2. Working condition. U.S. Solid USS-DBS USSDBS13, USS-DBS USSDBS11, USS-DBS USSDBS12, USS-DBS USSDBS9, USS-DBS USSDBS10, USS-DBS USSDBS7, USS-DBS USSDBS8, USS-DBS USSDBS5, USS-DBS USSDBS6, USS-DBS USSDBS4

2. Working condition

When USS-DBS 0.1mg series multi-functional electronic balance scale is used under routine test lab or Industrial measuring room, the weighing speed will be much quicker and the result more accurate. Below are the standards of working condition.

1) The working room should be clean and dry.

2) The balance scale should be placed on the steady, fixed table.

3) Better to place the table far away from the door and window in order to avoid the influence of airflow.

4) The table should be put at a place with less vibration such as the corners in the room.

5) The balance should be put far away from sunlight and radiation.

6) Put the balance far away from magnetism.

5

7) Don’t use the balance in dangerous place of explosion.

8) Don’t use the balance under the condition of high humidity and high dust for long.

9) When moving the scale from a colder place to a warmer place, the accuracy and reliability will be influenced by the moisture condensation inside. In order to eliminate this influence, it’s best to put the scale in the working place without power supply for 2 hours.

10) Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.Best temperature for the scale is 20°C -25°C with fluctuation less than 1°C/h.

11) Keep the balance scale clean. Do not stack stuff on the balance scale when not in use.

.

12) Working voltage: AC110 - 240V 50/60Hz DC5V-2A by using the universal adapter.

6