The USS-DBS 0.1mg models adopt high precision electromagnetic force balance sensor which makes the scales capable of fast and accurate weighing function and better reliability.

The USS-DBS 0.1mg series balance scales have multiple operation keys, which make it easier to use the scales.

To ensure that you can make full use of the performance of your USS-DBS

0.1mg series balance scales, please read this instruction manual carefully and use the balance scale correctly in accordance with the directions in the manual. When you have finished reading the manual, keep it in a safe place together with the balance so that you can refer to it at any time.

Function Keys

1. PRT key: for printing and menu.

2. OFF: Turn off key.

3. TAR: Tare key

4. ON: Turn on key.

5. CAL: Calibration key

“±” Symbol

7. Stability Symbol

Specifications

Model

Max.Capacity

Min.Capacity

Division

Verification Value

Linearity

Repeatability

Accuracy Class

Max. Permissive

Error(MPE)

Settling time

Operating

Temperature

Relative

Humidity(RH)

Pan Size

Windshield

(L*W*H)

Dimensions

(L*W*H)

Net Weight

Power Supply

USS-

DBS4

USS-

DBS5

USS-

DBS6

USS-

DBS7

USS-

DBS8

USS-

DBS9

USS-

DBS10

USS-

DBS11

USS-

DBS12

USS-

DBS13

100g 120g 160g 180g 200g 210g 220g 300g 310g 320g

10mg 10mg 10mg 10mg 10mg 10mg 10mg 10mg 10mg 10mg

0.0001 g

0.001 g

±0.0003 g

±0.0002 g

(Chinese Standard)

0≤m≤50g, ±0.5 mg

50 g<m≤200 g, ±1.0mg

m>200 g, ±1.5 mg

≤8 seconds

17.5°C~22.5°C,fluctuation range<1°C/h

50%~75%

Ф80 mm

225 mm * 220 mm * 265 mm(L*W*H)

340 mm * 215 mm * 350 mm(L*W*H)

7.2 kg

AC110 - 240V 50/60Hz DC 9 V-2.2A by using the universal adapter

Setting

1. Assembling

Please open the packaging carefully and take out the balance scale and other articles gently. Keep the packing material so as to reuse.

Contents of the box:

1) Balance Body

2) Stainless Steel Pan

3) Power Wire(AC adapter)

4) Product Manual

5) Maintenance Card

6) Weight

7) Textile Protection.

2. Working condition

When USS-DBS 0.1mg series multi-functional electronic balance scale is used under routine test lab or Industrial measuring room, the weighing speed will be much quicker and the result more accurate. Below are the standards of working condition.

1) The working room should be clean and dry.

2) The balance scale should be placed on the steady, fixed table.

3) Better to place the table far away from the door and window in order to avoid the influence of airflow.

4) The table should be put at a place with less vibration such as the corners in the room.

5) The balance should be put far away from sunlight and radiation.

6) Put the balance far away from magnetism.

7) Don’t use the balance in dangerous place of explosion.

8) Don’t use the balance under the condition of high humidity and high dust for long.

9) When moving the scale from a colder place to a warmer place, the accuracy and reliability will be influenced by the moisture condensation inside. In order to eliminate this influence, it’s best to put the scale in the working place without power supply for 2 hours.

10) Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.Best temperature for the scale is 20°C -25°C with fluctuation less than 1°C/h.

11) Keep the balance scale clean. Do not stack stuff on the balance scale when not in use.

12) Working voltage: AC110 - 240V 50/60Hz DC5V-2A by using the universal adapter.

Operating

A. Adjustment

• Check the level meter before operation. If the bubble is not in the center, correct the adjustable feet to make the bubble in the center.

B. Start

• Select an appropriate line voltage and set the voltage switch to the corresponding position.

• For best performance, let the balance scale warm up for 30-60 min. and calibrate it before using.

• Press the key “ON”, the display will light up.

Check the function of the display. About 2 seconds later, the model of the balance will be displayed. For example:

Then the weighing mode:

Press slightly the button “OFF”, the display will go out. If the balance will not be used for a long time, the power plug should be disconnected.

“TAR” Clear and Tare

Put the container on the pan, the weight of the container should be displayed.

Press “TAR” button, the display will go out and the display will be all zeroes.

Taring is completed:

When the container is removed, a negative value of the container weight will be displayed.

Press “TAR” again, the display will be all zeroes, i.e. the balance clears.

C: Calibration

1. Press “CAL”

The weight value will flash.

The calibration record is being output.

2. Place the calibration weight on the pan.

Open the glass door in the windshield, place the weight on the pan, and shut the glass door again. Wait until the flashing weight value display changes to “200.0000g”.

3. Take the weight off the pan.

Open the glass door in the windshield, remove the weight from the pan and shut the glass door again.

“0.0000g” will show up and the balance will return to the weighing mode.

Standard Weight

Choose standard weight as requirement according to different types.

