Operating. U.S. Solid USS-DBS USSDBS13, USS-DBS USSDBS11, USS-DBS USSDBS12, USS-DBS USSDBS9, USS-DBS USSDBS10, USS-DBS USSDBS7, USS-DBS USSDBS8, USS-DBS USSDBS5, USS-DBS USSDBS6, USS-DBS USSDBS4

Operating

A. Adjustment

• Check the level meter before operation. If the bubble is not in the center, correct the adjustable feet to make the bubble in the center.

B. Start

• Select an appropriate line voltage and set the voltage switch to the corresponding position.

• For best performance, let the balance scale warm up for 30-60 min. and calibrate it before using.

• Press the key “ON”, the display will light up.

Check the function of the display. About 2 seconds later, the model of the balance will be displayed. For example:

Then the weighing mode:

Press slightly the button “OFF”, the display will go out. If the balance will not be used for a long time, the power plug should be disconnected.

“TAR” Clear and Tare

Put the container on the pan, the weight of the container should be displayed.

7