on the Advanced tab, and then restart the computer.

• If you are using Windows 7:

In the Devices and Printers window of the client, select the printer from Printers and

Faxes, and click Print server properties on the command bar.

Uncheck Show informational notifications for network printers on the Advanced tab, and then restart the computer.

• If you are using Windows Vista:

Press the Alt key from the Printers window on the client system. Open Run as

administrator -> Server Properties... from the displayed File menu.

Uncheck Show informational notifications for network printers on the Advanced tab, and then restart the computer.

• If you are using Windows XP:

Open Server Properties from the File menu of the Printers and Faxes window on the print server system.

Uncheck Notify when remote documents are printed on the Advanced tab, and then restart the computer.

• The bi-directional communication function is disabled and the correct printer status may not be recognized.

171

If a client user opens the printer driver properties (to display the properties when using

Windows 8 or Windows 7, press the Alt key, and select Printer properties from the displayed File menu) and then clicks OK with the Enable bidirectional support check box cleared on the Ports tab, the bidirectional communication function of the print server may also be disabled.

In this case, check Enable bidirectional support check box on both the print server system and the client system.

• When you print from a client system, you cannot use Canon IJ Preview.

• When the functions on the Maintenance tab cannot be set properly from a client system, they may be grayed out. In this case, change the settings from the print server.

When you change the settings of the print server, you should delete the icon of the shared printer from the client system, and then specify the shared settings again in the client system.

When the Same Printer Driver is Installed in the Print Server System and the Client System as the Local Printer

• The net crawl function may automatically create a network printer icon on the client system.

172