Model

USS-DBS4 USS- DBS5 USS-DBS6

USS- DBS7

USS-DBS8 USS- DBS9

USS-DBS10 USS-DBS11

Standard weight

100g

200g

USS-DBS series balance should be warmed up for 0.5 - 1 hour

Sensitive Setting

SEt-A

Press

PRT

Loose

Max sensitive level

ASD-0

Press

Tare

High sensitive

ASD-1

Low sensitive level Common sensitive

ASD-3 ASD-2

For bad condition

Speed Setting

SEt-1

Press

PRT

Loose

Quick showing

INT-0

Press

Tare

Integral celerity

INT-1

Slower

INT-3

Common

INT-2

Output setting

SEt-P

Press

PRT

Loose

Press output

PRT-0

Timing 30 output

PRT-1

Press

Tare

Timing 60 output

PRT-2

Continuous output

PRT-4

Timing 120 output

PRT-3

SEt-0

Counting

Press

PRT

Loose

Back to weighing

COU-00

Press

Cal

Put 10 samples on the scale pan

Press “CAL” ,it will show “10”

COU-10

Put 50 samples on the scale pan

Press “CAL”, it will show “50”

COU-50

Put 25 samples on the scale pan

Press “CAL”, it will show “25”

COU-25

SEt-F

Output interface

Press

PRT

Loose

Baud rate 1200

F-1200

Press

Tare

Baud rate 2400

F-2400

Baud rate 9600

F-9600

Baud rate 4800

F-4800

Interface

A) To meet customers’ needs, RS-232C interface is installed on to the scale.

Ways of connection:

Scale (nine cores) Micro-kit (nine cores)

RXD (Input) 2……………………………………… 3

TXD (Output) 3…………………………………… 2

GND (Earth) 5………………………………………5

1 typ e

Spa ce

B).

(1) Default Baud rate of connection orifice is 1200bps.

(2) Data format: 10 bits, 0 as start bit, 1 as stop bit, 8 digits (ASCII code)

(3) No odd and even numbers adjusting.

C).

Data output: Default continuous output.

According to the manual, the output mode can be changed. PRT-0 is for “press output”, PRT-1, PRT-2, PRT-3 is for “timing output”, PRT-4 is for continuous output.

D). Output data format.

3 4 5 6 7 8 9 10 11 12 13 14 15 16

Spac e or * ± dat a dat a dat a data or dot data or dot dat a dat a dat a

Unit

2 en d retur n

Malfunction

No Display

Unstable Display

Difference between displayed value and actual value

Trouble shooting and solutions

Cause

No power supply;

Elimination

Plug in the adapter.

Something wrong with fuse; Change the fuse;

Power transformer is broken;

Bad Working Condition;

Change the power transformer;

Improve the working condition, avoid vibration and airflow.

Close the windshield.

Take out foreign object.

Windshield is open.

Something between the scale pan and working table.

The power exceeds its permissible value and is unstable

Unstable goods(moisture evaporation)

The scale hasn’t been calibrated.

Not return to zero

Not on a flat surface.

Connect AC 110 -240 V

Power supply.

Change scale.

Calibration

Tare

Adjust level.

Maintenance

USS-DBS 0.1mg series multi-functional electronic balance scale is an exact intelligent measuring instrument and needs maintenance.

1) Press the keys with hands other than sharp objects (such as pencils and ball-point pen);

2) Don’t let the goods fall from high to the scale pan.

3) Don’t expose the scale under high humidity and high dust.

4) Cover the scale with hood after use.

5) Keep the scale clean and dry.

Tips

Before cleaning, pull out the power supply;

Don’t use caustic cleanser (such as solvent).

Add some neutral detergent to a gentle cloth to clean the scale.

Don’t drop the water into the scale.

Dry the scale after cleaning.

Components

Serial No.

Content

Main scale

Scale pan

Adapter

Product manual

Calibrated weight

Cleaning cloth

No.

Appendix

The scale connecting to the computer:

1. Press “start"--- -Process----Attachment ----Communication----Super terminal

2. Input the name; choose the icon, then press confirmation.

3. Ignore the first two steps,, choose “N”: com 1”, press confirmation.

4. Choose:

(1) Baud rate: 1200 (or 2400 according to the manual);

(2) Data bit: 8

(3) Check out of odd and even: No

(4) Stop bit: 1

(5) Control of the data flow: hardware

Press confirmation and it will show the measuring value on the computer.

Contact

Feel free to visit our website www.ussolid.com.

You can email us at [email protected].

You can call one of our friendly customer service representative at

+1(800) 209-4177.

નમસ્તે! હું એક AI ચેટબોટ છું જે ખાસ કરીને U.S. SOLID USS-DBS USSDBS4 સાથે તમને સહાય કરવા માટે તાલીમ પામેલો છે. મેં દસ્તાવેજની સંપૂર્ણ સમીક્ષા કરી છે અને તમને જરૂરી ચોક્કસ માહિતી શોધવામાં અથવા સ્પષ્ટ અને સરળ શબ્દોમાં સામગ્રી સમજાવવામાં મદદ કરી શકું છું. પછી ભલે તમે ચોક્કસ સુવિધાઓ, મુશ્કેલીનિવારણ પગલાં અથવા સામાન્ય વપરાશ વિશે માર્ગદર્શન શોધી રહ્યા હોવ, તમારા પ્રશ્નો પૂછવા માટે નિઃસંકોચ રહો. તમે તમારી ચિંતાઓ અથવા જરૂરિયાતો વિશે જેટલી વધુ વિગતો પ્રદાન કરશો, તેટલી વધુ ચોક્કસ અને અસરકારક રીતે હું તમને સહાય કરી શકું છું!

સહાયક ટાઇપ કરી રહ્યા છે

સહાયક કીબોર્ડથી બહાર છે. કૃપા કરીને, પછીથી ફરી પ્રયાસ કરો.

સામગ્રીનું કોષ્ટક

એવું લાગે છે કે તમે એક એવા દસ્તાવેજ પર પહોંચી ગયા છો જે ઘણી ભાષાઓમાં લખાયેલ છે, જેમાં તમારી મૂળ ભાષા નથી. તમે તમારી પસંદગીની ભાષા વિનાના પૃષ્ઠોને અસ્થાયી રૂપે છુપાવવા માટે નીચેની લિંક્સનો ઉપયોગ કરી શકો છો.