Sagemcom F@st Plug 501 Duo User Guide


Add to my manuals
2 Pages

advertisement

Sagemcom F@st Plug 501 Duo User Guide | Manualzz

GIR Fast Plug 501_EU-UK recto.ai 1 26/10/2012 10:30:30 F@ST PLUG 501 DUO -

Quick Installation Guide

1

Plug both devices into the mains

2

Connect your equipments

@

Recommended use of a multiple plug adapter

to your equipments

For more information about the way to secure your network or to join a HomePlug AV network, please consult the User Guide available on the http://support.sagemcom.com website.

GIR Fast Plug 501_EU-UK verso.ai 1 26/10/2012 15:15:03 Device is

OFF

.

Device is

ON

.

Device is in «

idle mode

» when LED flashes every 15 sec.

Ethernet port

is not

connected.

Ethernet port

is

connected.

No powerline device detected on your network.

At least one powerline device is detected on your network.

Ethernet port

Use the Ethernet port to connect your equipments using the Ethernet cable provided.

Security button

Press this button between, - 0-3 sec to join a powerline network - 7-10 sec to leave the current powerline network or start a new network - 12-15 sec to return a device to its original factory default configuration

Important :

- Your devices have been already paired during manufacturing and will associate automatically once they are plugged into the mains : no setup is required.

- The security button cannot be used when the device is in idle mode.

For more information on how to increase security on your network or add additional devices to an existing powerline network, please consult the User Guide available on the http://support.sagemcom.com website.

Sagemcom Broadband SAS

Headquarters: 250, route de l’Empereur 92848 Rueil-Malmaison Cedex - FRANCE Tel: +33 (0)1 57 61 10 00 - Fax: +33 (0)1 57 61 10 01 www.sagemcom.com

All rights reserved. The information and speci their respective owners. Simpli fi fi cations included are subject to change without prior notice. Sagemcom Broadband SAS tries to ensure that all information in this document is correct, but does not accept liability for error or omission. Non contractual document. All trademarks are registered by ed joint stock company - Capital 35 703 000 Euros - 518 250 360 RCS Nanterre.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement